Transcript
Stylish Thermostats For Modern Living
Domestic Heating Control Systems
Dial Type Thermostats Stylish Dial Type Thermostats
These thermostats are used in conjunction with a separate programmer.
Headline Information
Product Ranges
Key Features
Mounting Type
Flush Mount with Set Back Function - DS-SB 1 Model, suitable for radiator and water
Set Back Function Standard dial thermostats are either on or off according to the time clock controlling the system. A set back thermostat is different. It will follow the temperature set on the dial during the timed period and will automatically reduce the set temperature by 4°C when its timed to be off.
Surface mounting: DS1/DS1-L and DS1-E/DS1-EL Flush mounting: DS-SB
Temperature Range 05-35°C
A slide switch on the side of the thermostat allows you to switch between On, Permanent Off or Time Clock. In On mode, the thermostat will maintain the set temperature on the dial, but will ignore the time clock input.
Lock Facility DS1-L / DS1-EL
Indication Type LED: DS1/DS1-E/DS-SB LCD: DS1-L/DS1-EL
Surface Mount with LED Indication - DS1 Series 2 Models, suitable for water & electric heating systems.
Set Back Facility DS-SB
Dimensions DS1/DS1-L/DS1-E/DS1-EL 92x92x34mm (L,H,D) DS-SB 92x92x17mm (L,H,D)
E.U. Back Box DS-SB
Dial Type Thermostats
Surface Mount with LCD Indication - DS1-L Series 2 Models, suitable for water & electric heating systems.
Power and Heating Indication The DS1 series provides power Power and Heating Indication and heating on indication in The DS1 series provides power the form of coloured LEDs. and heating on indication in the of colouredRead-out LEDs. LCDform - Temperature
Surface Mount for Easy Installation The DS1 and DS1-L series are surface mounting for easy installation. Modern styling remains in keeping with the rest of the Heatmiser range. Dial Lock Facility The DS1-L series offers a dial lock, allowing you to reduce tampering of the heating system. A simple way of reducing your energy costs.
The DS1-L is equipped with an LCD. A turn of the dial will display the set temperature for 5 seconds before reverting back to the actual room temperature Temperature Range Limit read-out. On the DS-SB Public thermostat MAX
MAX
you can limit the temperature Temperature Range Limit range. Adjustment is only On the DS-SB Public thermostat possible by removing a screw you can the limitDS-SB the temperature making Public features range.for Adjustment is applications. only ideal commercial possible byisremoving a screw The DS-SB shipped ready making DS-SB but Public to work the in On/Off canfeatures be ideal for applications. wired to commercial work in SetBack Mode. The DS-SB is shipped ready to work in On/Off but can be wired to work in SetBack Mode.
02
FEATURES
FEATURES
AIR ONLY MODELS AIR ONLY MODELS DS1
DS1-L DS1
DS-SB DS1-L DS-SB Public DS-SB
AIR & FLOOR MODELS AIR & FLOOR MODELS DS-SB Public
DS1-E
DS1-EL DS1-E
DS1-EL
05-35 °C
05-35 °C
05-35 °C05-35 °C
05-35 °C
Flush
Surface
SurfaceSurface
Surface
Temperature Range
Temperature Range
05-35 °C
°C °C 05-35 °C05-35 °C 05-35 °C05-35 °C 05-35 05-35
Mounting Type
Mounting Type
Surface
SurfaceSurface
Set Back Function
Set Back Function
N
N
N
Y
N
Y
Y
Y
N
N
N
Digital Display
Digital Display
N
Y
N
N
Y
N
N
N
N
Y
N
Y
Time Clock Override Switch Time Clock Override Switch
N
N
N
Y
N
N
Y
N
N
N
N
N
Dial Lock
Dial Lock
N
Y
N
N
Y
Y
N
Y
N
Y
N
Y
Built In Air Sensor
Built In Air Sensor
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Remote Air Sensor
Remote Air Sensor
N
N
N
Y
N
Y
Y
Y
N
N
N
N
Floor Sensing Mode
Floor Sensing Mode
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Floor Probe Included
Floor Probe Included
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Built In Air & Floor
Built In Air & Floor
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
N
Y
Y
Y
Y
N
N
N
N
Y
N
Y
N
N
N
N
N Range Limit (Screw requiredRange to adjust) Limit (Screw required to adjust) Accuracy
Accuracy
Dimensions
Dimensions
Max Switching Current Max Switching Current
Flush Surface
Flush Flush
N
+/- 1.5°C
+/- 1.5°C +/- 1.5°C +/- 1.5°C +/- 1.5°C+/- 1.5°C +/- 1.5°C
+/- 1.5°C
+/- 1.5°C
+/- 1.5°C+/- 1.5°C
+/- 1.5°C
92x92x34mm
92x92x17mm 92x92x17mm 86x86x19mm 92x92x34mm 92x92x34mm 92x92x34mm
86x86x19mm
92x92x34mm
92x92x34mm 92x92x34mm
92x92x34mm
3A
Supply
Supply
230VAC
Weight
Weight
150g
3A
3A
3A
3A
230VAC230VAC 230VAC230VAC 150g 150g
150g
150g
3A
13A
230VAC 230VAC
3A
230VAC
230VAC
150g 150g
150g
150g
3A
13A
13A
230VAC230VAC 150g
150g
13A 230VAC 150g
Surface Mount Surface Mount Public Thermostat Flush Mount Flush Mount Public Thermostat Surface Mount Surface Mount with Set Back Function with Set Back Functionwith Range Limitwith Range Limit with with LCD LCD Indication with LCD Indicationwith with LED LED Indication with LED Indication DS1 DS1-L Series DS-SB / DS-SB PublicDS–SB Public DS-SB DS-SB DS–SB Public DS1-L Series DS1 Series DS1 Series
ylish Thermostats Stylish Thermostats For Modern Living For Modern Living
03
Slimline Thermostats Our most popular product line
Three ranges are available, available, including including our 230v Slimline Models230v for standard model, Slimline-E systems, Electric 12v Network Floor Heating Models for model those and looking our 12v toNetwork control their Models system ideal for those lookingFloor to control their centrally. centrally and Electric Models for system those with Electric Floor Heating.
Headline Information
Product Ranges
Key Features
Mounting Type Flush mounting
Model 230v Models Can be used to upgrade existing thermostats thermostats and and can existing can be used in conjunction be used in conjunction with with our UH4 and UH8 our UH2 and UH3 wiring centres. wiring centres.
Modern Slimline Appearance The slimline thermostat series is flush mounting, resulting in a depth of only 13mm after a depth of only 13mm after installation. installation.
12v Network Models Have been designed to work as part of a network system, 12v Network Models and can be used in conjunction Have been designed to work with ourofUH1 wiring system, centre and as part a network network products. and can be used in conjunction with our UH8-N wiring centre *See pages 25 for system and network products. overview. *See pages 25 for system overview. Electric Floor Model Supplied with a remote floor sensor, the Slimline-E offers the ability to measure room temperature, floor temperature or both. The Slimline-E is rated at 16A making it ideal for electric Electric Floor Model floor heating. Supplied with a remote floor sensor, the Slimline-E offers the ability to measure room temperature, floor temperature Sensor Housing or both. The Slimline-E is rated Part Ref: Heatmiser EN030 at 16A making it ideal for electric This sensor housing is ideal for floor heating. use in en-suites to house the remote sensor probe.
Holiday Function Reduces the set temperature in your home for the duration Holiday Function of your holiday and returns Reduces the set temperature to your programmed to in home forsettings the duration ensure home warm on of your your holiday andisreturns to programmed settings to your return. ensure your home is warm on your return. Temperature Override Allows you to adjust the desired temperature in your home without the need to fully duration - ideal for parties. re-program the thermostat. After which, the thermostat This new set temperature will will revert back to the Temperature Hold Facility Temperature Override be maintained until the next programmed setting. Allows you to hold a set Allows you to adjust the desired programmed setting. temperature for a specific temperature in your home duration - ideal for parties. without the need to fully AfterProbe which, the thermostat re-program the thermostat. Remote Sensor will revert back to the This new set temperature will MISC103 setting. programmed be maintained until the next Part Ref: Heatmiser This remote sensor probe can be used to programmed setting.
Temperature Range 05-35°C 41-95°F Lock Facility Yes - All models Indication Type LCD with Blue Back Light Dimensions Optional Extras 98x85x16mm (L,H,D) Infrared Remote Control (13mm Installed) Dimensions E.U. Back Box(L,H,D) 98x85x16mm (13mm Installed) E.U. Back Box
Slimline Thermostats
Frost Protection Remote Control A protect Allfunction models designed within ourtoslimline your against frost. serieshome are compatible with our An adjustable frost Infrared remote control. temperature level can be (Part Reference: RM1) programmed, between
7°C - 17°C, ensuring your home is always protected against the Energy Saving Start elements whilst Optimum you are away. Calculates the amount of heat up time required to ensure Energy Saving Optimum Start your home is warm when you Calculates the amount of heat wake and return home. This up time required to ensure is automatically optimised your home is warm when you wake and return home. This you throughout the year to save is automatically optimised money. throughout the year to save you money. Hold Facility Temperature Allows you to hold a set
probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
04
FEATURES
230V
12V
ELECTRIC FLOOR MODEL
Slimline
Slimline-N
Slimline-HW-N
Slimline-E
Temperature Range
05-35 °C 41-95 °F
05-35 °C 41-95 °F
05-35 °C 41-95 °F
05-35 °C 05-95 °F
Blue Back Lit Screen
Y
Y
Y
Y
5/2 Day Programming Mode
Y
Y
Y
Y
7 Day Programming Mode
Y
Y
Y
Y
Number of Heating Levels
4
4
4
4
Optimum Start
Y
Y
Y
Y
Number of HW Times
N
N
Y
N
Holiday Function
Y
Y
Y
N
Keylock Function
Y
Y
Y
Y
Temperature Hold Function
Y
Y
Y
Y
Temperature Override
Y
Y
Y
Y
Temperature Override Limit
Y
Y
Y
Y
Frost Protection
Y
Y
Y
Y
Networking Facility
N
Y
Y
N
°C / °F Option
Y
Y
Y
Y
Remote Air Sensor Connection
Y
Y
N
Y
Remote Air Sensor Included
N
N
N
N
Built In Air Sensor
N
Y
Y
Y
Floor Sensing Mode
N
Y
N
Y
Floor Sensor Included
N
N
N
Y
Max Switching Current
3A
3A
3A
16A
+/-1 °C
+/-1 °C
+/-1 °C
+/-1 °C
Y
Y
Y
Y
230VAC
12VDC
12VDC
230VAC
Accuracy Adjustable Switching Differential Supply
98x85x13mm(L,H,D)
Installed Dimensions
98x85x13mm(L,H,D)
98x85x13mm(L,H,D)
Thimble Sensor
Remote Sensor Probe
Part Ref: Heatmiser Thimble Sensor The Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Part Ref: Heatmiser MISC103 This remote sensor probe can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Stylish Thermostats For Modern Living
05
Edge Thermostats
Wireless Air Sensor & Door Contact Switch Facility
The edge is our 3A conventional heating model whereas the edge-e has been designed for electric floor heating. Both include Modbus communication and are compatible with our Wireless Air Sensor and Window/Door Switch.
Headline Information
Key Features
Mounting Type Flush mounting
Modern Appearance
Modbus Connection
Temperature Hold Facility
The Edge Thermostat Series has been designed to offer an ultra slim profile after installation. With a depth of only 15mm once installed, the floating edge appearance of the edge and edge-e will complement the décor in any home.
The Edge Thermostat Series offer a Modbus RTU RS-485 Network connection, allowing control of up to 32 thermostats from a central system master.
Allows you to hold a set temperature for a specific duration – ideal for parties. After which, the thermostat will revert back to the programmed setting.
Temperature Range 05-35°C 41-95°F Lock Facility Yes – PIN Code Indication Type LCD with White Back Light
Dimensions 90x90x40mm
Edge Thermostats
Wireless Air Sensor Function A wireless air sensor function is available with 2 operating modes. A single wireless air sensor can be used to measure the air temperature from a different location to the thermostat or a wireless air sensor can be used in conjunction with the built in thermostat sensor to provide an averaged air temperature, perfect for larger rooms.
Door & Window Contact Sensor Function With rising energy costs, it really doesn’t make sense to heat the street when we have our windows and doors open.
PIN Code Locking the Edge Thermostats with a 4-digit PIN Code is the best way to save energy, giving access to only those that require it.
Energy Saving Optimum Start Calculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save you money.
Electric Floor Model (edge-e) Supplied with a 3M floor probe, the edge-e offers the ability to measure room temperature, floor temperature or both. The edge-e is rated at 16A making it ideal for electric floor heating.
Holiday Function Reduces the set temperature in your home for the duration of your holiday and returns to programmed settings to ensure your home is warm for your return.
06
FEATURES
230V
ELECTRIC FLOOR MODEL
Edge
Edge-E
05-35° C 41-95°F
05-35° C 41-95°F
White Back Light
Y
Y
Heating / Timer Option
Y
Y
Non Programmable Mode
Y
Y
24 Hour Programming
Y
Y
5/2 Day Programming
Y
Y
7 Day Programming
Y
Y
Number of Heating Levels
4 or 6 Selectable
4 or 6 Selectable
Number of Timer Levels
Temperature Range
4 or 6 Selectable
4 or 6 Selectable
Optimum Start
Y
Y
Holiday Function
Y
Y
Key-lock Function
Y
Y
Temperature Hold Function
Y
Y
Temperature Override
Y
Y
Temperature Override Limit
Y
Y
Frost Protection
Y
Y
Networking Facility
Y
Y
°C/ °F Option
Y
Y
Wireless Air Sensor Function
Y
Y
Wireless Door Contact Function
Y
Y
Built in Air Sensor
Y
Y
Floor Sensing Mode
Y
Y
Floor Sensor Included
N
Y
Max Switching Current
3A
16A
Accuracy
1° C
1° C
Y
Y
230V AC
230V AC
90x90x15mm
90x90x15mm
Adjustable Switching Differential Supply Installed Dimensions
Wireless Air Sensor
Wireless Door & Window Contact Switch
The Wireless Air Sensor provides an easy way to measure the air temperature remote from the Edge Thermostat. In addition, the Wireless Air Sensor can be used with the built in Air Sensor to provide an average temperature reading.
The Wireless & Door Contact Switch provides a way of turning your heating off when a door or window is open. In such cases a window icon is indicated on the thermostat display so the user knows why the heating has been turned off.
Stylish Thermostats For Modern Living
07
TouchScreen Thermostats Making your life a little easier
The intuitive TouchScreen display makes searching for the user manual a thing of the past.
Headline Information
Product Ranges
Key Features
Mounting Type Flush mounting
230v Models
5/2 & 7 Day Programming
Frost Protection
Can be used to upgrade existing thermostats and can be used in conjunction with our UH4 and UH8 wiring centres.
5/2 Day mode is ideal for those who keep to one schedule Monday - Friday and another for the weekend. 7 Day mode allows you to have a different schedule for each day of the week. Ideal for families with changing schedules.
A function designed to protect your home against frost. An adjustable frost temperature level can be programmed, between 7°C - 17°C, ensuring your home is always protected against the elements whilst you are away.
12v Network Models
Adjustable Switching Differential
Keylock Function
Temperature Range 05-35°C 41-95°F Lock Facility Yes - All models
Adjustable Switching Differential 0.5-3°C
Have been designed to work as part of a network system, and can be used in conjunction with our UH8-N wiring centre and network products. See page 24 and 25 for our system overview.
Dimensions
Air / Floor Models
Networking Facility
Two Zone Models
Are supplied with a remote floor sensor and provide the ability to measure room temperature, floor temperature or both. The Touch-E offer 16A switching making them ideal for electric floor heating.
Control your heating from anywhere. Our 12v network thermostats offer you the ability to control your heating centrally, with the use of our TouchPad. Take a look at pages 24-25 for more details on our network products.
The Touch-Duo is ideal for bedrooms with ensuite. Zone one uses the built in air sensor whilst zone two uses the remote thimble sensor provided.
Indication Type LCD with Blue Back Light
110x100x17mm (L,H,D)
E.U. Back Box
Touch Screen Thermostats
Our TouchScreen Series has an adjustable switching differential from 0.5°C - 3°C. This function allows you to get even tighter control of your heating system.
Locking the thermostat keypad is an easy way to save energy. Allowing access to only those that require it.
08
FEATURES
230V
12V
ELECTRIC FLOOR MODEL
Touch
Touch-Duo
Touch-N
Touch-HWN
Touch-E
Blue Back Lit Screen
Y
Y
Y
Y
Y
5/2 Day Programming Mode
Y
Y
Y
Y
Y
7 Day Programming Mode
Y
Y
Y
Y
Y
Number of Heating Levels
4
4
4
4
4
Optimum Start
Y
Y
Y
Y
Y
Number of HW Times
0
0
0
4
0
Number of Zones
1
2
1
1
1
Holiday Function
Y
Y
Y
Y
Y
Keylock Function
Y
Y
Y
Y
Y
Temperature Hold Function
Y
Y
Y
Y
Y
Temperature Override
Y
Y
Y
Y
Y
Temperature Override Limit
Y
Y
Y
Y
Y
Frost Protection
Y
Y
Y
Y
Y
Networking Facility
N
N
Y
Y
N
°C / °F Option
Y
Y
Y
Y
Y
Built In Air Sensor
Y
Y
Y
Y
Y
Remote Air Sensor Connection
Y
Y
Y
N
Y
Remote Air Sensor Included
N
N
N
N
N
Thimble Air Sensor Included
N
Y
N
N
N
Floor Sensing Mode
N
N
Y
N
Y
Floor Sensor Included
N
N
N
N
Y
Max Switching Current
3A
3A
3A
3A
16A
+/-1°C
+/-1°C
+/-1°C
+/-1°C
+/-1°C
Adjustable Switching Differential
0.5 - 3°C
0.5 - 3°C
0.5 - 3°C
0.5 - 3°C
0.5 - 3°C
Supply
230VAC
230VAC
12VDC
12VDC
230VAC
Accuracy
Thimble Sensor
Remote Sensor Probe
Part Ref: Heatmiser Thimble Sensor The Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Part Ref: Heatmiser MISC103 This remote sensor probe can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Stylish Thermostats For Modern Living
09
Battery BatteryThermostats Thermostats
Slimline Slimlinedesign designtotocompliment complimentany anyenvironment environment Battery Battery Thermostat Thermostat Series Series Headline Headline Our Our battery battery thermostats thermostats areare a viable a viable upgrade upgrade route route forfor those those with with a dial a dial thermostat thermostat working working onon a 2awire 2 wire system. system. Information Information TheThedesign design follows follows ourour slimline slimline thermostat thermostat series series with with Non-programmable Non-programmable and and Programmable Programmable models models being being available. available. Key Key Mounting Mounting Type Type Battery Battery Thermostats: Thermostats: Features Features Surface Surface mounting mounting Time Time Clocks: Clocks: Flush Flush mounting mounting
Battery Battery Thermostat Thermostat Temperature Temperature Range Range 05-35°C 05-35°C
Lock Lock Facility Facility
Battery Battery powered powered
Surface Surface mount mount
Powered Powered from from 2 x2AAA x AAA Batteries Batteries – suitable – suitable forfor 2 wire 2 wire heating heating systems. systems.
Our Our battery battery thermostats thermostats areare surface surface mounted mounted forfor easy easy installation, installation, making making them them perfect perfect forfor thethe
Optimum Optimum Start Start
Key Key Lock Lock Function Function
A feature A feature whereby whereby thethe thermostat thermostat calculates calculates thethe amount amount of of heat heat upup time time required, required, is is standard standard onon thethe Programmable Programmable model model (PRT-B). (PRT-B).
Our Our battery battery thermostats thermostats areare equipped equipped with with a a keykey lock lock helping helping to to prevent prevent energy energy usage usage byby restricting restricting access. access.
YesYes - All - All models models
Indication Indication Type Type LCD LCD with with Blue Blue Back Back Light Light
FEATURES FEATURES
Dimensions Dimensions Battery Battery Thermostats: Thermostats: 86x99x24mm 86x99x24mm (L,H,D) (L,H,D) Slimline Slimline Time Time Clocks: Clocks: 98x85x16mm 98x85x16mm (L,H,D) (L,H,D) TouchScreen TouchScreen Time Time Clocks: Clocks: 92x92x17mm 92x92x17mm (L,H,D) (L,H,D)
E.U. E.U. Back Back Box Box Time Time Clock Clock Only Only
BATTERY BATTERY THERMOSTATS THERMOSTATS DT-B DT-B
PRT-B PRT-B
5/25/2 DayDay Programming Programming Mode Mode
N N
Y Y
7 Day 7 Day Programming Programming Mode Mode
N N
Y Y
Number Number of Heating of Heating Levels Levels
1 1
4 4
Optimum Optimum Start Start
N N
Y Y
Holiday Holiday Function Function
N N
Y Y
Keylock Keylock Function Function
Y Y
Y Y
Temperature Temperature Hold Hold Function Function
N N
Y Y
Temperature Temperature Override Override Limit Limit
Y Y
Y Y
Frost Frost Protection Protection
Y Y
Y Y
°C /°C °F/Option °F Option
Y Y
Y Y
Built Built In Air In Air Sensor Sensor
Y Y
Y Y
Accuracy Accuracy
+/-1°C +/-1°C
+/-1°C +/-1°C
Y Y
Y Y
Supply Supply
2 x 2AAA x AAA
2 x 2AAA x AAA
Battery Thermostats & Time Clocks
Battery Battery Thermostat Thermostat Part Part Ref: Ref: Heatmiser Heatmiser PRT-B PRT-B
10
es
s
Time Clocks FEATURES
AIR ONLY MODELS
ELECTRIC FLOOR MODELS
ELECTRIC FLOOR MODELS
AIR ONLY MODELS
Simple to use Single and 4 Channel Time Clocks SLIMLINE WIRELESS SERIES
DT-W
PRT-W
COMPATIBLE RECEIVERS
PRTHW-W
DT-EW
FEATURES
TOUCHSCREEN WIRELESS SERIES
PRT-EW
N
N
N
N
NTM4-TS
N
N
N
N
Keypad Y
TouchScreen N
Y
N
Y
N
N
Y
N
N
N
N
N
Y N 1
N
Y
N
Y
Y
N
N
N
N
N
Y
Y
RC1-WTS Compatible
N
Blue N N Back Lit Screen
N
RC2-WTS Compatible
N
Keypad/TouchScreen N N
UH1-W Compatible
Y
5/2 Day Programming SlimlineMode Time
Number of Zones
Y
Y
05-35 °C
05-35 °C
05-35 °C
05-35 °C
05-35 °C
41-95 °F
41-95 °F
41-95 °F
41-95 °F
41-95 °F
Y
Y
N
Y
Y
Y
N
Y
4
4
1
4
Clock
N
5/2 Day Programming Mode Number of Switching Times + Boost Facility
N N
Y
1
Optimum Start
N
Y Function Y Countdown Timer
N
Y
Number of HW Times
0
4 0 Holiday Function
0
0
Holiday Function
N
Y Y Keylock Function
N
Y
Keylock Function
Y
Y Y Manual Override
Y
Y
Y
Temperature Hold
N
Networking Facility Y Y
N
Y
N
Temperature Override
Y
Max Y Switching YCurrent
Y
Y
3A
Frost Protection
Y
Changeover Output Option Y Y
Y
Y
Supply
Y
Y
Y
Y
Y 4
N
N
Y
N
N
Y
1
N
4 Y
41-95 °F
4
Number of Heating Levels
TouchScreen TimeClockY
Y 05-35 °C
Y
N
°C / °F Option
N
N
7 Day Programming Part Ref:Mode Heatmiser TM1
Copy Facility
PRTHW-UWTS PRTHW-WTS TIME CLOCKS 12V NETWORK MODELS
TM1
Y
RC2-W Compatible
7 Day Programming Mode
PRT-WTS PRT-UWTS
230V MODELS
RC1-W Compatible
Temperature Range
DT-UWTS DT-WTS TIME CLOCKS
Y
DT-EWTS PRT-EWTS
N
N
N
N
N
N
Keypad
N
N
N
Y
N
Y
Y
Y
N
N
TM1-N
1 Y
05-35 °C
05-35 °C
05-35 °C
05-35 °C
41-95 °F
41-95 °F
41-95 °F
41-95 °F
Y
Y
N
Y
Y
N
Y
4
1
4
Y
YY
N
Y
Y 4
N
Y
N
4
N
Y
N
N
Y
0
Y
0
Y4
0
0
Y
N
Y
Y
YY
N
Y
Y
Y
Y
YY
Y
Y
N
N
Y
YY
N
Y
Y
3A
Y
3A Y
Y
Y
Y
Y
N
Y
NY
Y
Y
230VAC
Y
230VAC
Y
12VDC
Y
Y
Y
Built in AirPart Sensor Ref: Heatmiser TM4
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Remote Air Sensor Connection
N
Y
N
Y
Y
N
N
N
N
N
Remote Air Sensor Included
Product Ranges Floor Sensor Included
N
N
N
N
N
N
N
N
N
Floor Sensing Mode
N
N
Y
Y
N
N
N
Y
Y
N
N
N
N
N
N
N
+/-1°C
+/-1°C
+/-1°C
Y
Y
Y
Accuracy
N +/-1°C
230v Models Y Are designed to work with Wireless Failour SafeUH8 Function wiring centre and Y RF Frequency dial thermostat with set868MHz Operationalback Radiofunction, Range providing Up to (Open Space)
100M
Key NN N N Features +/-1°C
+/-1°C
+/-1°C
+/-1°C
+/-1°C
+/-1°C
Y
Y
Y
Y
Y
Y
Number of Zones
A single zone can be Y Y controlled on the TM1 868MHz 868MHz 868MHz series and 4 zones can Up to on the Up Up tobe controlled to TM4 100Mseries. 100M 100M Y
A mode select button This programmable function allows Y Y Y Y Y providing an easy method you to extend the program time, 433MHz | 868MHz 433MHz 433MHz | 868MHz 868MHz of switching 433MHz | 868MHz between in 30 minute increments - ideal for Up to Up to Up to Up to permanent Upon, to permanent unscheduled operation of the system. Y
100M
100M
Power
2 x AAA
2 x AAA
2 x AAA
2 x AAA
2 x AAA mode) TM4 only.
Battery Lifetime
Typically
Typically
Typically
Typically
Typically
12v Network Models Have been designed to 1 Year USB Power work Lead Included as part of a network N Mounting Type system, and can be used Wall Dimensionsin conjunction with our UH8-N wiring centre and network products.
Number of 1 Year Switching Times 1 Year
1 Year N
N
N
Wall Wallprovided on all time Wall 85mm(L) 98mm(H)allowing x 24mm(D) clockxmodels,
heating system.
Stylish Thermostats For Modern Living
+ Boost Facility
1 Year N Wall
100M
Typically
Typically
6-8 Months
6-8 Months
Countdown Timer
100M
100M
Rechargable Battery (Mini USB Connection) Typically
Typically
6-8 Months
6-8 Months
From Towel Rails to Lighting
A simple yet useful function All time clock models can be used to control Y heating system. In Y Y that enablesY the output anything - not just your Wall/Desk Stand Stand Wall/Desk Standfact, those using Wall/Desk Stand for the duration of the our networking systemWall/Desk can 110mm(L) x 100mm(H) x 20mm(D) programmed countdown control each time clock independently from time. the TouchPad or over the internet, so it makes sense to use one of our time clocks wherever you want complete control.
11
Wireless Thermostats Wireless design for easy installation
alternative, and are the ideal choice for extensions or when you are looking to relocate your thermostat.
Headline Information
Key Features
Mounting Type
Relocate
App Control
Fail Safe
Slimline-RF: Wall Touch-RF/neoAir: Wall/Desk
Many thermostats are sited incorrectly, causing your boiler to come on more than necessary. A wireless thermostat allows you to move your thermostat to a more suitable position, without the need to run additional cables. What’s more, our TouchScreen models have a desk stand, enabling you to move the thermostat around the house with you.
Up to 32 neoAir or a mixture of neoAir and neoStat can be paired to a neoHub to offer local and remote control of the multi zone heating system. neoAir are perfect for extensions or areas where a wired thermostat isn’t possible.
A loss of wireless connection could leave your home vulnerable to frost damage. The fail safe function enables the heating for 20% of the time, ensuring the temperature in your home does not drop to dangerous levels.
LCD with Back Light
Key Lock Function
Compatible Electric FloorReceivers Model
Replaceable Batteries
Dimensions
A simple way to reduce tampering of the system settings, and standard across our wireless thermostat series.
Our Wireless thermostats are compatible withof our models are capable 2switching channel RF-Switch and up to 16A and 8 zone UH8-RF wireless receivers.
The Slimline RF and neoAir use standard AAA batteries.
Temperature Range 05-35°C 41-95°F
Lock Facility Yes - All models
Indication Type
neoAir: 86x86x26mm (L,H,D) TouchScreen Thermostats: 110x100x21mm (L,H,D) Battery Thermostats: 86x99x24mm (L,H,D)
Slimline RF
Wireless Thermostats
Touch RF
neoAir
12
Slimline-RF
Touch-RF
neoAir
RF Switch
Y
Y
Y
UH8-RF
Y
Y
Y
FEATURES
Compatible Receivers
App Control Operating Type Temperature Range
N
N
Y
Button
Touchscreen
Touch Key
05-35 °C - 41-95 °F
05-35 °C - 41-95 °F
05-35 °C - 41-95 °F
Heating Only Mode (Selectable by User)
Y
Y
Y
Timer Only Mode
N
N
Y
Heating & Hot Water Mode (Selectable by User)
Y
Y
Y
Non Programmable Mode
Y
Y
Y
5/2 Day Programming Mode
Y
Y
Y
7 Day Programming Mode
Y
Y
Y
Number of Heating Levels
4
4
4
Optimum Start
Y
Y
Y
Number of HW Times
4
4
4
Holiday Function
Y
Y
Y
Keylock Function
Y
Y
Y
Temperature Hold
Y
Y
Y
Temperature Override
Y
Y
Y
Frost Protection
Y
Y
Y
C/F Function
Y
Y
Y
Built in Air Sensor
Y
Y
Y
Remote Air Sensor Connection
Y
N
Y
1 °C
1 °C
1 °C
Adjustable Switching Differential
Y
Y
Y
Wireless Fail Safe Function
Y
Y
Y
868MhZ
868MhZ
868MhZ
Up to 100M
Up to 100M
Up to 100M
N/A
N/A
Up to 30M
2 X AAA
Rechargeable Battery
4 X AAA
1 Year
1 Year
1 Year
N
Y
N
Wall
Wall/Desk
Wall/Stand
85mm(L) x 98mm (H) x 24mm
110mm(L) 100mm (H) x 20mm (D)
86mm(L) x 86mm (H) x 26mm
Accuracy
RF Frequency RF Range (UH8-RF/RF Switch) App Data Range Power Battery Lifetime USB Power Lead Included Mounting Type Dimensions
Stylish Thermostats For Modern Living
13
Wireless Receivers Wireless Receivers as well as conventional radiator systems.
Our wireless receivers are designed to work with our wireless thermostats and are ideally suited for water underfloor heating and Slimline Thermostat Wireless Receivers conventional heating systems.
Headline Information Headline Mounting Type Information Slimline & TouchScreen Receivers:
Wireless Receiver for Twin Heating Zones Part Ref: Heatmiser RC1-W
Heatmiser RF Switch
capable of controlling two heating zones, using our DT-W/PRT-W or The Heatmiser RF Switch is ourusing surface 2 channel RF Receiver one heating and one hot water zone, ourmount PRTHW-W. compatible with the Slimline-RF, Touch-RF and neoAir Thermostats.
Flush Mounting Mounting Type UH1-W Wiring Centre: RF Switch / Boost Wall Mount UH8-RF Surface Mounting
Part Ref: Heatmiser RC2-W Touch-RF or neoAir in Heating Only mode or a A single Slimline-RF,
Indication Type LED
single Slimline-RF, Touch-RF or neoAir in Heating/Hot Water mode can be paired to the RF Switch. with our DT-EW or PRT-EW thermostat and is supplied with a 3 meter
Indication Type LED
Dimensions
In addition to the two changeover contacts for the heating and hot water circuits, the RF Switch provides a volt free switch for the boiler.
Slimline & TouchScreen Receivers: Dimensions 86x86x16mm (L,H,D) RF Switch / Boost Wiring Centre Receiver: 108x90x24mm (L,H,D) 290x200x70mm (L,H,D) UH8-RF: 384x148x60mm (L,H,D)
The RF Switch can be paired to multiple UH8-RF, Slimline Wireless Repeater
Compatability
Wireless Slimline Thermostats Compatibility DT-W, PRT-W, PRT-EW, PRTHW-W Button Wireless Thermostat Wireless TouchScreen Thermostats Part Ref: Slimline-RF DT-UWTS, PRT-UWTS, PRTHW-WUTS Touchscreen Wireless Thermostat Part Ref: Touch-RF
Wireless Receivers
UH1-W, RC1-W, RC2-W App Wireless Thermostat Part Ref: neoAir
E.U. Back Box
providing a wireless link for Part Ref: WR1 boilerrepeater, signal. designed to extend the communication The WR1 is our 230v powered the wireless distance between the thermostat and receiver. 8 Zone Wiring Centre Part Ref: Heatmiser UH8-RF
Heatmiser Boost
TouchScreen Thermostat Wireless Receivers
The Heatmiser Boost is our surface mount 230v powered wireless
Wireless Receiver for Twinrepeater Heating for Zones the RF and Neo systems designed to extend the Part Ref: Heatmiser RC1-WTS communication distance between the thermostat and receiver. TouchScreen wireless thermostats. Two heating zones can be controlled using our DT-WTS/PRT-WTS or alternatively, one heating and one hot water zone can be controlled from this receiver using our PRTHW-WTS.
Wireless Receivers
14
FEATURES
Mounting Type Compatible with
RF-Switch
UH8-RF
Surface
Surface
Slimline-RF/Touch-RF/neoAir
Slimline-RF/Touch-RF/neoAir
Number of Channel
2
8
Fail Safe
Y
Y
Power
230V AC
230V AC
Rating
3A
3A
Optional Extendable Aerial
N
Y
868MHz
868Mhz
Operating Frequency Range(Open Space)
100M
100M
Pump Output
N
Y
Zone, HW & Pump Output Test Mode
N
Y
Boiler Enable
Y
Y
HW Cylinder Thermostat Connection
N
Y
Per Zone UFH / Radiator Selection
N
Y
Wireless Wiring Centre Wireless 230v 8 Zone Wiring Centre Part Ref: Heatmiser UH8-RF The UH8-RF is designed to be used in conjunction with our Slimline-RF/Touch-RF and neoAir Wireless Thermostats. The UH8-RF provides central switching and is therefore ideally situated next to the underfloor heating manifold. Eight zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler making it compatible with almost all types of boilers. The RF Switch can also be paired to multiple UH8-RF providing a wireless link for the boiler enable signal. Up to 6 actuators can be connected to each zone. An external aerial is available for use when the UH8-RF is being mounted in a metal cupboard or when the wireless signal is restricted. A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump and underfloor heating valve when there is a call for heat.
Stylish Thermostats For Modern Living
15
WiFi Smart Thermostat SmartStat is our all-new WiFi Connected Thermostat with full colour LCD. Now is the time to take control of your multi zone heating and hot water system from anywhere. What’s more, our Geo Location feature ensures you never heat an empty home.
Headline Information
Key Features
Mounting Type Flush mounting
Control from your SmartPhone
Temperature Range 05-35°C 41-95°F Indication Type 2.8” Full Colour LCD
Dimensions 95x95x45mm (15mm installed)
E.U. Back Box
SmartStat
SmartStat has built in WiFi so connects directly to your Home Router. As SmartStat connects to your SmartPhone via our cloud server setup is a dream and will take minutes – no technical setup here. SmartStat is compatible with iPhone & iPad and with Android SmartPhones & Tablets.
Heat or Timer Option The SmartStat can be setup to work in either Heat or Timer mode, so is perfect for controlling heating zones or timer zones such as towel rails and hot water.
Frost Protection
Geo Location
Don’t worry we have your home covered. The in built frost protection feature will protect your home against the elements.
Geo Location uses the mobile phone masts, nearby WiFi and your GPS to calculate your position. When you setup Geo Location on the SmartStat App, you set a leaving and returning trigger. When you pass these triggers, SmartStat will adjust the temperature in your home automatically.
Thermostat and Programmer in One Gone are the days of having a separate programmer and thermostat. SmartStat is both in one so you no longer have to fiddle with the awkwardly positioned thermostat.
Comfort Programming Now is the time to re-think how you heat your home. SmartStat lets you have different temperatures at different times of the day, not only an energy saving feature but one that creates for a more comfortable living environment too. The Self Learning Optimum Start feature will automatically calculate when your heating should be on, so it’s one less thing for you to worry about.
Multi-Zone Up to 32 SmartStats can be controlled within one location without the need for any network hub. Global features such as Temperature Hold, Key Lock and Home/Away are all available on the SmartStat App. Multi User Multiple users can login to the SmartStat App and take control of the heating & hotwater from anywere. In addition, Geo Location can be configured on each persons device meaning the heating is turned off when the last person has left home and back on when the first person returns.
16
FEATURES
SMARTSTAT
Available in 3 Colours
05-35 °C 41-95 °F
Temperature Range Blue Back Lit Screen
Y
Non-Programmable Mode
Y
5/2 Day Programming Mode
Y
7 Day Programming Mode
Y
24 Hour Programming Mode
Y
Number of Heating Levels
4
Optimum Start
Y
Number of HW Times
0
Holiday Function
Y
Temperature Hold Function
Y
Temperature Override
Y
Temperature Override Limit Frost
Y
Protection
Y
App Control
Y
°C / °F Option
Y
Remote Air Sensor Connection
Y
Built In Air Sensor
Y
Floor Sensing Mode
Y
Floor Sensor Included
N
Max Switching Current
3A
Glacier White
Sapphire Black
+/- 1°C
Accuracy Adjustable Switching Differential
+/- 1-3°C
Supply
230VAC
Output
Volt Free Contact 95x95x15mm (L,H,D)
Installed Dimensions
128g
Weight
Platinum Silver
Thimble Sensor
Remote Sensor Probe
Part Ref: Heatmiser Thimble Sensor The Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Part Ref: Heatmiser MISC103 This remote sensor probe can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Stylish Thermostats For Modern Living
17
Multi Zone App Control The Neo system has been designed to offer complete local and App control of your heating, hot water and plug-in appliances. With Neo you can control your heating from anywhere using your SmartPhone or Tablet. The neoAir offers a totally wire free alternative to the neoStat and is perfect for extensions or additional zones.
Headline Information Connectivity Standard Mesh Network Topology (neoStat) Point to Point (neoAir) Lock Facility Yes - All models SmartPhone App iPhone / iPad Android Tablet & Phone Kindle Devices Windows Phone Supported
neoStat
Key Features HomeKit Compatible HomeKit and the Home app in iOS 10 lets you securely control any "Works with Apple HomeKit” accessory. You can also organize your accessories by room, manage multiple accessories at the same time, control your home with Siri, and more.
API
API - Third Party Integration Our published API (JSON) makes it easy for third party integration companies to integrate our Neo Network System with leading home automation brands products from companies such as Control4 and Crestron.
Multi-Locations During the installation of the app, you are prompted to create an account on the Heatmiser Cloud Server after which multiple locations can be created. Logging into to your account from another device will present all of your Locations for quick and easy access.
Multi-Zone The Heatmiser Neo Network system has been built from the ground up with multi-zone homes in mind. The neoHub coordinates the data between each Neo thermostat on the network.
18
neoUltra Central Control The neoUltra has been designed to work as a standalone thermostat, or as part of an app controlled Neo System. In addition, the neoUltra can operate as a central controller, providing a single point of access to all of the neoStat, neoAir & neoPlug in the home.
Headline Information
Key Features
Features Thermostat Mode Timer Mode Temperature Range
Mounting Type neoUltra – Flush Mounting Temperature Range 05-35C 41-95F Lock Facility Yes Indication Type TFT LCD with Backlight Dimensions (When installed) 107x89x17mm
Thermostat & Central Control The Heatmiser neoUltra is a thermostat and central control in one, making the neoUltra the perfect addition to your Neo System. Install the neoUltra in a central position in your home and benefit from the always-on central control for all your heating zones, hot water and neoPlugs.
Display
Global Functions With the Heatmiser neoUltra you can make changes for multiple rooms in your home at the same time. So, whether you want to enable the Away function on your way out or boost the temperature in a couple of rooms, with the neoUltra it couldn’t be easier. Heat or Timer The Heatmiser neoUltra has been designed to work in thermostat or timer mode, so is perfect for controlling heating zones or timer zones such as towel rails and hot water.
neoUltra Y Y 05-35C / 41-95F 3.5” TFT LCD
Back Lit Screen
Y
Non Programmable
Y
5/2 Day Programming Mode
Y
7 Day Programming Mode
Y
24 Hour Programming Mode
Y
Number of Heating Levels
4
Optimum Start
Y
Holiday Function
Y
Temperature Hold Function
Y
Temperature Override
Y
Temperature Override Limit
Y
Frost Protection
Y
App Control
Y
C/F Option
Y
Remote Air Sensor Connection
Y
Built in Air Sensor
Y
Floor Sensing Mode
Y
Floor Sensor Included
N
Max Switching Current Accuracy Adjustable Switching Differential
3A +/- 1C +/- 3C
Supply
230V AC
Output
Volt free contact
Installed Dimensions
107x89x17mm
Energy Saving Optimum Start neoUltra calculates the amount of heat up time required to ensure your home is warm when you wake and return home. This is automatically optimised throughout the year to save money.
Stylish Thermostats For Modern Living
19
Modern touch technology The neoStats havetouch been designed to be simple to use and make programming simple with the new intuitive menu navigation. Modern technology
The neoStats can be controlled from anywhere thanks to the plug and play neoHub, and are available in Glacier White, Sapphire Black and Platinum Silver. The neoStats have been designed to be simple to use and make programming simple with the new intuitive menu navigation. The neoStats can be controlled from anywhere thanks to the plug and play neoHub, and are available in Glacier White and Sapphire Black.
Headline Information Headline Information Mounting Type
Key Features Key Features Modern Appearance
neoStat Flush Mounting Mounting Type neoAir Surface/Desk Stand Flush mounting
The neoStat and neoAir have Modern Slimline Appearance been designed to compliment The home neoStat thermostat series any décor. is flush mounting, resulting in a depth of only 15mm after installation.
Temperature Range Temperature Range 05-35°C 05-35°C 41-95°F 41-95°F Lock Facility Lock Facility Yes - All models Yes - All models Indication Type Indication Type LCD with Back Light LCD with Blue Back Light Dimensions Dimensions neoStat 85x85x15mm (L,H,D) 85x85x40mm (L,H,D) neoAir 85x85x26mm (15mm Installed) E.U. Back Box E.U. Back Box neoStat Only
neoStat Wireless Thermostats neoStat
Heat or Timer Option The neoStat has been Heat or Timer Option designed to work as a The neoStat can be setup thermostat or timer, selectable to software. work in either Heat orcan be in The neoAir Timer mode,asso is perfect for set to work a thermostat, controlling heatingmodel zones or timer or combined timer zones such as towel rails that offers heating and timer and hot–water. The setup control perfect forquick controlling menu enables the installer heating and hot water fromor to select between ahome singleowner device. Flexible the two modes, and by programming means reduced incorporating the SKU’s for stockists. two modes into one product means one Easy Navigation less SKU for stockists. The neoStat/neoAir series Easy an Navigation offer easy to navigate The neoStat series offers an programming system, easy to navigate programming providing all of the options system,the providing of the across bottom all of the options across the bottom of back lit display. the blue back lit display.
Energy Saving Optimum Start Calculates the amount of heat Savingto Optimum upEnergy time required ensure Start Calculates amount heat your home isthe warm whenof you up time required to ensure wake and return home. This your home is warm when you is automatically optimised wake and the return home. This throughout year to save is automatically optimised you money. throughout the year to save you Wireless money.Networking neoStat and neoAir communicate WirelesstoNetworking wirelessly the neoHub to offer Although heating signal is a reliable andthe scalable network hard wired, the communication system. The mains powered data isautomatically sent wirelessly via our neoStat repeats the mesh network to the neoHub. data signal from other neoStat/ Our Neo network been neoAir in the home. Ifhas there are offer a reliable and nodesigned neoStat’sto installed, the neoAir scaleable network system, offering communicates directly with the controland of up to 32 neoStats neoHub so the neoPlug or on onecan network. The will Boost be used toneoHub extend the automatically distance. route the data communication around your home ensuring range Soft TouchanOperation is never issue. Modern touch sensitive Soft TouchaOperation keys provide clean smooth Modernadding touch sensitive interface, further to keys providefeel a clean the premium of thesmooth interface, adding further to the neoStat series. premium feel of the neoStat series.
Temperature Hold Facility Allows you to hold a set Temperature Facility temperature for aHold specific Allows- ideal you toforhold a set duration parties. temperature for a specific After which, the thermostat - ideal for parties. willduration revert back to the After which, the thermostat programmed setting. will revert back to the programmed setting. Battery Model The neoAir is powered by 4 forand Newprovides Build & AAAPerfect batteries Retrofit a totally wire free solution. the neoStat is mains TheAs neoAir communicates it is and perfect for new withpowered, the UH8-RF homesReceivers and for retrofitting RF Switch and can to existingtoproperties as to there be paired the neoHub are no requirements provide App Control. for CAT5 Data cable and you don’t need to worry about replacing batteries either!
Remote Sensing neoStat can be used with a remote air and remote floor sensor, whereas the neoAir has one remote sensor connection that can be used for remote air or floor temperature monitoring.
20 16
FEATURES
STANDARD MODELS
ELECTRIC FLOOR MODEL
BATTERY MODEL
neoStat
neoStat-hw
neoStat-e
Thermostat Mode
Y
Y
Y
Y
Timer Mode
Y
Y
Y
Y
Heating & Timer Mode
N
N
N
Y
05-35 °C 41-95 °F
N/A
05-35 °C 41-95 °F
05-35 °C 41-95 °F
Temperature Range
neoAir
Back Lit Screen
Y
Y
Y
Y
Non-Programmable Mode
Y
N
Y
Y
5/2 Day Programming Mode
Y
Y
Y
Y
7 Day Programming Mode
Y
Y
Y
Y
24 Hour Programming Mode
Y
Y
Y
Y
Number of Heating Levels
4
N/A
4
4
Optimum Start
Y
N
Y
Y
Number of HW Times
0
4
0
4
Holiday Function
Y
Y
Y
Y
Temperature Hold Function
Y
N
Y
Y
Temperature Override
Y
N
Y
Y
Temperature Override Limit
Y
N
Y
Y
Frost Protection
Y
N
Y
Y
App Control
Y
Y
Y
Y
°C / °F Option
Y
N
Y
Y
Remote Air Sensor Connection
Y
N
Y
Y
Built In Air Sensor
Y
N
Y
Y
Floor Sensing Mode
Y
N
Y
Y
Floor Sensor Included
N
N
Y
N
3A
3A
16A +/-
N/A
+/- 1°C
N/A
1°C +/-
+/- 1°C
Max Switching Current Accuracy Adjustable Switching Differential
+/- 1-3°C
N/A
1-3°C
+/- 1-3°C
Supply
230VAC
230VAC
230VAC
4 x AAA
Output
Volt Free Contact
Changeover
230VAC
N/A
85x85x15mm (L,H,D)
85x85x26mm (L,H,D)
N
Y
Installed Dimensions
85x85x15mm (L,H,D)
Wireless Switching to UH8-RF / RF Switch
N
N
Available In Three Stunning Colours
neoStat - Glacier White
neoAir - Glacier White
Thimble Sensor
Remote Sensor Probe
Part Ref: Heatmiser Thimble Sensor The Heatmiser Thimble sensor is ideal for discrete temperature monitoring and is compatible with all Heatmiser Thermostats with a remote sensor connection.
Part Ref: Heatmiser MISC103 This remote sensor probe can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Stylish Thermostats For Modern Living
21
Base Level Heating & Radiator System Our base level water underfloor heating system uses our UH8, 8 Zone wiring centre. With the flush mount set back thermostats and 4 zone touchscreen time clock, this creates a simple, yet cost effective solution.
Headline Information
Key Features Set Back Function
Connections for 8 x Zone outputs (suitable for 230v actuators) 230v Output for UFH Pump & Valve Control Volt Free Boiler Enable
Component Dimensions Time Clock 110x100x17mm (L,H,D) Set Back Thermostat 86 x 86 x 19mm (L,H,D) Wiring Centre 384 x 148 x 60mm (L,H,D)
Our base level heating system offers simple but effective control of up to eight zones*. The UH8 wiring centre is the hub of this system and is designed to work with our four channel 230v Time Clock (TM4) and 230v Set Back Thermostat (DS-SB). On board the UH8 are two heating time channels. Each zone allows you to specify which time channel it should follow. Two additional time channel connections are provided for hot water control or other auxiliary devices. * Additional zones can be controlled with the use of a second UH8.
The set back function is a simple way of reducing temperature when the heating is timed to be according to the time clock controlling the system. temperature set on the dial during the timed period and will automatically reduce the set temperature
DIN Rail Mounting The UH8 wiring centre can be DIN Rail Mounted for simple, easy installation.
Providing Wiring centre, controlling up to 8 zones 4 Zone Master Time Clock 230v Set Back Thermostat in each room
Neon Indication
Radiator Zone Control
Neon indicators are provided on the UH8 allowing you to see the power, valve, boiler and zone status without the need to remove the cover.
A simple slide switch makes zone eight suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the
Simple Connectivity
230v Models Are designed to work with our UH8 wiring centre and dial thermostat with set back function,
Product List 8 Zone Wiring Centre Part Ref: Heatmiser UH8 (See page 31) 4 Zone Time Clock Part Ref: Heatmiser TM4 (See page 09) Set Back Thermostat Part Ref: Heatmiser DS-SB (See page 03)
The UH8 allows the connection of up to eight 230v room thermostats. On demand from any zone, a 230v output is provided to switch the pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Base Level Water Underfloor Heating & Radiator System
22
neoStat (Timer) TM4 Time Clock NOT NOT USED USED
L
N
A1
A2
NO
UFH
POWER SUPPLY 3A 230V
L
N
UFH
UFH
DS-SB STAT
DS-SB STAT
L
CH1 CH2 CH3 CH4
N SL
L
L
N SL
HEATING L
L N
L N
SL
L N
L N
1
1
2
3 4 1 2 TIME CLOCK
1
SL
N
DS-SB STAT
L
SL
L
N SL
1
DS-SB STAT
A2
R T+ R T-
L N
SL
L N
SL
2
A1
N
A2
L N
SL
L N 1
2
A1
N
R T+ R T-
L N
SL
L N
SL
L
SL
N SL
L
L N
2
3 4ZONE1 1
TIME CLOCK
N
R T+ R T-
(Connected to Zone 2)
UFH
L
R T+ R T-
MAINS SUPPLY
DS-SB Thermostat neoStat (Connected to Channel 2)
(Connected to Zone 1)
BOILERN
ENABLE DS-SB STAT
TM4-TS TIMER
UH8
DS-SB Thermostat neoStat (Connected to Channel 1)
(4 Independant Channels) CYLINDER HOT WATER THERMOSTAT VALVE NC MOTOR C
230VAC
L N
SL
L N
SL
2
1
SL
2
L N
SL
L N 1
SL
2
L N
SL
L N 1
1
ZONE 2 1 2 ZONE 3 1 2 ZONE 4 1 2 ZONE 5 1 2 ZONE 6 1 2 ZONE 7 1 2 ZONE 8 1 2 ZONE1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
NO
1
ZONE 2 2
SL
L
E
N
1
ZONE 3 2
SL
L
N
E
1
YES
ZONE 4 2
SL
L
N
E
SL
L
E
N
1
L
YES
ZONE 5 2
1
ZONE 6 2
SL
L
N
E
1
ZONE 7 2
SL
L
E
N N SL L
ZONE 8
1
N
2
SL
L
N
E
2
1
SL
R1 R2
HEAT ENABLE LS
E
UFH PUMP
LR
L
E
N
MAINS UFH VALVE SUPPLY MAINS UFH PUMP E PUMP N SUPPLY L UFH GR OR L BOILER BOILER L
LS AND LR IS VOLT FREE
N L
L N
N L
A1
A2 UFH
RAD
ZONE 1 L NL
L
N
N
L N
LZONE L N 2
ZONE 1
N L
L N
N
L N
N N4 LZONE
ZONE 3L
ZONE 2
N L
ZONE 4
ZONE 3
ZONE 2
N ZONE 1
ZONE 4
ZONE 3
L N L
L 5L ZONE
ZONE 5
N L N
ZONE 6
ZONE 5
NZONE N 6
L L 7N ZONE
ZONE 6
N
L
ZONE 8 ZONE 7 ZONE 8 L
N
L
N L
N
N
ZONE 8
ZONE 7 N
L
L
N
ZONE 8 TYPE
ZONE 1 N
FOUR CORE AND EARTH 1.5 CABLE
NO
UH3 UH3 E
SL
2
2
FUSE
L
R T+ R T-
SL
L N
SL
2
FUSE
Heating5AorFUSE Manifold MAINS Valve TIME CLOCK Heating or Manifold E E N 1 2 L Valve N L
N SL
L
N
L
L
N
N
DS-SB Thermostat (ConnectedneoStat to Channel 1) (Connected to Zone 8)
LN
230V AC Supply
230V Supply BOILER(Via Heating/Hot WaterAC System Fused Spur) ENABLE (Via Heating/Hot Water System Fused Spur) UFH VALVE
Boiler Boiler (Heating Enable Terminals)
LN
LN
LN
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
RADIATOR VALVE
Zone 8 Isolation Switch Zone 8 Isolation Switch VALVE WITH ENDSWITCH
PLEASE ADD LINK TO GR AND OR IF VALVE NOT FITTED
UFH PUMP
Boiler Radiator Zone Valve To Boiler Radiator Zone Valve EnableTo Enable
If set to YES, Zone 8 enables the Boiler Pump and Valve. If set to YES,toZone 8 enables the Boiler Pump and Valve. If set NO Zone 8 is isolated. If set to NO Zone 8 is isolated.
(Heating Enable Terminals) PL SL
PL SL
UFM UNDER FLOOR MANIFOLD PL PERMANENT LIVE PL PERMANENT SL SWITCH LIVE LIVE SL SWITCH LIVE LIVE TIMER LIVE
This equipment should be installed by an appropiately qualified/registered electrician. Fully read the instructions for proper wiring before applying power. The warranty does not cover damage from improper wiring or installation.
UFH Manifold UFH Manifold (Using 230v Actuators)
SWITCH LIVE NEUTRAL
(Using 230v Actuators)
EARTH END SWITCH AND BOILER ENABLE
Standard Products
88Zone ZoneWiring WiringCentre Centre 8 Zone Centre Part Ref: Heatmiser UH3 Part Ref:Wiring Heatmiser UH3 Part Ref: Heatmiser UH8
neoStat (Timer Mode) neoStat (Heat Mode) 4 Zone Time ClockPart Ref: neoStat Part Ref: neoStat Part Ref: Heatmiser TM4-TS
Stylish Thermostats For Modern Living
neoHub Back Thermostat SetSet Back Thermostat Part Ref: neoHub Part Ref: Heatmiser DS-SB Part Ref: Heatmiser DS-SB
23
Wireless Multi Zone App Control System Designed to be easy to install and operate Our multi zone wireless system with app control provides a complete solution for those with underfloor or radiators. The neoAir communicates wirelessly with the UH8-RF 8 Zone receiver and the neoHub to offer local and remote control via the neoApp.
Headline Information
Key Features
Providing
Simple Pairing Process
App Control
Wiring centre, controlling up to eight zones Wireless thermostat in each room
Up to 99 UH8-RF’s can be used within the same building, allowing control of up to a possible 792 zones. Each UH8-RF has an address setting clearly marked on the PCB. This address, along with the relevant zone number is congured in the thermostat and that’s it – a simple to install, setup and operate system.
When paired to a neoHub, the neoAir can be controlled from the neoApp – available on WindowsPhone, iOS and Android. Up to 32 neoAir can be paired to a single neoHub. For systems with more zones, additional neoHubs would be required.
DIN Rail Mounting
Hot Water Control
The UH8-RF wiring centre can be DIN Rail Mounted for simple, easy installation.
Product List 8 Zone Wiring Centre (expandable up to 792 Zones) Part Ref: UH8-RF (See page 30) Compatible wireless thermostats Example: neoAir Wireless Thermostat Part Ref: neoAir
The UH8-RF also takes care of the hot water. A volt free changeover output is provided for the cylinder stat/hot water valve. The neoAir provides time and temperature control of the heating and time control of the hot water.
Optional Products
Pump & Boiler Delay
External Aerial Part Ref: EA1
The UH8-RF offers an optional pump and boiler delay feature. This 2 minute delay is designed to prevent boilers from going to lockout by giving the zone actuators time to open.
Wireless Repeater Part Ref: Boost/neoPlug Internet Gateway Part Ref: neoHub
Radiator or Underfloor A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump and underfloor heating valve where there is a call for heat.
Wireless Water Underfloor Heating & Radiator System
neoPlug Compatible The neoPlug can be used to extend the wireless coverage between the thermostat and neoHub and also the switching receiver. In addition, the power outlet can be controlled from the neoApp.
HomeKit Compatible HomeKit and the Home app in iOS 10 lets you securely control any "Works with Apple HomeKit” accessory. You can also organize your accessories by room, manage multiple accessories at the same time, control your home with Siri, and more.
24
neoStat (Timer) 230VAC
NOT NOT USED USED
L
CYLINDER THERMOSTAT
N
A1
A2
HOT WATER VALVE
neoStat
neoStat
(Connected to Zone 1)
(Connected to Zone 2)
NC MOTOR
C NO
POWER SUPPLY 3A 230V
BOILER ENABLE
L
UH8-RF
A1
N
L
A1
N
A2
A2
neoAir
neoAir
neoAir
neoAir
neoAir
neoAir
neoAir
(Wireless Thermostat)
(Wireless Thermostat)
(Wireless Thermostat)
(Wireless Thermostat)
(Wireless Thermostat)
(Wireless Thermostat)
(Wireless Thermostat)
Underfloor Heating
Radiators 1
TIME CLOCK
2
1
ZONE1
1
2
ZONE 2
L N
SL
2
1
ZONE 3
L N
SL
2
1
ZONE 4
L N
SL
2
1
ZONE 5
L N
SL
2
1
ZONE 6
L N
SL
2
ZONE 7
UH3 Heating or Manifold Valve
ZONE 8
FUSE 5A
800MA
N
MAINS SUPPLY C
MA IN S IN
NO NC
B O IL E R
UFH PUMP BOILER
L
C
NO NC
L
L
N H/W
L
L
N
N
N ZONE 1
ZONE 1
N L
L
N
L ZONE 2
ZONE 2
N
N
L
L
L
ZONE 4
ZONE 3 N
N L ZONE 3
N
L
L N
N
L
N
ZONE 5 N
ZONE 4
ZONE 6 L
L
N
1
(UNITS)
ZONE 7
N
ZONE 5
L
N
YES
10
(TENS)
BOILER RF TEST CREEPAGE ENABLE PUMP DELAY ENABLE
E
2
BOILER RF TEST CREEPAGE ENABLE PUMP DELAY NO ENABLE
FUSE
L
SL
1
A2
L
A1
BOILER PAIRING
NO 1 2 3 4 5 6 7 8 9 10 1112
FUSE 2A
3 4
L N
SL
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8 H/W P UMP B OIL ER
2
L N
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8 H/W PUMP BOILER
1
SL
NO
L N
1 2 3 4 5
L N
ZONE 8 L
N
L ZONE 6
N
N
L
L
N
N
ZONE 7
L
L
N
N
L
ZONE 8
E
N
PUMP
L
E
N
VALVE
neoStat
(Connected to Zone 8)
MAINS SUPPLY 3 AMP
230V AC Supply
HW STAT
(Via Heating/Hot Water System Fused Spur)
Radiator Zone Valve LN
LN
ZONE 1
ZONE 2
LN
BOILER ENABLE
ACTUATOR 230V
Boiler
ACTUATOR 230V
LN
LN
ZONE 3
ZONE 5
Z O NE 4
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
LN
Z O NE 6
ACTUATOR 230V
LN
PL SL
Zone 8 Isolation Switch
If set to YES, Zone 8 enables the Boiler Pump and Valve. If set to NO Zone 8 is isolated.
RADIATOR VALVE
(Heating Enable Terminals)
HOT WATER VALVE
PL SL
UFH PUMP
ZONE 7
ACTUATOR 230V
VALVE WITH ENDSWITCH
UFH VALVE
PERMANENT LIVE SWITCH LIVE
UFH Manifold (Using 230v Actuators)
UFM UNDER FLOOR MANIFOLD
StandardProducts Products Fully read the instructions for proper wiring before applying power. Standard
This equipment should be installed by an appropriately qualified/ registered electrician.
LIVE
NEUTRAL
The warranty does not cover damage from improper wiring or installation.
EARTH END SWITCH AND BOILER ENABLE
8 Zone Wiring Centre 8 Zone Wiring Centre Heatmiser UH3 PartPart Ref:Ref: Heatmiser UH8-RF
neoStat (Heat Mode) neoAir Part Ref: neoStat Glacier White
Stylish Thermostats For Modern Living
neoStat (Timer Mode) Optional Part Stand Ref: neoStat Desk
neoHub neoHub Part Ref: Part Ref:neoHub neoHub
25
To Boiler Enable
Low Voltage Network Control Solution Total control of your home heating system Use the Heatmiser Touchpad for instant access to your heating system.
Headline Information
Key Features
Providing
Complete Network Control
Wiring Centre, controlling up to 8 zones 12v Programmable Thermostats in each room Optional Central Control
Product List 8 Zone Wiring Centre (expandable up to 32 Zones) Part Ref: Heatmiser UH8-N (See page 30) Slimline Thermostat Part Ref: Heatmiser Slimline-N (See page 04-05 for complete slimline range) TouchScreen Thermostat Part Ref: Heatmiser Touch-N (See page 06-07 for complete TouchScreen range)
Cable Type Belden 9538 or Cat5(e)-ftp
Optional Products
32 zones. What’s more, it provides the ability to control the entire heating system centrally, with the TouchPad. Designed to be used in conjunction with our Slimline or TouchScreen 12v Network Thermostats, our deluxe heating system really is a complete package for those wanting superior control of their heating system.
Simple Connectivity The UH8-N allows the connection of up to eight 12v Network Thermostats. On demand from any zone, a 230v output is provided to switch pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Hot Water Control
Radiator Zone Control
The UH8-N also takes care of the hot water. A cylinder thermostat connection and a 230v hot water valve output are provided. Controlling the hot water from the UH8-N makes sense, not only because it simplifies the wiring, but also because it enables you to control your hot water centrally from the TouchPad and remotely from the NetMonitor.
A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable
Optional Products Central Control
Central Control Part Ref: Heatmiser TouchPad (See page 28-29 for details)
Low Voltage Network Control Solution
26
neoStat (Timer) 230VAC
L
N
A1
A2
HOT WATER VALVE MOTOR
NO
-
UFH
UFH
BOILER ENABLE
TOUCHPAD +
SLIMLINE-N
+ A1 A2
Y B
-
Y B
+ A1 A2
L N 1
2
3 4
TIME CLOCK
TOUCHPAD Y
-
MAINS
Heating or Manifold Valve N E
B
+ A1 A2
ZONE 1
5A FUSE
L
N
MAINS SUPPLY
MAINS SUPPLY
L
L
L
230V AC Supply (Via Heating/Hot Water System Fused Spur)
N
N
+ A1 A2
L
N
N
L
L
N
ZONE 1 L
N
LN
L
-
N
L
N
N
ZONE 4
ZONE 3 L
SL
1
LN
L N
L
ZONE 2
ZONE 3
ZONE 4
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
1
ZONE 7
ZONE 8
ZONE 5
ZONE 5 L
2
N
ZONE 6
Y B
+ A1 A2
L
ZONE 6
L
N
YES
N
L
ZONE 7
ZONE 7
Y B
+ A1 A2
ZONE 7 L
N
N
-
L
N
ZONE 8
Y B
+ A1 A2
HOT WATER
ZONE 8 L
N
L
E
N
N
-
UFH A2 VALVE
LL EA1 N
H WATER
Y B B1 B2
UFH PUMP L
E
N
neoStat
UFH PUMP
Radiator Zone Valve HOT WATER VALVE VALVE WITH ENDSWITCH
UHF VALVE
Zone 8 Isolation Switch
If set to YES, Zone 8 enables the Boiler Pump and Valve. If set to NO Zone 8 is isolated.
PL SL
PERMANENT LIVE SWITCH LIVE
UFH Manifold (Using 230v Actuators)
StandardProducts Products Standard
Slimline ThermostatneoStat (Timer Mode) neoStat (Heat Mode) Part Ref: Heatmiser Slimline-N Part Ref: neoStat Part Ref: neoStat
Stylish Thermostats For Modern Living
LS E LR
(Connected to Zone 8)
Boiler
8 Zone Wiring Centre 8 Zone Wiring Centre PartHeatmiser Ref: Heatmiser Part Ref: UH3UH8-N
S
HEAT ENABLE
(Heating Enable Terminals)
PL SL
S
ZONE 8
HOT WATER L N STAT
RADIATOR VALVE VALVE WITH ENDSWITCH BOILER ENABLE
-
NO
ZONE 6
N
ZONE 5
-
- B1 B2
CABLE TYPE SL BELDEN 9538 2 CAT-5E( FTP )
L N
SL
1
+ A1 A2
N
ZONE 1
L N
2
ZONE 6
Y B
UH3
L
ZONE 2
L N
SL
2
ZONE 4
N
+ A1 A2
ZONE 5
+ A1 A2
A2
Y B
1
Yellow & Blue wires from thermostat
SLIMLINE-N HW
A1
N
ZONE 4
Y B
ZONE 3
N
LN
2
ZONE 4
-
-
L N
SL
1
ZONE 3
Y B
UFH PUMP L
L N
2
ZONE 3
ZONE 2
N
+ A1 A2
RADIATORS
UH8-N
L
SLIMLINE-N
Y B
SL
1
2
ZONE 2
-
-
L N
SL
1
+ A1 A2
BOILER
LN
+ A1 A2
L N
ZONE1
A1
A2 N SLIMLINE-N
Y B
2
UFH
L
ZONE 2
-FUSEY B
L
-
SL
1
ZONE 1 L
UFH
SLIMLINE-N
L N
+
neoStat (Connected to Zone 2)
NC C
POWER SUPPLY 3A 230V
neoStat (Connected to Zone 1)
ZONE 8 TYP E
NOT NOT USED USED
CYLINDER THERMOSTAT
TouchScreenneoHub Thermostat Part Ref: Heatmiser Touch-N Part Ref: neoHub
27
To Boiler Enable
Mains Voltage Network System
Network control of your mains wired heating system from your Smartphone and Tablet
Our Mains Wired Neo Network is perfect for new build and retrofit markets. Don’t worry about installing CAT5 cabling or WiFi Network coverage around the home, our Neo Network System offers a simple to install system that is expandable.
Headline Information
Key Features
Connections for
Neo Network
8 x Zone outputs (suitable for 230v actuators) 230v Output for UHF Pump and Valve control Volt free Boiler Enable
The Neo Network System is designed to provide reliable communication of the thermostat data whilst at the same time providing an extended communication range. Each neoStat thermostat acts as a repeater on the network, helping to eliminate range issues which are common on standard RF systems.
Component Dimensions UH8 Wiring Center 384 x 148 x 60mm (L,H,D)
Providing Wiring centre, controlling up to 8 zones 8 Neo Mains Network Thermostats
Product List 8 Zone wiring centre Part ref: Heatmiser UH8 (See page 31) 7 x neoStat in Heating mode 1 x neoStat in Timer mode (See page 16-17) NeoHub
Optional Products Heatmiser Boost/neoPlug has been designed to extend the range of your Neo System, ensuring the network can reach every part of your home.
Mains Voltage Network System
Easy Upgrade Customers with existing 230v thermostats can upgrade to the Neo Network System and take control of their system from anywhere. The neoHub gateway connects the neoStats to the internet for access via a Smartphone or Tablet both in the home and remotely from anywhere in the world.
Simple Conectivity The UH8 allows the connection of up to eight 230v thermostats. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Radiator Zone Control
Neon Indication Neon indicators are provided on the UH8 allowing you to see the power, valve, boiler and zone status without the need to remove the cover
neoStat Thermostat Flexibility The neoStat can be set to operate in heating or timer mode, allowing the installer to select on installation if the thermostat will be used to control a heating zone or a timed appliance, such as the hot water or perhaps a towel rail.
DIN Rail Mounting The UH8 wiring centre can be DIN Rail Mounted for simple, easy installation.
neoPlug Compatible The neoPlug can be used to extend the wireless coverage between the thermostat and neoHub and also the switching receiver. In addition, the power outlet can be controlled from the neoApp.
HomeKit Compatible HomeKit and the Home app in iOS 10 lets you securely control any "Works with Apple HomeKit” accessory. You can also organize your accessories by room, manage multiple accessories at the same time, control your home with Siri, and more.
A simple slide switch make’s zone eight suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler.
28
neoStat (Timer) 230VAC
CYLINDER THERMOSTAT
UFM UNDER FLOOR MANIFOLD NOT NOT USED USED
LIVE
L
N
A1
A2
UH8
HOT WATER VALVE
neoStat
neoStat
(Connected to Zone 1)
(Connected to Zone 2)
NC MOTOR
C
TIMER LIVE NO
SWITCH LIVE
UFH
UFH
UFH
UFH
HEATING
NEO STAT
NEO STAT
L A1 NEON STAT A2
NEO STAT
NEUTRAL POWER SUPPLY 3A 230V
EARTH
BOILER ENABLE
END SWITCH AND BOILER ENABLE
N A1 A2 - R T 1 R T 2
L
L N 2
3 4
L
L N
L N
SL
1
TIME CLOCK
MAINS SUPPLY
N A1 A2 - R T 1 R T 2
L N 1
THREE CORE AND EARTH 1.5 CABLE
L
2
SL
1
ZONE1
N A1 A2 - R T 1 R T 2
ZONE 2
L N
SL
1
2
L
2
ZONE 3
2
A2
2
L N
SL
1
ZONE 5
2
ZONE 6
L N
SL
1
2
ZONE 7
NO
L
2
E
E
2
SL
L
ZONE 2 N 1
E
2
SL
L
ZONE 3 N 1
E
2
SL
L
E
N
YES
ZONE 4 N 1
2
SL
L
E
ZONE 5 N 1
2
SL
A2
L
L
E
ZONE 6 N 1
2
SL
L
E
ZONE 7 1 N
2
SL
L
A1
UFH
ZONE 8 N 1
E
2
SL
MAINS
HEAT ENABLE LS
L
ZONE 1 N 1
UFH PUMP UFH SUPPLY UFH VALVE PUMP BOILER GR OR L E N L E
LR
L
N
L
RAD
N
L
N
N
ZONE 1
L
ZONE 1 N N L
L
N
ZONE 2 L
L
N
ZONE 3
ZONE 2
ZONE 4
ZONE 3 N N
L
L
L N
L
L
N
ZONE 5 N
ZONE 4
ZONE 6N
L
L
N
ZONE 7
N
ZONE 6
ZONE 5 L
ZONE 8 N N L
L
L
L
N
ZONE 8
ZONE 7 N
L
L
N
ZONE 8 TYP E
5A FUSE
TIME CLOCK E N 1
2
ZONE 8
UH3 MAINS N L E
SL
1
FUSE
Heating or Manifold Valve
N A1 A2 - R T 1 R T 2
L
L N
SL
1
ZONE 4
NEO STAT
A1
N A1 A2 - R T 1 R T 2
L N
SL
1
L N
N
L
L
N
N
N
IN OUT IS VOLT FREE
neoStat
(Connected to Zone 8)
230V AC Supply
LN
LN
Radiator Zone Valve LN
LN
(Via Heating/Hot Water System Fused Spur)
BOILER ENABLE
UFH VALVE
Boiler
(Heating Enable Terminals)
UFH PUMP
ZONE 1
ACTUATOR 230V PLEASE ADD LINK TO GR AND OR IF VALVE IS NOT FITTED
ZONE 2
ZONE 3
ZONE 4
ACTUATOR 230V
ACTUATOR 230V
ACTUATOR 230V
RADIATOR VALVE
Zone 8 Isolation Switch
WITHand Valve. If set to YES, Zone 8 enables theVALVE Boiler Pump If set to NO Zone 8ENDSWITCH is isolated.
PL SL PL SL
PERMANENT LIVE SWITCH LIVE
This Equipment should be installed by an appropiately qualified/ registered electrician. Fully read the instructions for proper wiring before applying power. Manifold The warranty does not cover damage from improperUFH wiring or installation. (Using 230v Actuators)
StandardProducts Products Standard
8 Zone Wiring Centre 8 Zone Wiring Centre PartHeatmiser Ref: Heatmiser Part Ref: UH8 UH3
neoStat (Timer Mode) neoStat (Heat Mode) neoStat (Heat Mode) neoStat (Timer Mode) neoHub Part Ref: neoStat Part Ref: neoStat Part Ref: neoStat Part Ref: neoStat Part Ref: neoHub
Stylish Thermostats For Modern Living
NeoneoHub Central Control PartPart Ref:Ref: Heatmiser neoHubneoUltra
29
To Boiler Enable
Central CentralControl Control Designed Designed to give to give Central Central Control Control within within youryour home home Designed Designed to workto with work ourwith 12vour Network 12v Network Thermostats, Thermostats, the Heatmiser the Heatmiser Touchpad Touchpad provides provides central central control control of your of home yourheating home heating system.system.
Headline Headline Information Information
Key Key Features Features
CentralCentral ControlControl
Home and Home Away and Away
HolidayHoliday
Temperature Temperature Hold Hold
Part Ref: Part Heatmiser Ref: Heatmiser TouchPadTouchPad
This feature Thisgives feature yougives a simple you a simple
Up to 32 Up rooms to 32 can rooms be can be controlled controlled from thefrom full colour the full colour TFT Display TFTmeaning Display meaning that that walking around walkingeach around room each to room to turn up or turn down up or thedown heating the heating is a thingisofa the thing past. of the past.
system whilst system you whilst are away. you are away. On your return, On yourpressing return, pressing the the Home button Homewill button re-enable will re-enable the the system. Ideal system. when Ideal you when haveyou a have a holiday home holiday and home are not andsure are not sure when you when will return. you will return.
Use the holiday Use thefeature holidaytofeature to put the heating put theinto heating frostinto frost mode whilst mode you whilst are away. you are away. At the end Atof the the end holiday, of the holiday, each room each willroom revert will back revert back to the programmed to the programmed time, time, ensuringensuring your home your is warm home is warm on your return. on your return.
Use this function Use this function to hold to hold a desiredatemperature desired temperature for a fixed forperiod, a fixedideal period, ideal
DisplayDisplay TouchScreen TouchScreen 4.3” TFT 4.3” TFT Colour LCD Colour LCD
NumberNumber Of Zones Of Zones 32 (Max) 32 (Max)
Titles Titles
for unexpected for unexpected activities.activities. Apply to Apply a single toor a single or multiple multiple rooms. rooms.
Copy Facility Copy Facility
Auto GMT Auto Correction GMT Correction
Gives theGives ability the toability store ato store a set of comfort set of levels comfort forlevels a for a group ofgroup rooms.ofThis rooms. setting This setting can be applied can beas applied and when as and when required,required, for example for example at the at the start of astart new of shift. a new shift.
Save timeSave - copy time comfort - copy comfort levels between levels between rooms. rooms.
Automatically Automatically adjusts adjusts the clocks the in clocks all of the in all of the thermostats thermostats at the start at the of start of summer summer and winter and time. winter time.
HistoryHistory
USB Export USB Export
Key Lock Key Lock
The TouchPad The TouchPad will storewill hours store hours of temperature of temperature history. history.
The temperature The temperature log can log can be exported be exported via the USB via the USB connection. connection.
Lock each Lock thermostat each thermostat to to prevent misuse. prevent misuse.
Hot Water HotBoost Water Boost
Quick View Quick View
Auto Time Auto Sync Time Sync
Use the hot Usewater the hot boost water to boost to quickly override quickly override the hot water the hot water settings. settings.
See at a glance See at athe glance the current thermostat current thermostat status status throughout throughout your building. your building.
Syncronises Syncronises all of theall of the thermostat thermostat clocks onclocks the on the network.network.
Give eachGive room each a title room a title
Passcode Passcode ProtectProtect When enabled, When enabled, the user must the user must enter a passcode enter a passcode in order to in order to access the access system. the system.
Central Control
30
Intuitive User Interface
Central Control
Stylish Thermostats For Modern Living
Temperature Hold
Home & Away
31
Central Wiring Switch Boxes Multi-zone wiring centres - Designed to make installation simple Our central wiring switch boxes have been designed to simplify the wiring process. Using our wiring centres in your application means that the actuator, boiler and pump connections are wired from a single point.
12v 8 Zone Wiring Centre
230v 4 Zone Wiring Centre
Part Ref: Heatmiser UH8-N
Part Ref: Heatmiser UH4
The UH8-N is designed to be used in conjunction with our 12v network thermostats. The UH8-N provides central switching and is therefore ideally situated next to the underfloor heating manifold. Eight zones can be controlled as well as providing an output for a hot water cylinder. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to six actuators can be connected to each zone. An option is provided to turn zone 8 into a radiator zone. In this mode the underfloor heating pump, valve and boiler are not enabled when there is a call for heat from zone 8.
The UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to four zone actuators as well as providing an output for a hot water cylinder and the heating system boiler and pump. When used for underfloor heating, an option is available to use zone 4 for conventional radiator control. Up to six actuators can be connected to each zone.
MAINS SUPPLY
230v STAT
230v STAT
230v STAT
230v STAT
HW Time Clock
RADS
UFH
POWER
TO BOILER
Heatmiser UH8-N
Central Wiring Switch Boxes
MANIFOLD PUMP OR VALVE
HEAT
HEAT
ZONE 1
ZONE 2
ZONE 3
ZONE 4
LL NN
LL NN
LL NN
LL NN
SUPPLY TO ACTUATORS
SUPPLY TO ACTUATORS
SUPPLY TO ACTUATORS
SUPPLY TO ACTUATORS
HOT WATER
HW VALVE
Heatmiser UH4
32
Central CentralWiring WiringSwitch SwitchBoxes Boxes
Multi-zone ible Wiring Centreswiring Multi-zone wiringcentres centres- Designed - Designedtotomake makeinstallation installationsimple simple
Our central wiring switch have been designed to to simplify wiring process. Using ourour wiring centres in your application means that Our central wiring switch boxes have been designed simplify the wiring process. Using wiring centres in application means that work with our 230v thermostats. The newboxes UH4 is ideal for smaller systems, up tothe four zones Our central wiring switch boxes have been designed to simplify the wiring process. Using our wiring centres in your your application means that thethe actuator, boiler and pump connections areare wired from a single point. the actuator, boiler and pump connections are wired from single point. actuator, boiler and pump connections wired from aa single point.
stats.
12v Thermostat Centre 12v Network Thermostat Wiring Centre 230v 8Network Zone Wiring Centre Wiring 12v Network Thermostat Wiring Centre
Wireless 230v 8 Zone Wiring Centre Wireless 230v 8 Zone Zone Wiring Centre Wireless 230v 8 Wiring Centre
Part Ref:Ref: Heatmiser UH1 Part Part Ref: UH8 UH1 PartHeatmiser Ref: Heatmiser Heatmiser UH1
Part Ref: Heatmiser UH8-RF Part Part Ref: Ref: Heatmiser Heatmiser UH8-RF UH8-RF
The UH1 is designed to be used in conjunction with ourour 12v12v network TheThe UH8-RF is designed to be used in conjunction with ourour compatible The UH1 is designed designed towith be used in conjunction conjunction with network UH8-RF is designed designed to be be used in conjunction conjunction with compatible UH8 The UH3 designed to work our four channel 230v time (TM4) and 230v Set back TheisUH1 is to be used in with ourclock 12v network The UH8-RF is to used in with our compatible thermostats. The UH1 provides central switching and is therefore ideally wireless thermostats. The UH8-RF provides central switching and is therefore thermostats. The UH1 provides central switching and is therefore ideally wireless thermostats. The UH8-RF provides central switching 230v Set back thermostat (DS-SB) but be equally could be used with any 230v thermostat (DS-SB) but could usedswitching with any 230v room thermostat. thermostats. The equally UH1 provides central and is therefore ideally Up to eightwireless thermostats. The UH8-RF provides central switching and and is is therefore therefore ideally situated next to the underfloor heating manifold. Eight zones can be be ideally situated next to the underfloor heating manifold. Eight zones room thermostat. Up to eight zones canOn beboard controlled fromare thetwo UH8. On board zones can be controlled from the UH3. the UH3 heating time channels, ideally each situated next to the underfloor heating manifold. Eight zones can can be well astwo providing an an output for for a hot water cylinder. OnOn demand from controlled as well as providing an an output for for hothot water control. OnOn demand as are well as providing providing output hot water cylinder. demand fromtime channel controlled as well well as providing providing output water control. demand theas UH8 heating channels, each zone allows you to specify which zone allows you to specifytime which timefor channel it should follow. Two additional as well as an output aa hot water cylinder. On demand from controlled as as an output for hot water control. On demand any zone, ait230v output is provided to switch thethe relevant zone actuators, from anyany zone, a 230v output is provided to switch thethe relevant zone any zone, 230v output is provided provided to switch switch relevant zone actuators, from zone, 230v output is provided provided to switch switch relevant zone time channel should follow. connections are for hot water control or other devices. On demand fromfrom anyany any zone, aaprovided 230v output is to the auxiliary relevant zone actuators, zone, aa 230v output is to the relevant zone actuators, underfloor heating pump andand valve. A volt freefree connection is actuators, underfloor heating pump valve. A volt connection actuators, underfloor heating pump and valve. A volt free connection is is boiler, making it compatible with almost all types of boilers. UpUp to six actuators supplied for for thethe boiler, making it compatible with almost all types of boilers. boiler, making it compatible with almost all types of boilers. to six actuators supplied boiler, making it compatible with almost all types of and valve. A making volt freeitconnection supplied forall the boiler, making Up it compatible with almost boiler, compatibleiswith almost types of boilers. to six actuators supplied for the boiler, making it compatible with almost all types of boilers. boilers. cancan be be connected to each zone. An An option is provided to turn zone 8 into a a UpUp to six six actuators cancan be connected to each zone. An An external aerial is available connected to each each zone. option is provided provided to turn turn zone 8 into into all types boilers. A simple slidezone. switch zone 8 suitable for controlling a aradiator zone. canofbe connected to Anmakes option is to zone 8 Up to to six actuators actuators can be be connected connected to to each each zone. zone. An external external aerial aerial is is available available for for useuse when the UH8-RF is being mounted in a metal cupboard or when thethe when the the UH8-RF UH8-RF is is being being mounted mounted in in aa metal metal cupboard cupboard or or when when for use when the notnot enabled when there is aiscall for for heat from zone 8. 8. wireless signal is restricted. A software option in the thermostat allows you to to enabled when there from wireless valve and to four actuators be connected not boiler. enabledUp when there is aa call callcan for heat heat from zone zoneto8.each zone. wireless signal signal is is restricted. restricted. A A software software option option in in the the thermostat thermostat allows allows you you to configure which zones are underfloor heating andand which zones are radiators. configure configure which which zones zones are are underfloor underfloor heating heating and which which zones zones are are radiators. radiators.
T TIME CLOCK THERMOSTAT
DIAL TYPE THERMOSTAT
DIAL TYPE THERMOSTAT
DIAL TYPE THERMOSTAT
TM4
DS-SB
DS-SB
DS-SB
NO YES
E4
MAINS SUPPLY
TO BOILER
UFH PUMP
VALVE
ZONE 1
ZONE 2
ZONE 8
UFH VALVE
SUPPLY TO ACTUATORS OR VALVES
SUPPLY TO ACTUATORS OR VALVES
SUPPLY TO ACTUATORS OR VALVES
Heatmiser UH1 Heatmiser UH1 Heatmiser UH1 Heatmiser UH1 Heatmiser UH1 Heatmiser UH1 Heatmiser UH3 Heatmiser UH8 Stylish Thermostats For Modern Living
Heatmiser UH8-RF Heatmiser UH1-W Heatmiser UH8-RF Heatmiser UH1-W Heatmiser UH8-RF Heatmiser UH1-W
UH1-W is not suitable for use in Australia New Zealand. UH8-RF is not suitable for useand in Australia. UH1-W is for New UH8-RF is for in UH1-W is not suitable for use in Australia and New Zealand. UH1-W is not not suitable suitable for use use in in Australia Australia and New Zealand. Zealand. UH8-RF is not not suitable suitable for use useand in Australia. Australia.
33
Accessories
A range of accessories compatible with the Heatmiser products.
Heatmiser neoPlug The Heatmiser neoPlug is a smart plug and wireless repeater for the RF and Neo Systems. Switching times can be programmed into the neoPlug or you can control the output manually via the neoPlug or from anywhere using the neoApp. The neoPlug is great for controlling lamps and because neoHub works with IFTTT, the neoPlug can turn on and off based on sunrise and sunset conditions.
Wireless Air Sensor The Wireless Air Sensor works with our Edge Thermostat Series to provide remote temperature monitoring or for those using in conjunction with the built in air sensor temperature averaging facility.
Floor Probe Thimble Sensor The Heatmiser Thimble Sensor is ideal for discreet temperature monitoring and is compatible with all Heatmiser Thermostats with a remote air sensor connection. This sensor includes a 3M cable that can be extended to 20M.
Mains Voltage Network System
The floor probe is supplied with all of our Electric floor heating thermostats but can also be used with selected other models to provide floor temperature limiting. This sensor includes a 3M cable that can be extended to 20M.
34
Wireless Door & Window Contact Switch
Heatmiser Boost
The Door/Window Switch works with the Edge Thermostats Series and provides an easy way to save energy. When paired with an Edge Thermostat, the heating will switch off whenever the door/ window is opened and a window icon will be displayed on the thermostat display in such cases.
The Heatmiser Boost is our surface mount 230v powered wireless repeater for the RF and Neo systems, designed to extend the communication distance between the thermostat and receiver.
neoStat/neoAir Wall Plate
Heatmiser neoAir Stand
The neoStat/neoAir wall plate is perfect for those looking to upgrade to Neo but not wishing to redecorate at this time. The Wall Plate is 110x100x6mm.
The neoAir Stand is perfect for those not wanting to install the neoAir on the wall. The neoAir Stand is perfectly balanced and angled to provide easy viewing of the thermostat display.
Stylish Thermostats For Modern Living
35
Stylish Thermostats For Modern Living
Heatmiser UK Ltd 8 & 9 Hurstwood Court, Mercer Way Shadsworth Business Park, Blackburn Lancashire. BB1 2QU, England Tel: +44 (0)1254 669090 Fax: +44 (0)1254 669091 Email:
[email protected] Registered in England: 3747773
www.heatmiser.com
Twitter: @heatmiseruk
Facebook: facebook.com/thermostats
11/16 06/17
WEEE Registration Number: WEE/GF0052TQ
