Transcript
Stroller Model # 015257 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
Safety Precautions Read all instructions before assembly and use of the stroller. Keep instructions for future use.
WARNING
TO AVOID INJURY OR DEATH: FOLLOW THE MANUFACTURER’S INSTRUCTIONS. ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY. USE THE TETHER STRAP AT ALL TIMES TO PREVENT THE STROLLER ROLLING AWAY. DO NOT LEAVE CHILD UNATTENDED. SECURE THE CHILD IN THE HARNESS AT ALL TIMES. DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER. MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE STROLLER, OTHERWISE THEY MAY BE INJURED. Fingers or parts of the body could be injured when the stroller is being folded or unfolded. Please use caution when folding or unfolding the stroller. Check that all safety locks are engaged before placing a child in the stroller. Ensure your child is secured with a correctly adjusted safety harness. Do not allow children to stand on the seat. Do not hang bags or goods from the handle as this could cause the stroller to tip over. Do not place more than 3kgs in the basket or 1kg in the hood pocket (if supplied). The weight of the child using the product should not exceed 17kgs. The height of the child using the product should not exceed 96cm. Use original accessories and manufacturer approved parts only. Never ride with more than one child in the stroller. Always use safety locks. Promptly replace worn out or broken parts. Remove the child from the stroller before going up or down stairs and escalators. To prevent the risk of the stroller catching fire, do not park it near an open fire, heater or barbeque. Do not make any changes or alterations to this product, unless through an approved service agent. To avoid the risk of suffocation, keep all plastic packaging materials out of reach of children. Never leave safety harness connected when not fitted to a child in the stroller as this may create loops that could cause a strangulation hazard. Ensure the storage latch is fully closed when lifting or carrying the stroller. The vehicle is designed for use on flat or gently sloping surfaces and may be unstable on higher and uneven surface, otherwise there may be a possibility of tipping.
Congratulations on your purchase of the Childcare Flip Stroller. This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
Contents Assembly contents list Assembly / Operating instructions How to care for your Childcare Stroller
Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction manual are generic, therefore product fabrics, colour and design may vary from images shown. CNP Brands reserves the right to alter product specifications without notice as a result of our ongoing policy of product improvement.
03
Assembly Contents
Assembly Contents
Check what you have received... You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Front Swivel Wheels
x2
Supplied loose in box: Stroller Frame
x1 Back Wheels
Canopy
x1
x2
Bumper bar x1
Handle
04
x1
Boot cover
x1
05
Assembly / Operating Instructions
Assembly / Operating Instructions
Front swivel / rear wheels assembly
Swivel function
1.
1.
To lock swivel wheels, push lever up
2.
To unlock swivel wheels, push lever down.
Push front wheel firmly onto the mounting point of the swivel front legs, located just above the footrest. Ensure the brake is facing down to ensure wheel is fitted correctly. Push down until the wheel clicks into position. Repeat for the other front wheel. Pull the wheel downwards to make sure it is securely attached to the stroller legs before using.
Lock
Unlock
Lock
Unlock
To use brakes 2.
The rear wheels are distinguished by the holes on the top of the wheel as seen in image.
1.
To lock brakes, push down on each brake lever with foot.
2.
To release brakes, lift each brake lever up with foot.
CAUTION: Always apply both brakes when parking stroller. Rear wheel indication
3.
Push in pop pin whilst pushing downward. Ensure the pop pin ‘clicks’ into place.
Pull the wheel downwards to make sure it is securely attached to the stroller legs before using.
06
07
Assembly / Operating Instructions
Assembly / Operating Instructions
Assemble Handle
Folding the stroller
1.
1.
Before folding the stroller, close the hood and place seat in full lay back position and transfer handle to forward facing mode. Push lever to the side to whilst simultaneously squeezing the handle lock located in the centre of the handle.
2.
Push the handle forward to collapse stroller unit. Push down until the stroller frame clicks into a locked position.
Ensure the bottom of the handle lines up with the bracket. The bracket should be on a 45 degree angle before the handle is inserted.
Ensure this sits at a 45 degree angle
2.
Push down handles until the pop pins either side of the frame click into place.
Unfolding the stroller 1.
Push lever to the side to whilst simultaneously squeezing the handle lock located in the centre of the handle.
2.
Pull the handle up to open the stroller unit. Pull in a short sharp motion to ensure the stroller locks into the open position.
08
09
Assembly / Operating Instructions
Assembly / Operating Instructions
Reversing handle
Attaching the canopy
1.
To reverse handle, pull up on both handle reverse levers situated on each side of handle.
1.
Line up the canopy with the frame as per image. Push into the frame until both sides click into place and are secure.
2.
Reverse handle and lock it into position.
2.
Ensure press stud buttons are secure. These are located on the underside of the canopy.
Handle reverse lever
Inserting the bumper bar 1.
Align bumper bar ends with slots on the arm rest of the stroller frame. Push in the push pins then slide both bumper bar ends until it clicks into place.
2.
To remove bumper bar, push each button located on the side of armrest area and pull bumper bar out.
Removing the canopy 1.
Push in both button’s simultaneously, located on the inside where the canopy is inserted. Pull canopy out of tubing.
Push in button
10
11
Assembly / Operating Instructions
Assembly / Operating Instructions Restraints - Harness
Canopy functions 1.
2.
Pull the canopy cover forward or push backward.
Pull out the visor as per image for the sun visor function.
CAUTION: The canopy must be fully closed before folding the stroller
f
f
1.
To secure the child in the harness, place left hand buckle prong (b) on top of (a).
2.
Hold both left hand buckle prongs (a) and (b) together and insert it into buckle housing (e) until it snaps into position.
3.
Repeat previous steps for right hand buckle prongs (c) and (d).
4.
Once all attached, carefully adjust the harness straps by pulling each slider (f) until the desired fit is achieved in the lap, shoulder and crotch straps.
5.
To release the buckles, squeeze the top and bottom prongs (a) and (b), (c) and (d) together until harness disengages.
CAUTION: Always adjust the harness when changing the seating position of the child.
a
f
c
b
e
d
f
f
(a), (b): Left hand buckle prongs (c), (d): Right hand buckle prongs (e): Buckle housing (f): Strap adjustment sliders
To adjust the seat extension
12
1.
Lower the seat extension by squeezing the bar located underneath the foot rest. By squeezing this bar, it will release the footrest. Push down gently on the footrest to lower.
2.
Raise the seat extension by squeezing the bar and lifting up until the release latches lock into place.
13
Assembly / Operating Instructions
Assembly / Operating Instructions
Adjusting the backrest This stroller has an adjustable backrest. The upright position on the backrest is not suitable for use with children less than six months old. For use with a newborn (0-6mths), the seat should be fully reclined. The backrest should only be adjusted to a more upright position as the child grows older and is able to support their head without assistance.
Forward facing mode When the stroller is in forward facing mode, ensure the swivel function on both dual front
Declining the seat adjuster 1.
To decline the seat adjuster, squeeze the clasp to release and pull in a downward motion. Lower to desired position.
Reverse handle mode 1.
The swivels are now situated under the handle.
2.
The front fixed wheels are fixed.
WARNING: On unmade or uneven surfaces all swivels must be locked.
Inclining the seat adjuster 2.
To incline the seat adjuster; hold both straps and push the clasp whilst sliding upward to desired position.
CAUTION: Do not adjust the backrest while child is in the stroller.
14
15
Assembly / Operating Instructions
How to care for your Childcare stroller
Boot cover
Cleaning
1.
To ensure the long-lasting use of your stroller, dry it with a soft absorbent cloth after use in rainy weather. Use a damp cloth to clean the frame. Do not use abrasive cleaners. After using your stroller on the beach, clean the frame and wheels thoroughly with water to remove the sand and salt. Allow it to dry thoroughly. Removable and non-removeable fabric covers and trims maybe cleaned using a damp cloth with soap or mild detergent. Allow it dry completely before folding or storing it away. Do not dry clean, or use bleach on fabrics or trims. Do not machine wash, tumble or spin dry, unless the care labelling on the product permits these methods.
Wrap the boot cover around the bottom end of the bassinet or seat. Attach press studs as shown in image. Match to the press studs on the inside of the boot cover as shown.
Maintenance 2.
Insert the top flap of the boot cover underneath the bumper bar so it sits on top of the boot cover.
3.
Push firmly on the press studs of both sides to secure it into place.
WARNING: Always remove boot cover before folding the stroller.
Check stroller regularly to ensure that locking devices and components are secure and working properly. Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To maintain the safety of your stroller, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and accessories approved by CNP Brands. If the wheels squeak, use silicone based spray or light oil ensuring it penetrates the wheel and axle assembly. To prevent mould or mildew, do not fold or store the product if it is damp or wet. Allow it to dry thoroughly. Always store the product in a well ventilated area and away from direct sunlight. If you have any difficulties in assembling the stroller, please contact our Service Department. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Tether strap Ensure tether strap is used at all times. Make sure your hand is fed through the loop as shown.
16
17
