Preview only show first 10 pages with watermark. For full document please download

Sunset Lake Homeowner`s Association Guide To The Clubhouse Hdtv

   EMBED


Share

Transcript

As of: 28 Jan 14 SUNSET LAKE HOMEOWNER’S ASSOCIATION GUIDE TO THE CLUBHOUSE HDTV AND SOUND SYSTEM THIS GUIDE MUST REMAIN IN THE CLUBHOUSE As of: 28 Jan 14 SUMMARY OF UPDATES & CHANGES DATE COMMENTS 4 JAN 14 28 JAN 14 ORIGINAL PUBLICATION ADDED IPOD INFO Tab 1 Page 1 of 3 As of: 4 Jan 14 TELEVISION 1) Push the POWER button on the control panel 2) Push the HDTV icon on the control panel screen 3) Push the icon on the control panel screen to select the preset channel 4) Adjust volume using the VOL + and VOL – buttons on the control panel When you are done with the system 5) Push the POWER button on the control panel to turn off the system Tab 1 Page 2 of 3 As of: 4 Jan 14 TELEVISION CHANNELS NOTE: The HDTV has an outdoor antenna that receives DTV (digital TV) signals . CLUBHOUSE AVAILABLE CHANNELS Highlighted channels are preset on the control panel As of: 4 Jan 14 Tab 1 Page 3 of 3 TELEVISION (selecting manual channel) 1) To manually enter a channel number push the “right arrow” on the control panel screen 2 times First “push” Second “push” 2) To manually enter a channel number push the numbers on the control panel screen keypad and push ENT to select 3) Push the MAIN button on the control panel to return to the main menu page 1) To increase or decrease a channel number push the “right arrow” on the control panel screen 10 times 2) Push the CH + or CH – icon on the control panel screen to select desired channel 3) Push the MAIN button on the control panel to return to the main menu page As of: 4 Jan 14 Tab 2 Page 1 of 1 STREAMING INTERNET TO HDTV FROM YOUR DEVICE (requires HDMI cable) HDMI to HMDI cable typically used with laptop computers HDMI to micro-HMDI cable typically used with tablets (Kindle, Nook, iPad, etc) or smartphones NOTE: Your device can be a laptop, tablet or smartphone. You must be a subscriber to a service provider to access their content (ESPN, Netflix, Amazon Prime, HBO GO, Skype, PANDORA, etc) 1) Connect your device to the clubhouse WiFi (SSID “SSL Lodge”; WPA personal passphrase is “clubhouse”) 2) Use your device to select your desired service (streaming movie, cable TV, streaming music, video conference, etc) 3) Connect your device using the correct HDMI cable (see above) and follow directions for COMPUTER APPLE AIRPLAY NOTE: If your device is an Apple product that is AirPlay capable, then you can wirelessly stream content direct to the HDTV (skip step #3 above.) Tab 3 Page 1 of 1 As of: 4 Jan 14 PANDORA 1) Push the POWER button on the control panel 2) Push the PANDORA icon on the control panel screen NOTE: Control panel screen changes to DENON INTERNET RADIO 3) Push the desired station on the control panel screen NOTE: Control panel screen and the TV both display PANDORA’s song information When you are done with the system 4) Press the POWER button on the control panel to turn off the system Tab 4 Page 1 of 1 As of: 4 Jan 14 COMPUTER (requires HDMI cable) NOTE: You can connect your device to the clubhouse WiFi (SSID “SSL Lodge”; WPA personal passphrase is “clubhouse”) 1) Push the POWER button on the control panel 2) Push the PC icon on the control panel screen NOTE: Control panel screen changes to COMPUTER 3) Plug the HDMI cable from your computer, laptop, tablet or smartphone into the HDMI slot located below the control panel When you are done with the system 4) Push the POWER button on the control panel to turn off the system Tab 5 Page 1 of 1 As of: 4 Jan 14 MICROPHONE (requires microphone) 1) Push the POWER button on the control panel 2) Push the MIC icon on the control panel screen NOTE: Control panel screen changes to Microphone 3) Slide the microphone power switch from OFF to ON NOTE: The microphone is active when you see the green light; you can MUTE the sound by sliding the microphone power switch to MUTE 4) Push VOL DN or VOL UP on the control panel screen to adjust volume When you are done with the system 5) Push the POWER button on the control panel to turn off the system and slide the microphone power switch from ON to OFF Tab 6 Page 1 of 4 As of: 4 Jan 14 SLIDESHOW ON TV USING USB STORAGE NOTE: Requires TV remote, USB storage device with pictures, and HDTV (does not require use of the control panel) 1) There are 3 remote controls; use the AQUOS/SHARP remote 2) Turn HDTV ON by pushing the power switch on the back/left side of the TV NOTE: TV “on” indication is the ^ light below the SHARP label at the bottom of the screen TV is OFF TV is ON Page 1 of x Tab 6 Page 2 of 4 As of: 4 Jan 14 3) Locate the TV’s USB cable and insert your USB drive 4) Use the TV remote to select the USB as input (push INPUT and then use the arrow button to highlight USB on the 2nd page of the input menu, then select ENTER) INPUT menu appears when INPUT button pushed Push arrow buttons to highlight USB, then push ENTER As of: 4 Jan 14 NOTE: The HDTV should display the USB Media menu 5) Use the TV remote and push ENTER to select Photo NOTE: The HDTV should display the PHOTO menu of available photos 6) Use the TV remote and push ENTER to select the location of your photos Tab 6 Page 3 of 4 Tab 6 Page 4 of 4 As of: 4 Jan 14 NOTE: The HDTV should display specific photos available for viewing C 6) Use the TV remote to push the button to start the slide show When you are done with the slideshow 5) Push the POWER button on the back of the HDTV to turn the TV off; remove your USB drive from the USB cable Tab 7 Page 1 of 2 IPOD (requires access to the AV closet and IPOD connector with USB) As of: 28 Jan 14 1) Push the POWER button on the control panel NOTE: this turns on the power to the entire system; you will not use the control panel again until you are done 2) The AV closet is located in the kitchen area; it’s locked so you will need a key to get inside 3) You will only use the Marantz receiver with your IPOD (you will need a ladder to set it up; the ladder is located in the closet next to this one) 4) Controls for the Marantz receiver Input/source selector Power (ensure light is ON) Display Volume control iPod/USB connection Tab 7 Page 2 of 2 As of: 28 Jan 14 5) Steps to play music with your IPOD: (a) Ensure POWER is ON (red light on) (a) (b) Rotate input/source selection knob (b) until the display indicates: iPod/USB Connect (c) Connect the IPOD to the receiver and turn the IPOD ON with music playing (c) (d) The display will indicate: (d) Direct Mode (e) Rotate volume knob to increase or decrease volume (a setting of ~45-50 is a good place to start) (e) When you are done with the music 6) Remove your IPOD from the receiver connection; close and lock the AV closet; push the POWER button on the control panel