Preview only show first 10 pages with watermark. For full document please download

Superbrush Single Brush Sanders 24"/36"/49" Widths

   EMBED


Share

Transcript

SuperBrush Single Brush Sanders 24"/36"/49" widths SUPERBERUSH BENEFITS A SuperBrush provides the following benefits when compared to hand-finishing:  Faster output  Reduced rework  Greater surface consistency Applications  Raw Wood Sanding | White Wood Sanding • Break sharp edges • Open grain for even finish absorption • Blend out minor defects  Sealer Sanding | Primer Sanding | Scuff Sanding • Removes raised fibers and grain (denib/defuzz)  Degloss previously finished wood  Clean reclaimed wood  Wire brushing • Distress (weathered/Southwest finish) • Pull out soft grain to create textured surface SUPERBRUSH MACHINE FEATURES  Easy to operate/low learning curve  Infinitely variable brush speed and conveyor feed rate allow Sanding Capacity: Maximum Width (in): 24, 36, or 49 Minimum Length (in): Maximum Thickness (in): Minimum Thickness (in): 10 for endless finish possibilities  Quickly change brush heads or abrasive loadings  Fully adjustable tension rollers prevent stock slippage 1/32 Dimensions HxWxD (in): 24” model: 52 x 46 x 35 36” model: 52 x 58 x 35 49” model: 50 x 71 x 31 Speed: infinitely variable, 400-1200 RPM brush 24” model: steel with hinged back, one (1) 4” vacuum port, 600 CFM min.  Reinforced steel conveyor bed with a poly conveyor belt  Precision height adjustment 11, varies with brush style Dust Hoods:  Bristle Contact Gauge included 36” model: steel with hinged back, two (2) 4” vacuum ports, 1200 CFM min. 49” model: steel with hinged back, three (3) 4” vacuum ports, 1800 CFM min. Conveyor Motor: Direct drive D.C. motor, infinitely variable 0-15 FPM 24” model: 100 in.-lb. torque 36” model: 100 in.-lb. torque 49” model: 200 in.-lb. torque SuperBrush 24, 3 PH Drive Motor (TEFC): 5 HP 91367 SuperBrush 36, Single Phase Power Requirements: 93367 SuperBrush 36, 3 PH 208-230V, 60HZ 1 PH, 30 amp service; 3 PH, 20 amp service 71497 SuperBrush 49, Single Phase 73497 SuperBrush 49, 3 PH Shipping Weight (lbs): 24” model: 525 36” model: 605 49” model: 775 Item# Description 91267 SuperBrush 24, Single Phase 93267 24" and 36" SuperBrushes are made in Taiwan to SuperMax specifications. The 49" SuperBrush is made in the USA. SuperMax Tools 1275 Corporate Center Drive, St. Paul, MN 55121 | P 888-454-3401 F 651-454-3465 24/36/49W_3.27.14 www.SuperMaxTools.com