Transcript
Lace & Grommet
Permanently Tensioned Projection Screen
Submittal / Planning Sheet MUST BE SUBMITTED with ORDER to DRAPER Please Check All Appropriate Selections Select Flat or Curved Frame
Flat Curved* *For curved screens, please stop here and fill out the planning sheet on page 2 of this document
Select Viewing Surface OptiFlex (Flexible)
Grey XH600V (0.6 gain) (GREENGUARD Gold Certified) Matt White XT1000V (1.0 gain) (GREENGUARD Gold Certified) Pure White XT1300V (1.3 gain) Pearl White MH1500V (1.5 gain) Other: ________________________________
CineFlex (Rear/Dual Projection) CineFlex White XT600V (0.6 gain) CineFlex MH800 (0.8 gain) CineFlex CH1200 (1.2 gain) Other: ________________________________
by
Specifications—Lace & Grommet
Lace & Grommet screen surfaces, size Hx W, (up to 40' [1219 cm] x 100' [3048 cm]) overall dimension, including webbing. Frame to be 3" (76 mm) O.D. aluminum extrusion, powder coated black. Lacing system consisting of 60-lb. (27 kg) test bungee and S-Hooks already attached. Frame shall assemble using Quick-Locking Joints. Viewing surface to have 2" (51 mm) reinforced webbing borders around four sides of viewing area, with grommets on 6" (152 mm) centers. Viewing surface to be flame and mildew resistant. Contrast Grey XH800E, Matt White XT1000E, Grey XH600V, and Matt White XT1000V viewing surfaces are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg. Curved screens available with maximum radius of 12' (366 cm). Optional plastic or IFR velour decorative trim are available. Specifications subject to change without notice.
ClearSound (Acoustically Transparent) ClearSound NanoPerf XT800V (0.8 gain) ClearSound Perf XT900V (1.0 gain) Other: ________________________________
Chroma Key Chroma Key Green Chroma Key Blue Other: ________________________________
Select Borders
Standard 2" (51 mm) black borders Optional custom border size: ________________________________
Select Optional Decorative Trim Plastic with Vel-Tex Covering IFR Black Velour
Size
Overall Surface Size* =
Hx
W
Overall Viewing Area* = Hx W *Note: For overall surface size, add 4" (102 mm) to each Viewing Area dimension and 16" (406 mm) for overall Frame.
How will the screen be mounted?
Wall Mount Floor Mount (by others) Flown/Ceiling Mount (by others)
PROJECT:
ARCHITECT: CONTRACTOR: SUPPLIER: Copyright © 2015 Draper Inc.
Form LaceGrommetSub-PlanSheet15-R2
Printed in U.S.A.
DATE:
REVISED:
Lace and Grommet Submittal/Planning Sheet by Draper
Page 2 of 2
If ordering a curved Lace and Grommet screen, please fill out and submit the information below with your order or request for quotation. Please mark appropriate response to each item. Curve Radius—Maximum and Minimum
1 What type of projector will be used?
Solid line represents screen
2 How far is the projector lens from the screen (throw distance)? 3 What is the image size of the screen? x Viewing Width (follows curve) Viewing Height Note: For overall surface size, add 4" (102 mm) to each Viewing Area dimension and 16" (406 mm) for overall Frame. 4 What is the Radius of the curve? (see drawing at right)
10' (305 cm) radius maximum
5 *How will the screen be mounted? Wall Mount Floor Mount (by others) Flown/Ceiling Mount (by others) *Note–Draper wall mounting brackets may not be available for tight radii. Draper will provide a drawing, which must be approved by signature before Curved Lace and Grommet order can be placed. Curved Lace and Grommet Planning Sheet and Drawing must accompany order.
Extension Wall Bracket
2½" (64 mm)
Extension Wall Bracket
Ø3" (77 mm)
1¾" (44 mm) 3½" (89 mm)
2½" (64 mm) MOUNT VIEW
23/8" (60 mm)
3 /8" (98 mm)
www.draperinc.com
21/8" (55 mm) 17/8" (49 mm)
/8" (22 mm)
7
7
(765) 987-7999
3½" (89 mm)
Extension
3½" (89 mm) 37/8" (100 mm)
Ø.3" (76 mm) 17/8" 49 mm)
2½" (64 mm)
Fixed Wall Bracket
2" (51 mm)
½" (13 mm)
Ø.385" (10mm) thru four places
½" (13 mm)
Fixed Wall Bracket
½" (13 mm) 2½" (64 mm)
3½" (89mm)
11 GA C.R.S.
¾" (19 mm)
Wall Brackets*
Dimensions—Wall Brackets
Fixed
2½" (64 mm) 4" (101 mm)
200' (6096 cm) radius minimum
1¾" (44 mm)
6 Select Viewing Surface: OptiFlex (Flexible) Grey XH600V (0.6 gain) (GREENGUARD Gold Certified) Matt White XT1000V (1.0 gain) (GREENGUARD Gold Certified) Pure White XT1300V (1.3 gain) Pearl White MH1500V (1.5 gain) Other: ________________________________ CineFlex (Rear/Dual Projection) CineFlex White XT600V (0.6 gain) CineFlex MH800 (0.8 gain) CineFlex CH1200 (1.2 gain) Other: ________________________________ ClearSound (Acoustically Transparent) ClearSound NanoPerf XT800V (0.8 gain) ClearSound Perf XT900V (1.0 gain) Other: ________________________________ Chroma Key Chroma Key Green Chroma Key Blue Other: ________________________________ 7 Select Borders Standard 2" (51 mm) black borders Optional custom border size: ________________________________ 8 Select Optional Decorative Trim Plastic with Vel-Tex Covering IFR Black Velour
8½" (215 mm) max. 10" (254 mm) max. (shown) 6½" (165 mm) min. 8" (203 mm) min. 11½" (293 mm) max. 9½" (241 mm) min. NOTE: These dimensions vary
