Transcript
structured cabling system 2009/10
TABLE OF CONTENTS
A – Keystones • Compact Outlets • Faceplates • Surface Mounted Box Keystones Category 6A 10G Keystones Category 6 Keystones Category 5e Compact Outlets Category 6 Compact Outlets Category 5e Surface Mounted Box Category 6, Category 5e Modular Faceplates
B – Patch Panels
Category 6 Category 5e Back Mount Frame Patch Panel & Wall Mount Type ISDN Panels Navigator Patch System Navigator Patch Panels & Transmitter
C – 110 Cross Connect
110 Wiring Block, 110 Cable Management 110 Connecting Clips, 110 Plugs
D – Copper Patch Cords
Category 6A S/FTP 10G Category 6A U/UTP 10G Category 6 S/FTP, Category 6 U/UTP Category 5e F/UTP, Category 5e U/UTP T-Adapters & Inline Couplers Junction Boxes & Toolless RJ45 Plug Tools
E – Installation Cable
Category 7 Plus S/FTP 1200 MHz Category 7/Category 6A S/FTP 600 MHz Category 6A U/UTP 500 MHz Category 6 U/UTP 250 MHz Category 5e F/UTP Category 5e U/UTP Category 5e U/UTP Outdoor U/UTP Powersum
F – Fiber Optic
Patch Cords Adapters and Connectors Patch Panels, Wall Mount Box FTTH Drop Cable, Flat Type & Zip-cord Cable Distribution Tight Buffer with Aramid Yarn Strength Member Cable Unitube with Glass Yarn Strength Member Cable Steel Armored Unitube with Glass Yarn Strength Membe Cable Non-metallic Multitube with FRP Strength Member Cable Fusion Splicer
G – Cabinets
Network Server Cabinets Network Server Cabinets & Wall Mounted Cabinets Accessories
A1 A2 A3 A4 A5 A6 A7–A8 B1 B2 B3 B4 B5 B6 C1 C2 D1 D2 D3 D4 D5 D6 D7–D8 E1 E2 E3 E4 E5 E6 E7 E8 F1–F2 F3 F4 F5 F6 F7 F8 F9 F10 G1 G2 G3-G4
High Performance for the Future Premium Line Systems Gmbh is a part of global manufacturing group with more than 20 years of experience on the field of data networking market. Premium Line is a comprehensive system solution for the network infrastructure, mainly designed in Europe, with complete product portfolio including patch cords, patch panels, outlets, keystones and workstation components for Category 5 Enhanced, Category 6, Category 6A, Category 7 and fiber optic based structured cabling systems. Since the beginning of the nineties we have been devoted to researching and developing the modern signal transmission cable and the joint hardware. Through almost twenty years of efforts, we succeeded in developing of high performance tested network transmission products. It is a matter of course that our team of professional designers attends to all specific inquiries from our customers worldwide.
Category 6A, Category 6 and Category 5e Premium Line Cabling System delivers endto-end solution for converged networks with high flexibility and proven interoperability to ensure smooth deployment and simplified management. Professional design and advanced leading processes supported by large manufacturing capacities evoke the products to be in great demand. New products development and constant process improvement are two key approaches to maintain the company’s competitiveness. All Premium Line cabling systems installed by an authorized Premium Line Installer or by a System Center are backed by a 25-year warranty. This warranty provides each enduser the confidence of a future-proofed system. In time of high data transmissions and growing demand on bandwidth parameters a proofed networking infrastructure system becomes a must. With Premium Line you can afford this.
PREMIUM LINE CABLING SYSTEM
Premium Line 10G Network Cabling Solution Category 6A 10G Need of 10 Gigabit Service 10 Gigabit Ethernet is nowadays viable solution for destinations with very high data traffic concentration like data center, server farms, MAN’s and backbones. Application as high resolution digital videos, medical imaging, digital animation, CAD/CAM, high speed data storage also require the quality of service (QoS) inherent in 10 Gigabit Ethernet. IP-based services such as VoIP and video will require extended bandwidth. Greater bandwidth is also required as voice, data and video networks are coming into structured cabling systems, as is the case already for today’s more advanced security systems.
Standard of 10 Gigabit In 2002 the IEEE ratified already a 10 Gigabit Ethernet standard for a full duplex fiber technology. Considering the world wide market need, the technology’s potential and the economies offered by copper cabling system, both IEEE and TIA/EIA have now in summer 2006 ratified the new standard IEEE 802.3an TM Category 6A.
Demand of 10 Gigabit Systems As from the experience of the past at the time 100 Mb/s and later on 1 Gb/s were as standards ratified we expect a potential for 10G structured cabling systems in the mass market. Bandwidth will be for many applications in the near future the key issue, so it will be important to invest future proofed in 10G-enable twisted pair structured cabling solutions. Premium Line 10G Cat.6A cabling solution provides transmission performance that exceeds the industry standards for category 6 parameters and supports the operation of 10GBASE-T over 100-meter. 10G Cat.6A cabling solutions are qualified for frequencies up to 500 MHz and deliver guaranteed applications.
Features 1. P erformance conforms to TIA/EIA-568-B.2-10, ISO/IEC 11801:2002 Ed2.0 & Amendment 1 draft, TIATSB-155 draft and EN 50173-1, IEEE 802.3an™ Category 6A specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. Offers total solution of 10G Cat.6A Network Cabling System.
Application • 10GBASE-T Ethernet • 1000BASE-TX Gigabit Ethernet • ATM CB1G • 1000BASE-T Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-TX Ethernet • 155/622 Mbps ATM • 100 Mbps TP-PMD
Keystones • Compact Outlets • Faceplates Surface Mounted Box
Keystones
Outlets
Faceplates
structured cabling system
Keystones • Compact Outlets •Faceplates Surface Mounted Box All Premium Line working area components are designed and engineered to provide maximum flexibility and high performance. Keystone Jacks suitable for communication socket connection between equipment room and working area meet the T568A and T568B wire order and are very compact in appearance. All general wire order labels are marked clearly on the modules for accurate and rapid terminal connection. The terminal connection cap ensures proper wire connection and avoids sliding. Premium Line faceplates combine high capacity with multiple connectors, fit all types of standard keystone jacks or connectors with keystone jack mounted devices. The imbedded frame enables an easy installation and the shutter design protects the module from dust.
Keystones Category 6A 10G
Keystones Category 6
Keystones Category 5e
Compact Outlets Category 6
Compact Outlets Category 5e
Surface Mounted Box Category 6, Category 5e
Modular Faceplates
A1
A2
A3
A4
A5
A6
A7–A8
Keystones
Category 6A 10G Cat 6A Keystone Jack Premium Line Cat6A Keystone Jacks are designed to provide maximum flexibility and high performance for all 10G applications. The products meet all TIA/EIA and IEC 60603-7-5 performance requirements, but also exceed the ISO/IEC 11801 2nd Edition and EN 50173 2nd Edition requirements for transfer impedance. All according to the new ratified standard of IEEE 10 GBase-T standard. The keystones are available in a unshielded version as well as in a solid die-casting shielded version and for both T 568 A and B standards for compatibility with any installation.
Features 1. Performance conforms to 10 Gigabit Ethernet requirements of IEEE P802.3an, and TA/EIA TSB155(draft) Category 6A specifications, and Class E channel requirements of 2nd edition ISO/IEC 11801 and CENELEC EN50173-1, the Cat 6A channel requirements of TIA/EIA-568-B.2-10. 2. Supports T568 A&B Wiring & Easy installation. 3. Terminate using 110 or Krone tools. 4. IDC connector can accept 22-26 AWG solid and stranded cables.
109524010
Approval • 3P Certified Category 6A channel testing performance requirement. • UL/cUL Listed.
Application • 10GBASE-T Ethernet • 1000BASE-TX Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-T Ethernet • Voice, Video and other applications 109121010
170252402
171022402
Category 6A Keystone Jack PART NO.
DESCRIPTION
109211010
Cat.6A 90 ° Shielded Keystone Jack, Dual Type IDC
109524010
Cat.6A 180 ° Die-Casting Keystone Jack
109111010
Cat.6A 90 ° Unshielded Keystone Jack, Dual Type IDC, White
109121010
Cat.6A 180 ° Unshielded Keystone Jack, Dual Type IDC, White
High density Unloaded patch panel
A1
PART NO.
DESCRIPTION
171022402
24 port High Density Unloaded Patch Panel with Plastic Frame, black
170252402
24 port High Density Unloaded Patch Panel with Cable Management Bar, black
structured cabling system
Keystones Category 6
Features 1. Performance conforms to TIA/EIA-568-B.2-1, ISO/IEC 11801 and EN 50173-1 Category 6 specifications. 2. Supports T568 A&B wiring & Easy installation. 3. Offers total solution of your Local Networking Area. 4. CAT6 UTP solid, stranded cables, and keystone jacks. 5. Dual IDC connector can accept 22-26 AWG solid and stranded cables. 6. Terminate using 110 or Krone tools. 7. ETL and 3P CAT.6 unshielded Channel test certified. 8. Color: white other color available on request.
Approval • ETL verified to ANSI/TIA-568-B.2-1 Category 6 Permanent Link. • UL/cUL Listed.
Application • 1000BASE-TX Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-T Ethernet • Voice, Video and other applications
106121010
Specifications Item Material Flame Rating Admissible Conductor Jack contacts
Material or Feature UL 94 V-0 22AWG ~ 26AWG insulation wire Phosphor bronze, 50μinch gold plating over nickel plating in contact area; Operating life: Minimum 750 insertions 100μinch nickel plated over phosphor bronze; Operating life: Minimum 250 Reterminations T568A&B compatible Keystones Cat 6: Category 6, 5e, 5, 3 UL 1863, UL/cUL Listed
IDC contacts Wiring Backward Compatible Safety compliant
106111010
106211010
106114010
Category 6 Keystones PART NO.
DESCRIPTION
106311010
Cat.6 90 ° Unshielded Slim Keystone Jack, Dual Type IDC, white
106111010
Cat.6 90 ° Unshielded Keystone Jack, Dual Type IDC, white
106121010
Cat.6 180 ° Unshielded Keystone Jack, Dual Type IDC, white
106211010
Cat.6 90 ° Shielded Keystone Jack, Dual Type IDC
106524000
Cat.6 180 ° Die-Casting Keystone Jack
106114010
Cat.6 Unshielded Toolless Keystone Jack, white
A2
Keystones Category 5e
Features 1. Performance conforms to TIA/EIA-568-B.2, ISO/IEC 11801 and EN 50173-1 Category 5e specifications. 2. Supports T568 A&B wiring & Easy installation. 3. Offers total solution of your Local Networking Area. 4. CAT5e FTP solid, stranded cables, and keystone jacks. 5. Dual IDC connector can accept 22-26 AWG solid and stranded cables. 6. Terminate using 110 or Krone tools.
Approval • ETL verified channel to ANSI/TIA-568-B.2 Category 5e. • UL/cUL listed.
Application
105311010
• 1000BASE-T Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-T Ethernet • Voice, Video and other applications
Specifications Item Material Flame Rating Admissible Conductor Jack contacts
Material or Feature UL 94 V-0 22AWG ~ 26AWG insulation wire Phosphor bronze, 50μinch gold plating over nickel plating in contact area; Operating life: Minimum 750 insertions 100μinch nickel plated over phosphor bronze; Operating life: Minimum 250 Reterminations T568A&B compatible Keystones Cat 5e: Category 5e, 5, 3 UL 1863, UL/cUL Listed
IDC contacts Wiring Backward Compatible Safety compliant
105114010
Cat 5e Keystones PART NO. 105311010 105111010 105121010 105211010 105524010 Other colors available on request.
A3
105121010
DESCRIPTION Cat.5e 90 ° Unshielded Slim Keystone Jack, Dual Type IDC, white Cat.5e 90 ° Unshielded Keystone Jack, Dual Type IDC Cat.5e 180 ° Unshielded Keystone Jack, Dual Type IDC, white Cat.5e 90 ° Shielded Keystone Jack, Dual Type IDC Cat.5e 180 ° Die-Casting Keystone Jack
ISDN (Cat 3) Keystones PART NO.
DESCRIPTION
103111010
ISDN (Cat.3) 90 ° Unshielded Keystone Jack, Dual Type IDC, white
Tooless keystone PART NO.
DESCRIPTION
105114010
Cat. 5e Unshielded Toolless Keystone Jack, white
105211010
structured cabling system
Compact Outlets Category 6
Premium Line outlets are especially designed for the European market. Their design and high quality metal work are guaranteeing low installation depth for the flexibility and easy installment in practically every application area. On the handling side the outlets fulfill all necessary professional requirements for extremely cost effective installations.
Features 1. Performance conforms to TIA/EIA-568-B.2-1, ISO/IEC 11801 and EN 50173-1 Category 6 specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. Offers total solution of your Local Networking Area. 4. Terminate using 110 or Krone tools. 5. IDC connector can accept 22-26 AWG solid and stranded cables. 6. RAL 9010 or 1013 colors are available.
Approval • ETL verified to ANSI/TIA-568-B.2-1 Category 6 Permanent Link. • UL/cUL Listed.
Application • 1000BASE-TX Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-T Ethernet • Voice, Video and other applications
111621290
111621280
111611290
Category 6 Compact Outlets PART NO.
DESCRIPTION
111621290
Cat. 6 Shielded Compact Outlet, 80 × 80 mm, color RAL 9010
111621280
Cat. 6 Shielded Compact Outlet, 80 × 80 mm, color RAL 1013
111611290
Cat. 6 Unshielded Compact Outlet, 80 × 80 mm, color RAL 9010
111611280
Cat. 6 Unshielded Compact Outlet, 80 × 80 mm, color RAL 1013
112003090
Wall Mounted Back Box 80 × 80 × 45 mm, color RAL 9010
112003080
Wall Mounted Back Box 80 × 80 × 45 mm, color RAL 1013
198000001
RJ45 Dust Stick, white
A4
Compact Outlets Category 5e
111521290
Features 1. Performance conforms to TIA/EIA-568-B.2, ISO/IEC 11801 and EN 50173-1 Category 5e specifications. 2. S upports T568 A&B wiring & Easy installation. 3. O ffers total solution of your Local Networking Area. 4. Dual IDC connector can accept 22-26 AWG solid and stranded cables. 5. Terminate using 110 or Krone tools. 6. C olor: RAL 9010 or 1013.
Approval • ETL verified channel to ANSI/TIA-568-B.2 Category 5e. • UL/cUL Listed.
Application • 1000BASE-T Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-T Ethernet • Voice, Video and other applications
111511290
111511280
Category 5e Compact Outlets
A5
PART NO.
DESCRIPTION
111521290
Cat. 5e Shielded Compact Outlet, 80 × 80 mm, color RAL 9010
111521280
Cat. 5e Shielded Compact Outlet, 80 × 80 mm, color RAL 1013
111511290
Cat. 5e Unshielded Compact Outlet, 80 × 80 mm, color RAL 9010
111511280
Cat. 5e Unshielded Compact Outlet 80 × 80 mm, color RAL 1013
112003090
Wall Mounted Back Box 80 × 80 × 45 mm, color RAL 9010
112003080
Wall Mounted Back Box 80 × 80 × 45 mm, color RAL 1013
112003090
structured cabling system
Faceplates for Modular Outlets
123212090
Keystone Jack Modular Outlets PART NO.
DESCRIPTION
123212090
2-Port 45° Modular outlet for keystone with shutter, 80 × 80 mm, RAL 9010
123212080
2-Port 45° Modular outlet for keystone with shutter, 80 × 80 mm, RAL 1013
Surface Mounted Box Category 6, Category 5e
165211211
166211211
166111211
Surface Mounted Box PART NO.
DESCRIPTION
165111211
Cat.5e Unshielded Mounted Box, PCB Type, Dual Type IDC, 1Port, square, white
165211211
Cat.5e Unshielded Mounted Box, PCB Type, Dual Type IDC, 2Port, square, white
166111211
Cat.6 Unshielded Mounted Box, PCB Type, Dual Type IDC, 1Port, square, white
166211211
Cat.6 Unshielded Mounted Box, PCB Type, Dual Type IDC, 2Port, square, white
A6
Modular Faceplates
Premium Line Keystone Jack Modular Faceplates are precisely compatible with standard brand wall plates. It is an economic solution for keystone inserts while maintaining the existing structures.
Features 1. Secures to any surface, drywall, baseboard, and even modular furniture 2. 100% compatible with standard wall (face) plates 3. Keystone jacks can be snapped in and out easily 4. Comes in models to accommodate 1/2/3/4 inserts and shuttered dust cover 5. Comes with hidden mounting screws and clear outlet ID labels 6. Apply UL-94V-0 high-impact, fire-retardant ABS resin
121121210
121112210
121211210
Keystone Jack Modular Faceplates PART NO.
DESCRIPTION
121111210
Euro II Face Plate, Right-angle, 45 ° Entry, 86 × 86, Snap-In,w/- Shutter, 1-Port, white
121112210
Euro II Face Plate, Right-angle, 45 ° Entry, 86 × 86, Snap-In,w/- Shutter, 2-Port, white
121121210
Euro II Face Plate, Right-angle, 90 ° Entry, 86 × 86, Snap-In,w/- Shutter, 1-Port, white
121122210
Euro II Face Plate, Right-angle, 90 ° Entry, 86 × 86, Snap-In,w/- Shutter, 2-Port, white
121314210
Euro II Face Plate, Right-angle, 45 ° Entry, 86 × 146, Snap-In, w/- Shutter, 4-Port, white
121324210
Euro II Face Plate, Right-angle, 90 ° Entry, 86 × 146, Snap-In, w/- Shutter, 4-Port, white
121211210
Euro III Face Plate, Bevel, 45 ° Entry, 86 × 86, Snap-In, w/- Shutter, 1-Port, white
121212210
Euro III Face Plate, Bevel, 45 ° Entry, 86 × 86, Snap-In, w/- Shutter, 2-Port, white
121221210
Euro III Face Plate, Bevel, 90 ° Entry, 86 × 86, Snap-In, w/- Shutter, 1-Port, white
121222210
Euro III Face Plate, Bevel, 90 ° Entry, 86 × 86, Snap-In, w/- Shutter, 2-Port, white
121414210
Euro III Face Plate, Bevel, 45 ° Entry, 86 × 146, Snap-In, w/- Shutter, 4-Port, white
121424210
Euro III Face Plate, Bevel, 90 ° Entry, 86 × 146, Snap-In, w/- Shutter, 4-Port, white
112005090
Wall mounted back box, 86 × 86× 35, white
112006090
Wall mounted back box, 86 × 146× 35, white
Ivory color on request.
A7
121212210
structured cabling system
Modular Face Plates
121522210
125154010
121521210
125134010
125100210
Keystone Jack Modular Faceplates PART NO.
DESCRIPTION
125134010
1-port keystone module, 45 × 45 mm, French style, white
125154010
1-port keystone module, 22.5 × 45 mm, French style, white
125100210
French Style Face Plate Frame, 80 × 80, white
121521210
French Style Face Plate, Bevel, 90 ° Entry, 80 × 80, Snap-In, w/- Shutter, 1-Port, white
121522210
French Style Face Plate, Bevel, 90 ° Entry, 80 × 80, Snap-In, w/- Shutter, 2-Port, white
Ivory color on request.
121822010
121824010
121826010
Keystone Jack Modular Faceplates – US Type PART NO.
DESCRIPTION
121820010
USA III Blank Face Plate, 70 × 115, white
121821010
USA III Face Plate, 90° Entry, 70 × 115, Integral molding, w/o icon, 1-Port, white
121822010
USA III Face Plate, 90° Entry, 70 × 115, Integral molding, w/o icon, 2-Port, white
121823010
USA III Face Plate, 90° Entry, 70 × 115, Integral molding, w/o icon, 3-Port, white
121824010
USA III Face Plate, 90° Entry, 70 × 115, Integral molding, w/o icon, 4-Port, white
121826010
USA III Face Plate, 90° Entry, 70 × 115, Integral molding, w/o icon, 6-Port, white
A8
Patch Panels
Patch Panels
structured cabling system
Patch Panels
Premium Line Category 6 and Category 5e shielded and unshielded patch panels are suitable for communication socket connection between the equipment room, working area and crossover terminal connection of a RP (Rendezvous Point). Our patch panels have been engineered to meet the T568A and T568B wire order. Their steady and easyto-install design reduces the cost of installation and its operation. Larger face identification space is used for convenient port identification and management.
Patch Panels Category 6
Patch Panels Category 5e
Patch Panels Back Mount Frame Patch Panel & Wall Mount Type
Patch Panels ISDN Panels
Patch Panels Navigator Patch System
Patch Panels Navigator Patch Panels & Transmitter
B1
B2
B3
B4
B5
B6
Patch Panels Category 6
Premium line provides the cutting edge of augmented Category 6 Patch Panel to meet tomorrow’s most advanced and performance-critical applications. The terminal is supplied with T568A and T568B wiring configurations. They allow a quick connection of the wire with high safety and prevent any possible incorrect installation. This product is suitable to Cat6 connecting hardware applications according to EN 50173-1 and ISO/IEC 11801.
176122412
Features
Approval
1. Performance conforms to TIA/EIA-568-B.2-1, ISO/IEC 11801 and EN 50173-1 Category 6 specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. 16(1U)& 24(1U) & 48(2U) Ports available. 4. Offers total solution of your Local Networking Area. 5. Terminate using 110 or Krone tools. 6. Backward compatible to Category 5e, 5, and 3. 7. IDC connector can accept 22-26 AWG solid and stranded cables.
• ETL verified to ANSI/TIA-568-B.2-1 Category 6 Permanent Link. • UL/cUL Listed.
Application • 1000BASE-TX Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-TX Ethernet • Voice, Video and other applications
176212419
Category 6 Unshielded Patch Panels PART NO. DESCRIPTION 176121612 176122412 176124812 176722412
Cat.6 180 ° Unshielded Patch Panel, Dual Type IDC, 16 ports, black Cat.6 180 ° Unshielded Patch Panel, Dual Type IDC, 24 ports, black Cat.6 180 ° Unshielded Patch Panel, Dual Type IDC, 48 ports, black Cat.6 180 ° Unshielded Patch Panel with labeling holder, Dual Type IDC, 24 ports, black
Category 6 Shielded Patch Panels PART NO. DESCRIPTION 176212412 176212419
Cat.6 Shielded Patch Panel , Dual Type IDC, 24 Ports, black Cat.6 Shielded Patch Panel , Dual Type IDC, 24 Ports, light grey RAL 7035
Accessories PART NO.
DESCRIPTION
195000002 198000002
B1
Cable Management Bar for Cat.5e and 6 Unshielded Patch Panel, 16/24 Ports, black Dust Stick, black
176122412
structured cabling system
Patch Panels Category 5e
175722412
Features 1. Meeting the TIA/EIA-568-B. 2 Category 5e Channel Testing Performance requirements. 2. Supports T568 A&B wiring & Easy installation. 3. Dual IDC connector can accept 22-26 AWG solid and stranded FTP cables. 4. Patent Pending: Easy removable rear shielded cover. 5. 16 and 24 ports available. 6. Terminate using 110 or Krone tools. 7. Interoperable and backward compatible to Category 3, 5 and 5e. 8. Offers total solution of your Local Networking Area. 9. All versions can be mounted on 19” EIA racks.
Approval • ETL Channel to ANSI/TIA Category 5e. •U L/cUL Listed.
Application • 10BASE-T Ethernet •1 00BASE-TX Fast Ethernet •1 000BASE-T Fast Ethernet •A nalog voice and digital voice (VoIP) •A nalog (broadband, baseband) and digital video.
175212412
175122412
Category 5e Unshielded Patch Panels PART NO. DESCRIPTION 175121612 175122412 175124812 175722412
Cat.5e 180 ° Unshielded Patch Panel, Dual Type IDC, 16 ports, black Cat.5e 180 ° Unshielded Patch Panel, Dual Type IDC, 24 ports, black Cat.5e 180 ° Unshielded Patch Panel, Dual Type IDC, 48 ports, black Cat.5e 180 ° Unshielded Patch Panel with labeling holder, Dual Type IDC, 24 ports, black
Category 5e Shielded Patch Panels PART NO. DESCRIPTION 175212412 175212419
Cat.5e Shielded Patch Panel , Dual Type IDC, 24 Ports, black Cat.5e Shielded Patch Panel , Dual Type IDC, 24 Ports, light grey RAL 7035
Accessories PART NO.
DESCRIPTION
195000002
Cable Management Bar for Cat.5e and 6 Unshielded Patch Panel, 16/24 Ports, black
B2
Patch Panels
Back Mount Frame Patch Panel
175920612
Features
1. Performance conforms to ANSI/TIA-568-B.2-1, ISO/IEC 11801 and EN 50173-1 Category 6 specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. Terminate using 110 or Krone tools. 5. Backward compatible to Category 5e, 5, and 3. 6. IDC connector can accept 22-26 AWG solid and stranded cables. 7. Labels can be set in the labeling holder easily.
Approval • Compliant with Category 6 Channel Link Testing Performance requirements. • UL/cUL Listed.
Application • 1000BASE-TX Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-TX Ethernet • Voice, Video and other applications
Back Mount Frame Patch Panel PART NO.
DESCRIPTION
175920612
Cat.5e 180 ° Unshielded Back Mount Frame Patch Panel, Dual Type IDC, 6 Ports, black
176920612
Cat.6 180 ° Unshielded Back Mount Frame Patch Panel, Type IDC, 6 Ports, black
Patch Panels Wall Mount
Premiun Line wall mount patch panel guorantees compatibillty with all network, the terminal is supplied with T568A and T568B wiring configurations. The 10” panel effortlessly mount to a wall or desk with 89D bracket.
176421212
Wall Mount Patch Panel PART NO.
DESCRIPTION
175421212
Cat.5e 180 ° Unshielded Wall Mount Patch Panel, Dual Type IDC, 12 Ports, black
176421212
Cat.6 180 ° Unshielded Wall Mount Patch Panel, Dual Type IDC, 12 Ports, black
RJ45 Dust Stick
This Premium Line RJ45 dust stick protect your RJ45 port against dust, corrosion and other harmful elements. It is suitable for all standard RJ45 port. 198000001
RJ45 Dust Stick
B3
PART NO.
DESCRIPTION
198000002
RJ45 Dust Stick, black
198000001
RJ45 Dust Stick, white
structured cabling system
Patch Panels ISDN Panel
Premium Line ISDN Category 3 Patch Panel is high-density telecommunication panel with 25 and 50 Standard RJ-45 jacks. The panel meets all latest standards and electrical parameters and is designed for termination of two pair cable in Krone termination blocks. Printed circuit board together with high quality components ensures the Cat3 performance. Integrated back cable management for separate cables provides organized and secure installation. All ports are numerically identified. The panel is available in 1U height.
173112519
173115019
Specifications 25 port Category 3 ISDN patch panel Front connector RJ-45, 8P8C, connected pins 3-6 Plated by 3 micro inches of gold over nickel Jacks grouped into blocks by 5 pieces, single layer Terminal block 4 position Krone block, 4P4C, all connected Dimensions 43,8 mm (H) × 464,7 mm (W) × 130,5 mm (D)
50 port Category 3 ISDN patch panel Front connector RJ-45, 8P8C,connected pins 3-6 Plated by 3 micro inches of gold over nickel Jacks grouped into blocks by 5 pieces, double layer Terminal block 8 position Krone block, 8P8C, all connected Dimensions 43,8 mm (H) × 464,7 mm (W) × 130,5 mm (D)
173112519
173115019
ISDN (Cat 3) Patch Panels PART NO.
DESCRIPTION
173112512
ISDN (Cat.3) 90 ° Unshielded Patch Panel, Dual Type IDC, 25 Ports, black
173112519
ISDN (Cat.3) 90 ° Unshielded Patch Panel, Dual Type IDC, 25 Ports, light grey RAL 7035
173115012
ISDN (Cat.3) 90 ° Unshielded Patch Panel, Dual Type IDC, 50 Ports, black
173115019
ISDN (Cat.3) 90° Unshielded Patch Panel, Dual Type IDC, 50 Ports, light grey RAL 7035
B4
Patch Panels Navigator Patch System Premium Line Navigator Patch System The patented Navigator Patch System technology is embedded to a regular patch panel to keep the price reasonable. The build in LEDs allow the identification of the cable connection to the workstations quickly and accurately without interfering the network performance. Time-consuming one by one checking with hard to hear tone generators is a thing of the past. Finding the right cable for adds, moves or changes is as easy as turning on a light.
Neatness Using tone generators you may be forced to separate bundled cables due to weak signal. The Navigator Patch System keeps your cabinet neat. Simply connect the signal transmitter to the outlet to find the opposite position at the patch panel. LED Red light on: outlet connected to the network equipment
LED Green light on: Outlet is not connected to the network equipment.
LED light off: No connection between patch panel and outlet on pair 3-6. The LED can be continuous on or flashing, that allows 2 people to check the cabling at the same time.
High Efficiency The horizontal cable installation and patch cord connection are the most time-consuming processes. With Navigator Patch Panel, operators don't have to check the complicated drawing and label patch cords and panels. Navigator Patch Panel can greatly improve the installation efficiency.
Debugging
You can find out the failure by LED display simply, don't need to check the drawing. To maintain the cabling system become easily.
Security
Random port installation and no labeling are helpful to Information security management. Comply with BS 7799 or ISO 27001 standard.
High Efficiency
There is no competitive product to the Navigator Patch System. The difference makes you win the project.
B5
structured cabling system
Patch Panels Navigator Patch Panels & Transmitter Features 1. Performance conforms to TIA/EIA-568-B.2-1, ISO/IEC 11801 and EN 50173-1 Category 5e and 6 specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. Terminate using 110 or Krone tools. 4. Backward compatible to Category 5e, 5, and 3. 5. IDC connector can accept 22-26 AWG solid and stranded cables.
Approval • ETL verified to ANSI/TIA-568-B.2-1 Permanent Link. • ETL verified channel to ANSI/TIA-568-B.2 Category 5e.
Application • 1000BASE-TX Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-TX Ethernet • Voice, Video and other application
PART No.: 194800000 Description: Signal Transmitter for Navigator Patch Panel
175522412
Unshielded Navigator Patch Panel PART NO.
DESCRIPTION
175522412
Cat.5e Unshielded Navigator Patch Panel, Dual Type IDC, 24 ports, black
176522412
Cat.6 Unshielded Navigator Patch Panel, Dual Type IDC, 24 ports, black
175322412
Cat.5e Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 ports, black
176322412
Cat.6 Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 ports, black
175612412
Shielded Navigator Patch Panel PART NO.
DESCRIPTION
175612412
Cat.5e Shielded Navigator Patch Panel, Dual Type IDC, 24 Ports, black
176612412
Cat.6 Shielded Navigator Patch Panel, Dual Type IDC, 24 Ports, black
RAL 7035 on request
176362412
45° Unshielded Navigator Patch Panel with Labeling Holder PART NO.
DESCRIPTION
175362412
Cat.5e 45° Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 ports, black
176362412
Cat.6 45° Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 ports, black
B6
110 Cross Connect
110 Wiring
Block
110 Connecting Clips
structured cabling system
110 Cross Connect
110 wiring blocks provide a dependable, long term system to support data and voice applications. These 110 blocks offer an easy-to-install and economical solution for network managers. They are available in a number of different configurations for specific connectivity applications. For versatile cable management, we offer a cable trough with and without legs for use with the 110 wiring blocks. They provide total access to cable while organizing and maintaining cable bend radius. Connecting Clips will accept 22-26 AWG solid or stranded conductors and are available in 4 and 5 pair sizes.
110 Wiring Block, 110 Cable Management
110 Connecting Clips, 110 Plugs
C1
C2
110 Wiring Block, 110 Cable Management
110 Wiring Block • Exclusively deeper channel to facilitate cabling installations • Ideal for use in cross connects and consolidation point applications • Available with/without legs, and rack mounted for various mounting options • Sturdy one-piece design • Highly visible color coded wiring strip
110 Management • Available with/without legs for a various mounting options • Unique finger design maintains cable bend radius
271310070
271110070
110 Wiring Blocks PART NO.
DESCRIPTION
271105070
110 Wiring Blocks With legs, 50 pairs
271110070
110 Wiring Blocks With legs, 100 pairs
271205070
110 Wiring Blocks Without legs, 50 pairs
271210070
110 Wiring Blocks Without legs, 100 pairs
271310070
110 Rack mounted Wiring Blocks, 100 pairs
271320070
110 Rack mounted Wiring Blocks, 200 pairs
Standard color is ivory.
110 Cable Management PART NO.
DESCRIPTION
272100070
110 Cable Management With legs
272200070
110 Cable Management Without legs
272300070
110 Rack mounted Cable Management
Standard color is ivory.
C1
272100070
structured cabling system
110 Connecting Clips, 110 Plugs
110 Connecting Clips • Available in 4- or 5-pair connection blocks • Dual IDC terminates UTP cable on 110 base and UTP cable or 110 patch cords for cross connecting • Highly visible color-coded wiring slots facilitate the wiring • Applicable with single or multiple punch down tools • Made of UL 94V-0 high impact polycarbonate material
110 Plugs • Contains two piece, snap together housing • Field terminable • Cable clamp on cover provides easier wiring • IDC‘s provide reliable gas-tight connections • Polarized to prevent reverse installation to connector block • Clear polycarbonate cover keeps conductors visible after termination
273500570
273500470
281100000
110 Wiring Connecting Clips PART NO.
DESCRIPTION
273500470
110 Wiring Connector, 4 pairs
273500570
110 Wiring Connector, 5 pairs
Standard color is ivory.
110 Patch Cord Plug PART NO.
DESCRIPTION
281100000
110 Patch Plug, 1 pair, 3u”
281200000
110 Patch Plug, 2 pair, 3u”
281400000
110 Patch Plug, 4 pair, 3u”
C2
Copper Patch Cords
Patch Cords T-Adapters Inline Couplers Tools
structured cabling system
Copper Patch Cords
High quality Premium Line Category 6 and Category 5e patch cords are produced in compliance with all EIA/TIA568-A standards and are tested by independent laboratories. There is a variety of unshielded, single- and double-shielded patch cords in a standard production as well as a wide range of lengths and colors. Customized production is available on customers’ request. Inline couplers and Connection boxes allow a simple operation with Installation cables, which can be easily extended. Broken cables can be coupled with no need to lay new complete cable segment. Connection boxes can be used for all standard 4- to 8-wire installation cables of 26-22 AWG up to 10 mm outer diameter.
Patch Cords Category 6A S/FTP 10G
Patch Cords Category 6A U/UTP 10G
Patch Cords Category 6 S/FTP, Category 6 U/UTP
Patch Cords Category 5e F/UTP, Category 5e U/UTP
T-Adapters and Inline Couplers
Junction Boxes & Toolless RJ45 Plug
Tools
D1 D2 D3 D4 D5 D6 D7-D8
Patch Cords
Category 6A S/FTP 10G Patch Cord The Premium Line Cat6A 10G patch cord exhibits an inspiring performance via the patented plug design. With the Pair Individual Metal (Aluminum) Foiled structure (PIMF/ S/FTP), Premium Line Cat6A 10G patch cord provides the best performance to against the Alien Crosstalk, and supports both equipment cord and consolidation point applications. The electrical performance of the Premium Line Cat6A 10G patch cord is guaranteed to meet or exceed the specifications of the current TIA Category 6A and proposed ISO/IEC Class EA Ed. 2.1 up to 500 MHz when used as a part of a Cat6A 10G Channel, and channel specification of TIA 568-B.2-1 Category 6, ISO/IEC 11801 Class E.
Features 1. Backward compatible with Category 6, 5e, and 5 connectors 2. Supports network line speeds up to 10 Gigabits per second 3. Qualifies for the Premium Line 25-year system warranty when included as a part of the registered Premium Line Cat6A 10G Channel 4. LSOH jacket 5. 3P, ETLverified, UL/cUL listed
S/FTP Category 6A Patch Cords Length
Grey
Green
Blue
Red
Yellow
0,5 m
189420055
189420056
189420054
189420053
189420058
1 m
189420105
189420106
189420104
189420103
189420108
2 m
189420205
189420206
189420204
189420203
189420208
3 m
189420305
189420306
189420304
189420303
189420308
5 m
189420505
189420506
189420504
189420503
189420508
7 m
189420705
189420706
189420704
189420703
189420708
10 m
189421005
189421006
189421004
189421003
189421008
Other lengths, colors or PVC cables on request
D1
structured cabling system
Patch Cords
Category 6A U/UTP 10G Patch Cord The Premium Line Cat6A 10G patch cord exhibits an inspiring performance via the patented plug design. Premium Line Cat6A 10G patch cord provides the best performance to against the Alien Crosstalk, and supports both equipment cord and consolidation point applications. The electrical performance of the Premium Line Cat6A 10G patch cord is guaranteed to meet or exceed the specifications of the current TIA Category 6A and proposed ISO/IEC Class EA Ed. 2.1 up to 500 MHz when used as a part of a Cat6A 10G Channel, and channel specification of TIA 568-B.2-1 Category 6, ISO/IEC 11801 Class E.
Features 1. Backward compatible with Category 6, 5e, and 5 connectors 2. Supports network line speeds up to 10 Gigabits per second 3. Qualifies for the Premium Line 25-year system warranty when included as a part of the registered Premium Line Cat6A 10G Channel 4. 3P, ETLverified, UL/cUL listed
U/UTP Category 6A Patch Cords Length
Grey
Green
Blue
Red
Yellow
0,5 m
189110055
189110056
189110054
189110053
189110058
1 m
189110105
189110106
189110104
189110103
189110108
2 m
189110205
189110206
189110204
189110203
189110208
3 m
189110305
189110306
189110304
189110303
189110308
5 m
189110505
189110506
189110504
189110503
189110508
7 m
189110705
189110706
189110704
189110703
189110708
10 m
189111005
189111006
189111004
189111003
189111008
Other lengths, colors or halogen free cables on request
D2
Patch Cords
Category 6 S/FTP 50 mirco inch Gold Plated on the Plug Connects 100% Performance Test WIRING: 568A TO 568A; 568B TO 568B; 568A TO 568B In compliance with TIA/EIA568A, EN50173, ISO/IEC11801 TIA/EIA Bulletin TSB67 For Wire Requirements TIA/EIA TSB40-A & TSB36 3P, ETLverified, UL/cUL listed Specification 26AWG, 7/0.16 mm S/FTP Category 6 Patch Cords Length
Grey
Green
Blue
Red
Yellow
0,5 m
186410055
186410056
186410054
186410053
186410058
1 m
186410105
186410106
186410104
186410103
186410108
2 m
186410205
186410206
186410204
186410203
186410208
3 m
186410305
186410306
186410304
186410303
186410308
5 m
186410505
186410506
186410504
186410503
186410508
7 m
186410705
186410706
186410704
186410703
186410708
10 m
186411005
186411006
186411004
186411003
186411008
Other lengths, colors or halogen free cables on request
Patch Cords
Category 6 U/UTP 50 mirco inch Gold Plated on the Plug Connects 100% Performance Test WIRING: 568A TO 568A; 568B TO 568B; 568A TO 568B In compliance with TIA/EIA568A, EN50173, ISO/IEC11801 TIA/EIA Bulletin TSB67 For Wire Requirements TIA/EIA TSB40-A & TSB36 3P, ETLverified, UL/cUL listed Specification 24AWG, 7/0.196 mm U/UTP Category 6 Patch Cords Length
Grey
Green
Blue
Red
Yellow
0,5 m
186110055
186110056
186110054
186110053
186110058
1 m
186110105
186110106
186110104
186110103
186110108
2 m
186110205
186110206
186110204
186110203
186110208
3 m
186110305
186110306
186110304
186110303
186110308
5 m
186110505
186110506
186110504
186110503
186110508
7 m
186110705
186110706
186110704
186110703
186110708
10 m
186111005
186111006
186111004
186111003
186111008
Other lengths, colors or halogen free cables on request
D3
structured cabling system
Patch Cords
Category 5e F/UTP 50 mirco inch Gold Plated on the Plug Connects 100% Performance Test WIRING: 568A TO 568A; 568B TO 568B; 568A TO 568B In compliance with TIA/EIA568A, EN50173, ISO/IEC11801 TIA/EIA Bulletin TSB67 For Wire Requirements TIA/EIA TSB40-A & TSB36
3P, ETLverified, UL/cUL listed Specification 26AWG, 7/0.16 mm
F/UTP Category 5e Patch Cords Length
Grey
Green
Blue
Red
Yellow
0,5 m
185210055
185210056
185210054
185210053
185210058
1 m
185210105
185210106
185210104
185210103
185210108
2 m
185210205
185210206
185210204
185210203
185210208
3 m
185210305
185210306
185210304
185210303
185210308
5 m
185210505
185210506
185210504
185210503
185210508
7 m
185210705
185210706
185210704
185210703
185210708
10 m
185211005
185211006
185211004
185211003
185211008
15 m
185211505
185211506
185211504
185211503
185211508
20 m
185212005
185212006
185212004
185212003
185212008
Other lengths, colors or halogen free cables on request
Patch Cords
Category 5e U/UTP 50 mirco inch Gold Plated on the Plug Connects 100% Performance Test WIRING: 568A TO 568A; 568B TO 568B; 568A TO 568B In compliance with TIA/EIA568A, EN50173, ISO/IEC11801 TIA/EIA Bulletin TSB67 For Wire Requirements TIA/EIA TSB40-A & TSB36
3P, ETLverified, UL/cUL listed Specification 26AWG, 7/0.16 mm U/UTP Category 5e Patch Cords Length
Grey
Green
Blue
Red
Yellow
0,5 m
185110055
185110056
185110054
185110053
185110058
1 m
185110105
185110106
185110104
185110103
185110108
2 m
185110205
185110206
185110204
185110203
185110208
3 m
185110305
185110306
185110304
185110303
185110308
5 m
185110505
185110506
185110504
185110503
185110508
7 m
185110705
185110706
185110704
185110703
185110708
10 m
185111005
185111006
185111004
185111003
185111008
15 m
185111505
185111506
185111504
185111503
185111508
20 m
185112005
185112006
185112004
185112003
185112008
Other lengths, colors or halogen free on request.
D4
T-Adapters
Premium Line „T“ adapters of printed circuit design provide high performance (meet cat. 3 transmission requirement) and flexibility in different wiring applications. „T” adapter converts an RJ45 8 position plug with 0.5ft round cable into two RJ45 8 position jacks at different wiring. Adapters are available as „Splitters“ which convert one 4-pair jack into two 2-pair jacks or one 4-pair jack into one 1-pair and 3-pair jack. Specifications Body: UL94-V0 ABS, White or Ivory Plug: RJ45 8P8C Jack: RJ45 8P8C Dimension: L 4.1 cm × W 4.7 cm × H 2.1 cm 193011211
193021210
T-Adapters PART NO.
DESCRIPTION
193011211
T-Adapter for splitting 4-pair Outlet to one 10Base-T and one Telephone Outlet, white
193011111
T-Adapter for splitting 4-pair Outlet to two 10Base-T Outlets, white
193012211
T-Adapter for splitting 4-pair Outlet to two Telephone Outlets, white
193021210
T-Adapter for splitting 4-pair Outlet to one 10Base-T and one Tel. Outlet, Shielded
193021110
T-Adapter for splitting 4-pair Outlet to two 10Base-T Outlets, Shielded
193022210
T-Adapter for splitting 4-pair Outlet to two Telephone Outlets, Shielded
Inline Couplers Our Category 5e in-line coupler is ideal to used to link an exit network cable run or to simply extend your patch cables. They are capable of handling LAN speeds of up to 1000Mbps. The coupler meet TIA/EIA 568A and ISO/IEC DIS 11801 Category 5e specification, and is Cat 5e & Power Sum certified. They are available in either shielded or unshielded to meet your requirements.
Features 1. Join two patch cords 2. Straight through 3. Extend Category 5e/6 Patch Cords without loosing Category 5e/6 performance 4. PCB design for maximum reliability 5. Keystone version available
191510001
D5
197510002
Inline Couplers PART NO.
DESCRIPTION
191510001 191520000 191610001 191620000 197510002
Cat.5e Unshielded In-line Coupler, Adapter Type, white Cat.5e Shielded In-line Coupler, Adapter Type Cat.6 Unshielded In-line Coupler, Adapter Type, white Cat.6 Shielded In-line Coupler, Adapter Type Cat.5e Unshielded Inline Coupler, Keystone Type, black
197610002
Cat.6 Unshielded Inline Coupler, Keystone Type, black
191620000
structured cabling system
Junction Boxes
You may have to couple two patch cords as one patch cord may be too short to connect the jack to the workstation. Junction Box offers punch down IDC termination types which provides a feed-through connection. The Junction Box provides an easy way to connect two patch cables.
Features 1. Join two category 5e/6 (or lower) cables 2. Dual Type IDC punch down terminals 3. Unshielded and Shielded box with cable tie 4. Double-stick tape or screw mounting included 5. Extend Category 5e/6 cable without loosing Category 5e/6 performance 6. PCB design for maximum reliability
192620000
Inline Couplers, Block Type (Junction Box) PART NO. DESCRIPTION 192510001 192520000 192610001 192620000
Cat.5e Unshielded In-line Coupler, Block Type (Junction Box), Dual Type IDC, white Cat.5e Shielded In-line Coupler, Block Type (Junction Box), Dual Type IDC Cat.6 Unshielded In-line Coupler, Block Type (Junction Box), Dual Type IDC, white Cat.6 Shielded In-line Coupler, Block Type (Junction Box), Dual Type IDC
Toolless RJ45 Toolless modular plug are the ideal solution of creating custom lengths of modular network cables. The modular plugs are manufactured from high-impact clear polycarbonate to withstand everyday wear and tear. You can expect error-free data transfers. Plug type: RJ45 Conducor: High performance copper alloy with 50 μ inch gold plating over nickel.
155100002
156100002
Toolless RJ45 Plug PART NO.
DESCRIPTION
155100002 156100002
Cat.5e Unshielded Tooless RJ 45 Plug, black Cat.6 Unshielded Tooless RJ 45 Plug, black
D6
Tools
Premium Line highest quality tools are efficient for more precise, consistent terminations and are automatically triggered with a simple push. The spring loaded mechanism triggers the blade providing just the right amount of impact to proper wire seat and/or cut. The tools are useful either for 110 or Krone termination. Some tools have changeable plate system. Each Premium Line tool is manufactured to comply with the highest European standards and quality requirements.
141213000
141312000
141312001
190000003
Tools and Blades
D7
PART NO.
DESCRIPTION
141213000
Impact Punch Down Tool use on 110 terminal block
141312000
Krone Type Impact Punch Down Tool
141312001
Professional Krone type Tool
190000003
Keystone Jack Support Tool for Termination, red
structured cabling system
Tools
These tools are suitable for plant maintenance, field service or LAN installation. All tools are full-cycle, compound leverage and triple ratchet. Their frame is made of the European high-grade, stamped hardened steel. Special design and ergonomics of the handles enables the installer easy and comfortable work.
142180000
142286000
143200000
142386410
Tools PART NO.
DESCRIPTION
142180000
Modular Plug Crimps, Strips and Cuts Tool use on 8P8C/RJ45 plug
142286000
Modular Tool For Cutting-Stripping & Crimping use on 6P & 8P Plug
142386410
Professional 3 in one Modular Crimping Tool with Ratchet release
143200000
Universal Stripping Tool
D8
Installation Cable
Installation Cable
structured cabling system
Installation Cable
A full-line production of Premium Line installation cable is based on a 10-year tradition and a powerful manufacturing ability. Extra large capacity and a team of experienced professionals make the products eminently competitive. New products development and new process improvement are two key approaches to maintain the company’s competitiveness.
Installation Cable Category 7 Plus S/FTP 1200 MHz
Installation Cable Category 7/Category6A S/FTP 600 MHz
Installation Cable Category 6A U/UTP 500 MHz
Installation Cable Category 6 U/UTP 250 MHz
Installation Cable Category 5e F/UTP
Installation Cable Category 5e U/UTP
Installation Cable Category 5e U/UTP Outdoor
Installation Cable U/UTP Powersum
E1
E2
E3
E4
E5
E6
E7
E8
Installation Cable
Category 7 Plus S/FTP 1200 MHz Configuration & Physical Characters Conductor
Material Size Construction Material Thickness Diameter Colors
Insulation
Elongation Tensile strength Aluminum-Mylar
Inner-Shield Braid
Material Construction Coverage Material Thickness
Sheath
Bare Copper 22 AWG 1/0.645 ± 0.02 mm Foam-Skin PE MIN at any point: 0.416 mm MAX AVG: 0.466 mm 1.576 ± 0.05 mm Blue/White Orange/White Green/White Brown/White MIN 150 % MIN 0.51 Kg/mm² An aluminum foil screen around each pair with insulation on inside surface Tinned Copper 16 Carriers / 5 Strands / 0.10 mm , 8 Picks / in MIN 40 % (Nom. 48 %) LSOH MIN at any point: 0.40 mm MIN AVG: 0.45 mm
Diameter Color Elongation Tensile strength Aging at 100 °C for 168Hrs
7.9 ± 0.3 mm Grey MIN 125 % MIN 0.917 Kg/mm² Min elongation retention: 75 % Min tensile strength retention: 70 %
Freq
Attenuation
NEXT
PS NEXT
ACR
PSACR
ACR-F
PSACR-F
Return Loss
Propagation Delay
(MHz)
(dB)
(dB)
(dB)
(dB)
(dB)
(dB)
(dB)
(dB)
(ns)
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
1
1.9
1.6
78
105
75
102
76.1
103
73.1
100
77
96
75
94
20
31
536
512
4
3.5
3.0
78
105
75
102
74.6
102
71.6
99
77
96
75
94
23
34
518
494
10
5.4
4.9
78
105
75
102
72.6
100
69.6
97
74
96
71
94
25
35
511
487
16
6.8
6.3
78
105
75
102
71.2
99
68.2
96
70
96
67
97
25
35
509
485
20
7.6
7.0
78
105
75
102
70.3
98
67.4
95
68
96
65
94
25
35
508
484
31.25
9.6
8.9
78
105
75
102
68.5
96
65.5
93
64
93
61
91
23.6
34
506
482
62.5
13.7
12.8
78
105
75
102
64.3
92
61.3
89
58
88
55
86
21.5
32
505
481
100
17.5
16.5
76
105
73
102
58.5
89
55.5
86
54
82
51
80
20.1
31
504
480
200
25.3
23.5
71
102
68
100
46.2
79
43.2
77
48
78
45
75
18
29
503
479
250
28.5
28.2
70
102
67
100
41.5
74
38.5
72
46
75
43
70
17.3
28
502
502
300
31.5
28.9
69
102
66
97
37.3
73
34.3
68
44
70
41
68
17.3
28
502
478
350
34.3
31.5
68
100
65
97
33.6
69
30.6
66
43
70
40
63
17.3
28
502
478
400
36.9
33.1
67
95
64
93
30.1
62
27.1
60
42
66
39
59
17.3
28
502
478
550
44.1
40.2
65
95
62
93
20.8
55
17.8
53
39
60
36
56
17.3
28
502
478
600
46.3
41.7
64
95
61
93
18
53
15
51
38
55
35
53
17.3
28
502
478
800
54.5
47.6
62
90
59
87
7.9
42
4.9
39
36
47
33
44
16.1
28
501
477
1000
62
54.5
61
85
58
83
--
31
--
29
34
40
31
38
15.1
27
501
477
1200
69
59.8
60
80
57
77
--
20
--
17
32
35
29
33
14.3
27
501
477
S/FTP Category 7 Plus Installation cable
E1
PART NO.
DESCRIPTION
208442225
Category 7 Plus S/FTP Installation Cable, 500m reel, LSOH, 1200 MHz
208442325
Category 7 Plus S/FTP Installation Cable, 1000m reel, LSOH, 1200 MHz
structured cabling system
Installation Cable
Category 7/Category 6A S/FTP 600 MHz Configuration & Physical Characters Conductor
Material Size Construction Material Thickness Diameter Colors
Insulation
Inner-Shield Braid
Elongation Tensile strength Aluminum-Mylar Material Construction Coverage Material Thickness
Sheath
Diameter Color Elongation Tensile strength Aging at 100 °C for 168Hrs
Freq
Attenuation
(MHz)
NEXT
(dB)
PS NEXT
(dB)
ACR
(dB)
PSACR
(dB)
ACR-F
(dB)
Bare Copper 23 AWG 1/0.583 ± 0.02 mm Foam-Skin PE MIN at any point: 0.369 mm MAX AVG: 0.419 mm 1.42 ± 0.05 mm Blue/White Orange/White Green/White Brown/White MIN 150 % MIN 0.51 Kg/mm² An aluminum foil screen around each pair with insulation on inside surface Tinned Copper 16 Carriers / 5 Strands / 0.10 mm , 8 Picks / in MIN 40 % (Nom. 48 %) LSOH MIN at any point: 0.40 mm MIN AVG: 0.45 mm 7.4 ± 0.3 mm Grey MIN 125 % MIN 0.917 Kg/mm² Min elongation retention: 75 % Min tensile strength retention: 70 %
PSACR-F
(dB)
Return Loss
(dB)
Propagation Delay
(dB)
(ns)
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
1
2.1
1.7
78
100
75
97
75.9
98.3
72.9
95.3
78
90
75
87
20
30
512
492
4
3.7
3.4
78
100
75
97
74.3
96.6
71.3
93.6
78
90
75
87
23
33
494
474
10
5.8
5
78
100
75
97
72.2
95
69.2
92
74
90
71
87
25
35
487
467
16
7.3
6.4
78
100
75
97
70.7
93.6
67.7
90.6
69.9
90
66.9
87
25
35
485
465
20
8.2
7.1
78
100
75
97
69.8
92.9
66.8
89.9
68
90
65
87
25
35
484
464
31.25
10.3
9
78
100
75
97
67.7
91
64.7
88
64.1
90
61.1
87
23.6
33.6
482
462
62.5
14.6
13
75.5
100
72.5
97
60.9
87
57.9
84
58.1
85
55.1
82
21.5
31.5
481
461
100
18.5
16.8
72.4
98
69.4
95
53.9
81.2
50.9
78.2
54
81
51
78
20.1
30.1
480
460
200
26.5
23.9
67.9
93
64.9
90
41.4
69.1
38.4
66.1
48
77
45
74
18
28
479
459
250
29.7
28.5
66.4
92.1
63.4
89.1
36.7
63.6
33.7
60.6
46
76
43
73
17.3
27.3
478
458
300
32.7
29.2
65.2
91
62.2
88
32.6
61.8
29.6
58.8
44.5
71
41.5
68
17.3
27.3
478
458
350
35.4
31.8
64.2
90.3
61.2
87.3
28.8
58.5
25.8
55.5
43.1
69
40.1
66
17.3
27.3
478
458
400
38
33.4
63.4
89.1
60.4
86.1
25.4
55.7
22.4
52.7
42
68.1
39
65.1
17.3
27.3
478
458
550
45
37.2
61.3
87.3
58.3
84.3
16.3
50.1
13.3
47.1
39.2
66.2
36.2
63.1
17.3
27.3
478
458
600
47.1
42.5
60.7
86.1
57.7
83.1
13.6
43.6
10.6
40.6
38.4
60
35.4
57
17.3
27.3
477
458
S/FTP Category 7/Category 6A Installation cable PART NO.
DESCRIPTION
207442225
Category 7/Category 6A S/FTP Installation Cable, 500m reel, LSOH,600 MHz
207442325
Category 7/Category 6A S/FTP Installation Cable, 1000m reel, LSOH, 600 MHz
E2
Installation Cable
Category 6A U/UTP 500 MHz
Configuration & Physical Characters Conductor
Insulation
Material
Bare Copper
Size
23 AWG
Construction
1/0.56 ± 0.02 mm
Material
HDPE
Thickness
MIN at any point: 0.12 mm MAX AVG: 0.22 mm
Diameter
1.0 ± 0.08 mm
Colors
Blue/White Orange/White Green/White Brown/White
Elongation Sheath
MIN 300 %
Tensile strength
MIN 1.682 Kg/mm²
Material
PVC
LSOH
Thickness
MIN at any point: 0.6 mm
MIN at any point: 0.6 mm
MIN AVG: 0.65 mm
MIN AVG: 0.65 mm
Diameter
7.5 ± 0.3 mm
7.5 ± 0.3 mm
Color
Grey
Elongation
MIN 100 %
MIN 125 %
Grey
Tensile strength
MIN 1.407 Kg/mm²
MIN 0.917 Kg/mm²
Aging at 100 °C for 168 Hrs
Min elongation retention: 50 %
Min elongation retention: 75 %
Mintensilestrengthretention:75 %
Mintensilestrengthretention:70 %
Freq
Attenuation
NEXT
PS NEXT
ACR
PSACR
ACR-F
PSACR-F
Return Loss
(MHz)
(dB)
(dB/100m)
(dB)
(dB)
(dB)
(dB)
(dB)
(dB)
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
1
2.1
1.7
74.3
102
72.3
100.8
72.2
100.3
70.2
99.1
67.8
99.8
64.8
91.5
20
26.5
4
3.8
3.3
65.3
95
63.3
94.2
61.5
91.7
59.5
90.9
55.7
94.9
52.7
80.7
23
36
10
5.9
5.3
59.3
93
57.3
92.9
53.4
87.7
51.4
87.6
47.8
87.8
44.8
72.6
25
43
16
7.5
6.8
56.2
90
54.2
90.5
48.8
83.2
46.8
83.7
43.7
79.8
40.7
68.4
25
49
20
8.4
7.6
54.8
87
52.8
87.1
46.4
79.4
44.4
79.5
41.7
76.9
38.7
66.4
25
52
31.25
10.5
9.5
51.9
84
49.9
84.5
41.4
74.5
39.4
75
37.9
73.1
34.9
62.9
23.6
48
62.5
15
13.7
47.4
82
45.4
82.3
32.4
68.3
30.4
68.6
31.8
68.3
28.8
56.3
21.5
48
100
19.1
17.5
44.3
77
42.3
77.9
25.2
59.5
23.2
60.4
27.8
63.1
24.8
51.8
20.1
45
200
27.6
25.1
39.8
74
37.8
74.2
12.2
48.9
10.2
49.1
21.7
50.3
18.7
46.9
18
43
250
31.1
28.1
38.3
72
36.3
72.3
7.3
43.9
5.3
44.2
19.8
50.7
16.8
44.2
17.3
37
300
34.3
30.9
37.1
70
35.1
69.3
2.9
39.1
0.9
38.4
18.2
49.2
15.2
42.1
16.8
34
400
40.1
36.1
35.3
68
33.3
68.1
--
31.9
--
30
15.7
44.2
12.7
41.3
15.9
34
500
45.3
40.5
33.8
66
31.8
65.9
--
25.5
--
25.4
13.8
41.3
10.8
39.5
15.2
34
U/UTP Category 6A Installation cable
E3
PART NO.
DESCRIPTION
209141225
Category 6A U/UTP Installation Cable, 500 m reels, PVC, 500 MHz
209142225
Category 6A U/UTP Installation Cable, 500 m reels, LSOH, 500 MHz
structured cabling system
Installation Cable
Category 6 U/UTP 250 MHz
Construction Conductor
bare copper wire Ø 0.56 mm (AWG23)
Insulation
HDPE, Ø 1.0 mm
Twisting
2 cores to the pair
Sheath
non metallic cross separator PVC, or LSOH
Diameter
6.3 ± 0.3 mm
Mechanical Properties ≥ 20 mm without load Bending radius
≥ 40 mm with load
Operation Temperature
-20 °C up to + 60 °C
during installation
0 °C up to + 50 °C
Freq
Attenuation
(MHz)
(dB)
NEXT
PS NEXT
(dB/100m)
ACR
(dB)
PSACR
(dB)
ACR-F
(dB)
PSACR-F
(dB)
Return Loss
(dB)
(dB)
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
1
2.1
1.8
74.3
82.3
72.3
77.3
72.2
80.5
70.2
75.5
67.8
84.8
64.8
79.8
20
29
4
3.8
3.5
65.3
73.3
63.3
68.3
61.4
69.8
59.4
64.8
55.8
72.8
52.8
67.8
23
32
10
6
5.6
59.3
67.3
57.3
62.3
53.3
61.7
51.3
56.7
47.8
64.8
44.8
59.8
25
38
16
7.6
7.1
56.2
64.2
54.2
59.2
48.6
57.1
46.6
52.1
43.7
60.7
40.7
55.7
25
34
20
8.5
7.9
54.8
62.8
52.8
57.8
46.2
54.9
44.2
49.9
41.8
58.8
38.8
53.8
25
34
31.25
10.8
10
51.9
59.9
49.9
54.9
41.1
49.9
39.1
44.9
37.9
54.9
34.9
49.9
23.6
32
62.5
15.5
14.4
47.4
55.4
45.4
50.4
31.9
41
29.9
36
31.9
48.9
28.9
43.9
21.5
32
100
19.9
18.6
44.3
52.3
42.3
47.3
24.4
33.7
22.4
28.7
27.8
44.8
24.8
39.8
20.1
32
160
25.9
24.1
41.2
49.2
39.2
44.2
15.5
25.1
13.5
20.1
23.7
40.7
20
35.7
18.7
31
200
29
26.8
39.8
47.8
37.8
42.8
10.6
21
8.6
15.2
21.8
38.8
18.8
33.8
18
29
250
33
30.5
38.3
46.3
36.3
40.3
5.3
15.8
3.3
10.8
19.8
37
16.8
31.8
17.3
29
U/UTP Category 6 Installation cable PART NO.
DESCRIPTION
206142115
Category 6 U/UTP Installation Cable, 305 m boxes, LSOH
206141115
Category 6 U/UTP Installation Cable, 305 m boxes, PVC
E4
Installation Cable Category 5e F/UTP
Construction Conductor
bare copper wire Ø 0.517 mm (AWG24)
Insulation
Foam-Skin PE, Ø 1.0 mm
Twisting
2 cores to the pair
Overall screen
Al-laminated plastic foil, Drain Wire(AWG26)
Sheath
PVC or LSOH
Diameter
6.0 ± 0.3 mm
Mechanical Properties ≥ 25 mm without load
Bending radius
≥ 50 mm with load Operation Temperature
-20 °C up to + 60 °C
during installation
0 °C up to + 50 °C
Freq
Attenuation
NEXT
PS NEXT
ACR
PSACR
ACR-F
PSACR-F
Return Loss
(MHz)
(dB)
(dB/100m)
(dB)
(dB)
(dB)
(dB)
(dB)
(dB)
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
1
2
1.8
65.3
79.3
62.3
72.2
63.3
77.5
60.3
77.5
63.8
84.8
60.8
78.8
20
27
4
4.1
3.7
56.3
70.3
53.3
63.3
52.2
66.6
49.2
59.6
51.7
72.8
48.7
68.8
23
32
10
6.5
5.8
50.3
64.3
47.3
57.3
43.8
58.5
40.8
51.5
43.8
64.8
40.8
58.6
25
32
16
8.2
7.4
47.3
61.1
44.3
54.2
39.1
53.7
36.1
46.8
39.7
60.7
36.7
54.5
25
32
20
9.3
8.3
45.8
59.3
42.8
52.6
36.5
51
33.5
44.6
37.7
58.8
34.7
52.6
25
32
31.25
11.7
10.5
42.9
56.7
39.9
49.6
31.2
46.2
28.2
39.1
33.9
54.9
30.9
48.7
23.6
30
62.5
17
15.1
38.4
52.1
35.4
45.2
21.4
37
18.4
30.1
27.8
48.9
24.8
42.7
21.5
30
100
22
19.3
35.3
49.2
32.3
42.1
13.3
29.9
10.3
22.8
23.8
44.8
20.8
38.6
20.1
30
F/UTP Category 5e Installation cable
E5
PART NO.
DESCRIPTION
205241115
Category 5e F/UTP Installation Cable, 305 m box, PVC
205241225
Category 5e F/UTP Installation Cable, 500 m reels, PVC
205242115
Category 5e F/UTP Installation Cable, 305 m box, LSOH
205242225
Category 5e F/UTP Installation Cable, 500 m reels, LSOH
structured cabling system
Installation Cable Category 5e U/UTP
Construction Conductor
bare copper wire Ø 0.508 mm (AWG24)
Insulation
HDPE, Ø 0.91 mm
Twisting
2 cores to the pair
Sheath
PVC or LSOH
Diameter
5.2 ± 0.2mm
Mechanical Properties ≥ 20 mm without load Bending radius
≥ 40 mm with load
Operation Temperature
-20 °C up to + 60 °C
during installation
0 °C up to + 50 °C
Freq
Attenuation
(MHz)
(dB)
NEXT
PS NEXT
(dB/100m)
ACR
(dB)
PSACR
(dB)
ACR-F
(dB)
PSACR-F
(dB)
Return Loss
(dB)
(dB)
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
1
2
1.8
65.3
77.7
62.3
75.2
63.3
75.9
60.3
73.3
63.8
69.2
60.8
68.5
20
40.1
4
4.1
3.7
56.3
68.7
53.3
66
52.2
61.9
49.2
62.2
51.7
57.5
48.7
57
23
40.1
10
6.5
6
50.3
60.7
47.3
58.3
43.8
54.5
40.8
52.2
43.8
49
40.8
48.2
25
37.3
16
8.2
7.7
47.3
56.1
44.3
53.7
39.1
48.3
36.1
46
39.7
45.6
36.7
43.8
25
36.7
20
9.3
8.6
45.8
55.3
42.8
52.9
36.5
46.5
33.5
44.2
37.7
43.6
34.7
42.8
25
36
31.25
11.7
10.8
42.9
52.7
39.9
50
31.2
41.6
28.2
39
33.9
40.1
30.9
39.3
23.6
32.6
62.5
17
15.5
38.4
48
35.4
45.5
21.4
32.2
18.4
29.9
27.8
34.7
24.8
33.5
21.5
31.6
100
22
19.8
35.3
44.5
32.3
42.2
13.3
24.2
10.3
22.1
23.8
30.4
20.8
29.4
20.1
31.7
U/UTP Category 5e Installation cable PART NO.
DESCRIPTION
205141115
Category 5e U/UTP Installation Cable, 305 m boxes, PVC
205142115
Category 5e U/UTP Installation Cable, 305 m boxes, LSOH
E6
Installation Cable
Category 5e U/UTP Outdoor
Configuration & Physical Characters Conductor Material Bare Copper Size 24 AWG Construction 1/0.517 ± 0.02 mm Insulation Material HDPE MIN at any point: 0.137 mm Thickness MAX AVG: 0.197 mm Diameter 0.91 ± 0.06 mm Colors Blue/White-Blue Orange/White-Orange Green/White-Green Brown/White-Brown Elongation MIN 300 % Tensile strength MIN 1.682 Kg/mm² Sheath Material PE Thickness MIN at any point: 0.45 mm MIN AVG: 0.50 mm Diameter 5.5 ± 0.3 mm Color Black Elongation MIN 500 % GEL NUFLEX RE-4088
Freq
Attenuation
(MHz)
(dB)
NEXT
PS NEXT
(dB/100m)
ACR
(dB)
PSACR
(dB)
ACR-F
(dB)
PSACR-F
(dB)
(dB)
(dB)
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
Nor.
Typ.
1
2
1.8
65.3
77.7
62.3
75.2
63.3
75.9
60.3
73.3
63.8
69.2
60.8
68.5
20
40.1
4
4.1
3.7
56.3
68.7
53.3
66
52.2
61.9
49.2
62.2
51.7
57.5
48.7
57
23
40.1
10
6.5
6
50.3
60.7
47.3
58.3
43.8
54.5
40.8
52.2
43.8
49
40.8
48.2
25
37.3
16
8.2
7.7
47.3
56.1
44.3
53.7
39.1
48.3
36.1
46
39.7
45.6
36.7
43.8
25
36.7
20
9.3
8.6
45.8
55.3
42.8
52.9
36.5
46.5
33.5
44.2
37.7
43.6
34.7
42.8
25
36
31.25
11.7
10.8
42.9
52.7
39.9
50
31.2
41.6
28.2
39
33.9
40.1
30.9
39.3
23.6
32.6
62.5
17
15.5
38.4
48
35.4
45.5
21.4
32.2
18.4
29.9
27.8
34.7
24.8
33.5
21.5
31.6
100
22
19.8
35.3
44.5
32.3
42.2
13.3
24.2
10.3
22.1
23.8
30.4
20.8
29.4
20.1
31.7
U/UTP Category 5e Outdoor Installation cable
E7
Return Loss
PART NO.
DESCRIPTION
205143112
Category 5e U/UTP Outdoor Installation Cable, 305 m boxes, Gel filled, PE jacket, black
structured cabling system
Installation Cable U/UTP Powersum
Complying with all proposed Category 5 requirements as per ANSI/TIA/EIA, ISO/IEC, and CENELEC EN Standards • 2nd Edition ISO/IEC 11801 CAT5 • 2nd Edition EN 50173 CAT5 • ANSI TIA/EIA 568-1-5 CAT5 • CENELEC EN 50288-2 (for screened cable) CAT5 • CENELEC EN 50288-3 (for unscreened cable) CAT5
Applications • Voice, T1, ISDN, 10 BASE-T (IEEE 802.30) • 100 BASE-T (IEEE 802.3) Fast Ethernet, 100 VG-any LAN (IEEE 802.12)
Specifications LF D.C. Loop Resistance D.C. Resistance, Unbalanced Insulation Resistance Mutual Capacitance Capacitance, Unbalanced HF Velocity of Propagation Propagation Delay Delay Skew Mean Impedance Characteristic Impedance Structure Conductor Insulation Outer Sheath
Max. 19 Ohm/100 m Max. 5 % Min. 50 Mohm/100 m; 500 vdc/60 s Max. 5 600 pf/100 m Max. 330 pf/100 m @ 20 ° Min. 0.66C Max. 5 350 ns/km @ 1~100 MHz Max. 400 ns/km @ 100 MHz 100 Ohm +/- 10 Ohm @ 10~100MHz 100 Ohm +/- 15 Ohm @ 1~100MHz 24AWG Solid Copper High Density Polyethylene PVC, LSOH
U/UTP Category 3, 5, 5e Powersum Installation Cable PART NO.
DESCRIPTION
203181225
Category 3 U/UTP Installation Cable, 25 pairs, 500 m reels, PVC
203191225
Category 3 U/UTP Installation Cable, 50 pairs, 500 m reels, PVC
201181225
Category 5 U/UTP Installation Cable, 25 pairs, 500 m reels, PVC
201191225
Category 5 U/UTP Installation Cable, 50 pairs, 500 m reels, PVC
205181225
Category 5e U/UTP Installation Cable, 25 pairs, 500 m reels, PVC
E8
Fiber Optic
Patch Cords Adapters Patch Panels Bulk Cable Fusion Splicer
structured cabling system
Fiber Optic
Premium Line can offer a complete Fiber Optic solution according to the customers’ needs. Patch cords are produced in both single- and multimode, vide variety of lengths and connectors. Only high quality fibers are used at the production and all patch cords are 100% inspected before shipping. The performance of the Premium Line fiber optic connectors fully complies with the Bellcore GR-00326 issue.
Fiber Optic Patch Cords
Fiber Optic Patch Cords
Fiber Optic Adapters and Connectors
Fiber Optic Patch Panels, Wall Mount Box
Fiber Optic Indoor Cable FTTH Drop Cable, Flat Type & Zip-Cord Cable
Fiber Optic Indoor Cable Distribution Tight Buffer with Aramid Yarn Strength Member Cable
Fiber Optic Outdoor Cable Unitube with Glass Yarn Strength Member Cable
Fiber Optic Outdoor Cable Steel Armored Unitube with Glass Yarn Strength Member Cable
Fiber Optic Outdoor Cable Non-metallic Multitube with FRP Strength Member Cable
Fiber Optic Fusion Splicer
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
Fiber Optic Patch Cords
Fiber optic patch cords are suited for equipment jumper cable, cross connects, and work area connections. All patch cords are manufactured using OFNR riser grade cable and are 100% factory tested to ensure performance to TIA/EIA-568-B-2, ISO 11801:2002 and EN 50173-1 standards. ST/ST, SC/SC and hybrid ST/SC Patch Cords are available in both multimode (62.5/125μm and 50/125μm) and singlemode cable-types, in duplex and simplex versions.
ST Fiber Optic Patch Cords PART NO.
DESCRIPTION
211522L
ST-ST Duplex Multimode Patch Cord, 62.5/125
211622L
ST-ST Duplex Multimode Patch Cord, 62.5/125 Halogen Free
212522L
ST-ST Duplex Multimode Patch Cord, 50/125
212622L
ST-ST Duplex Multimode Patch Cord, 50/125 Halogen Free
ST-SC Fiber Optic Patch Cords PART NO.
DESCRIPTION
211521L
ST-SC Duplex Multimode Patch Cord, 62.5/125
211621L
ST-SC Duplex Multimode Patch Cord, 62.5/125 Halogen Free
212521L
ST-SC Duplex Multimode Patch Cord, 50/125
212621L
ST-SC Duplex Multimode Patch Cord, 50/125 Halogen Free
SC Fiber Optic Patch Cords PART NO.
DESCRIPTION
211511L
SC-SC Duplex Multimode Patch Cord, 62.5/125
211611L
SC-SC Duplex Multimode Patch Cord, 62.5/125 Halogen Free
212511L
SC-SC Duplex Multimode Patch Cord, 50/125
212611L
SC-SC Duplex Multimode Patch Cord, 50/125 Halogen Free
For length substitute L in PN: 010 = 1 m 020 = 2 m 030 = 3 m Other lengths, simplex, OM3 OM4 upon request.
F1
050 = 5 m
070 = 7 m
100 = 10 m
structured cabling system
Fiber Optic Patch Cords
Premium Line MT-RJ and LC fiber optic patch cords are suited for equipment jumper cable, cross connects, and work area connections. All patch cords are manufactured using OFNR riser grade cable and are 100% factory tested to ensure performance to TIA/EIA-568-B-3, ISO 11801:2002 and EN 50173-1 standards. MT-RJ/MT-RJ, LC/LC and hybrid MT-RJ and LC to ST and SC multimode (62,5/125μm and 50/125μm) patch cords are available.
LC Fiber Optic Patch Cords PART NO.
DESCRIPTION
211J44L
LC-LC Duplex Multimode Patch Cord, 62.5/125
212J44L
LC-LC Duplex Multimode Patch Cord, 50/125
211J42L
LC-ST Duplex Multimode Patch Cord, 62.5/125
212J42L
LC-ST Duplex Multimode Patch Cord, 50/125
211J41L
LC-SC Duplex Multimode Patch Cord, 62.5/125
212J41L
LC-SC Duplex Multimode Patch Cord, 50/125
MT-RJ Fiber Optic Patch Cords PART NO.
DESCRIPTION
211J55L
MT-RJ - MT-RJ Duplex Multimode Patch Cord, 62.5/125
212J55L
MT-RJ - MT-RJ Duplex Multimode Patch Cord, 50/125
211J52L
MT-RJ - ST Duplex Multimode Patch Cord, 62.5/125
212J52L
MT-RJ - ST Duplex Multimode Patch Cord, 50/125
211J51L
MT-RJ - SC Duplex Multimode Patch Cord, 62.5/125
212J51L
MT-RJ - SC Duplex Multimode Patch Cord, 50/125
FC Fiber Optic Patch Cords PART NO.
DESCRIPTION
211J33L
FC - FC Duplex Multimode Patch Cord, 62.5/125
212J33L
FC - FC Duplex Multimode Patch Cord, 50/125
211J35L
FC -MT-RJ Duplex Multimode Patch Cord, 62.5/125
212J35L
FC -MT-RJ Duplex Multimode Patch Cord, 50/125
211J32L
FC - ST Duplex Multimode Patch Cord, 62.5/125
212J32L
FC - ST Duplex Multimode Patch Cord, 50/125
211J31L
FC - SC Duplex Multimode Patch Cord, 62.5/125
212J31L
FC - SC Duplex Multimode Patch Cord, 50/125
For length substitute L in PN: 010 = 1 m 020 = 2 m 030 = 3 m For jacket material substitute J in PN: 5 = PVC 6 = LSOH Other lengths, simplex, OM3 OM4 upon request.
050 = 5 m
070 = 7 m
100 = 10 m
F2
Fiber Optic
Adapters and Connectors Premium Line Fiber optic connectors are offered in wide range of types. All standard shapes are offered in both multimode and singlemode construction. Available is a wide variety of fiber optic adapters including ST, SC, LC and MT-RJ. Our ST and SC adapters are produced with a phosphor bronze sleeve for universal applications (MM/SM). All SC, LC and MT-RJ adapters are provided with retaining clips for easy, snap-in mounting.
Fiber Optic Pigtails PART NO. DESCRIPTION
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
222121L 222111L 222141L 222221L 222211L 222241L
221121L 221111L 221141L 221221L 221211L 221241L
Pigtail ST 62,5/125, 900 µm Pigtail SC 62,5/125, 900 µm Pigtail LC 62,5/125, 900 µm Pigtail ST 62,5/125, 3 mm Pigtail SC 62,5/125, 3 mm Pigtail LC 62,5/125, 3 mm
223121L 223111L 223141L 223221L 223211L 223241L
Pigtail ST 9/125, 900 µm Pigtail SC 9/125, 900 µm Pigtail LC 9/125, 900 µm Pigtail ST 9/125, 3 mm Pigtail SC 9/125, 3 mm Pigtail LC 9/125, 3 mm
Pigtail ST 50/125, 900 µm Pigtail SC 50/125, 900 µm Pigtail LC 50/125, 900 µm Pigtail ST 50/125, 3 mm Pigtail SC 50/125, 3 mm Pigtail LC 50/125, 3 mm
For length substitute L in PN: 010 - 1 m 020 - 2 m Other lengths, duplex, connectors available on request
ST Fiber Connectors and Adapters PART NO. DESCRIPTION 232120200 ST MM Connector, crimping, 3.0 mm 232220200 ST SM Connector, crimping, 3.0 mm 231122200 ST MM Adapter w/Phosphor Bronze Sleeve 231221200 ST SM Adapter w/Zirconia Sleeve Singlemode Adapter available on request.
SC Fiber Connectors and Adapters PART NO. DESCRIPTION SC MM Connector, crimping, 3.0 mm, Simplex 232120108 SC SM Connector, crimping, 3.0 mm, Simplex 232220104 231112108 SC Duplex MM Adapter, Phosphor Bronze Sleeve, Beige 231211104 SC Duplex SM Adapter, Zirconia Ceramic Sleeve, Blue SM and Simplex Adapters available on request.
LC Fiber Connectors and Adapters PART NO. DESCRIPTION 232120408 232220404 231112408 231211404 SM available on request.
LC MM Connector, crimping, 3.0 mm, Simplex LC SM Connector, crimping, 3.0 mm, Simplex LC Duplex MM Adapter w/Phosphor Bronze Sleeve, Beige LC Duplex SM Adapter, Zirconia Sleeve Blue
MT-RJ Fiber Connectors and Adapters PART NO. DESCRIPTION 232120500 232220500 231300500
F3
MTRJ MM Connector, crimping, 3.0 mm MTRJ SM Connector, crimping, 3.0 mm MT-RJ Adapter, phosphor
structured cabling system
Fiber Optic Patch Panels
Premium Line 19” Rack mountable fiber optic patch panel is designed for direct fiber optic cables termination. The patch panel is modular and contains two parts – body and faceplate for several adapter types and number. Panel has fully metal massive construction for usage on critical environments and can be easily pulled out with no need to be dismanteled from the rack. Rear section accommodates cable entry and cable holder that protects cables against damage.
Fiber Optic Patch Panels PART NO.
DESCRIPTION
241100002 Fiber optic patch panel main body, black 242301082 8port SC front panel for fiber optic patch panel, simplex, black 242302082 8port ST front panel for fiber optic patch panel, black 242403082 8port LC faceplate for fiber optic patch panel, duplex, black 242500002 Blank panel for fiber optic patch panel, black 243000005 Splice cassette, for 12-port, grey 4 port, 6 port and duplex front panel on request
Fiber Optic
Wall Mount Box Premium Line Wall Mount Fiber Optic Box is used for the direct termination of fibers. The rear section accommodates cable entry and protects against taking out the cables. Box includes two separate sections for fusion splice trays and for routing optical connecting modules to the equipment. The Premium Line four-rack space fiber optic enclosure contains all of the features of the two-rack space model, but with additional capacity to manage fiber counts up to 144. Cable entry/exit feature utilizes a flexible grommet seal, which is cut at time of installation to accommodate the desired cable diameters for entry and exit points. These grommets provide a dust & debris barrier during and after installation.
Fiber Optic Wall Mount Box PART NO.
DESCRIPTION
251011240 251012240 251011480 251012480
24 port SC wall mount fiber optic box without adapters 24 port ST wall mount fiber optic box without adapters 48 port SC wall mount fiber optic box without adapters 48 port ST wall mount fiber optic box without adapters
F4
Fiber Optic Indoor Cable FTTH Drop Cable, Flat Type, LSOH
FRP Strength Member Optical Fiber(s)
Jacket
Mechanical Characteristics Outside
Cable
Diameter
Weight
Short Term
Long Term
Short Term
Long Term
Dynamic
Static
(mm)
(Kg/Km)
(N)
(N)
(N)
(N)
(N)
(N)
1
3.1×2.0
9.6
100
50
2000
700
30
15
2
3.1×2.0
9.8
100
50
2000
700
30
15
4
3.1×2.0
10.0
100
50
2000
700
30
15
Fiber Count
Tensile Load
Crush Load
Bend Radius
F TTH Drop Cable, Flat Type, LSOH Number of fibers
9/125
50/125
62,5/125
50/125(OM3)
1
261422001
261432001
261412001
261442001
2
261422002
261432002
261412002
261442002
4
261422004
261432004
261412004
261442004
Zip–cord
Optical Fiber Coating Buffer Non-metallic Strength Member Jacket
Mechanical Characteristics Outside
Cable
Diameter
Weight
Short Term
Long Term
Short Term
Long Term
Dynamic
Static
(mm)
(Kg/Km)
(N)
(N)
(N)
(N)
(N)
(N)
2
3.0×6.1
13.5
220
140
500
100
100
30
2
2.0×4.1
6.3
120
80
500
100
100
30
Fiber Count
Tensile Load
Crush Load
Bend Radius
Zip-cord
F5
Number of fibers
9/125
50/125
62,5/125
50/125(OM3)
2
261522018
261532018
261512018
261542018
2
261522020
261532020
261512020
261542020
structured cabling system
Fiber Optic Indoor Cable
Distribution Tight Buffer with Aramid Yarn Strength Member
Environmental Characteristics Item
Characteristics
Operating Temperature
-50 °C~+70 °C
Storage Temperature
-20 °C~+60 °C
Riser UL/cUL Rated
Type OFNR / OFN FT4
Jacket Material
PVC or LSOH
Mechanical Characteristics Outside
Tight Buffer
Cable
Diameter
Diameter
Weight
Short Term
Long Term
Short Term
Long Term
Dynamic
Static
(mm)
(mm)
(Kg/Km)
(N)
(N)
(N)
(N)
(N)
(N)
2
3.2
0.9
10.0
660
200
1000
300
20×D
10×D
4
4.8
0.9
18.0
660
200
1000
300
20×D
10×D
6
5.1
0.9
22.5
660
200
1000
300
20×D
10×D
8
5.6
0.9
28.0
660
200
1000
300
20×D
10×D
12
6.2
0.9
38.0
660
200
1000
300
20×D
10×D
24
8.2
0.9
63.0
1320
400
1000
300
20×D
10×D
Fiber Count
Tensile Load
Crush Load
Bend Radius
*D: Cable Diameter Compliant Standard: ITU-T G651/ITU-T G652A, ICEA-569, ANSI/TIA 568B.3, IEC 794, IEC-60332-1, IEC-60332-3C
Distribution Tight Buffer with Aramid Yarn Strength Member LSOH Number of fibers
9/125
50/125
62,5/125
50/125(OM3)
4
261322004
261332004
261312004
261342004
6
261322006
261332006
261312006
261342006
8
261322008
261332008
261312008
261342008
12
261322012
261332012
261312012
261342012
24
261322024
261332024
261312024
261342024
*PVC or Plenum jacket on request
F6
Fiber Optic Outdoor Cable Unitube with Glass Yarn Strength Member
Structure & Environmental Characteristics Optical Fiber
Loose Tube
Material
PBT
Peripheral Strength Member
Material
Glass yarn
Wrapping
Material
Filling Compound
Sheath
Material/Color
PE/black
Operating Temperature
-40 °C~+70 °C
Storage / transport Temperature
-40 °C~+70 °C
Installation Temperature
-20 °C~+50 °C
Tube Filling Compound Loose Tube
Glass Yarn PE Jacket
Mechanical Characteristics Outside
Loose Tube
Cable
Diameter
Diameter
Weight
Short Term
Long Term
Short Term
Long Term
Dynamic
Static
(mm)
(mm)
(Kg/Km)
(N)
(N)
(N)
(N)
(N)
(N)
4
8.2 ± 0.5
3.0
73
1000
600
1000
300
10×D
20×D
6
8.2 ± 0.5
3.0
73
1000
600
1000
300
10×D
20×D
8
8.2 ± 0.5
3.0
73
1000
600
1000
300
10×D
20×D
12
8.2 ± 0.5
3.0
73
1000
600
1000
300
10×D
20×D
24
8.2 ± 0.5
4.0
75
1000
600
1000
300
10×D
20×D
Fiber Count
Tensile Load
Crush Load
Bend Radius
*D: Cable Diameter Compliant Standard: ITU-T G651/ITU-T G652D, ANSI/TIA B.3, IEC 794
Unitube with Glass Yarn Strength Member
F7
Number of fibers
9/125
50/125
62.5/125
50/125(OM3)
4
263123004
263133004
263113004
263143004
6
263123006
263133006
263113006
263143006
8
263123008
263133008
263113008
263143008
12
263123012
263133012
263113012
263143012
24
263123024
263133024
263113024
263143024
structured cabling system
Fiber Optic Outdoor Cable Steel Armored Unitube with Glass Yarn Strength Member
Structure & Environmental Characteristics Loose tube
Material
PBT
Peripheral Strength Member
Material
Glass Yam
Wrapping
Material
Filling Compound
Moisture Barrier
Material
Corrugated Steel Tape
Sheath
Material/Color
PE/black
Optical Fiber Tube Filling Compound Central Tube
Operating Temperature
-40 °C~+70 °C
Glass Yarn
Storage / Transport Temperature
-40 °C~+70 °C
Corrugated Steeltape
Installation Temperature
-5 °C~+50 °C
PE Jacket
Mechanical Characteristics Outside
Loose Tube
Diameter
Diameter
Weight
Short Term
Long Term
Short Term
Long Term
Dynamic
Static
(mm)
(mm)
(Kg/Km)
(N)
(N)
(N)
(N)
(N)
(N)
4
8.5±0.5
3.0
77.0
1000
600
1000
300
20×D
10×D
6
8.5±0.5
3.0
77.0
1000
600
1000
300
20×D
10×D
8
8.5±0.5
3.0
77.0
1000
600
1000
300
20×D
10×D
12
8.5±0.5
3.0
77.0
1000
600
1000
300
20×D
10×D
24
9.6±0.5
4.0
94.0
1000
600
1000
300
20×D
10×D
Fiber Count
Cable
Tensile Load
Crush Load
Bend Radius
*D: Cable Diameter Compliant Standard: ITU-T G651/ITU-T G652D, ANSI/TIA B.3, IEC 794
Steel Armored Unitube with Glass Yarn Strength Member Number of fibers
9/125
50/125
62.5/125
50/125(OM3)
4
265123004
265133004
265113004
265143004
6
265123006
265133006
265113006
265143006
8
265123008
265133008
265113008
265143008
12
265123012
265133012
265113012
265143012
24
265123024
265133024
265113024
265143024
F8
Fiber Optic Outdoor Cable Non-metallic Multitube with FRP Strength Member
Structure & Environmental Characteristics Jelly
Loose tube
Material
PBT
Peripheral Strength Member
Material
fiber-glass reinforced plastic
Optical Fiber
Wrapping
Material
Waterproof tape
Loose Tube
Moisture Barrier
Material
Filling compound
Filling Compound
Sheath
Material/Color
PE/black
Wrapping Yarm
Operating Temperature
-50 °C~+70 °C
Waterproot Tape
Storage/Transport Temperature
-50 °C~+70 °C
Central Strength Member(FRP)
Installation Temperature
-30 °C~+60 °C
Outer Sheath
Mechanical Characteristics Outside
Loose Tube
Cable
Diameter
Diameter
Weight
Short Term
Long Term
Short Term
Long Term
Dynamic
Static
(mm)
(mm)
(Kg/Km)
(N)
(N)
(N)
(N)
(N)
(N)
4
2.0
9.9 ± 0.5
82
1500
600
1000
300
15×D
20×D
6
2.0
9.9 ± 0.5
82
1500
600
1000
300
15×D
20×D
Fiber Count
Tensile Load
Crush Load
Bend Radius
8
2.0
9.9 ± 0.5
82
1500
600
1000
300
15×D
20×D
12
2.0
9.9 ± 0.5
82
1500
600
1000
300
15×D
20×D
24
2.0
9.9 ± 0.5
82
1500
600
1000
300
15×D
20×D
36
2.0
9.9 ± 0.5
82
1500
600
1000
300
15×D
20×D
48
2.4
11.3 ± 0.5
106
1500
600
1000
300
15×D
20×D
72
2.4
11.3 ± 0.5
106
1500
600
1000
300
15×D
20×D
*D: Cable Diameter Compliant Standard: ITU-T G651/ITU-T G652D, ANSI/TIA B.3, IEC 794
Non-metallic Multitube with FRP Strength Member
F9
Number of fibers
9/125
50/125
62.5/125
50/125(OM3)
4
264223004
264233004
264213004
264243004
6
264223006
264233006
264213006
264243006
8
264223008
264233008
264213008
264243008
12
264223012
264233012
264213012
264243012
24
264223024
264233024
264213024
264243024
36
264223036
264233036
264213036
264243036
48
264223048
264233048
264213048
264243048
72
264223072
264233072
264213072
264243072
structured cabling system
Fiber Optic Fusion Splicer Premium Line core alignment fusion splicer can make the whole process of fiber’s fusion be finished in 25 seconds automatically. LCD color monitor makes each process of fiber fusion clear and multi-languages make users operate easily. Because of small bulk, light weight and AC/DC power supply, it is the same with the project and maintenance of telecommunications, cable TV, railway, petrochemistry, electric power, army, police and scientific research organizations.
Features 1. 9Sec fusion 2. Strong anti-dust capability 3. Auto check fiber end-face 4. High performance 5” LCD multicolor display 5. Auto parameter adjusting 6. RS-232 interface 7. Simultaneous X and Y views
Specification • Applicable Fiber: SM,MM,DS,NZDS,EDF & EXF fiber • Fiber cleaved length: 16mm(Standard) • Average fusion loss :0.02dB(SM),0.01dB(MM),0.04dB(DS) • Storage of splice result: 8000 splice result • Working Mode : Auto/Manual • Working condition: Temp. -10 °C~+50 °C,Humidity 0 ~ 95%,(RH),altitude 0~4000meter • Heat : 40Sec(Standard),Selectable • Power Supply: AC:176 ~ 264V,47/63Hz,DC:10.5 ~ 15V,10Ah • Measurement : 160mm(W)×180mm(D)×202mm(H) • Weight :4.5Kg incl. built-in battery
Fusion Splicer PART NO.
DESCRIPTION
551011000
Core Alignment Fusion Splicer, 160mm(W)×180mm(D)×202mm(H), 9seconds splicing time
551100000
Fiber / pigtail coat stripper
551200000
Fiber cleaving tool
F10
Cabinets
Network Cabinet
Accessories
structured cabling system
Cabinets
Premium Line 19" server cabinets and wall mount cabinets meet the international standards ANSI/EIARS-310-C19, ANSI/EIARS-310-D, IEC 297-3, IEC529 and DIN 40050. All cabinets are shipped in "flat pack” packing to reduce the shipping volume to 1/3. Even easy to assemble, they are designed for heavy static loading capacity. The Premium Line wall mount cabinet series offers an economical and cost effective solution for smaller installations where space is limited.
Cabinets Network Server Cabinets
Cabinets Network Server Cabinets & Wall Mount Cabinets
Cabinets Accessories
Cabinets Accessories
G1
G2
G3
G4
Cabinets Network Server Cabinet Features 1. With fixed 19" installation on the front and rear for components according to IEC 297-3 2. Detachable composite structure 3. Cable entry via bottom and top cover 4. Vertical cabinet can move backwards and forwards and adjust up and down to mount instrument 5. Fan heat dispatch device 6. Door opening 180°angle 7. Equipped with rolling foot wheel and fixed leg 8. High strength toughened glass frameless front door is simple and beautiful
Standard • Comply with ANSI/EIA RS-310-D, VDE 0100 T 540 for earthing requirement, IEC 529 / DIN 40 050 for IP requirement
Material • All are made of quality zinc-plated mild steel sheets • Material thick: 19" mounting bar 2.0mm, the whole framework 1.5mm and each door 1.2mm. • Surface treatment: Degreasing, rust cleaning, antirust phosphorizing and coating
Top
Decoration Plate
Standing Frame Fixed transom Installing pole
Fan Plate
Side door
Back door
Side door
Cable Plate Leg Front door
Wheel
Bottom
612268422
Network Server Cabinet PART NO.
DESCRIPTION
612268272
Network Server Cabinet with glass front door, height 27U, width 600mm, depth 800mm, black
612268322
Network Server Cabinet with glass front door, height 32U, width 600mm, depth 800mm, black
612268372
Network Server Cabinet with glass front door, height 37U, width 600mm, depth 800mm, black
612268422
Network Server Cabinet with glass front door, height 42U, width 600mm, depth 800mm, black
612288422
Network Server Cabinet with glass front door, height 42U, width 800mm, depth 800mm, black
Color grey on request
G1
structured cabling system
Cabinets Network Server Cabinet Features 1. With fixed 19" installation on the front and rear for components according to IEC 297-3 2. Detachable composite structure 3. Cable entry via bottom and top cover 4. Vertical cabinet can move backwards and forwards and adjust up and down to mount instrument 5. Fan heat dispatch device 6. Door opening 180°angle 7. Equipped with rolling foot wheel and fixed leg 8. Metallic vented front door
Standard • Comply with ANSI/EIA RS-310-D, VDE 0100 T 540 for earthing requirement, IEC 529 / DIN 40 050 for IP requirement
Material • All are made of quality zinc-plated mild steel sheets • Material thick: 19" mounting bar 2.0mm, the whole framework 1.5mm and each door 1.2mm. • Surface treatment: Degreasing, rust cleaning, antirust phosphorizing and coating
612168422
Network Server Cabinet PART NO.
DESCRIPTION
612168272
Network Server Cabinet with metallic front door, height 27U, width 600mm, depth 800mm, black
612168322
Network Server Cabinet with metallic front door, height 32U, width 600mm, depth 800mm, black
612168372
Network Server Cabinet with metallic front door, height 37U, width 600mm, depth 800mm, black
612168422
Network Server Cabinet with metallic front door, height 42U, width 600mm, depth 800mm, black
612188422
Network Server Cabinet with metallic front door, height 42U, width 800mm, depth 800mm, black
Color grey on request
Cabinets Wall Mount Cabinet Features 1. Detachable composite structure 2. 19" standard assembly width 3. Independent wall hanging unit for easy installation 4. Top hole is ready to mount heat dissipation fan 611264095
Wall Mount Cabinet PART NO.
DESCRIPTION
611264065
Wall Mount Cabinet, height 6U, width 600mm, depth 450mm, RAL7035
611264095
Wall Mount Cabinet, height 9U, width 600mm, depth 450mm, RAL7035
611264125
Wall Mount Cabinet, height 12U, width 600mm, depth 450mm, RAL7035
Black color on request
G2
Cabinets Accessories-Power Distribution Unit Features 1. Supplied as equipment power 2. Maximum 16A current capacity 3. Single input and 8 output outlets 4. With lighted main switch 5. Installation for standard 19inch cabinet
631210811
631210821
Power Distribution PART NO.
DESCRIPTION
631210811
Power distribution unit with aluminium body, European type, 8 outlets
631210821
Power distribution unit with non-metallic body, European type, 8 outlets
632210711
Power distribution unit with aluminium body, UK type, 7 outlets
632210721
Power distribution unit with non-metallic body, UK type, 7 outlets
633210821
Power distribution unit with aluminium body, UL type, 8 outlets
633210821
Power distribution unit with non-metallic body, UL type, 8 outlets
Cabinets Accessories- Cable Management
195010102
195020102
Cable Management
G3
PART NO.
DESCRIPTION
195010102
1U 19” Cable Management, Duct type, black
195020102
1U 19” Cable Management, Plastic Holder type, black
195040102
1U 19” Blank Panel, black
195040202
2U 19” Blank Panel, black
195040402
4U 19” Blank Panel, black
195040102
structured cabling system
Cabinets Accessories Features 1. Use with main body for assistant function. 2. Various parts improve the performance. 3. Small light load standard equipment installed on terminal board.
624100002
62510002
196000050
621000000
623000000
Accessories PART NO.
DESCRIPTION
621000000
Cooling fan for cabinet
622000000
Wheel feet for cabinet
623000000
Adjustable fixed feet for cabinet
196000050
Cage nut for cabinet, 50 sets/bag
624100002
19”Fixed Shelf for Cabinet, (W)470×(D1)350×(D2)260mm installation for 600 depth cabinets
624200002
19”Fixed Shelf for Cabinet,(W)470×(D1)550×(D2)460mm installation for 800 depth cabinets
624300002
19”Fixed Shelf for Cabinet, (W)470×(D1)650×(D2)560mm installation for 900 depth cabinets
625100002
19”Keyboard Tray for Cabinet, (W)470×(D1)350×(D2)380mm installation for 600 depth cabinets
625200002
19”Keyboard Tray for Cabinet, (W)470×(D1)350×(D2)580mm installation for 800 depth cabinets
625300002
19”Keyboard Tray for Cabinet, (W)470×(D1)350×(D2)680mm installation for 900 depth cabinets
*Grey color on request for fixed shelf and keyboard tray
Cabinets Cable ties Premium Line provides large variety of cable tie sizes 18, 40, 50, 120, 175, 250 lb. tensile strengths available in 4" to 48" lengths
Cable ties PART NO.
DESCRIPTION
626100211
Cable tie, 100×2.5mm, white, 100pcs/bag
626120211
Cable tie, 120×2.5mm, white, 100pcs/bag
626200411
Cable tie, 200×4.8mm, white, 100pcs/bag
626300411
Cable tie, 300×4.8mm, white, 100pcs/bag
Black color, 1000pcs/bag on request and Other length×width on request
G4
References Premium Line products had been installed at more than 150 projects worldwide, below a short reference list of some of them. • Trenkwalder AG, Job Agency - Austria • Olomouc University – Czech Republic • Unilever Italy – Italy • Greek High Schools – Greece • Ospedale al Mare – Italy • Maldives Hilton at Rangali Island – Maldives • ETelecare Call Center (Dell) – Philippines • Ukrsibbank – Ukraine • Mercedes-Benz Financial Services – Singapore • HSBC Training Center – Sri Lanka • Siam Nissan – Thailand • Millenium Tower – UAE
Your expert for data center cabling ! When it comes to data centers, structured cabling is the first essential building block. Making the right decisions and investment can save time, money and frustrations at start up. Data centers are comprised of a high speed, high demand networking communication systems capable of handing the traffic for SAN (storage area networks), NAS (network attached storage), file/application/web server farms, and other components located in the controlled environment. Planning and designing is mission-critical at data center facilities, building the infrastructure on which the entire enterprise will rely. The physical infrastructure is the foundation of your business and its strength and reliability is crucial.
Premium Line Data Center solutions assure you:
• Fast deployment and accurate moves, adds, and changes • Standards based open systems • High performance and high bandwidth with growth factors incorporated • Support for 10G and higher speed technologies • Support for convergence with growth factors incorporated • High quality, reliability and scalability • High capacity and density • Efficient allocation of space • Warranty installation • Initial investment protection
www.premiumline-cabling.com
