Transcript
SUBMITTAL QSHE-243 / QSHC-243
www.Quietside.com
Wall mounted, single zone, split system
Job Name Purchaser Submitted to Unit Designation
Location Engineer Reference Schedule #
Approval
Construction
Specifications Nominal Capacity* Performance*
24,000 24,000 13 / 11.3 7.7 4.4
Cooling (Btu/h) Heating (Btu/h)
SEER / EER HSPF Condensate (pints/hour) Voltage (ø/V/Hz)
Power
1 / 208-230 / 60 8.5 8 20 13.8 A
Cooling Heating Max Breaker Amps Min. Circuit Ampacity
Rated Current (amps)
Dimensions
Indoor Unit Outdoor Unit Indoor Unit Weight (lbs.) Outdoor Unit Condensate Connection
Heat Exchanger
Type Indoor & FPI Outdoor Unit Pipe Diameter
48 1/4 X 13 X 9 5/8 35 1/2 X 32 7/8 X 13 44 143 11/16" OD
WXHXD (Inches)
Aluminum Fin - Copper Tube 18 1/4"
High/Medium/Low Sound Pressure Indoor Unit Level (dB) Outdoor Unit Operating Temperatures*
Cooling Heating
⁰F ⁰F
50 / 47 / 44 59 65 ≤ T ≤ 115 14 ≤ T ≤ 70
*Cooling below 65⁰F is possible using a low ambient kit and crankcase heater
Pipe Connections
Refrigerant
High side Low side Maximum Line Set Length Maximum Vertical Separation Indoor & Outdoor
Type Control Method Factory Charge Charged for Additional Refrigerant Type
Compressor
RLA L.R.A.
Evaporator Fan RLA Air Volume
Accessories
Amps CFM
Cross Flow 0.4 610 / 665 / 725
W Amps
PSC 60 0.9
Condensate pump Low Ambient Kit Wall Bracket Line Sets - 25' and 50' (Insulated and flared, interconnect cable included)
Safety Certifications Warranty
R410A Capillary Tube 78.4 oz 25 feet 0.3oz / ft over 25 feet Single Speed Rotary 10 46
Motor Condenser Fan Output RLA
3/8" 5/8" 50' 20'
Amps Amps
Type
QSHE-243
QSHC-243
•
Construction • The outdoor unit shall be galvanized steel with a baked on powder coated finish for durability • The indoor shall have a UL94 V0 chassis with galvanized steel mounting bracket
Heat Exchanger • The heat exchanger shall be mechanically bonded fin to copper tube Controls • The unit shall be operated via communication with line voltage signal •
SLS-2508 / SLS-5008
ETL & ETLc 5 Years compressor, 1 Year Parts, 90 Day limited labor
Defrost is initiated by demand, not time
• 14AWG X 6 interconnect wire between condenser and evaporator •
ASP-MO-UNIV 110-250 ICM-326H CKN-250 (or larger model)
Electro-static, washable, main filter as standard
Evaporator ships with wireless controller as standard
Refrigerant System • The refrigerant shall be R410A •
The compressor shall be a hermetically sealed rotary type
• Refrigerant flow shall be controlled by capilary tube at outdoor unit •
The reversing valve shall be energized for heating mode
Indoor Fan • Indoor fan is a single, crossflow type •
Four speed settings and auto setting
•
An auto swing louver shall direct airflow
*Nominal cooling capacities are based on: Indoor temperature: 80⁰F DB, 67⁰F WB. Outdoor temperature: 95⁰F DB, 75⁰F WB. *Nominal heating capacities are based on: Indoor temperature: 70⁰F DB, 60⁰F WB. Outdoor temperature: 47⁰F DB, 43⁰F WB.
Quietside maintains a policy of ongoing development, specifications are subject to change without notice. Refer to www.AHRIdirectory.org for current reference numbers.
888-699-6067 www.Quietside.com
