Transcript
STOK KODU
ÜRÜN
ÜRÜN ÖZELLİKLERİ
RENK
BİRİM GRUP
FİYAT
Monitor Series SMR1B Monitor Reference Bookshelf Speaker SMR1W
SMR2B Monitor Reference 2 Bookshelf Speaker SMR2W
SMR4B
SMR4W
Monitor Reference 4 Floor Standing Speaker
SMR6B Monitor Reference 6 Floor Standing SMR6W
SMRCB Monitor Reference Centrer Home Theather SMRCW
SMRW10B Monitor Reference W10 Subwoofer SMRW10W
Frequency Response: 55Hz - 30kHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 6 ohms Power Handling (RMS): 70 W Recommended Amplifier (RMS): 15- 70W Bass Alignment: Bass reflex. Rear ported. Drive Unit Compliment: 1 x 5.5" MMP®II bass/mid-range 1 x 1" gold dome C-CAM® Dimensions (H x W x D) 26 x 16.5 x 18 cm Frequency Response 42Hz - 30kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 6 ohms Power Handling (RMS): 100 W Recommended Amplifier (RMS): 30- 100W Bass Alignment: Bass reflex. Front ported. Drive Unit Compliment: 1 x 6.5" MMP®II bass/mid-range 1 x 1" gold dome C-CAM® Tweeter Dimensions 35 x 18.5 x 25 cm Frequency Response 36Hz - 30kHz Recommended Amplifier (RMS) 30-120W Sensitivity (1W@1M) 91 dB Bass Alignment Bass reflex - Ported front and rear Nominal Impedance 6 Ohms Drive Unit Compliment 1 x 6.5" MMP®II bass driver 1 x 6.5" MMP®II mid-range 1 x 1" gold dome C-CAM® Tweeter Power Handling (RMS) 150 W Dimensions (H x W x D) 85 x 18.5 x 25.5 cm Frequency Response33Hz - 30kHz Recommended Amplifier (RMS)40-150W Sensitivity (1W@1M)90 dB Bass AlignmentBass reflex. Ported front and rear. Nominal Impedance6 Ohms Drive Unit Compliment2 x 6.5" MMP®II bass driver 1 x 6.5" MMP®II mid-range 1 x 1" gold dome C-CAM® Tweeter Power Handling (RMS)150 W Dimensions (H x W x D)97 x 20 x 30 cm Frequency Response 60Hz - 30kHz Sensitivity (1W@1M) 91 dB Nominal Impedance 6 Ohms Power Handling (RMS) 150 W Recommended Amplifier (RMS) 40-150W Bass Alignment Bass reflex. Ported front and rear. Drive Unit Compliment 2 x 5.5" MMP®II bass mid-range 1 x 1" gold dome C-CAM® Tweeter Dimensions (H x W x D) 16.5 x 46 x 16.5 cm Low Frequency Limit 28 Hz Upper Frequency Limit 45 - 150 Hz Low Pass Filter Alignment 12dB/octave filter Cabinet Alignment Bass reflex. 18mm construction. Amplifier Output 100 watts Drive Unit Compliment 1 x 10" Long throw driver Input Impedance 20K Ohms Mains Input Voltage 110 - 120 Vac / 220 - 240 Vac Dimensions (H x W x D) 32 x 32 x 34 cm
Black
Çift
A
135 £
Walnut
Çift
A
135 £
Black
Çift
A
175 £
Walnut
Çift
A
175 £
Black
Çift
A
340 £
Walnut
Çift
A
340 £
Black
Çift
A
450 £
Walnut
Çift
A
450 £
Black
Adet
A
115 £
Walnut
Adet
A
115 £
Black
Adet
A
300 £
Walnut
Adet
A
300 £
Black Oak
Çift
A
230 £
White Ash
Çift
A
230 £
Rosmah
Çift
A
230 £
Walnut
Çift
A
230 £
Black Oak
Çift
A
280 £
White Ash
Çift
A
280 £
Rosmah
Çift
A
280 £
Walnut
Çift
A
280 £
Black Oak
Çift
A
560 £
White Ash
Çift
A
560 £
Rosmah
Çift
A
560 £
Bronze BX Series SBRS1B SBRS1W SBRS1R
Bronze BX 1 Bookshelf Speaker
SBRS1WN
SBRS2B SBRS2W SBRS2R
Bronze BX 2 Bookshelf Speaker
SBRS2WN SBRS5B
SBRS5W Bronze BX 5 Floor Standing Speaker SBRS5R
Frequency Response +/- 3dB 55Hz - 30kHz Sensitivity (1W@1m) 88 dB Nominal Impedance 8 Ohms Power Handling (RMS) 70 W Recommended Amplifier (RMS) 15 - 70 W Cabinet Design Rear ported bass reflex. HiVe®II port Crossover Frequency 3.2 kHz Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass mid-range driver. 1 x 25mm (1") gold dome C-CAM® tweeter Dimensions: (HxWxD) 26 x 16.5 x 18 cm Frequency Response +/- 3Db 42Hz - 30kHz Sensitivity (1W@1m) 90 dB Nominal Impedance 8 Ohms Power Handling (RMS) 100 W Recommended Amplifier (RMS) 30 - 100 W Cabinet Design Front ported bass reflex. HiVe®II port technology Crossover Frequency 3.2kHz Drive Unit Complement 1 x 165mm (6 1/2") C-CAM® bass mid-range driver 1 x 25mm (1") gold dome C-CAM® tweeter Dimensions: (HxWxD) 35 x 18.5 x 25.5 cm Frequency Response +/- 3Db 36Hz - 30kHz Sensitivity (1W@1m) 90 dB Nominal Impedance 8 Ohms Power Handling (RMS) 120 W Recommended Amplifier (RMS) 30 - 120 W Cabinet Design Dual chamber bass reflex – Ported front and rear. HiVe®II port technology Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass. 1 x 140mm (5 1/2") C-CAM® bass mid-range driver. 1 x 25 mm (1") gold dome C-CAM® tweeter. Crossover Frequency LF: -6dB @ 400Hz MF/HF: 3.2kHz External Dimensions: (HxWxD ) 85 x 16.6 x 24.8 cm
Bronze BX 5 Floor Standing Speaker
SBRS5WN SBRS6B SBRS6W SBRS6R
Bronze BX 6 Floor Standing Speaker
SBRS6WN SBRSFXB SBRSFXW SBRSFXR
Bronze BX FX Home Theater
SBRSFXWN SBRSCB SBRSCW SBRSCR
Bronze BX FX Center
SBRSCWN SBRSW10B SBRSW10W
Bronze BX W10 Subwoofer
SBRSW10R SBRSW10WN
Nominal Impedance 8 Ohms Power Handling (RMS) 120 W Recommended Amplifier (RMS) 30 - 120 W Cabinet Design Dual chamber bass reflex – Ported front and rear. HiVe®II port technology Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass. 1 x 140mm (5 1/2") C-CAM® bass mid-range driver. 1 x 25 mm (1") gold dome C-CAM® tweeter. Crossover Frequency LF: -6dB @ 400Hz MF/HF: 3.2kHz External Dimensions: (HxWxD ) 85 x 16.6 x 24.8 cm Frequency Response +/- 3Db 34Hz - 30kHz Sensitivity (1W@1m) 90 dB Nominal Impedance 8 Ohms Power Handling (RMS) 150 W Recommended Amplifier (RMS) 40 - 150 W Cabinet Design Dual chamber bass reflex – Ported front and rear. HiVe®II port technology Drive Unit Complement 2 x 165mm (6 1/2") C-CAM® bass drivers. 1 x 165mm (6 1/2") C-CAM® bass mid-range driver. 1 x 25 mm (1") gold dome C-CAM® tweeter Crossover Frequency LF: -6dB @ 600Hz MF/HF: 3.4kHz External Dimensions: (HxWxD ) 98.5 x 18.6 x 31.5 cm Frequency Response +/- 3Db 65Hz - 30kHz Sensitivity (1W@1m) 88 dB Nominal Impedance 8 Ohms Power Handling (RMS) 80 W Recommended Amplifier (RMS) 25 - 80 W Cabinet Design Sealed Cabinet Drive Unit Complement 1 x 140mm (5 1/2") C-CAM® bass mid-range driver. 2 x 25 mm (1") gold dome C-CAM® tweeter Crossover Frequency 2.2 kHz External Dimensions: (HxWxD) 28.7 x 27.6 x 10.5 cm Frequency Response +/- 3Db 60Hz - 30kHz Sensitivity (1W@1m) 90 dB Nominal Impedance 8 Ohms Power Handling (RMS) 120 W Recommended Amplifier (RMS) 20 - 120 W Cabinet Design Sealed Cabinet Drive Unit Complement 2 x 140mm (5 1/2") C-CAM® bass mid-range driver. 1 x 25 mm (1") gold dome C-CAM® tweeter Crossover frequency 3.2 kHz External Dimensions: (H x W x D) 16.6 x 46 x 16.5 cm Low Frequency Limit 27 Hz Upper Frequency Limit 40 – 150 Hz Variable Low Pass Filter Alignment 12dB/Octave variable + 12dB Octave fixed @ 150Hz Amplifier Output 200 W (RMS) Amplifier Classification Class - D Digital amplifier with switch mode PSU Driver Compliment 1 x 10” C-CAM® long throw driver Dimensions: (HxWxD) 32 x 32 x 33 cm Input Impedance 20 K Ohms Standby power consumption 0.17 watts (ErP certified) Mains Input Voltage 110-120 Vac/ 220-240 Vac - 50-60Hz
Walnut
Çift
A
560 £
Black Oak
Çift
A
700 £
White Ash
Çift
A
700 £
Rosmah
Çift
A
700 £
Walnut
Çift
A
700 £
Black Oak
Adet
A
280 £
White Ash
Adet
A
280 £
Rosmah
Adet
A
280 £
Walnut
Adet
A
280 £
Black Oak
Adet
A
160 £
White Ash
Adet
A
160 £
Rosmah
Adet
A
160 £
Walnut
Adet
A
160 £
Black Oak
Adet
A
500 £
White Ash
Adet
A
500 £
Rosmah
Adet
A
500 £
Walnut
Adet
A
500 £
Black
Çift
A
500 £
OAK
Çift
A
500 £
Rosmah
Çift
A
500 £
Walnut
Çift
A
500 £
Black Gloss
Çift
A
500 £
White Gloss
Çift
A
500 £
Black
Çift
A
650 £
Oak
Çift
A
650 £
Rosmah
Çift
A
650 £
Walnut
Çift
A
650 £
Black Gloss
Çift
A
715 £
White Gloss
Çift
A
715 £
Black
Çift
A
1.000 £
OAK
Çift
A
1.000 £
Rosmah
Çift
A
1.000 £
Walnut
Çift
A
1.000 £
Black Gloss
Çift
A
1.100 £
White Gloss
Çift
A
1.100 £
Silver Series SSS1B SSS1O SSS1R
SSS1WN
Silver 1 Bookshelf Speaker
SSS1BG SSS1W SSS2B SSS2O SSS2R SSS2WN
Silver 2 Speaker
SSS2BG SSS2W SSS6B SSS6O SSS6R SSS6WN SSS6BG SSS6W
Silver 6 Floor Standing Speaker
System Format 2-Way Frequency Response 45Hz - 35kHz Sensitivity (1W@1M) 87dB Nominal Impedance 8 Ohms Maximum SPL (dBA) 110.8 (pair) Power Handling (RMS) 100W Recommended Amplifier 40-100W Bass Alignment Bass reflex - rear ported HiVe®II port System Crossover Frequency 3.0kHz Drive Unit Complement 1 x 6" RST® Bass/Mid driver 1 x 1" (25mm) C-CAM® gold dome tweeter Cabinet Dimensions: (Excluding Grille & Terminals) (HxWxD) 31.2 x 18.5 x 24 cm Product External Dimensions: (Including Terminals) (HxWxD) 31.2 x 18.5 x 26.3 cm Product External Dimensions: (Including Grille & Terminals) (HxWxD) 31.2 x 18.5 x 27.5 cm System Format 2-Way Frequency Response 40Hz - 35kHz Sensitivity (1W@1M) 88dB Nominal Impedance 8 Ohms Maximum SPL (dBA) 112.6 (pair) Power Handling (RMS) 120W Recommended Amplifier (RMS) 40-120W Bass Alignment Bass reflex - rear ported HiVe®II port System Crossover Frequency 2.0kHz Drive Unit Complement 1 x 8" RST® Bass/Mid driver 1 x 1" (25mm) C-CAM® gold dome tweeter Grille & Terminals: (HxWxD)37.5 x 23 x 30 cm including Terminals: (HxWxD) 37.5 x 23 x 32.3 cm Including Grille & Terminals: (HxWxD) 37.5 x 23 x 33.5 cm System Format 2 1/2-Way Frequency Response 35Hz - 35kHz Sensitivity (1W@1M) 90dB Nominal Impedance 8 Ohms Maximum SPL (dBA) 115.5 (pair) Power Handling (RMS) 150W Recommended Amplifier (RMS) 60-150W Bass Alignment Dual Chamber, Bass reflex with differential tuning. Twin HiVe®II port System Crossover Frequency LF: 700Hz MF/HF: 2.7kHz Drive Unit Complement 1 x 6" RST® Bass driver. 1 x 6" RST Bass/Mid driver, 1 x 1" C-CAM® gold dome tweeter Cabinet Dimensions excluding Grille, Terminals and Plinth: (H x W x D) 88.5 x 18.5 x 24 cm Terminals: (HxWxD)88.5 x 18.5 x 26.3 cm Grille & Terminals: (HxWxD) 88.5 x 18.5 x 27.5 cm Plinth & Feet: (HxWxD) 93.6 x 24.5 x 30 cm
SSS8B SSS8O SSS8R SSS8WN
Silver 8 Floot Standing Speaker
SSS8BG SSS8W SSS10B SSS10O SSS10R SSS10WN
Silver 10 Floor Standing
SSS10BG SSS10W SSSCB SSSCO SSSCR SSSCWN
Silver Centre Home Theather
SSSCBG SSSCW SSSFXB SSSFXO SSSFXR SSSFXWN
Silver FX Home Theather
SSSFXBG SSSFXW
SSSW12B
SSSW12O
SSSW12R Silver SW12 Subwoofer SSSW12WN
SSSW12BG
SSSW12W
System Format 3 Way Black Frequency Response 32Hz - 35kHz Sensitivity (1W@1M) 90dB Nominal Impedance 4 Ohms OAK Maximum SPL (dBA) 116.8 (pair) Power Handling (RMS) 200W Recommended Amplifier (RMS) 80 - 200W Rosmah Bass Alignment Bass reflex. Twin HiVe®II port System Crossover Frequency LF/MF: 500Hz MF/HF: 2.7kHz Drive Unit Complement 2 x 6" RST® Bass drivers. 1 x 4" RST Walnut Mid-range driver. 1 x 1" (25mm) C-CAM® gold dome tweeter Cabinet Dimensions excluding Grille, Terminals & Plinth: Black Gloss (HxWxD) 100 x 18.5 x 30 cm Terminals: (HxWxD)100 x 18.5 x 32.3 cm Grille & Terminals: (HxWxD)100 x 18.5 x 33.5 cm White Gloss Plinth & Feet: (HxWxD) 102.1 x 24.5 x 36 cm System Format 3 Way Frequency Response 30Hz - 35kHz Sensitivity (1W@1M) 90dB Nominal Impedance 4 Ohms Maximum SPL (dBA) 117.8 (pair) Power Handling (RMS) 250W Recommended Amplifier (RMS) 80 - 200W Bass Alignment Bass reflex. Twin HiVe®II port System Crossover Frequency LF/MF: 550Hz MF/HF: 2.7 kHz Drive Unit Complement 2 x 8" RST® Bass drivers. 1 x 4" RST Mid-range driver. 1 x 1" (25mm) C-CAM® gold dome tweeter Cabinet Dimensions: (H x W x D) (Excluding Grille, Terminals & Plinth) 105 x 23 x 30 cm Dimensions: (H x W x D) (Including Terminals) 105 x 23 x 32.3 cm Dimensions: (H x W x D) (Including Grille & Terminals) 105 x 23 x 33.5 cm Dimensions: (H x W x D) (Including Plinth & Feet)107.1 x 29 System Format 2 Way (M-T-M) Frequency Response 45Hz - 35kHz Sensitivity (1W@1M) 90dB Nominal Impedance 8 Ohms Maximum SPL (dBA) 112.5 Power Handling (RMS) 150W Recommended Amplifier (RMS) 60-150W Bass Alignment Sealed Cabinet Crossover Frequency 2.6kHz Drive Unit Complement 2 x 6" RST® Bass/Mid driver 1 x 1" (25mm) C-CAM® gold dome tweeter Dimensions: (H x W x D) (Excluding Grille & Terminals) 18.5 x 50 x 20 cm Dimensions: (H x W x D) (Including Terminals) 18.5 x 50 x 22.3 cm Dimensions: (H x W x D)(Including Grille & Terminals) 18.5 x 50 x 23.5 cm System Format 2 Way Frequency Response 60Hz - 35kHz Sensitivity (1W@1M) 87dB Nominal Impedance 8 Ohms Maximum SPL (dBA) 110.1 (pair) Power Handling (RMS) 85W Recommended Amplifier (RMS) 40-85W Bass Alignment Sealed Cabinet Crossover Frequency 2.2kHz Drive Unit Complement 1 x 6" RST® Bass/Mid driver 2 x 1" (25mm) C-CAM® gold dome tweeters Cabinet Dimensions: (H x W x D) (Excluding Grille & Terminals) 25 x 31.1 x 13 cm Dimensions: (H x W x D) (Including Terminals) 25 x 31.1 x 13 cm Dimensions: (H x W x D) (Including Grille & Terminals) 25 x 31.1 x 14.3 cm Low Frequency Response 20Hz (Typical IEC room) Upper Frequency Limit 40 - 120Hz Variable Low Pass Filter Alignment Active 4th order 24dB/Octave Amplifier Power Output 500W Continuous Amplifier Classification Class-D amplifier with Switch mode power supply (SMPSU) Bass EQ Profiles 1: Movie, 2: Music, 3: Impact Phase Control 0 & 81 degrees Auto Sensing Line Level >2mV Input Level Requirements Standby after 20 minutes if no signal sensed Driver Compliment 1 x 12" C-CAM® sub-woofer driver featuring triple suspension, 3" long throw voice coil 12v Trigger Input 5 - 12v via 3.5mm mono mini-jack Dimensions: (H x W x D) 34 x 34 x 38 cm (Exc Grille & Amp); 37 x 34 x 41 cm (Including Grille, Amp & Feet) Mains Input Voltage 110 - 120 Vac / 220 - 240 Vac 50/60Hz (Electronically Auto selected) Power Consumption 400 Watts / 0.5 Watts in Standby (ErP approved)
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.375 £
Çift
A
1.375 £
Black
Çift
A
1.500 £
OAK
Çift
A
1.500 £
Rosmah
Çift
A
1.500 £
Walnut
Çift
A
1.500 £
Black Gloss
Çift
A
1.650 £
White Gloss
Çift
A
1.650 £
Black
Adet
A
375 £
OAK
Adet
A
375 £
Rosmah
Adet
A
375 £
Walnut
Adet
A
375 £
Black Gloss
Adet
A
413 £
White Gloss
Adet
A
413 £
Black
Adet
A
500 £
OAK
Adet
A
500 £
Rosmah
Adet
A
500 £
Walnut
Adet
A
500 £
Black Gloss
Adet
A
550 £
White Gloss
Adet
A
550 £
Black
Adet
A
1.000 £
OAK
Adet
A
1.000 £
Rosmah
Adet
A
1.000 £
Walnut
Adet
A
1.000 £
Black Gloss
Adet
A
1.100 £
White Gloss
Adet
A
1.100 £
Piano Black
Çift
A
950 £
White Gloss
Çift
A
950 £
Walnut
Çift
A
950 £
Gold Series SG50B SG50W SG50WN
GX 50 Bookshelf Speaker
System Format: 2 Way Frequency Response: 55 Hz - 60 kHz Sensitivity (1W@1M): 86 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 109.8 dBA Power Handling (RMS): 100 W Recommended Amplifier (RMS): 50 - 100 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.3 kHz Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver1 x C-CAM H.F ribbon transducer Ext Dimensions excl Stand (H x W x D) 30x17x26.3 cm
GX 50 Bookshelf Speaker
SG50E SG100B SG100W
GX 100 Bookshelf Speaker
SG100WN SG100E SG200B
SG200W
GX 200 Floor Standing Speaker
SG200WN SG200E SG300B SG300W
GX 300 Floor Standing Speaker
SG300WN SG300E SGC150B SGC150W SGC150WN
GX CENTRE 150 Home Theather
SGC150E
SGC350B SGC350W SGC350WN
GX CENTRE 350 Home Theather
SGC350E SGFXB SGFXW SGFXWN
GX FX Home Theather
SGXFXR SGCFXE SGW15B
SGW15W GX W15 Subwoofer SGW15N
SGXW15E
Frequency Response: 55 Hz - 60 kHz Sensitivity (1W@1M): 86 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 109.8 dBA Power Handling (RMS): 100 W Recommended Amplifier (RMS): 50 - 100 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.3 kHz Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver1 x C-CAM H.F ribbon transducer Ext Dimensions excl Stand (H x W x D) 30x17x26.3 cm
Çift
A
1.140 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Çift
A
1.250 £
Piano Black
Çift
A
2.300 £
White Gloss
Çift
A
2.300 £
Walnut
Çift
A
2.300 £
Piano Ebony
Çift
A
2.760 £
Piano Black
Çift
A
3.000 £
White Gloss
Çift
A
3.000 £
Walnut
Çift
A
3.000 £
Piano Ebony
Çift
A
3.600 £
Piano Black
Adet
A
650 £
White Gloss
Adet
A
650 £
Walnut
Adet
A
650 £
Piano Ebony
Adet
A
780 £
Piano Black
Adet
A
1.000 £
White Gloss
Adet
A
1.000 £
Walnut
Adet
A
1.000 £
Piano Ebony
Adet
A
1.200 £
Piano Black
Adet
A
700 £
White Gloss
Adet
A
700 £
Walnut
Adet
A
700 £
Piano Rosewood
Adet
A
700 £
Piano Ebony
Adet
A
840 £
Piano Black
Adet
A
1.750 £
White Gloss
Adet
A
1.750 £
Walnut
Adet
A
1.750 £
Piano Ebony
Adet
A
2.100 £
Piano Ebony
System Format: 2 Way Frequency Response: 42 Hz - 60 kHz Piano Black Sensitivity (1W@1M): 88 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 112.6 dBA White Gloss Power Handling (RMS): 120 W Recommended Amplifier (RMS): 60 - 100 W Bass Alignment: Bass reflex. HiVe port system Walnut Crossover Frequency: 2.7 kHz Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer Piano Ebony Ext Dimensions exc Stand (H x W x D) 36.2x21x30.3 cm System Format: 3 Way Frequency Response: 35 Hz - 60 kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 114.5 dBA Power Handling (RMS): 150 W Recommended Amplifier : (RMS): 100 - 150 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: LF - MF: 400 Hz MF - HF: 2.6 kHz Drive Unit Compliment: 2 x 5.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer Ext Dimensions excl Stand (H x W x D) 95.1 x 17 x 30 cm System Format: 3 Way Frequency Response: 30 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 116.8 dBA Power Handling (RMS): 200 W Recommended Amplifier (RMS): 100 - 150 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: LF- MF: 790 Hz MF -HF: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer Ext Dimensions exc Stand (H x W x D) 106 x 21 x 33 cm System Format: 2 Way Frequency Response: 55 Hz - 60 kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 111.5 dBA Power Handling (RMS): 150 W Recommended Amplifier (RMS): 100 - 150 W Bass Alignment: Sealed Cabinet Crossover Frequency: L.F - M.F: 2.8 kHz Drive Unit Compliment: 2 x 5.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 17.2 x 46.1 x 30.3 cm System Format: 3 Way Frequency Response: 40 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 113.8 dBA Power Handling (RMS): 200 W Recommended Amplifier (RMS): 100 - 200 W Bass Alignment: Sealed Cabinet Crossover Frequency: L.F - M.F: 800 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass/mid-range driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 25.4 x 58.1 x 33.3 cm System Format: 2 Way Frequency Response: 60 Hz - 60 kHz Sensitivity (1W@1M): 87 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 110.8 dBA Power Handling (RMS): 100 W Recommended Amplifier: (RMS): 50 - 100 W Bass Alignment: Sealed Cabinet Crossover Frequency: Bi-Pole: 2.3 kHz Di-Pole: 2.6 kHz Drive Unit Compliment: 1 x 6.5" RST bass driver 2 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer 2 x 1" gold dome C-CAM Tweeter Ext Dimensions excl Stand (H x W x D) 31 x 39 x 16 cm Sealed Cabinet. 25mm MDF construction with internal bracing. Sealed amplifier compartment Low Frequency Limit: 18 Hz Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) Amplifier Output 650 watts cont, 1200 watts (peak) Equalisation 4 Settings (Off/Music/Movie/Impact) Drive Unit complem 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil Connections Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) Input Impedance 20 kohms Power Consumption Maximum 1000W. Standby < 0.5W (ErP Compliance) Dimensions (H x W x D) 43 x 40 x 40 cm
GST
GX STAND
Height including spikes 63.5 cm Height without spikes 61.2 cm Base dimensions 28 x 37 cm Top plate dimensions 16 x 25.5 cm Cable exit diameter 2 cm
Çift
A
420 £
Çift
A
3.300 £
Çift
A
3.300 £
Çift
A
3.300 £
Piano Black
Çift
A
6.610 £
Ebony
Çift
A
6.610 £
Rosewood
Çift
A
6.610 £
Piano Black
Çift
A
8.400 £
Ebony
Çift
A
8.400 £
Rosewood
Çift
A
8.400 £
Piano Black
Çift
A
15.750 £
Ebony
Çift
A
15.750 £
Rosewood
Çift
A
15.750 £
Piano Black
Çift
A
2.200 £
Ebony
Çift
A
2.200 £
Rosewood
Çift
A
2.200 £
Platinium II Series SP100B
SP100E
PLATINIUM PL100 II
SP100R
SP200B
SP200E
PLATINIUM PL200 II
SP200R
SP300B
SP300E
PLATINIUM PL300 II
SP300R
SP500B
SP500E
PLATINIUM PL500 II
SP500R
SPC150B
SPC150E
SPC150R
PLATINIUM PLC150 II
System Format 2 Way - 2 Driver Frequency Response (-6dB - IEC 268-13) 40Hz - 100kHz Piano Black Sensitivity (1W@1M) 88dB Maximum S.P.L. 111.8dBA (pair) Nominal Impedance 6Ω (4.5Ω min. @ 160Hz) Power Handling (RMS) 120W Recommended Amplifier (RMS) 60 - 120W Ebony Cabinet Design Single rear HiVe®II port Drive Unit Compliment 1 x 61/2" RDT®II bass / mid driver; 1 x MPD high frequency transducer Crossover Frequency 3.0kHz External Dimensions (H x W x D) 370 x 225 x 285mm Rosewood (149/16 x 87/8 x 111/4”) Weight (each) 14.94kg (32lb 14oz) System Format 3 Way - 4 Driver Frequency Response (-6dB - IEC 268-13) 35Hz - 100kHz Sensitivity (1W@1M) 90dB Maximum S.P.L. 117dBA (pair) Nominal Impedance 4Ω (4.0Ω min. @ 135Hz) Power Handling (RMS) 250W Recommended Amplifier (RMS) 100 - 250W Cabinet Design Two HiVe®II ports Sealed mid-range TLE enclosure Drive Unit Complement 2 x 61/2" RDT®II long-throw bass drivers; 1 x 4" RDT II mid-range driver 1 x MPD high frequency transducer Crossover Frequency ; MF/HF: 3.9kHz, LF/MF: 750Hz External Dimensions (Inc. plinth) (H x W x D) 998 x 360 x 375mm (395/16 x 143/16 x 143/4”) External Dimensions (Inc. feet & spikes) (H x W x D) 1043 x 360 x 375mm (411/16 x 143/16 x 143/4”) Weight (each) 36.08kg (79lb 6oz) System Format 3 Way - 4 Driver Frequency Response 28Hz - 100kHz Sensitivity (1W@1M) 90dB Maximum S.P.L. 117.8dBA (pair) Nominal Impedance 4Ω (4.2Ω min. @ 111Hz) Power Handling (RMS) 300W Recommended Amplifier (RMS) 100 - 300W Cabinet Design Two HiVe®II ports Sealed mid-range TLE enclosure Drive Unit Compliment 2 x 8" RDT®II long-throw bass drivers 1 x 4" RDT II mid-range driver 1 x MPD high frequency transducer Crossover Frequency MF/HF: 3.4kHz, LF/MF: 500Hz External Dimensions (Inc. plinth) (H x W x D) 1113 x 410 x 470mm (4313/16 x 161/8 x 181/2”) External Dimensions (Inc. feet & spikes) (H x W x D) 1158 x 410 x 470mm (459/16 x 161/8 x 181/2”) Weight (each) 54.52kg (120lb) System Format 3 Way - 7 Driver Frequency Response (-6dB - IEC 268-13) 22Hz - 100kHz Sensitivity (1W@1M) 91dB Maximum S.P.L. 120dBA (pair) Nominal Impedance 4Ω (4.2Ω min. @ 120Hz) Power Handling (RMS) 400W Recommended Amplifier (RMS) 150 - 400W Cabinet Design Four HiVe®II ports Sealed mid-range TLE enclosure Drive Unit Compliment 4 x 8" RDT®II long-throw bass drivers 2 x 4" RDT II mid-range driver 1 x MPD high frequency transducer Crossover Frequency MF/HF: 3.6kHz, LF/MF: 460Hz External Dimensions (Inc. plinth) (H x W x D) 1803 x 504 x 626mm (71 x 1913/16 x 245/8”) External Dimensions (Inc. feet & spikes) (H x W x D) 1848 x 504 x 626mm (723/4 x 1913/16 x 245/8”) Weight (each) 99.1kg (218lb) System Format 21/2 Way - 3 Driver Frequency Response (-6dB - IEC 268-13) 45Hz - 100kHz Sensitivity (1W@1M) 89dB Maximum S.P.L. 112dBA Nominal Impedance 6Ω (4.5Ω min. @ 170Hz) Power Handling (RMS) 200W Recommended Amplifier (RMS) 60 - 200W Cabinet Design Single rear HiVe®II port Drive Unit Compliment 1 x 61/2" RDT®II bass driver 1 x 61/2" RDT II bass / mid driver 1 x MPD high frequency transducer Crossover Frequency MF/HF: 3.0kHz, LF/MF: 600Hz (-6dB LF) External Dimensions (H x W x D) 225 x 583 x 291.2mm (2215/16 x 87/8 x 117/16”) Weight (each) 23.98kg (52lb 12oz)
SPC350B
SPC350E
PLATINIUM PLC350 II
SPC350R
SGXFXR
GOLD FX II
SPW215B
SPW215E
PLATINIUM PLW215 ıı
SPW215R
System Format 3 Way - 4 Driver Frequency Response (-6dB - IEC 268-13) 32Hz - 100kHz Sensitivity (1W@1M) 90dB Maximum S.P.L. 114dBA Nominal Impedance 4Ω (4.0Ω min. @ 115Hz) Power Handling (RMS) 250W Recommended Amplifier (RMS) 100 - 250W Cabinet Design Two HiVe®II ports Sealed mid-range TLE enclosure Drive Unit Compliment 2 x 8" RDT®II long-throw bass drivers 1 x 4" RDT II mid-range driver 1 x MPD high frequency transducer Crossover Frequency MF/HF: 3.3kHz, LF/MF: 780Hz External Dimensions (H x W x D) 288 x 800 x 368mm (115/16 x 311/2 x 141/2”) Weight (each) 43.02kg (94lb 10oz) System Format: 2-Way Frequency Response : 60 Hz - 60 kHz Sensitivity (1W@1M) : 87 dB Nominal Impedance (ohms) : 8 Maximum S.P.L (dBA) : 110.8 Power Handling - R.M.S. (W) : 100 Recommended Amplifier (W) : 50 - 100 Bass Alignment : Sealed Cabinet Crossover Frequency Bi-Pole: 2.3 kHz Di-Pole: 2.6 kHz Drive Unit Complement 1 x 61/2" RST® bass driver 2 x 4" RST mid-range driver 1 x C-CAM® H.F ribbon transducer 2 x 1" gold dome C-CAM Tweeter Cabinet Dimensions (HxWxD) : 310 x 390 x 160 mm Complete Dimensions Inc Terminals (HxWxD) 310 x 390 x 168 mm Weight (each) : 11.9kg (26lb 2oz) Amplifier Power Output Dual Amplifier design with a single amplifier powering each driver, Combined 1400W RMS, 2000W Peak (Burst Ratio 1:4 Continuous, Measured into two non-reactive 4 Ohm Loads) Amplifier Classification 2x Class-D amplifiers, Balanced Differential Input, Differentially loaded Power Supply, DSP controlled. High current Switch mode power supply (SMPSU) 172MHz DSP Core with 3500 instructions per sample, 139dB of dynamic range and 56-bit double precision processing, dynamically updated by an 80MHz MCU
Piano Black
Çift
A
3.300 £
Ebony
Çift
A
3.300 £
Rosewood
Çift
A
3.300 £
Piano Rosewood
Çift
A
840 £
Piano Black
Çift
A
3.500 £
Ebony
Çift
A
3.500 £
Rosewood
Çift
A
3.500 £
piano
Çift
A
600 £
piano
Adet
A
420 £
Black Gloss
Çift
A
200 £
White Gloss
Çift
A
200 £
Walnut
Çift
A
200 £
Çift
A
350 £
Çift
A
350 £
Çift
A
350 £
Stand Dimensions: (H x W x D) 615 x 380 x 407mm (Ex feet) 652 x 380 x 407mm (Inc feet & Spikes)
PL100 Stand
PLATINIUM PL100 Stand
Stand Dimensions: (H x W x D) 278 x 580 x 407 mm (Ex feet) 312 x 580 x 407mm (Inc feet & Spikes)
PL350STAND
PLATINIUM 350 STAND
Radius Series SRAD45BL
SRAD45W
Radius 45 HD Subwoofer
SRAD45WN
SRAD90BL
SRAD90W
SRAD90WN
Radius 90 HD Bookshelf Speaker
Frequency Response 120Hz - 20KHz Sensitivity 87dB Nominal Impedance 8 Ohms Power Handling Single (RMS) 25 Watts System Power Handling (RMS) 50 Watts Recommended Amplifier 15-50 Watts Maximum SPL (dBA) 101 Bass Alignment Sealed Cabinet Driver complement 1 x 3" (75mm) MMP2® cone bass/midrange Driver 1 x 3/4" (20mm) C-CAM® gold dome tweeter Dimensions (H x W x D) 10 x 10 x 10 cm 10 x 10 x 12.4 cm (Inc Grille & Terminals) 10 x 10 x 16.2 cm (Inc Grille & Bracket) Bracket Optional - MASM
Frequency Response 80Hz - 35KHz Sensitivity 83dB Nominal Impedance 8 Ohms Black Gloss Power Handling Single (RMS) 75 Watts System Power Handling (RMS) 100 Watts Recommended Amplifier 30-100 Watts Maximum SPL (dBA) 102 Bass Alignment Bass reflex - Rear ported White Gloss Driver complement 1 x 4” (100mm) C-CAM® cone bass/mid driver 1 x 1” (25mm) C-CAM gold dome tweeter (H x W x D) 19.8 x 12.5 x 14 cm (H x W x D)(Inc Grille & Terminals) 19.8 x 12.5 x 16.4 cm Dimensions (H x W x D)(Inc Grille & Bracket) 19.8 x 12.5 Walnut x 20.3 cm Bracket Optional - Monitor Audio Speaker Mount (MASM)
SRAD200BL
SRAD200W
Radius 200 HD Center Speaker
SRAD200WN
SRAD225BL
SRAD225W
Radius 225 HD Center Speaker
SRAD225WN
SRAD270BL
SRAD270W
Radius 270 HD Floor Standing Speaker
SRAD270WN
SRAD1BL
SRAD1W
Radius ONE HD Home Theather
SRAD1WN
SRAD380BL
SRAD380W
Radius 380 HD Subwoofer
SRAD380WN
SRAD390BL
SRAD390W
Radius 390 HD Subwoofer
SRAD390WN
Frequency Response 60Hz - 35KHz Sensitivity 86dB Nominal Impedance 6 Ohms Power Handling Single (RMS) 100 Watts System Power Handling (RMS) 150 Watts Recommended Amplifier 40-150 Watts Maximum SPL (dBA) 106 Bass Alignment Bass reflex - Rear ported Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid driver 1 x 1” (25mm) C-CAM gold dome tweeter Dimensions (H x W x D) 12.5 x 33 x 14 cm Dimensions (H x W x D)(Inc Grille & Terminals) 12.5 x 33 x 16.4 mm Frequency Response 80Hz - 35KHz Sensitivity 87dB Nominal Impedance 6 Ohms Power Handling Single (RMS) 100 Watts System Power Handling (RMS) 150 Watts Recommended Amplifier 40-150 Watts Maximum SPL (dBA) 107 Bass Alignment Bass reflex - Front ported Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid driver 1 x 1” (25mm) C-CAM gold dome tweeter Dimensions (H x W x D) 61 x 14 x 6.7 cm Dimensions (H x W x D)(Inc Grille & Terminals) 61 x 14 x 7.7 cm Dimensions (H x W x D)(Inc Grille & Bracket) 61 x 14 x Frequency Response 50Hz - 35KHz Sensitivity 87dB Nominal Impedance 6 Ohms Power Handling Single (RMS) 100 Watts System Power Handling (RMS) 150 Watts Recommended Amplifier 40-150 Watts Maximum SPL (dBA) 107 Bass Alignment Bass reflex - Front and rear ported Driver complement 2 x 4” (100mm) C-CAM® cone bass/mid driver 1 x 1” (25mm) C-CAM gold dome tweeter Cabinet Dimensions (H x W x D) 100 x 17.7 x 20.8 cm Inc Plinth, Without Spikes Cabinet Dimensions (H x W x D)(Inc Grille & Terminals) 102.5 x 17.7 x 20.8 cm Frequency Response 90Hz - 35KHz Sensitivity 87dB Nominal Impedance 6 Ohms Power Handling Single (RMS) 75 Watts System Power Handling (RMS) 100 Watts Recommended Amplifier 30-100 Watts Maximum SPL (dBA) 106 Bass Alignment C:Bass reflex - Front ported L/R:Bass reflex Side ported Driver complement 3 x 4” (100mm) C-CAM cone bass/mid driver 3 x 1” (25mm) C-CAM gold dome tweeter Dimensions (H x W x D) 17.5 x 98 x 6.7 cm Dimensions (H x W x D)(Inc Grille & Terminals) : 17.5 x 98 x 7.9 cm System Format Active sub-woofer system – Auxiliary (ABR) loading. 18mm MDF cabinet Low Frequency Limit 30Hz (- 6dB) Upper Frequency Limit Variable 40 – 120 Hz @ 24dB/Octave Amplifier Power Output 200 Watts @ 1% THD+N Amplifier Classification Class D amplifier with Switch mode power supply (SMPSU) Auto Sensing Line Level >3.5mV Input Level Requirements Standby after approximately 15 minutes if no signal sensed Driver Compliment 1 x 8” (200mm) C-CAM® long throw driver 1 x 8” (200mm) Auxiliary bass radiator Mains Input Voltage AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V ~ 50/60Hz (Factory Region Preset) Dimensions including amp & feet (HxWxD) 30.8 x 29 x 30.5 cm Power Consumption 200 Watts / 0.5 Watts in Standby (ErP approved) System Format Active sub-woofer system – Auxiliary (ABR) loading. 18mm MDF cabinet Low Frequency Limit 30Hz (- 6dB) Upper Frequency Limit Variable 40 – 120 Hz @ 24dB/Octave Amplifier Power Output 220 Watts @ 1% THD+N Auto SensingLine Level >3.5mV Driver Compliment 1 x 10” (250mm) C-CAM® long throw driver 1 x 10” (250mm) Auxiliary bass radiator Mains Input Voltage AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V ~ 50/60Hz (Factory Region Preset) Dimensions inc amp & feet (HxWxD) 34.8 x 33 x 34.5 cm Power Consumption: 220 Watts / 0.5 Watts in Standby (ErP approved
Black Gloss
Adet
A
200 £
White Gloss
Adet
A
200 £
Walnut
Adet
A
200 £
Black Gloss
Adet
A
275 £
White Gloss
Adet
A
275 £
Walnut
Adet
A
275 £
Black Gloss
Çift
A
700 £
White Gloss
Çift
A
700 £
Walnut
Çift
A
700 £
Black Gloss
Adet
A
500 £
White Gloss
Adet
A
500 £
Walnut
Adet
A
500 £
Black Gloss
Adet
A
500 £
White Gloss
Adet
A
500 £
Walnut
Adet
A
500 £
Black Gloss
Adet
A
600 £
White Gloss
Adet
A
600 £
Walnut
Adet
A
600 £
Black
Çift
A
210 £
White
Çift
A
210 £
Speaker stand for radius stands
RADSTBL Radius Stand HD RADSTW
Apex Series
SAX10B Apex A10 Home Theather SAX10W
SAX40B Apex A40 Home Theather SAX40W
SAW12B Apex AW12 Subwoofer SAW12W
Frequency Response +/- 3dB 60 Hz - 35 KHz Sensitivity (1W@1M) 87 dB Driver Compliment 1 x 140mm (5 1/2") RST® mid-bass driver 1 x 25mm (1") C-CAM® gold dome tweeter Nominal Impedance 8 Ohms Maximum SPL (each) 110.8 dBA Recommended Amplifier (RMS) 25 - 100W Bass Alignment Front ported - bass reflex. HiVE®II port Power Handling (RMS) 100W Crossover Frequency 3.0kHz External Dimensions: (H x W x D) 25 x 14 x 14 cm Frequency Response +/- 3dB 50Hz - 35KHz Sensitivity (1W@1M) 90dB Driver Compliment 2 x 140mm (5 1/2") C-CAM® mid/bass driver with RST® technology. 1 x 25mm (1") C-CAM® gold dome tweeter. Nominal Impedance 8 Ohms Maximum SPL (each) 116.8 dBA Recommended Amplifier (RMS) 50 - 200W Bass Alignment Bass reflex - twin front mounted Dual HiVE®II ports Power Handling (RMS) 200W Crossover Frequency 600Hz & 3.0kHz External Dimensions: (H x W x D) 61 x 14 x 10 cm Amplifier Output 500 Watts (RMS) 1000 Watts (Peak) Low Frequency Limit 27Hz (EQ1) 21Hz (EQ2) Upper Frequency Limit 40 - 120Hz Variable Variable Low Pass Filter Alignment Active 4th order 24dB/octave (two-stage filter) Cabinet Specification Sealed Cabinet with 25mm M.D.F construction and internal bracing. Amplifier Classification Class-D amplifier Driver Compliment 1 x 12" C-CAM® sub-woofer driver featuring triple suspension, 3" long throw voice coil. Dimensions: (H x W x D) 34 x 34 x 41 cm Mains Input Voltage 100 - 120, 220 - 240 Vac, 50/60Hz Speaker stand for Apex series Height 916.50mm x Width 240mm Depth 280mm
AXSTB
Metallic Pearl White High Gloss
Adet
A
300 £
Metallic Black High Gloss
Adet
A
300 £
Metallic Pearl White High Gloss
Adet
A
500 £
Metallic Black High Gloss
Adet
A
500 £
Metallic Pearl White High Gloss
Adet
A
1.000 £
Metallic Black High Gloss
Adet
A
1.000 £
Metallic Pearl White High Gloss
Çift
A
330 £
Metallic Black High Gloss
Çift
A
330 £
Black Cloth
Adet
A
90 £
White
Adet
A
90 £
Black Cloth
Adet
A
90 £
Black Cloth
SET
A
450 £
Apex A10 STAND
AXSTW
Mass Series
SMASS10
MASS 10 Home Thather
SMASS10W
MASS 10 Home Thather
SMASSC
MASS CENTRE Home Theather
SMASS50
MASS 5.0 Home Theather
Frequency Response 80Hz – 30kHz Sensitivity 84dB System Configuration 2- way Driver complement 1 x 4" C-CAM Bass/Mid-range Driver 1 x 25mm C-CAM® tweeter with vented loading system Nominal Impedance 8 Ohms Maximum SPL (each @1M) 104 dBA Power Handling with amplifier crossover set to 100hz (RMS) 100 watts Power Handling (individual) 40 watts Recommended Amplifier 25-100 watts Recommended High Pass Crossover Freq. 80-120Hz Overall Dimensions (H x W x D) 22.4 x 12.8 x 12.8 cm Frequency Response 80Hz – 30kHz Sensitivity 84dB System Configuration 2- way Driver complement 1 x 4" C-CAM Bass/Mid-range Driver 1 x 25mm C-CAM® tweeter with vented loading system Nominal Impedance 8 Ohms Maximum SPL (each @1M) 104 dBA Power Handling with amplifier crossover set to 100hz (RMS) 100 watts Power Handling (individual) 40 watts Recommended Amplifier 25-100 watts Recommended High Pass Crossover Freq 80-120Hz Overall Dimensions (H x W x D) 22.4 x 12.8 x 12.8 cm Frequency Response 80Hz – 30kHz System Configuration 2- way drivers complement 1 x 4" CCAM Bass/Mid-range Driver 1 x 25mm C Nominal Impedance 8 Ohms Maximum SPL (each @1M) 104 dBA Power Handling with amplifier crossover set to 100hz (RMS) 100 watts Power Handling (individual) 40 watts Recommended Amplifier 25-100 watts Recommended High Pass Crossover Freq. 80-120Hz Overall Dimensions (H x W x D) 12.8 x 22.8 x 12.8 cm Home Theater Speaker set Mass 10 22.4 x 12.8 x 12.8 cm Mass Centre 12.8 x 22.8 x 12.8 cm
MASS W200 Subwoofer
SMASSW200
System FormatActive sub-woofer system - Auxilary (ABR) loading. 18mm MDF cabinet (CARB2 approved) Low Frquency Limit 30Hz (-6dB) Upper frequency limit Variable 40 - 120Hz @ 24dB/Octave Amplifier Power Output 220 watts @ 1% THD+N Driver Compliment 1 x 10" (250mm) C-CAM® Long Throw Driver 1 x 10" (260mm) Auxilary bass radiator Mains input voltage 100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present) Dimensions (H x W x D)(Including grilles and feet) 42 x 38.5 x 38.5 cm Power Consumption 200 watts / 0.5 watts in Standby (ErP approved)
Black Cloth
Adet
A
350 £
Black
Çift
A
150 £
OEM
Adet
A
400 £
OEM
Adet
A
500 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
450 £
Adet
A
225 £
Adet
A
225 £
114 cm x 22.2 cm x 22.2 cm WxHxD
MASSST
MASS Stand
Passive Sound Bar
SB2B
Passive Soundbar50" Panel
SB3B
Passive Soundbar50" Panel
Frequency Response (-3dB) : 90Hz – 30kHz Sensitivity (1W@1M) : 84dB Nominal Impedance (ohms) : 8 Power Handling Single - R.M.S. (W) : 40 System Power Handling - R.M.S. (W) : 100 (High pass filter set to 100Hz) Recommended Amp Requirements (W) : 30 - 100 Recommended High Pass Crossover Freq : 80 - 120Hz Maximum SPL (dBA) : 104 (108.8 all channels driven) Bass Alignment : 3 x Auxiliary Bass Reflex (ABR) Drive Unit Complement 3 x 4” (100mm) C-CAM® cone bass/mid driver 3 x 1” (25mm) C-CAM gold dome tweeter Cabinet Dimensions (HxWxD) 145 x 1110 x 89mm (511/16 x 4311/16 x 31/2 inch) External Dimensions Inc Bracket (HxWxD) 145 x 1110 x 100mm (511/16 x 4311/16 x 315/16 inch) Weight (lbs) : 7.64Kg (16lb 12oz) Frequency Response (-3dB) : 90Hz – 30kHz Sensitivity (1W@1M) : 84dB Nominal Impedance (ohms) : 8 Power Handling Single - R.M.S. (W) : 40 System Power Handling - R.M.S. (W) : 100 (High pass filter set to 100Hz) Recommended Amp Requirements (W) : 30 - 100 Recommended High Pass Crossover Freq : 80 - 120Hz Maximum SPL (dBA) : 104 (108.8 all channels driven) Bass Alignment : 3 x Auxiliary Bass Reflex (ABR) Drive Unit Complement 3 x 4” (100mm) C-CAM® cone bass/mid driver 3 x 1” (25mm) C-CAM gold dome tweeter Cabinet Dimensions (HxWxD) 145 x 1110 x 89mm (511/16 x 4311/16 x 31/2 inch) External Dimensions Inc Bracket (HxWxD) 145 x 1110 x 100mm (511/16 x 4311/16 x 315/16 inch) Weight (lbs) : 7.64Kg (16lb 12oz)
Sound Frame Series SSF1B
SSF1W
SF1 Portrait Cumstom Install
SSF1P
SSF2B
SSF2W
SF2 Landscape Cumstom Install
SSF2P
SSF3B
SSF3W
SF3 Landscape Cumstom Install
Frequency Response: 55Hz - 35KHz High Gloss Impedance (nominal): 8 ohms Black Power handling (RMS): 100 W Lacquer Maximum SPL (each @1M): 106 dBA Amplifier (RMS): 25 - 100 W Bass Alignment: Sealed Box High Gloss Crossover Frequency: 550Hz & 3.3KHz White System Configuration: 3 Way Lacquer Driver Compliment: 1 x 165mm (6.5 inches) C-CAM® mid/bass driver with RST®II; 1 x 102mm (4 inches) IDC® midrange driver with dual concentric 25mm (1 inches) C-CAM® Primed gold dome tweeter Finish Inc Frame: (H x W x D) 55.2 x 40.2 x 8.7 mm (Paintable) Cut-out (H x W x D) 50 x 35 x 7.5 cm Frequency Response 55Hz - 35KHz High Gloss Sensitivity (1W@1m) 86 dB Black Impedance (nominal) 8 Ohms Power handling (RMS) 100 W Lacquer Maximum SPL (each @1M) 106 dBA Amplifier (RMS) 25 - 100 W High Gloss Bass Alignment Sealed Box White Crossover Frequency 550Hz & 3.3KHz Lacquer System Configuration 3-Way Driver Compliment 1 x 165mm (6.5 inches) C-CAM® mid/bass driver with RST®II 1 x 102mm (4 inches) IDC® midPrimed range driver with dual concentric 25mm (1 inches) CFinish CAM®gold dome tweeter (Paintable) Inc Frame: (HxWxD) 79 x 24 x 8.7 cm Depth from wall 87.5 mm Frequency Response 75Hz – 35kHz High Gloss Sensitivity 86dB Black System Configuration 2-Way Lacquer Driver Complement 1 x 4" C-CAM mid-range driver 1 x 1" pivoting gold dome tweeter High Gloss Power Handling (RMS) 50W White Maximum SPL (each @1m) 102.5dBA Lacquer Recommended Amplifier (RMS) 25 – 50W Bass Alignment Ported Box Nominal Impedance 8 Ohms Crossover Frequency 3.2kHz Inc Frame:(HxWxD) 28.9 x 28.9 x 7.7 cm Depth from wall: 77.5 mm (3 Inches)
SF3 Landscape Cumstom Install
SSF3P
SSF1BI
SSF1WI
SF1 Portrait Cumstom Install
SSF1PI
SSF2BI
SSF2WI
SF2 Landscape Cumstom Install
SSF2PI
SSF3BI
SSF3WI
SF3 Landscape Cumstom Install
SSF3PI
Frequency Response 75Hz – 35kHz Sensitivity 86dB System Configuration 2-Way Driver Complement 1 x 4" C-CAM mid-range driver 1 x 1" pivoting gold dome tweeter Power Handling (RMS) 50W Maximum SPL (each @1m) 102.5dBA Recommended Amplifier (RMS) 25 – 50W Bass Alignment Ported Box Nominal Impedance 8 Ohms Crossover Frequency 3.2kHz Inc Frame:(HxWxD) 28.9 x 28.9 x 7.7 cm Depth from wall: 77.5 mm (3 Inches) Frequency Response 55Hz - 35KHz Impedance (nominal) 8 Ohms Power handling (RMS) 100 W Maximum SPL (each @1M) 106 dBA Amplifier (RMS) 25 - 100 W Bass Alignment Sealed Box Crossover Frequency 550Hz & 3.3KHz System Configuration 3-Way Driver Compliment 1 x 165mm (6.5 inches) C-CAM® mid/bass driver with RST®II 1 x 102mm (4 inches) IDC® midrange driver with dual concentric 25mm (1 inches) CCAM®gold dome tweeter Inc Frame: (HxWxD) 55.2 x 40.2 x 8.7 cm Cut-out: (HxWxD) 50 x 35 x 7.5 cm Depth from wall : 19 mm (3/4 Inches) Frequency Response 55Hz - 35KHz Sensitivity (1W@1m) 86 dB Impedance (nominal) 8 Ohms Power handling (RMS) 100 W Maximum SPL (each @1M) 106 dBA Amplifier (RMS) 25 - 100 W Bass Alignment Sealed Box Crossover Frequency 550Hz & 3.3KHz System Configuration 3 Way Driver Compliment 1 x 165mm (61/2 inches) C-CAM® mid/bass driver with RST®II 1 x 102mm (4 inches) IDC® midrange driver with dual concentric 25mm (1 inches) CCAM®gold dome tweeter Inc Frame: (Hx WxD) 80.2 x 25.2 x 8.7 cm Cut-out: (HxW xD) 75 x 20 x 7.5 cm Depth from wall 19 mm (3/14 Inches) Frequency Response 75Hz – 35kHz Sensitivity 86dB System Configuration 2-Way Driver Complement 1 x 4" C-CAM mid-range driver 1 x 1" pivoting gold dome tweeter Power Handling (RMS) 50W Maximum SPL (each @1m) 102.5dBA Recommended Amplifier (RMS) 25 – 50W Bass Alignment Ported Box Nominal Impedance 8 Ohms Crossover Frequency 3.2kHz Inc Frame:(HxWxD) 30.1 x 30.1 x 7.7 cm Cut-out: (HxWxD) 25.1 x 25.1 x 5.9 cm Depth from wall : 18 mm (3/4 Inches)
Primed Finish (Paintable)
Adet
A
225 £
High Gloss Black Lacquer
Adet
A
450 £
High Gloss White Lacquer
Adet
A
450 £
Primed Finish (Paintable)
Adet
A
450 £
High Gloss Black Lacquer
Adet
A
450 £
High Gloss White Lacquer
Adet
A
450 £
Primed Finish (Paintable)
Adet
A
450 £
High Gloss Black Lacquer
Adet
A
225 £
High Gloss White Lacquer
Adet
A
225 £
Primed Finish (Paintable)
Adet
A
225 £
White
Adet
B
105 £
White
Adet
B
135 £
White
Adet
B
135 £
Custom Install
SCT165
CT165 Custom Install
SCT165T2
CT165-T2 Custom Install
SCT180
CT180 Custom Install
Frequency Response 60 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88.5 dB Maximum SPL 107.4 dBA Power Handling (RMS) 65 W Recommended Amp Requirements 20 - 65 W Drivers Unit Complement 6.5” MMP®II cone bass driver 1” C-CAM® pivoting gold dome tweeter Adjustment Controls HF Level Switch (+3dB / 0dB / -3dB) Overall Diameter:(including grille) 250 mm Overall Depth:(including grille) 118 mm Cut Out Diameter 211 mm Mounting Depth 114 mm Fixing Type 3 position Tri-Grip® dog leg fixings Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, RoHS2 Compliant) Frequency Response 60 Hz - 25 kHz Impedance (Nominal) 6+6 Ohms Sensitivity (1W@1M) 88.5 dB Maximum SPL 107.9 dBA Power Handling (RMS) 65 W Recommended Amp Requirements 20 - 65 W Drivers Unit Complement 6.5” MMP®II cone bass driver 2 x 1” C CAM® pivoting gold dome tweeters Overall Diameter:(including grille) 250 mm Overall Depth:(including grille) 118 mm Cut Out Diameter 211 mm Mounting Depth 114 mm Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, RoHS2 Compliant) Frequency Response 50 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers Unit Complement 8” MMP®II cone bass driver 1” CCAM® pivoting gold dome tweeter Adjustment Controls HF Level Switch (+3dB / 0dB / -3dB) Diameter:(including grille) 285 mm Depth:(including grille)125 mm Cut Out Diameter 247 mm Mounting Depth 121 mm Construction Material Mineral Filled ABS Plastic
SCT18T2
CT180-T2 Custom Install
SCT265
CT265 Custom Install
SCT265FX
CT265-FX Custom Install
SCT265IDC
CT265-IDC Custom Install
SCT280
CT280 Custom Install
SCT280IDC
CT280IDC Custom Install
SCT380FX
CT380FX Custom Install
Frequency Response 50 Hz - 25 kHz Impedance (Nominal) 6+6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers Unit Complement 8” MMP®II cone bass driver 2 x 1” C-CAM® pivoting gold dome tweeters Overall Diameter:(including grille) 285 mm Overall Depth:(including grille) 125 mm Cut Out Diameter 247 mm Mounting Depth 121 mm Construction Material Mineral Filled ABS Plastic Frequency Response 60 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88.5 dB Maximum SPL 108 dBA Power Handling (RMS) 75 W Recommended Amp Requirements 20 - 75 W Drivers Unit Complement 6.5” C-CAM® cone bass driver 1” C-CAM pivoting gold dome tweeter Overall Diameter:(including grille)250 mm Overall Depth:(including grille)118 mm Cut Out Diameter 211 mm Mounting Depth 114 mm Construction Material Mineral Filled ABS Plastic Frequency Response 60 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88.5 dB Maximum SPL 108 dBA Power Handling (RMS) 85 W Recommended Amp Requirements 20 - 85 W Drivers Unit Complement 6.5” C-CAM® cone bass driver 2 x 1” C-CAM fixed angle gold dome tweeters Overall Diameter:(including grille) 250 mm Overall Depth:(including grille) 153 mm Cut Out Diameter 211 mm Mounting Depth 149 mm Fixing Type 3 position Tri-Grip® dog leg fixings Construction Material Mineral Filled ABS Plastic Frequency Response 60 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88.5 dB Maximum SPL 108 dBA Power Handling (RMS) 85 W Recommended Amp Requirements 20 - 85 W Drivers Unit Complement 6.5” C-CAM® cone bass driver, pivoting IDC module housing: 4” C-CAM RST® inverted mid range driver 1” C-CAM gold dome tweeter Overall Diameter:(including grille) 250 mm Overall Depth:(including grille) 153 mm Cut Out Diameter 211 mm Mounting Depth 149 mm Construction Material Mineral Filled ABS Plastic Frequency Response 50 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers Unit Complement 8” C-CAM® cone bass driver 1” CCAM pivoting gold dome tweeter Overall Diameter:(including grille) 285 mm Overall Depth:(including grille) 125 mm Cut Out Diameter 247 mm Mounting Depth 121 mm Construction Material Mineral Filled ABS Plastic Frequency Response 50 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers Unit Complement 8” C-CAM® cone bass driver, pivoting IDC module housing: 4” C-CAM RST® inverted mid range driver 1” C-CAM gold dome tweeter Overall Diameter:(including grille) 285 mm Overall Depth:(including grille) 160 mm Cut Out Diameter 247 mm Mounting Depth 156 mm Construction Material Mineral Filled ABS Plastic Frequency Response 45 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers Unit Complement 8” C-CAM® cone bass driver featuring RST® 2 x 1” C-CAM fixed angle gold dome tweeters Overall Diameter:(including grille) 285 mm Overall Depth:(including grille) 160 mm Cut Out Diameter 247 mm Mounting Depth 156 mm Construction Material Mineral Filled ABS Plastic
White
Adet
B
170 £
White
Adet
B
155 £
White
Adet
B
180 £
White
Adet
B
215 £
White
Adet
B
185 £
White
Adet
B
245 £
White
Adet
B
420 £
SCT380IDC
CT380IDC Custom Install
SWT165
WT165 Custom Install
SWT180
WT180 Custom Install
SWT265
WT265 Custom Install
SWT280
WT280 Custom Install
SWT280IDC
WT280IDC Cumstom Install
Frequency Response 45 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 112 dBA Power Handling (RMS) 150 W Recommended Amp Requirements 40 - 150 W Drivers Unit Complement 8” C-CAM® cone bass driver featuring RST®pivoting IDC module housing: 4” C-CAM RST inverted mid range driver 1” C-CAM gold dome tweeter Overall Diameter:(including grille) 285 mm Overall Depth:(including grille) 160 mm Cut Out Diameter 247 mm Mounting Depth 156 mm Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, Frequency Response 60 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88.5 dB Maximum SPL 107.4 dBA Power Handling (RMS) 65 W Recommended Amp Requirements 20 - 65 W Drivers Unit Complement 6.5” MMP®II cone bass driver 1” C-CAM® pivoting gold dome tweeter Overall Dimensions:(including grille) (HxW) 370 mm x 250 mm Overall Depth:(including grille) 89.5 mm Cut Out Dimensions:(HxW) 332 mm x 213 mm Mounting Depth 85.5 mm Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, RoHS2 Compliant) Pre-Construction BracketWB6 (Purple) Frequency Response 50 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers Unit Complement 8” MMP®II cone bass driver 1” CCAM® pivoting gold dome tweeter Overall Dimensions:(including grille) (H x W) 441 mm x 288 mm Overall Depth:(including grille) 97.5 mm Cut Out Dimensions:(H x W) 387 mm x 234 mm Mounting Depth 93 mm Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, RoHS2 Compliant) Pre-Construction Bracket WB8 (Green) Frequency Response 55 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88.5 dB Maximum SPL 107.4 dBA Power Handling (RMS) 65 W Recommended Amp Requirements 20 - 65 W Drivers Unit Complement 6.5” C-CAM® cone bass driver 1” C-CAM pivoting gold dome tweeter Overall Dimensions:(including grille) (H x W) 370 mm x 250 mm Overall Depth:(including grille) 89.5 mm Cut Out Dimensions:(H x W) 332 mm x 213 mm Mounting Depth 85.5 mm Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, RoHS2 Compliant) Pre-Construction Bracket WB6 (Purple) Frequency Response 45 Hz - 30 KHz Sensitivity (1W@1M) 90 dB Impedance (Nominal) 6 Ohms Maximum SPL(Single unit in free space) 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers 1 x 8” C-CAM® cone bass driver 1 x 1” C-CAM Pivoting gold dome tweeter Overall Dimensions: (including grille) (H x W) 441 mm x 288 mm Overall Depth:(including grille) 97.5 mm Cut-Out Dimensions: (H x W) 387 mm x 234 mm Mounting Depth 93 mm Cable Connection Gold plated ‘push’ type terminals Construction Material Mineral filled ABS plastic (UL94/V0 Frequency Response 45 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 150 W Recommended Amp Requirements 40 - 150 W Drivers Unit Complement 8” C-CAM® cone bass driver, pivoting IDC module housing: 4” C-CAM RST® inverted mid range driver 1” C-CAM gold dome tweeter Overall Dimensions:(including grille) (H x W) 441 mm x 288 mm Overall Depth:(including grille) 97.5 mm Cut Out Dimensions:(H x W) 387 mm x 234 mm Mounting Depth 93 mm Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, RoHS2 Compliant) Pre-Construction Bracket WB8 (Green)
White
Adet
B
270 £
White
Adet
B
120 £
White
Adet
B
150 £
White
Adet
B
170 £
White
Adet
B
200 £
White
Adet
B
275 £
SWT380IDC
WT380IDC Cumstom Install
Frequency Response 45 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Drivers Unit Complement 8” C-CAM® cone bass driver featuring RST®, pivoting IDC module housing: 4” C-CAM RST inverted mid range driver 1” C-CAM gold dome tweeter Overall Dimensions:(including grille) (H x W) 441 mm x 288 mm Overall Depth:(including grille) 101.5 mm Cut Out Dimensions: (H x W) 387 mm x 234 mm Mounting Dept 97.5 mm Construction Material Mineral Filled ABS Plastic (UL V0 Fire Retardant, RoHS2 Compliant) Pre-Construction BracketWB8 (Green)
Adet
B
350 £
Adet
B
105 £
Adet
B
105 £
OEM
Adet
B
155 £
OEM
Adet
B
155 £
Adet
B
130 £
Adet
B
130 £
Adet
B
160 £
Adet
B
160 £
Adet
B
185 £
White
Custom Install
SCWT140R CWT140 Custom Install SCWT140S
SCWT240R CWT240 Series 200 SCWT240S
SCWT160R CWT160 Custom Install SCWT160S
SCWT180R CWT180 Custom Install SCWT180S
SWT150LCR
WT150-LCR Custom Install
Frequency Response 75Hz - 30kHz Impedance (nominal) 6 Ohms Sensitivity (1W@1M) 85dB Maximum SPL (single unit in free space) 102.8 dBA Power Handling (R.M.S) 50 W Recommended Amp Requirements 10 - 50 W Drive Unit Complement 1 x 4” MMP®II cone bass driver. 1 x 1” (25mm) C-CAM® pivoting gold dome tweeter Acoustic Configuration 2-Way Overall Size Round: 180.2mm Square: 176.7 x 176.7mm Mounting Depth 98.6mm Cut-out Hole Diameter 149mm Cable Connection Gold plated ‘push’ type terminals Grille Attachment Magnetic Construction Material Mineral filled ABS, RoHS compliant Frequency Response 75Hz - 30kHz Impedance (nominal) 6 Ohms Sensitivity (1W@1M) 85dB Maximum SPL (single unit in free space) 102.8 dBA Power Handling (R.M.S) 50 W Recommended Amp Requirements 10 - 50 W Drive Unit Complement 1 x 4” MMP®II cone bass driver. 1 x 1” (25mm) C-CAM® pivoting gold dome tweeter Acoustic Configuration 2-Way Overall Size Round: 180.2mm Square: 176.7 x 176.7mm Mounting Depth 98.6mm Cut-out Hole Diameter 149mm Cable Connection Gold plated ‘push’ type terminals Grille Attachment Magnetic Construction Material Mineral filled ABS, RoHS compliant Frequency Response 60Hz - 30kHz Impedance (nominal) 6 Ohms Sensitivity (1W@1M) 88dB Maximum SPL (single unit in free space) 107.2 dBA Power Handling (R.M.S) 70 W Recommended Amp Requirements 15 - 70 W Drive Unit Complement 1 x 6” MMPII cone bass driver. 1 x 1” (25mm) C-CAM pivoting gold dome tweeter Acoustic Configuration 2-Way Overall Size Round: 204.2mm Square: 199.2 x 199.2mm Mounting Depth 99mm Cut-out Hole Diameter 170mm Cable Connection Gold plated ‘push’ type terminals Grille Attachment Magnetic Construction Material Mineral filled ABS, RoHS compliant Frequency Response 48Hz - 30kHz Impedance (nominal) 6 Ohms Sensitivity (1W@1M) 90dB Maximum SPL (single unit in free space) 110.6 dBA Power Handling (R.M.S) 120 W Recommended Amp Requirements 30 - 120 W Drive Unit Complement 1 x 8” MMPII cone bass driver. 1 x 1” (25mm) C-CAM pivoting gold dome tweeter Acoustic Configuration 2-Way Overall Size Round: 251.7mm Square: 246.7 x 246.7mm Mounting Depth 99.4mm Cut-out Hole Diameter 213mm Construction Material Mineral filled ABS, RoHS compliant Frequency Response 60Hz - 30kHz Impedance (nominal) 8 Ohms Sensitivity (1W@1M) 88dB Maximum SPL (single unit in free space) 108 dBA Power Handling (R.M.S) 100 W Recommended Amp Requirements 30 - 100 W Drive Unit Complement 2 x 5" MMP®II cone bass driver. 1 x 1" (25mm) C-CAM® pivoting gold dome tweeter Acoustic Configuration 2-Way Overall Frame Dimensions 165.8 x 373.6mm without grille 177.4 x 385.2mm - with grille Mounting Depth 100.2mm Cut-out Hole Dimensions Minimum 145 x 353mm
White Grill
White Grill
White Grill
White Grill
SWT250LCR
WT250-LCR Custom Install
Frequency Response 60Hz - 30kHz Impedance (nominal) 8 Ohms Sensitivity (1W@1M) 88dB Maximum SPL (single unit in free space) 108 dBA Power Handling (R.M.S) 100 W Recommended Amp Requirements 30 - 100 W Drive Unit Complement 2 x 5" C-CAM® cone bass driver. 1 x 1" (25mm) C-CAM® pivoting gold dome tweeter White Grill Acoustic Configuration 2-Way Overall Frame Dimensions 165.8 x 373.6mm - without grille 177.4 x 385.2mm - with grille Mounting Depth 100.2mm Cut-out Hole Dimensions Minimum 145 x 353mm Required Clearance for Doglegs in Centre Configuration 400 x 197mm Construction Material Mineral filled ABS, RoHS compliant
Adet
B
250 £
Çift
B
75 £
Çift
B
75 £
Çift
B
75 £
Çift
B
75 £
Adet
B
140 £
Adet
B
200 £
Adet
B
300 £
Adet
B
360 £
Adet
B
180 £
Custom Install SCPC120B
Series 100 CP Ceiling 2"
SCPC120C
Series 100 CP Ceiling 2"
SCPC120S
Series 100 CP Ceiling 2"
SCPC120W
Series 100 CP Ceiling 2"
SCPCT150
CP-CT150 Cumstom Install
SCPCT260
CP-CT260 Cumstom Install
SCPCT380
CP-CT380 Cumstom Install
SCPCT380IDC
CP-CT380 IDC In Ceiling
SCPWT150
CP-WT150
Frequency Response 100 Hz – 20 KHz Impedance (Nominal) 8 Ohms Brass Sensitivity (1W@1M) 85 dB Maximum SPL 101.9 dBA Recommended Crossover frequency 200 Hz Power Handling 20 W 50 W (using crossover) Chrome Recommended Amp Requirements 5 - 20 W 5 - 50 W (using crossover) Drive Unit Complement 2” Full range micro-driver Overall Diameter 80 mm Brushed Overall Depth 96 mm Steel Cut-Out Hole Diameter 65 mm Mounting Depth 91.5 mm Fixing Type 2 x Spring clip fixings White Connection Gold plated "push" type terminals Enclosure Material; Steel Bezel Aluminium Frequency Response 75 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 85 dB Maximum SPL 102.8 dBA Power Handling (RMS) 50 W Recommended Amp Requirements 20 - 50 W Black Body Crossover Frequency / Slope 2.8 kHz @ 12 dB / Octave White Grill Drivers Unit Complement 2-Way 5” MMP®II cone bass driver 1” C-CAM® pivoting gold dome tweeter Overall Diameter:(including grille) 250 mm Overall Depth:(including grille) 155mm Cut Out Diameter 212mm Mounting Depth 151mm Frequency Response 66Hz - 25kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88 dB Maximum SPL 106.9 dBA Power Handling (RMS) 65 W Recommended Amp Requirements 20 - 65 W Black Body Crossover Frequency / Slope 2.6 kHz @ 12 dB / Octave White Grill Drivers Unit Complement 2-Way 6˝ C-CAM® cone bass driver 1˝ C-CAM pivoting gold dome tweeter Overall Diameter:(including grille) 285 mm Overall Depth:(including grille) 155mm Cut Out Diameter 244mm Mounting Depth 151mm Frequency Response 50Hz - 25kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 89 dB Maximum SPL 109.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Black Body Crossover Frequency / Slope 2.5 kHz @ 12dB / Octave Drivers Unit Complement 2-Way 8˝ C-CAM® RST® cone bass White Grill driver 1˝ C-CAM pivoting gold dome tweeter Overall Diameter:(including grille) 309 mm Overall Depth:(including grille) 187mm Cut Out Diameter 274mm Mounting Depth 172.80mm Frequency Response 50Hz - 25kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 89 dB Maximum SPL 109.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Crossover Frequency / Slope 2.5 kHz @ 12dB / Octave Drivers Unit Complement 2-Way 8˝ C-CAM® RST® cone bass driver 1˝ C-CAM pivoting gold dome tweeter Overall Diameter:(including grille) 309 mm Overall Depth:(including grille) 187mm Cut Out Diameter 274mm Mounting Depth 172.80mm Frequency Response 75 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 85 dB Maximum SPL 102.8 dBA Power Handling (RMS) 50 W Recommended Amp Requirements 20 - 50 W Crossover Frequency / Slop 2.8 kHz @ 12 dB / Octave Drivers Unit Complement 2-Way 5” MMP®II cone bass driver 1” C-CAM® pivoting gold dome tweeter Overall Dimensions:(including grille) (H x W) 360.5 x 242 mm Overall Depth:(including grille) 102 mm Cut Out Dimensions:(H x W) 326 x 207 mm Mounting Depth 96 mm
Black Body White Grill
SCPWT260
SCPWT380
CP-WT260 Cumstom Install
CP-WT380
SCPWT380IDC
CP-WT380IDC Cumstom Install
SCPWT140LCR
CP-WT140LCR Cumstom Install
SCPWT240LCR
CP-WT240LCR Custom Install
SCPIW260X
CP-WT260 Custom Install
Frequency Response 65 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88 dB Maximum SPL 106.9 dBA Power Handling (RMS) 65 W Recommended Amp Requirements 20 - 65 W Crossover Frequency / Slope 2.6 kHz @ 12 dB / Octave Black Body Drivers Unit Complement 2-Way 6˝ C-CAM® cone bass White Grill driver 1˝ C-CAM pivoting gold dome tweeter Overall Dimensions:(including grille) (H x W) 415 x 262.5 mm Overall Depth:(including grille) 102 mm Cut Out Dimensions:(H x W) 381 x 228 mm Mounting Depth 96 mm Frequency Response 50 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 89 dB Maximum SPL 109.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Crossover Frequency / Slope 2.5 kHz @ 12 dB / Octave Drivers Unit Complement 2-Way 8” C-CAM® RST® cone bass driver 1” C CAM pivoting gold dome tweeters Overall Dimensions:(including grille) (H x W) 472.5 x 303.5 mm Overall Depth:(including grille) 106 mm Cut Out Dimensions:(H x W) 438 x 269 mm Mounting Depth 99 mm Frequency Response 50 Hz - 30 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 89 dB Maximum SPL 109.6 dBA Power Handling (RMS) 120 W Recommended Amp Requirements 30 - 120 W Crossover Frequency / Slope Bass low pass: 300 Hz @ 6 dB / Octave Mid: 300 Hz @ 6 dB / Octave & 3 kHz @ 12 dB / Octave Drivers Unit Complement 3-Way 8˝ C-CAM® RST® cone bass driver 4˝ C-CAM IDC® cone mid range drive 1˝ C-CAM gold dome tweeter Overall Dimensions:(including grille) (H x W) 472.5 x 303.5 mm Overall Depth:(including grille) 106 mm Cut Out Dimensions:(H x W) 438 x 269 mm Mounting Depth 99 mm Frequency Response 60 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88 dB Maximum SPL 108.8 dBA Power Handling (RMS) 100 W Recommended Amp Requirements 20 - 100 W Crossover Frequency / Slope 2.6 kHz @ 12 dB / Octave Drivers Unit Complement 2 x 4” MMP®II cone bass driver 1” C-CAM® pivoting gold dome tweeter Overall Dimensions: (inc grille) (H x W) 217 x 333 mm Overall Depth:(including grille) 103 mm Cut Out Dimensions:(H x W) 183 x 299 mm Mounting Depth 97 mm
Adet
B
250 £
Black Body White Grill
Adet
B
360 £
Black Body White Grill
Adet
B
420 £
Black Body White Grill
Adet
B
225 £
Adet
B
300 £
Adet
B
850 £
Frequency Response 60 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 88 dB Maximum SPL 108.8 dBA Power Handling (RMS) 100 W Black Body Recommended Amp Requirements 20 - 100 W White Grill Crossover Frequency/Slope 2.6 kHz @ 12 dB/Octave Drivers Unit Complement 2 x 4” C-CAM® cone bass driver 1” C-CAM pivoting gold dome tweeter Overall Dimensions: (including grille) (H x W x D) 217 x 333 x 103 mm Cut Out Dimensions:(H x W x D) 183 x 299 x 97 mm Frequency Response 65 Hz - 25 kHz Impedance (Nominal) 6 Ohms Sensitivity (1W@1M) 89 dB Maximum SPL 106.9 dBA Power Handling (RMS) 65 W Recommended Amplifier 20 - 65 W Crossover Frequency / Slope Bass low pass: 300 Hz @ 6 dB / OEM Octave & 2,6 kHz @ 12 dB / Octave Drivers Unit Complement 2-Way 6˝ C-CAM® RST® cone bass driver 1˝ C-CAM gold dome tweeter Overall Dimensions:(inc grille) (H x W) 415 x 262.5 mm Overall Depth:(including grille) 102 mm Cut Out Dimensions: (H x W) 381 x 228 mm Mounting Depth 96 mm
SCPIW460X
CP-WT460 Custom Install
SCPPLW
PLATINIUM PL II Inwall Custom Install
Frequency Response : 50Hz - 30kHz (-6dB in room) Impedance (Nominal) 6Ω Sensitivity (1W@1M) 89dB Maximum SPL (@1M. Installed/in room) 113.8 dBA Power Handling (RMS) 150W Recommended Amp Requirements 60 - 150W Crossover Frequency / Slope : L.F - 500Hz @ 12dB/Octave M.F -500Hz @ 12dB/Octave. 3KHz @ 18dB/Octave H.F 3KHz @ 18dB/Octave Drivers Unit Complement: 2 x 6.5” C-CAM® Bass drivers 2 x 4” C-CAM Mid-range drivers both with RST cone technology 1 x C-CAM H.F ribbon transducer Adjustment Controls Boundary Compensation (On/Off) MF Level: +1/0/-1 (dB) HF Level: +1/0/-1 (dB) Overall Dimensions:(including grille) (H x W x D) 907 x 257 x 102 mm (35 3/4” x 10 1/8” x 4”) Cut Out Dimensions:(H x W x D) : 880 x 230 x 96 mm Fixing Type 10 x Tri-Grip® Dog leg fixings Construction Material : Cast Polymer enclosure with die-cast Aluminium baffle (RoHS2 Compliant) Weight : 12.98kg (28lb 6oz) Cable Connection : High quality bi-wire terminals System Format : 3 Way - 4 Driver Frequency Response (-6dB) : 52Hz - 100kHz Sensitivity (1W@1M) : 90dB Maximum S.P.L. : 117dBA (pair) Nominal Impedance : 4Ω (3.7Ω min. @ 2.8KHz) Power Handling (RMS) : 200W Recommended Amplifier (RMS) : 100 - 200W Cabinet Design : Sealed Cabinet Drive Unit Complement : 2 x 61/2" RDT®II bass drivers 1 x 4" RDT II mid-range driver, 1 x MPD high frequency transducer Mid/ H.F Crossover Frequency (Hz) : 4.1KHz 3rd Order (18dB/Octave) Bass/Midrange Crossover Frequency (Hz) : 700Hz/ 2nd Order (12dB/Octave) Fixings : 10 x Tri-Grip™ dog leg type fixing system Overall Dimensions (H x W x D) 1205 x 330 x 102 mm (477/16 x 13 x 4 inch) Cut Out Depth 97.5mm (313/16 In.) Weight (each) 27KG (59.4lb)
OEM
Adet
B
1.300 £
OEM
Adet
B
3.150 £
Black Body White Grill
Adet
B
350 £
Black Body
Adet
B
150 £
Black
Adet
B
350 £
OEM
Adet
B
300 £
InWall Subwoofer Series
IWS10
IWS-10 Custom Install
IWB10
IWB-10 Custom Install
IWA250
IWA-250 Custom Install
Frequency Response 28 Hz – 120 Hz (when mounted in optimum enclosure) Impedance (Nominal) 8 Ohms Sensitivity (1W@1M) 86 dB Maximum SPL (Partnered with IWA-250) Single unit 109.8 dB; Pair 115.8 dB Power Handling 150 W Cut-Out Hole Dimensions 280 x 280 mm Mounting Depth 89.98 mm (3 1/2 inches) Connection Gold plated "push" type terminals Construction Materials Mineral Filled ABS Plastic (RoHS2 Compliant) Dimensions (H x W x D) 324 x 324 x 25.6 mm Internal Volume 16.5 Litres Dimensions (H x W x D) 850 x 351 x 85 mm Construction Materials MDF (CARB level 2 approved)
Construction 3mm thick fabricated steel case, moulded ABS front trim panel Low Frequency Response 25 Hz-120 Hz Maximum Power Output 250 W @ 4 Ohms Dimensions (H x W x D) 43.7 x 432 x 263mm
Professional In Ceiling Series
SPROIC65
Pro- In Ceiling 6.5"5 piece carton
Frequency Response 60Hz - 25kHz Impedance 6 Ohms Sensitivity (1W@1m) 87dB Maximum SPL 105dBA Power Handling (RMS) 60W Recommended Amp Requirements 20 - 60W Drive Unit Complement 1" C-CAM® tweeter 6.5" MMP®II driver Cut-out Diameter: 203 mm +1 mm clearance Depth surround/frame to magnet: 74.3 mm Depth including surround/frame: 79.8 mm Depth including grille: 85.2 mm Diameter including surround/frame: 240 mm
SPROIC80
Pro- In Ceiling 8"-5 piece carton
BPROIC65 BPROIC65 BCB4 BCB5 BCB6 BCB8 BCB10 BWB5 BWB6 BWB8 BWB10 BWB4LCR BWB5LCR G20PKCT6SQ G20PKCT8SQ G20PKCPCT8SQ MASMS
Pro IC 65 Pro IC 80 CB4 CB5 CB6 CB8 CB10 WB5 WB6 WB8 WB10 WB4LCR WB5LCR Grille Grille Grille UWB
BSB
SB
Frequency Response 50Hz - 25kHz Impedance 6 Ohms Sensitivity (1W@1m) 88.5 dB Maximum SPL 107.5dBA Power Handling (RMS) 100W Recommended Amp Requirements 30 - 100W Drive Unit Complement 1" C-CAM® tweeter 8" MMP®II driver Cut-out Diameter: 244 mm +1 mm clearance Depth surround/frame to magnet: 90.7 mm Depth including surround/frame: 96.7 mm Depth including grille: 102.6 mm Diameter including surround/frame: 279.5 mm
OEM
Adet
B
375 £
Pre Construction Bracket - 20 pc carton Pre Construction Bracket - 20 pc carton Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket Pre Construction Bracket
OEM
Adet
B
OEM
Adet
B
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
OEM
Adet
A
CT 6.5" & CPCT150 Square grille
OEM
Adet
A
CT 8" & CPCT260 Square grille
OEM
Adet
A
CP-CT380 / 380IDC Square grille
OEM
Adet
A
Universal Wall Bracket
OEM
Adet
A
200 £ 200 £ 20 £ 20 £ 20 £ 20 £ 20 £ 20 £ 20 £ 20 £ 20 £ 20 £ 20 £ 280 £ 420 £ 420 £ 25 £
Soundbar Bracket - AB2, SB2 & SB3
OEM
Adet
A
28 £
Black
Adet
A
280 £
White
Adet
A
280 £
Black
Adet
A
400 £
Consumer Electronic Series
AS150B
Airstream S150
AS150W
SB2B
Soundbar ASB2 Home Theather
Frequency Response : 80Hz - 25kHz Maximum SPL (each @ 1M) : 99dBA Power Output (RMS) : 2 x 25 W Bass,10 W Tweeter Drive Complement : 2 x 3" bass drivers with C-CAM® metal cone technology, 1" Gold C-CAM dome tweeter System Configuration : 'Race-track' profile ABR (Auxiliary Bass Radiator) rear mounted Auxiliary Input Impedance/Sensitivity:10kOhms/300mV Signal to Noise Ratio : 92dB A.C. Input Voltage : 90-264V (auto-range) Amplifier : Category Class D Power Consumption : 0.3 w (standby), 40 w (max) Models Supported : iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPod touch (1st through 5th generation), iPod nano (2nd through 7th generation), iPod classic (2009), iPod classic (2007), iPod classic Works With Any Bluetooth Device Bluetooth Version : 4.0 with aptX support Dimensions (H x W x D) : 274 x 120 x 137mm Colour/Finish : Charcoal Grey with black grille cloth / White with light grey grille cloth Approvals : ETL/ CE/ Fcc/CB/ Erp Weight (each) : 2.26 kg Inputs 3 x HDMI inputs Digital coaxial input (S/PDIF) Digital optical input (Toslink) Analogue stereo RCA inputs, 3.5mm Jack (auto-sensing between each input, via analogue switch) Outputs: HDMI output (supporting ARC) RCA LFE subwoofer output (auto sensing changes filter/crossover settings) Frequency Range 40Hz - 20kHz Drive unit complement 2 x 51/2” (140mm) C-CAM subwoofers 2 x 4” (100mm) C-CAM midrange drivers 2 x 1” (25mm) Gold Dome C-CAM tweeters Amplifier Power Output 160W Connectivity Wireless AirPlay/ DLNA / UPnP music streaming Power input voltage universal 100 - 240Vac, 50 - 60Hz Weight (each) 25lbs 6oz (11.52Kg) Rated Power consumption 200W Standby power consumption <0.5W (increased to 20W when HDMI passthrough is enabled) Decodes: Stereo 5.1 Linear PCM 7.1 Linear PCM Dimensions inc grille, excluding rubber base (HxWxD) 180 x 1005 x 167mm
SB3B
Soundbar ASB3 Home Theather
Inputs 3 x HDMI inputs Digital coaxial input (S/PDIF) Digital optical input (Toslink) Analogue stereo RCA inputs, 3.5mm Jack (auto-sensing between each input, via analogue switch) Outputs: HDMI output (supporting ARC) RCA LFE subwoofer output (auto sensing changes filter/crossover settings) Frequency Range 40Hz - 20kHz Drive unit complement 2 x 51/2” (140mm) C-CAM subwoofers 2 x 4” (100mm) C-CAM midrange drivers 2 x 1” (25mm) Gold Dome C-CAM tweeters Amplifier Power Output 160W Connectivity Wireless AirPlay/ DLNA / UPnP music streaming Power input voltage universal 100 - 240Vac, 50 - 60Hz Weight (each) 25lbs 6oz (11.52Kg) Rated Power consumption 200W Standby power consumption <0.5W (increased to 20W when HDMI passthrough is enabled) Decodes: Stereo 5.1 Linear PCM 7.1 Linear PCM Dimensions inc grille, excluding rubber base (HxWxD) 180 x 1005 x 167mm
Black
Adet
A
500 £
Black
Çift
A
250 £
White
Çift
A
250 £
Black
Çift
A
350 £
White
Çift
A
350 £
Black
Adet
A
200 £
White
Adet
A
200 £
Black
Çift
A
450 £
White
Çift
A
450 £
Climate Series SCL50B Climate 50 Outdoor Speakers SCL50W
SCL60B Climate 60 Outdoor Speakers SCL60W
SCL60T2B Climate 60 T2 Outdoor Speakers SCL60T2W
SCL80B Climate 80 Outdoor Speakers SCL80W
Not: Tüm Fiyatlara KDV ilave edilecektir.
Frequency Response 75Hz - 30KHz Sensitivity (1W@1m) 87 dB Impedance (nominal) 8 Ohms Maximum S.P.L dBA (per pair) 106.8 Power Handling (RMS) 80W Amplifier (RMS) 10-80W Drivers 1 x 140mm (5 1/2”) C-CAM® bass/ mid-range driver 1 x 25mm (1”) C-CAM® gold dome tweeter Ext Dimensions: (H x W x D) 285 x 172.5 x 158.5 mm Total Depth Including Wall Bracket (inches) 210 mm Frequency Response 63Hz - 30KHz Sensitivity (1W@1m) 88 dB Impedance (nominal) 8 Ohms Maximum S.P.L dBA (per pair) 108.8 Power Handling (RMS) 100W Amplifier (RMS) 15 - 100W Drivers 1 x 165mm (6 1/2”) C-CAM® bass/ mid-range driver 1 x 25mm (1”) C-CAM® gold dome tweeter External Dimensions: (H x W x D) 325 x 185 x 178.5 mm Total Depth Including Wall Bracket 235 mm Frequency Response 63Hz - 30KHz Sensitivity (1W@1m) 88 dB Impedance (nominal) 2 x 8 Ohms Maximum S.P.L dBA (per pair) 108.8 Power Handling (RMS) 2 x 50W Amplifier (RMS) 15 - 100W Drivers 1 x 165mm (6 1/2”) C-CAM® bass/ mid-range driver with dual voice coil. 2 x 25mm (1”) C-CAM® gold dome tweeter External Dimensions: (H x W x D) 325 x 185 x 178.5 mm Total Depth Including Wall Bracket 235 mm Frequency Response 50Hz - 30KHz Sensitivity (1W@1m) 89.5 dB Impedance (nominal) 8 Ohms Maximum S.P.L dBA (per pair) 111.1 Power Handling (RMS) 120W Amplifier (RMS) 20 - 120W Drivers 1 x 203mm (8”) C-CAM® bass/ mid-range driver 1 x 25mm (1”) C-CAM® gold dome tweeter External Dimensions: (H x W x D) 405 x 230 x 221 mm Total Depth Including Wall Bracket 272.5 mm
