Submitted Model No.: _______________________________________________ Specific Features: __________________________________________________ Standard Specifications:

Transcript

T70305▲ TWO HANDLE WALL, DECK, AND FLOOR MOUNT FREESTANIDNG TUB FILLER T70210-▲LHP Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ Wall Mount Configuration 13 1/8" (333 mm) 4" (102 mm) • Insulated floor and deck risers to control surface condensation and heat. **10 13/16" (275 mm) • 60"-82" stretchable finished metal hose. • High flow ceramic control valves. • Twin lever handles. • Certified dual check valves in handshower, 2.0 gpm 2 5/16" (59 mm) @ 80 PSI (7.6 L/Min @ 552 kPa). 7/8" (22 mm) 2 7/16" (62 mm) Dia. 2 1/8" (54 mm) **5 13/16" (148 mm) **9" (229 mm) 1 3/4" (44 mm) *10 1/2" (267 mm) **11 5/16" (287 mm) Deck Mount Configuration 13 1/8" (333 mm) • Bi-directional diverter. • Dual column design, 8" center-to-center. • Drain not included. • Requires mounting hardware: - RP73764▲ wall mount unions - RP73765▲ deck mount risers - RP73766▲ floor mount risers • Floor mount configuration requires rough-in to complete installation: - R70200-WS with integrated stops. - R70200 without stops, provides maximum flow. • *Optional riser extension set (RP73767▲) provides 2" of additional spout height for deck and floor mount configuration. • **Optional spout reach extension set (RP80157▲) provides 2" of additional spout reach for wall, deck, and floor mount configuration. WARRANTY 8" (203 mm) 4" (102 mm) 2 1/8" (54 mm) • Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes: or, for commercial users, for 5 years from date of purchase. **8 1/2" (216 mm) *13 1/8" (333 mm) WARNING: Risk of personal injury. Do not use the tub filler as a grab bar or support bar. Install this product according to the installation guide. 2 5/16" (59 mm) COMPLIES WITH: • ASME A112.18.1 / CSA B125.1 *8 3/4" (222 mm) 7/8" (22 mm) Indicates compliance to ICC/ANSI A117.1 - Applies to valve control only. 3" (76 mm) Max. Deck Thickness ▲ Designate Proper Finish Suffix **6 11/16" (170 mm) **8 1/4" (210 mm) **3 1/2" (89 mm) **9" (229 mm) Brizo Kitchen & Bath Company reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.brizo.com for finish options and product availability. 0 69 138 Pressure (kPa) 207 276 345 414 483 552 621 68.2 16 60.6 14 53.0 Tub Filler 12 45.4 10 37.9 8 Tub Filler w/ R70200-WS 30.3 22.7 6 4 0 15.1 Handshower 2 0 10 20 30 40 50 60 Pressure (PSI) 70 Brizo Kitchen & Bath Company Indianapolis, Indiana 46280 A Division of Masco Corporation of Indiana © 2015 Brizo Kitchen & Bath Company 80 7.6 90 0 Flow (Liters Per Minute) *2 1/2" (64 mm) Flow (U.S. Gallons Per Minute) 18 1 3/4" (44 mm) BSP-B-T70305 Rev. C STANDARD SPECIFICATIONS:­ • Solid brass construction. • Rotating handshower cradle rotates 90˚ in either direction. 10 5/8" (270 mm) 8" (203 mm) 2 7/16" (62 mm) ■ Baliza® Collection ■ Wall, Deck or Floor Mount Floor Mount Configuration 13 1/8" (333 mm) 8" (203 mm) 4" (102 mm) **8 1/2" (216 mm) 2 1/8" (54 mm) 2 5/16" (59 mm) 1 3/4" (44 mm) *42 3/8" (1076 mm) *38" (965 mm) *31 3/4" (806 mm) 1 3/8" (35 mm) 4 11/16" (119 mm) **3 1/2" (89 mm) **6 11/16" (170 mm) **8 1/4" (210 mm) **9" (229 mm)