Subsea Product Range

Transcript

Subsea Product Range BR67 GR29 UNDERWATER BREAKER/DRIVER PG04 PEANUT GRINDER UNDERWATER GRINDER IW12 UNDERWATER IMPACT WRENCH DL07652 UNDERWATER DRILL IW16 UNDERWATER IMPACT WRENCH BR87 UNDERWATER BREAKER / DRIVER DESCRIPTION The Stanley BR87 Underwater Breaker/Driver is the largest in the Stanley range and is used for the heaviest of breaking tasks and ground rod installation. It is used for heavy concrete and rock breaking, coral removal, rod and anchor driving. The BR87 has T handle with a large trigger for precise control, plus a diaphragm accumulator . This provides additional blow energy and reduces recoil. FEATURES • T-Handle with large on/off trigger for precise control SPECIFICATIONS • Stainless Steel spool and fasteners Steel Capacity 11⁄8” x 6” Hex Full Relief Setting 2250 psi / 155 bar Weight (at handles) 85 lbs / 39 kg Length 29” / 73.6 cm Width (less tool bit) 16” / 41 cm Hydraulic Ports -8 SAE O-ring System Type Open Center Flow Range 7-9 gpm / 26-34 lpm Optimum Flow 8 gpm / 30 lpm Working Pressure 1500-2000 psi / 105-140 bar Hose Whips Yes (3⁄8" NPT Male thread) Handle Type T-Handle • Modular design for ease of service Performance 1080 bpm @ 8 gpm • Latch retainer www.patriot-int.com • Trouble free diaphragm accumulator provides additional blow energy and reduces recoil • Feathering on/off valve allows easy initial tool bit placement • Uses standard 11⁄8" x 6" hex shank tool bits • Four tie rod design for durability • Operates in any position GR29 UNDERWATER GRINDER DESCRIPTION The Stanley GR29 Underwater Grinder is a portable, hand held tool designed for and use by a diver or ROV. It is primarily used for grinding and cutting operations, but can also be fitted with rotary wire brushes and a variety of abrasive and polishing discs. FEATURES • Integral Stanley Hyrevz gear motor is manufactured to exacting standards to deliver maximum efficiency • Stainless Steel spools and fasteners SPECIFICATIONS Chuck Capacity 9” (230mm) Dia Weight 6.4 Kg Width 305mm Hydraulic Ports -8 SAE O-Ring System Type Open Centre Flow Range 15 to 45l lpm Optimum Flow 38 Litres lpm Working Pressure 2,500 psi max / 175 Bar Mounting Type DPC Discs on 5/8-11 Arbor Motor Stanley HyrevzTM Gear Performance 2,700 / 3,200 rpm @ 38/45 lpm www.patriot-int.com • Two assist handle to be conveniently placed by the operator. Either position is at a most comfortable handling position from the valve handle • Oversized trigger with guard for diver comfort • Adjustable wheel guard for various positions • Plastisol covered handle for comfortable grip • By loosening the clamp screw the guard may be rotated to any convenient position DL07652 UNDERWATER DRILL DESCRIPTION The Stanley DL07 Hydraulic Drill is a forward/reverse, variable speed drill with a ó" keyed chuck for underwater drilling applications. The DL07 has more than enough torque to drill most steel, masonry, wood or coral. A two position assist handle and trigger guard are standard. See chart below for speeds at select gpm of hydraulic flow. SPECIFICATIONS FEATURES • Integral Stanley Hyrevz gear motor produces high torque • Stainless Steel spools and fasteners • Forward-Reverse with variable speed • Dual position assist handle provides increased control • Oversized trigger with guard for operator comfort • Wiper seals on reversing and trigger spool • Built in reverse check valve ensures long seal life • Plastisol handle for comfortable ergonomic grip • Forward position of handle provides better balance • Open Center/Closed Center-Dual Spool Feature • Cast-in lifting eye Chuck Capacity ó" / 12 mm Performance See Table at Below Flow Range 3-10 gpm / 11.3-38 lpm Working Pressure 1000-2000 psi / 70-140bar Full Relief Setting 2250 psi / 155 bar Weight 7.8 lbs / 3.5 kg Length 10." / 26.7 cm Hydraulic Ports - 8 SAE O-ring Couplers No (See Accessories) Hose Whips Yes (3⁄8" NPT Male Thread) DL07 Speed/Hydraulic Flow 350 rpm @ 3 gpm / 11.3 lpm 475 rpm @ 4 gpm / 15 lpm 750 rpm @ 6 gpm / 23 lpm 1000 rpm @ 8 gpm / 30 lpm 1250 rpm @ 10 gpm / 38 lpm DL07 Torque at PSI/Bar 4 ft lbs @ 500 psi 0.5 Nm @ 35 bar 9 ft lbs @ 1000 psi 1.2 Nm @ 70 bar 14 ft lbs @ 1500 psi 1.9 Nm @ 105 bar 19 ft lbs @ 2000 psi 2.6 Nm @ 140 bar www.patriot-int.com IW12 IMPACT WRENCH DESCRIPTION This Underwater Impact Wrench is the Stanley IW12 is a 3/4" square drive tool with adjustable impact intensity from 250-1200ft.lb. (3401632Nm). Stanley Impact Wrenches can be operated over wide flow ranges, in the case of the IW12, 15-45lpm. The IW1234001 Model comes complete with quick disconnect couplers. The IW12 Model can handle a wide variety of commercial diving applications. The rugged Stanley impact wrench mechanism is simple to maintain and has many features to give underwater impact wrench proven reliability. Torque transmission to the commercial diver is minimal with the swing hammer design. Designed to run from a wide range of hydraulic circuits, the Stanley Hydraulic Underwater Impact Wrench IW12 is used for underwater nut, bolt and anchor bolt driving and is equally popular for wood boring and drilling. The larger feathering trigger is convenient to use and gives the commercial diver complete control plus the reversing valve provides instant reverse. For commercial diver comfort the Stanley IW12 Hydraulic Underwater Impact Wrench handle is coated with a heat insulating, shock absorbing material. No other underwater tool can match the power, light weight and overall efficiency of Stanley's underwater impact wrenches. FEATURES • Adjustable impact intensity • Torque transmission to the commercial diver is minimal with the swing hammer design • Coated with heat insulating and shock absorbing material • Great for underwater nut, bolt, and anchor bolt driving • Large feathering trigger convenient to use and gives the commercial diver complete control of the impact wrench • Standard reversing valve to provide instant reverse www.patriot-int.com SPECIFICATIONS Chuck Type: Sq. Drive: 3/4 in. (1.9 cm) Weight: 14 lbs (6.4 kg) Length: 9.5 in. (24.1 cm) Width: 4 in. (10.2 cm) Hydraulic Pressure: 1000-2000 psi (70-140 bar) Torque: 250-1200 ft. lbs (340-1632 Nm) Input Flow Range: 4-12 gpm (15-45 lpm) Optimum Flow: 5-10 gpm (20-38 lpm) Porting: 8 SAE O-ring Connect Size And Type: 3/8 in. Male Pipe Adapter Motor: Hyrevz™ motor IW16 IMPACT WRENCH DESCRIPTION The Stanley IW16 Impact Wrench is a 1" square drive underwater hydraulic wrench with adjustable impact intensity from 500-2500ft.lb. (680-3400Nm). Stanley Impact Wrenches can be operated over wide flow ranges, in the case of the IW16, 26-45lpm. Used by commercial divers for underwater nut, bolt, and anchor bolt driving and other medium to heavy duty applications. Adjustable Impact Intensity of the Stanley Hydraulic Underwater Impact Wrench IW16 makes it ideal for a wide range of uses by the commercial diver. Rugged Swing-Hammer impact mechanism provides easy servicing for reduced maintenance costs and greatly reduces the transmission of torque to the commercial diver reducing fatigue through repetitive tool operation. SPECIFICATIONS FEATURES Capacity 1” Square Drive Weight 12 kg Flow Range 25 - 45 lpm Optimum Flow 30 lpm Pressure 105 – 140 bar Torque 680 – 3400 Nm Dimensions: 14.5 in. L x 4.5 in. W (37 cm L x 11 cm W) Connect Size and Type: 3/8 in. Adaptor to -8 SAE Port • Adjustable impact intensity • Lever-type forward/reverse spool to increase operator efficiency • Large “D” handle for gloved operation • Feathering On/Off Valve allow the underwater operator to control the amount of energy to the tool • Swing hammer mechanism provides easy servicing and reduces the transmission of torque to the operator www.patriot-int.com Subsea Product Range SUBSEA TENSIONERS SUBSEA NUTSPLITTER TORQUE WRENCH SUBSEA DIVER CONTROL FLANGE ALIGNMENT FLANGE SPREADER FLANGE PULLER SUBSEA TENSIONERS DESCRIPTION A specially designed range of Subsea Bolt Tensioners are suited for the demanding requirements of divers operating in harsh subsea environments. Incorporating the quick reaction nut feature reduces diver fatigue, improving diver safety and productivity. This range of subsea bolt tensioning tools brings a new generation of bolting solutions. Comprising just bolt tensioning tools, this series is capable of tensioning most standard flanges. They are made from high strength stainless steel which grealy reduces maintenance work to a minimum after subsea use. FEATURES • Combined body and bridge • Lifting eye bolt • 30mm piston stroke • 1500 bar operating pressure • Twin hydraulic connections • Maximum piston stroke indicator • Split reaction nuts • Water fluid operation • Automatic piston return www.patriot-int.com SPECIFICATIONS SUBSEA NUTSPLITTER DESCRIPTION In a situation that requires fast removal of bolt from a flange, the Hydraulic Nut Splitter comes into its own. The Subsea Nut Splitter is the ideal tool for removing nuts that have seized up or corroded. They are designed with a double acting hydraulic cylinder. The Heavy Duty Blades can be easily removed to make re-grinding and replacement possible. In addition to the standard features, which are generally associated with Hydraulic Nut Splitters, our system also provides the following, additional benefits: FEATURES SPECIFICATIONS www.patriot-int.com • Tripple edge disposable cutting blade • They will crack the most robust nuts up to 5 3/8"AF • Blade positioning scale to eliminate bolt damage • Adjustable cutting depth achieved by rotating the cylinder • Sizes range from 3/4" - 31/2" bolt diameters • Designed to fit BS1560/ANSI B16.5 flanges • Versatile, reliable and trouble free operation • Compact and ergonomic design making it easy to use • Uniquely angled head design • Double acting hydraulic cylinder • Heavy duty chisels can be re-ground SUBSEA FLANGE SPREADER DESCRIPTION Like the Topside Flange Spreader, this product utilises a high load compact hydraulic cylinder together with a unique design wedge and retaining mechanism to smoothly and evenly force open the flanged joint. SPECIFICATIONS SPREADING FORCE = 14.5T (145 kN) It is recommended that tools are used in pairs giving 2 x 14.5 = 29T(2 90 kN) TOOL WEIGHT = 7kg (15.4 lbs) KIT COMPONENTS 2 x Wedgeheads 2 x 10,000 psi (700 bar) Hydraulic Hoses, 2m (78.75”) each FEATURES • Compact built-in pump • Unique interlocking first step • Deep 15 mm secure hold on first step • Requires access gap of only 6 mm • Robust, lightweight tool with carry strap • 10,000 psi (700 bar) generates spreading force of 14.5 T (145 kN) • Automatic mechanical retraction • Carry-strap • Secure hold on each step • Quick and easy operation • Saves time • Saves cost • Safe operation • Portable www.patriot-int.com 2 x 10,000 psi (700 bar) Hydraulic Cylinders 1 x 10,000 psi (700 bar) Hydraulic Single Port Sealed Hand PUMP 1 x 10,000 psi (700 bar) Twin Valve Manifold 2 x Safety Blocks 1 x Instruction Manual 1 x Robust Carry Case with Protective Foam Inserts WEIGHTS AND DIMENSIONS Tool with Hydraulic Cylinder = 7 kg (15.4 lb) Safety Block = 0.5 kg (1.1 lb) Hand Pump = 2.5 kg (5.5 lb) Hydraulic Hose = 1.0 kg (2.2 lb) Carry Case with Foam Inserts = 5.0 kg (11.02 lb) GROSSWEIGHT = 27 kg (59.5 lb) Carry Case Dimensions 550 x 390 x 180 mm (21.65” x 15.35” x 7.09”) SUBSEA FLANGE PULLER FEATURES COMPACT DESIGN Designed to fit ANSI B16.5, MSS SP44, API 6A and most other flange applications using dedicated flange hole adaptors. HYDRAULIC ANCHOR COLLET RELEASE Anchor collet automatically grips wire rope (without hydraulic pressure). AUTO ADVANCE COLLET RELEASE Advance collet fully disengages when the pulling cylinder is fully retracted. DESCRIPTION Designed for high performance and reliabilty, the Subsea Flange Puller is a compact device used to align or pull together flanges prior to the application of bolts and gaskets. SPECIFICATIONS MANUAL RETRACT COLLET RELEASE Retract collet can be manually disengaged, allowing the pulling cylinder (including Advance and Retract collets) to be removed from the wire rope whilst the rope is installed in the flanges. Also allows the pulling system to be removed when pipe spring is evident (pipe spring makes the Anchor collet difficult to release). LOW ROTATION WIRE ROPE Special high load, 19mm and 22mm low rotation, steel wire rope ensures effective collet grip and reduces bird caging effects and strand unwinding. REMOTE DIVER CONTROL VALVE Pulling Cylinders are controlled via a separate Valve Control Console allowing the diver to control the pullers remote from the work site. This eliminates bulky cylinder mounted control valves and negates constant diver intervention between pullers when advancing and retracting the cylinders. Maximum capacity of cylinder 20.0 tonf / 199.3 kN Maximum working pressure of cylinder 10,000 psi / 689 Bar Maximum stroke of cylinder 4.0 in / 102 mm Diameter of wire ropes / drawbar available 19.0 mm / 22.0 mm / 1-1/8” 8UN Drawbar Specified minimum breaking load of rope 19.0 mm - 307 kN (30.8 tonf) 22mm - 415 kN (41.6 tonf) System operating pressure with 19.0 / 22.0 mm rope 5000 psi (413 Bar) System operating pressure with 1-1/8” drawbar (Gr B7) 10,000 psi (690 Bar) www.patriot-int.com United Kingdom Aberdeen T: +44 (0) 1224 724726 F: +44 (0) 1224 724727 E: [email protected] Birmingham T: +44 (0) 121 522 0261 F: +44 (0) 121 522 0262 E: [email protected] www.patriot-int.com The Netherlands Germany Dordrecht T: +31 (0) 78 652 4111 F: +31 (0) 78 652 4112 E: [email protected] Mønchengladbach T: +49 (0) 2166 990 28 0 F: +49 (0) 2166 990 28 10 E: [email protected] Denmark Hamburg T: +49 (0) 152 227 119 61 F: +49 (0) 2166 990 28 10 E: [email protected] Esbjerg T: +45 751 80 328 F: +45 751 80 825 E: [email protected]