Transcript
E FIR
STOPPER
Installation Data for the STI 6530, 6531, 6532 & 6533
The Stopper, a unique device, has been helping stop false alarms around the world for decades, without restricting legitimate operation of devices such as fire alarm break glass call points. It consists of a clear, tamper-proof, tough polycarbonate cover and frame that fits over the device to be protected. When lifted to gain access to the device, its optional battery powered integral sounder emits a piercing 96 dB. Immediate attention is drawn to the area and a prankster will either run or be caught. To extend the life and reliability of weather exposed devices refer to the STI6534/ STI6535 Weather Stopper.
1. Position the Stopper frame over the device to be protected. A test key recess facility is located on the right and bottom left of the frame (see diagram A adjacent for details) ensure that either one lines up with the reset on the device then mark the position for the four fixing screws. 2. Drill the holes, using a 7mm masonry drill bit and assemble the frame and hinge mechanism and fit the Stopper with the wall fixings provided. 3. If a surface spacer is included, ensure that the plastic lip of the spacer is pointing upwards. This will provide a base for the hinge (see diagram B adjacent for details).
PRODUCT TO BE PROTECTED REMOVABLE PLASTIC INSERT 30mm SPACER (50mm AVAILABLE) E FIR
COVER DEACTIVATION PIN
E FIR S
EAK
GLAS
BR
S HE
RE
THIS
PRES
P
YU
WA
RAWL PLUG (4) PROVIDED
FRAME GASKET Soli (0)1 44+ Tel:
NB: FOR SURFACE INSTALLATIONS ENSURE THE PLASTIC LIP ON THE SPACER IS IN THIS POSITION
TEST KEY RECESS SCREWS (4) PROVIDED
6501 OPTIONAL NEOPRENE GASKET (USE TWO WITH SPACER)
DIAGRAM A
5. The surface spacer provides cable entry facilities for conduit, cable and trunking. A 30mm depth spacer is supplied as standard. An optional 50mm spacer is available. 6. Where an optional weather gasket is positioned between the Stopper frame and spacer. Ensure the adhesive side of the weather gasket is fixed to the spacer and not the Stopper frame. Replacing the battery (STI 6532 & STI 6533)
e) Ltd rop (Eu land 9 STIhull, Eng21 707299
FRAME
4. Ensure the deactivation pin is removed from the alarm unit on those fitted with integral sounder. The pin should be retained, in the event any maintenance work is carried out.
TEST KEY RECESS FACILITY
To replace the 9V PP3 battery in the alarm unit, replace the deactivation pin, remove the two screws on the underside of the alarm unit and replace battery. Reassemble ensuring to remove the deactivation pin. The pin should be retained.
76mm
Stopper Accessories
48mm 38mm 19mm
89mm 102mm
TEST KEY RECESS FACILITY
STI 6501 Weather Gasket Kit STI 6503 30 mm Spacer
SPACERS ADD STANDARD 30mm 50mm IS ALSO AVAILABLE.
STI 6504 50 mm Spacer
DEPTH CHART FOR THE STOPPER
FRAME
REMOVABLE PLASTIC INSERT TEST KEY RECESS FACILITY
83mm
57mm
30mm SPACER (50mm AVAILABLE)
DIAGRAM B AY
W THIS
F021
Tamper Key
E009
De-activation Pin
STI/BS
Breakable seals (pack of 10)
CKS002
Break Seal Conversion Kit
UP
105mm
NB: FOR SURFACE INSTALLATIONS ENSURE THE PLASTIC LIP ON THE SPACER IS IN THIS POSITION
156mm 140mm
FRONT VIEW FRONT VIEW FRONT VIEW
Installation Tools Required 1. 7mm masonry drill bit 2. Philips head screwdriver
127mm
197mm
SIDE VIEW SIDE VIEW SIDE VIEW
ID6530_6534 • Revised 02/05-003 • Printed in England
Need help? Call our Technical Support Team on Freephone 0800 085 1678 (UK) Tel: 44 (0) 1527 520 999 (UK & Europe)
WEATHER STOPPER
Installation Data for the STI 6534 & 6535
The Weather Stopper is a protective cover that is ideal for extending the life and reliability of weather exposed devices, such as manual call points. It offers protection against harsh environments and conditions both outside and inside, as well as preventing tampering, vandalism and damage from accidental operation.
1. Position the Weather Stopper frame over the device to be protected. A test key recess facility is located on the right & bottom left of the frame (see diagram A adjacent for details) - ensure that either one lines up with the reset on the device then mark the position for the four fixing screws. 2. Drill the holes, using a 7mm masonry drill bit. 3. Position the weather gasket over the device, assemble the frame and hinge mechanism and fit the Weather Stopper over the gasket with the fasteners provided.
CONDUIT GASKET
PRODUCT TO BE PROTECTED
REMOVABLE PLASTIC INSERT 30mm SPACER (50mm AVAILABLE) COVER
E
FIR EAK
S
GLAS
BR
RE
S HE
PRES
IRE
F
Y UP
S WA
THI
RAWL PLUG (4) PROVIDED
FRAME GASKET ) Ltd ope (Eur nd 99 STI ull, Engla1 70729 Solih (0)12 44+ Tel:
NB: FOR SURFACE INSTALLATIONS ENSURE THE PLASTIC LIP ON THE SPACER IS IN THIS POSITION
TEST KEY RECESS SCREWS (4) PROVIDED
6501 NEOPRENE GASKET (USE TWO WITH SPACER)
DIAGRAM A
FRAME
TEST KEY RECESS FACILITY
4. If a surface spacer is to be used, ensure that the plastic lip of the spacer is pointing upwards. This will provide a base for the hinge (see diagram B adjacent). 5. When a surface spacer is used, ensure the extra gasket is fitted between the spacer and frame. The adhesive side of the weather gasket should be fixed to the spacer not the Weather Stopper frame. 6. For surface installations, use the inserts attached to the spacer to blank off any unused cable entry holes. Select and install the appropriate cable gasket for the wiring system installed. Blank gaskets can be supplied and modified on site. The securing of the spacer to the wall will compress the gaskets and seal the unit. 83mm
76mm 89mm 102mm
TEST KEY RECESS FACILITY
105mm 48mm 38mm 19mm
156mm 140mm
197mm
127mm
SPACERS ADD STANDARD 30mm 50mm IS ALSO AVAILABLE.
DEPTH CHART FOR THE WEATHER STOPPER
FRAME TEST KEY RECESS FACILITY
57mm
REMOVABLE PLASTIC INSERT 30mm SPACER (50mm AVAILABLE)
DIAGRAM B THIS
NB: FOR SURFACE INSTALLATIONS ENSURE THE PLASTIC LIP ON THE SPACER IS IN THIS POSITION
P
YU
WA
FRONT VIEW FRONT VIEW
FRONT VIEW
VIEW SIDESIDE VIEW
SIDE VIEW
Installation Tools Required 1. 7mm masonry drill bit 2. Philips head screwdriver
Safety Technology International (Europe) Limited Unit 49G · Pipers Road · Park Farm Ind. Est. · Redditch Worcs · B98 0HU England Tel: +44 (0) 1527 520 999 · Fax: +44 (0) 1527 501 999 E mail:
[email protected] · Web Site: www.sti-europe.com ID6530_6534 • Revised 02/05-003 • PrintedEin England
Need help? Call our Technical Support Team on Freephone 0800 085 1678 (UK) Tel: 44 (0)1527 520 999 (UK & Europe)
FIR
