Preview only show first 10 pages with watermark. For full document please download

Submittal Option Mf5, Mounting Frame Bi

   EMBED

Share

Transcript

Option MF5 Series Mounting Frame Bi-Level Refrigerated Fountain q Stainless Steel Model: A0000000-MF5 S U G G E S T E D Model A0000000-MF5 is an in-the-wall mounting frame for bi-level, refrigerated fountains. The mounting frame provides additional support and is manufactured from a heavy gage galvanized steel and supplied with pre-drilled mounting holes. Member of U.S. Green Building Council Acorn Engineering Company™ assumes no responsibility for use of void or superseded data. © Copyright Acorn Engineering, City of Industry, CA Member of Morris Group International. Please visit www.acorndrinkingfountains.com for most current specifications. Submittal # A0.MF5 Date: 02/01/13 Recyclable Product COMPLIES WITH S T A N D A R D n Heavy gage galvanized steel n Pre-drilled mounting holes “NO OPTIONS AVAILABLE” Water Conserving Product ACORN ENGINEERING Member of 15125 Proctor Ave. City of Industry, CA 91746 U.S.A. Phone 800-591-9360 626-336-4561 Fax 626-855-4894 T E C H N I C A L All dimensions are nominal and subject to manufacturer's change without notice. Acorn Engineering Company™ assumes no responsibility for use of void or superseded data. © Acorn Engineering, City of Industry, CA, Member of Morris Group International. Please visit www.acorndrinkingfountains.com for most current specifications. q Stainless Steel Model: A0000000-MF5 1" 304 [768] TYPICAL MTG HOLE SEE NOTE 7 383 8" [968] STANDARD CONFIGURATION SHOWN HIGHER UNIT ON THE LEFT *55 8" [143] FOR 33" [838] ORIFICE HEIGHT SEE NOTE 3 1" 102 [266] MOUNTING FRAME SHOWN FOR ACORN FOUNTAINS WITH -RBL (REVERSED BI-LEVEL) CONFIGURATION GENERAL NOTES: 1. ALL DIMENSIONS ARE IN INCHES [MM]. 2. MOUNTING FRAME FOR USE WITH BI-LEVEL FOUNTAINS. *3. VERTICAL FRAME HEIGHT IS SHOWN FOR RECOMMENDED ADA ADULT HEIGHT, PROVIDING 33" [838] ORIFICE DISCHARGE HEIGHT w/ 27" [686] KNEE CLEARANCE. ADJUST VERTICAL DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE & LOCAL CODES. REFER TO FOUNTAIN ROUGH-IN FOR MORE DETAILS ON FIXTURE. 4. HOLD ROUGH-IN ±1/8" [3]. 5. THIS FRAME IS USED WITH SEVERAL FOUNTAIN MODELS. WASTE & SUPPLY HEIGHTS ARE DETAILED IN THE FOUNTAIN ROUGH-IN DRAWING. 6. FRAME MUST BE INSTALLED SO THE SIDE LIP OF THE FRAME OVER LAPS & BUTTS UP AGAINST THE FINISHED WALL. 7. SECURE THE FOUNTAIN FRAMES TO THE WALL AND SPACER USING 1/4" LAG SCREW IN Ø5/16" [8]. A0.MF5 Date: 02/01/13 Five Year Limited Warranty- (Continental United States and Canada Only) Parts are warranted for one (1) year from date of installation or 18 months from date of shipment, whichever comes first. LIMITED EXPORT WARRANTY: One (1) year on parts only. 800-591-9360 626-336-4561