Transcript
Task Ambient Compact oval with VESA mount Top View
Style L807
Solid State (LED) H J K L
Bottom View
5-1/4" (133mm) A B C
9-7/8" (251mm)
M
B (under housing) F
6-13/16" (173mm)
E
24" (610mm)
Front View
A
Side View
10°
G
2-3/8" (60mm) E
D
D N
Suggested installation – VDTs and support system not included.
Specifications
Features
A Injection molded polycarbonate louver
D Aluminum decorative end plates
B Holographic diffusers
E
H Private/shared mode switch
C Extruded aluminum housing
Extruded aluminum grab bar
F
Bright anodized extruded downlight reflector
K Switch/dim port
Finish: Painted surfaces: 6 stage pretreatment and electrostatically applied thermoset polyester powder for durable, fade and corrosion resistant finish. Uplight louver: semi-specular vacuum metalized finish with clear polymer topcoat. Downlight reflector: extruded high purity aluminum, clear anodized specular finish. Optical Assembly: Extruded aluminum heat sinks; light engines with holographic diffusers may be removed for service or upgrade. Indirect downlight system delivers sharp cut-off forward throw distribution to maximize task coverage and visual comfort. Mounting: Universal VESA mounting interface for monitor arm mounting plates with 75mm and 100mm hole patterns. Four (4) M4 x 8mm mounting screws provided. Set mounting plate at 10 degrees above horizontal for level installation. Contact factory for use on monitor arms with limited range tilt adjustment.
7/17
G Pushbutton switch/dimmer (both ends) J
Motion sensor port
L
24V power inlet, accepts 5.5 x 2.1mm barrel connector
M VESA mounting interface N VDT support arm (not included)
interface mounts to wide range of monitor arm supports Removable light engines for service and upgrade Mode switch supports shared and private office control
strategies; independent control of uplight and downlight Connects to remote hub controller for wireless control
by remote sensors and building automation systems
Electrical: Power inlet for 24V 5.5 x 2.1mm barrel connector. Auxiliary 120VAC/24VDC high power factor plug-in power supply included. Control: Integral solid state control circuit with mode switch for private and shared office applications. Private mode personal controls: end plate pushbuttons switch and dim uplight and downlight independently. Shared mode personal controls: end plate pushbuttons switch and dim downlight only. Switch/dim port for 24V remote switching and 0-10V remote dimming of uplight. Dimming range 100%-5%. Auto-off control of downlight in shared mode via under-desk motion sensor accessory. Sensor provides auto-off control of downlight and uplight in private mode. Integral standby timer provides 30 second auto-on period after vacancy time-out. Standard: UL listed or CSA certified for U.S. and Canada.
US Patent D747030. Other US and foreign patents pending.
All-in-one task/ambient luminaire with universal VESA
LED Product Partner
Performance Unique uplight louver and indirect downlight system for visual comfort. Asymmetric forward-throw task light for broad coverage, and holographic diffusers to eliminate multi-shadow effects.
800 Cd
For complete photometrics and lumen maintenance reports, see thelightingquotient.com.
Light engine 2121 Light engine 2142
TA 16.0
To Order
Style L807 Project:
Type:
Sample number: L807-2142-V-PL-1-00-0-35-00
L 8 0 7
2 1
Style
Light Engine
Accessories
V Mount
1 Finish
Power Supply
Style L807
Options
0
3 5
0 0
Destin. Req.
Color Temp.
Control
Workstation Motion Sensor: CMS-RJ-00
Color Temperature Compact solid state (LED) task/ambient luminaire with oval profile, integral grab bar, and universal VESA mounting interface
35
3500K, 85+ CRI
Note: 3000K and 4000K emitters available on request.
24V PIR motion sensor. Mount to underside of work surface with adhesive pad or screw (provided). Includes 9ft RJ11/RJ45 interconnect cable.
Control Light Engine and Luminaire Output 2121
2142
84 mid-power Class 5630 emitters, 42 emitters down, 42 emitters up Input: 40W maximum total, including power supply. Output: 792 lm (down), 1072 lm (up) 126 mid-power Class 5630 emitters, 42 emitters down, 84 emitters up Input: 60W maximum total, including power supply. Output: 792 lm (down), 2144 lm (up)
Mounting V
VESA MIS-D interface (75x75mm and 100x100mm)
Finish
TA 16.1
02 08 PL XX
Eggshell white Semigloss black Semigloss platinum Custom color match
00
Standard configuration, includes: Dimming range 100%-5% via pushbuttons and optional wireless CCH control hub. Switch/dim port for 0-10V analog dimming override of uplight for daylight response, task tuning, and remote demand response via CCH wireless control hub (ordered separately). CCH also allows remote on/off control of luminaires plugged into unswitched power outlets. Manual “ON” override via pushbuttons activates one-hour auto-off timer when fixture is in “OFF” mode. 10 second fade to “OFF” alerts user if additional time is needed. Sensor port for use with CMS-RJ remote workstation motion sensor (ordered separately). Controls task light only in shared mode. Controls both task and ambient lights in private mode.
Wireless Control Hub: CCH-EN-02 Receives wireless input from one CLS photo sensor and one or more CMS motion sensors and CWS wall switch/dimmers. Also receives central commands via 902MHz EnOcean wireless gateways. Order sensors, switches and gateways separately. Connect up to 12 Style L807 luminaires via CRJ-11 interconnect cables and splitters. Order cables and splitters separately. See data sheet CO5 for product details.
Independent end-of-life timers for task and ambient lights signal recommended light engine replacement after 50,000 hours of use.
Power Supply 1
High-power factor 120VAC/24VDC plug-in power supply with 6' power cord and NEMA 5-15P grounded plug head. Includes quick-connect barrel jack and 6' 24-volt luminaire power cable. Power supply dimensions: 13" x 2-1/16" x 1-1/2" (330 x 52 x 38mm)
Control Cables (with 2-way splitter) CRJ-11-010-BK CRJ-11-015-BK CRJ-11-025-BK CRJ-11-035-BK
= = = =
10 ft. straight through cable, black 15 ft. straight through cable, black 25 ft. straight through cable, black 35 ft. straight through cable, black
Cable Splitters CRJ-11-SP2-00 = 2-way straight through splitter CRJ-11-SP5-00 = 5-way straight through splitter with tail
Options 00 No options XX Custom modification (specify)
Destination Requirement 0
7/17
UL listed or CSA certified for U.S. and Canada
Compatible controls and sensors. See controls data sheets for additional control accessories and systems from The Lighting Quotient. tambient from The Lighting Quotient 114 Boston Post Road, West Haven, Connecticut 06516, USA Voice 203.931.4455 Fax 203.931.4464 thelightingquotient.com
Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change without notice. Copyright © 2017 Sylvan R. Shemitz Designs, LLC, all rights reserved.
