Preview only show first 10 pages with watermark. For full document please download

Sunco Stabilizer Literature

   EMBED

Share

Transcript

Turning Design Into Quality Products www.suncomarketing.com Implement drift with a When the Planter Trails on Hills like Thi Stabilizer. s.. . ... Straighten it out with Sunco Stabilizers Planter Mount Bracket allows stabilizer installation between planter units with row spacing 30 inches or wider. Pull-type or . . . Mounted The Stands Alone With These Features..... Dependable coil spring protection Standard safety shield Mount brackets available for most implements, including planters 14 inches of quick and easy coulter height adjustment Heavy duty 29” coulter Equipped with heavy duty implement hub and spindle Spring pre-load to keep coulter from sagging when implement is raised Maintenance-free pre-lubed bushing Designed To Stabilize The Heaviest Equipment ➞ Optional mounting brackets: 8”, 24”, 48”, 60”, 72” and planter mount ➞ Mounts to 7x7, 5x7, 4x4 and 4x7 tool bars ➞ Gives positive position control for any implement to eliminate slippage ➞ Improves performance of GPS guidance and steering type guidance systems and reduces implement parallel linkage wear ➞ Can be mounted on implements such as planters, bedders, cultivators, etc. REAR-MOUNTED DISC STABILIZER Turning Design Into Quality Products Sunco Marketing www.suncomarketing.com P.O. Box 1068 North Platte, NE 69103 (308) 532-2146 (Specifications and Design Subject to Change Without Notice) See Your Local Sunco Stabilizer Dealer