Transcript
superi
rtec
connectivity solutions
superi
rtec
TABLE OF CONTENT CATEGORY6 PRODUCTS AND SOLUTIONS UTP 4-pair Cables 19” Rack Mount Patch Panels RJ45 Keystone Jacks RJ45-RJ45 Patch Cords Work Area Keystone Faceplates & Adapters
CATEGORY3 PRODUCTS AND SOLUTIONS Multi-pair UTP Cables 50-port RJ45 Patch Panel
FIBER OPTIC PRODUCTS & SOLUTIONS Indoor Cables
P5 P6 P8 P 10 P 11 P 12 P 13 P 14 P 16 P 17 P 18
Tight Buffered, with Aramid Yarn and LSZH Sheath Zip cord
Indoor/Outdoor Cables
P 20
Tight Buffered, with Glass Yarn and LSZH Sheath Central Tube, with Glass Yarn and LSZH Sheath Multitube, with Glass yarn and LSZH Sheath
Outdoor Cables
P 23
Central Tube, with Glass Yarn and PE Sheath Central Tube, Corrugated Steel Armored with Glass Yarn and PE Sheath Multitube, with Glass yarn and PE Sheath Multitube, Corrugated Steel Armored with Glass yarn and PE Sheath
Special Cables 19” Rack-Mount Fiber Panels Solutions AP4U APW3 Lockable Wall Box with 4LGX Slots Fiber Patch Cords Series Fiber Pigtails Series Fiber Connectors Series Fiber Adapters Series
POWER DISTRIBUTION UNITS Standard Horizontal and Vertical PDUs Intelligent PDUs
CABLE MANAGERS SERIES 19’’ Cable managers
TOOLS AND ACCESSORIES Accessories
P 28 P 29 P 31 P 32 P 33 P 34 P 35 P 36 P 37 P 38 P 39 P 41 P 42 P 43 P 44
Velcro tape Splicing heat-shrink sleeves
Tools
P 45 110 punch down tool Modular crimp Tool Cable jacket stripper Fiber termination kit
WARRANTY PROGRAM
P 46
superi
rtec
Tools & Accessories Cable Managers Series P6
19” Rack Mount Patch Panels
P8
RJ45 Keystone Jacks
P 10
RJ45-RJ45 Patch Cords
P 11
Work Area Keystone Faceplates & Adapters
P 12
Category 6 Products & Solutions
UTP 4-Pair Cables
Category 3 Products & Solutions
Fiber Optic Products & Solutions
Power Distribution Units
CATEGORY6 PRODUCTS AND SOLUTIONS
5
UTP 4-pair Cables
Superiortec Category 6 unshielded twisted-pair cable is designed for applications demanding high-bandwidth and reliable transmission. Engineered with state-of-the-art design, this cable is the perfect transmission media for Voice, Video and High speed data transmission. It features a separator among the twisted pairs to lower the cross talk at each point along the full length of the cable. It comes with two options for the outer jacket: PVC or Low Smoke Zero Halogen (LSZH).
APPLICATION t
Access network
t
Fast Ethernet 100BASE-TX
t
Gigabit Ethernet 1000BASE-T
t
Broadband video
t
Voice
t
All applications developed for operation over CAT6 or class E cabling
FEATURES t
Low Attenuation & Crosstalk
t
Flexible for installation in conduits, on cable trays, and under raised floor
t
Easy to Terminate
t
Color Coded Pair Identification
SPECIFICATIONS
6
t
Number of pairs: 4
t
Conductor size: 23 AWG
t
Conductor material: bare Copper
t
Conductor construction: solid
t
Outer Jacket: PVC or LSZH
t
Standards: TIA/EIA - 568
TRANSMISSION PERFORMANCE Frequency MHz
Insertion Loss
NEXT Pair- to- Pair
NEXT power sum
ELFEXT pair -to-pair
ELFEXTpower sum
ACR pair-to-pair
ACR power sum
Return Loss Solid
per 100m 1
2.0
74.3
72.3
67.8
64.8
72.3
70.3
20.0
4
3.8
65.3
63.3
55.8
52.8
61.5
59.5
23.0
8
5.3
60.8
58.8
49.7
46.7
55.5
53.5
24.5
10
6.0
59.3
57.3
47.8
44.8
53.3
51.3
25.0
16
7.6
56.2
54.2
43.7
40.7
48.6
46.6
25.0
20
8.5
54.8
52.8
41.8
38.8
46.3
44.3
25.0
25
9.5
53.3
51.3
39.8
36.8
43.8
41.8
24.3
31.25
10.7
51.9
49.9
37.9
34.9
41.2
39.2
23.6
62.5
15.4
47.4
45.4
31.9
28.9
32.0
30.0
21.5
100
19.8
44.3
42.3
27.8
24.8
24.5
22.5
20.1
200
29.0
39.8
37.8
21.8
18.8
10.8
8.8
18.0
250
32.8
38.3
36.3
19.8
16.8
5.5
3.5
17.3
ORDERING INFORMATION UTP CAT 6 4PR PVC CABLE UTP CAT 6 4PR LSZH CABLE
Category 6 Products & Solutions
CL004C60U/UTP-CM: CL004C60U/UTP-LS:
7
19” Rack Mount Patch Panels IDC Type
Superiortec’s Category 6 patch panels are designed to exceed industry expectations and surpass the governing standards. Developed to offer guaranteed bandwidth and true performance, Superiortec’s Cat 6 patch panels are assured to meet the standard when verified.
APPLICATIONS t
Access network
t
Fast Ethernet 100BASE-TX
t
Gigabit Ethernet 1000BASE-T
t
Broadband video
t
Voice
t
All applications developed for operation over CAT6 or class E cabling
SPECIFICATIONS
STANDARDS
t
CAT6-component compliant
t
Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements.
t
Backward compatible
t
Meet TIA/EIA TSB-40
t
T568A/B wiring colors for easy installation
t
Meet ISO/IEC Generic Cabling Standard 11801
t
Angle: 90 Degree
t
Meet CENELEC Generic Cabling Standard EN50173
t
Termination: 110 IDC
PHYSICAL CHARACTERISTICS t
Housing: PC UL94V-0
t
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
t
PCB: FR4 1.6mm(0.04”) thickness, 2 layers
t
Contact: PC UL94V-0, 0.45mm(0.018”) Diameter Phosphor bronze with 3 u” Gold plating on contact area
ORDERING INFORMATION PP24C6R PP48C6R
8
Patch panel 24-RJ45, Cat6 Unshielded, 568A/B wiring, 1U w/strain-relief bar Patch panel 48-RJ45, Cat6 Unshielded, 568A/B wiring, 2U w/strain-relief bar
19” Rack Mount Patch Panels Modular Type
Superiortec snap-in type UTP patch panel is designed for your customized cabling solution. Based on your requirements, you can select your preferred keystone connectors and snap them into the panel as required.
t
Snap-in type accepts keystone jacks
t
Plastic front panel (UL94V-0 plastic)
t
Window style label with port numbers
t
1U and 2U patch panel available
t
Integrated plastic cable management
ORDERING INFORMATION MP24KJR
Modular Panel (Empty), 24-Port KMJ, 1U w/strain-relief bar
Category 6 Products & Solutions
FEATURES
9
RJ45 Keystone Jacks
Category 6 keystone jack is designed for Gigabit Transmission Requirements. Together with high quality performance, the high-density design of this jack provides more flexibility for field installations. When it comes to performance, the Cat6 jack meets and exceeds the requirements of the Attenuation, Return Loss and FEXT specified in TIA/EIA-568-B.2-1 CAT6. The Near End Cross-Talk (NEXT) meets the TIA/EIA-568-B.2-1 CAT6 channel with Graybar VIP2000 limit requirements, and also meets the CAT6 15M short link requirements.
FIELD APPLICATIONS t
Wall plate
t
Surface mount box
t
Modular type (snap-in) patch panel
SPECIFICATIONS t
CAT6 component compliant
t
Backward compatible
t
T568A/B wiring colors for easy installation
t
Suitable for high-density solutions
t
Easy-to-terminate design
t
Low attenuation and cross talk
t
High reliability and superior performance
t
Termination: 110 IDC
PHYSICAL CHARACTERISTICS t
Housing: high temperature thermoplastic
t
Compact jack design, 8 positions and 8 conductors
t
Contact: phosphor bronze , with 6 u” gold plate
t
Accept 22-26 AWG solid with insulation diameter of 0.4 - 0.6 mm
ORDERING INFORMATION KJUC607 KJUC602
10
RJ45 Cat6 Jack, Keystone Unshielded, 568A/B wiring, White RJ45 Cat6 Jack, Keystone Unshielded, 568A/B wiring, Black
RJ45-RJ45 Patch Cords
Superiortec’s patch cords complement Superiortec copper system with the guaranteed performance that exceeds the standard requirements. Introducing the slim boot design making it very convenient for high-density installations requiring small footprint of the patch cord. Superiortec’s patch cords offer strain relief solution that ensures mechanical and electrical stability during and after adds, moves or changes. Superiortec’s patch cords utilize straight-thru pair orientation and are 100% component performance tested.
APPLICATIONS t
Access network
t
Fast Ethernet 100BASE-TX
t
Gigabit Ethernet 1000BASE-T
t
Broadband video
t
Voice
t
All applications developed for operation over CAT6 or class E cabling
FEATURES t
Exceeds Category 6 requirements
t
100% component performance tested
t
Fitted with strain relief boots
t
Low attenuation and cross talk
t
RJ45 plug tab to prevent snagging
t
Uses superior quality cable
t
Molded type
PCUC6-1M06 PCUC6-2M06 PCUC6-3M06
Patch Cord, Molded type, Unshielded Cat6, 1 Meter, Grey Patch Cord, Molded type, Unshielded Cat6, 2 Meter, Grey Patch Cord, Molded type, Unshielded Cat6, 3 Meter, Grey
* Add L at the end of the P/N for LSZH
Category 6 Products & Solutions
ORDERING INFORMATION
11
Work Area Keystone Faceplates & Adapters
FACEPLATES
With sleek design and quality material, Superiortec’s faceplates are the premium connectivity accessories of choice: The labeling space provides practicality for points’ referencing, while the screw-less finish provides elegant appearance. These faceplates are available in one port or two ports configurations.
KEYSTONE ADAPTERS
Whether it is a high-density office with shared working space or fancy house with decorated wall plates, the keystone adapters provide the required flexibility for such application. Superiortec’s adapters come in the standard 6C size and the extended 6CE size, which make them suitable for almost all commercial floorboxes and ring-type wall plates. The adapters can also be either flat or angled for more connecting options. The labeling area provides enough space to print point references.
ORDERING INFORMATION FPSH1UK FPSH2UK 6C-ADAPT 6C-ADAPT-A 6C BLANK 6CE-ADAPT 6CE BLANK 6CF - ADAPT 6CF - BLANK
12
UK shuttered faceplate, 1 port UK shuttered faceplate, 2 ports 6C adapter (25x38mm) 6C adapter –angled 6C blank 6CE adapter (25x50mm) 6CE blank French adapter (22.5x45mm) French blank
P 14
50-port RJ45 Patch Panel P 16
Category 3 Products & Solutions
Multi-pair UTP Cables
Category 6 Products & Solutions
Fiber Optic Products & Solutions
Power Distribution Units
Cable Managers Series
CATEGORY3 PRODUCTS AND SOLUTIONS
13
Tools & Accessories
Multi-pair UTP Cables Indoor
Superiortec Category 3 multipair cable is a general purpose, high-performance cable used for indoor voice applications. It is designed for low noise and attenuation. The Color coded pairs facilitate easy channel identification, and the flexible jacket makes is easy to pull through conduit.
APPLICATIONS t
Indoor backbone
t
Fixed installations
t
High bandwidth digital applications with low BER
t
Broadband transmission in the common mode
FEATURES
SPECIFICATIONS
t
Low Attenuation & Crosstalk
t
Number of pairs: 2,5,10,20,25,50,100
t
Flexible
t
Conductor size: 24 AWG
t
Easy to Terminate
t
Conductor material: bare Copper
t
Color Coded Pair Identification
t
Conductor construction: solid
t
Color code: multipair data cables
t
Outer Jacket: PVC or LSZH
t
Standards: TIA/EIA - 568
TRANSMISSION PERFORMANCE Frequency (MHz) 1 4 8 10 16
14
Attenuation (dB / 100m) 2.6 5.6 8.5 9.7 13.1
NEXT (dB) 41 32 27 26 23
Multi-pair UTP Cables Outdoor
Superiortec Category 3 outdoor multipair cable is a durable, high-performance cable used for tough outdoor voice applications. It is designed for long lasting life and excellent functioning. These cables are filled with water-resistant jelly compound to block the longitudinal flow of water inside cables.
APPLICATIONS t
Outdoor backbone
t
Fixed installations
t
High bandwidth digital applications with low BER
t
Broadband transmission in the common mode
FEATURES
SPECIFICATIONS
t
Low Attenuation & Crosstalk
t
Number of pairs: 2,5,10,20,25,50,100
t
Jelly-filled
t
Conductor size: 24 AWG
t
Durable
t
Conductor material: bare Copper
t
Color Coded Pair Identification
t
Conductor construction: solid
t
Color code: multipair data cables
t
Outer Jacket: PE
t
Standards: TIA/EIA - 568
TRANSMISSION PERFORMANCE Attenuation (dB / 100m)
1 4 8 10 16
2.6 5.6 8.5 9.7 13.1
ORDERING INFORMATION Z-CL xxx C30 U/UTP – yy
NEXT (dB) 41 32 27 26 23
Category 3 Products & Solutions
Frequency (MHz)
I-indoor A-outdoor t Number of pairs: 2,5,10,20,25,50,100 t Jacket type: LS: LSZH CM: PVC PE: Polyethylene
15
50-port RJ45 Patch Panel
Superiortec’s High density Category 3 patch panel is designed for voice grade applications. This patch panel provides 50 RJ45 ports (25x2) within 1 rack unit (RU) only, which offers an effective way to terminate a multi-pair cable and provide RJ45 ports interface. With the clear numbering scheme, it enables easy and quick identification of the outlets.
STANDARD COMPLIANCE ISO/IEC11801: 2000 ANSI/TIA/EIA-568-A
FEATURES AND BENEFITS t
High density, economical, 1RU design
t
Standard 19” mounting
t
Gloss black metal finishing
t
Suitable for voice applications
MECHANICAL SPECIFICATIONS Jack insertion durability: ≥ 750 mating cycles IDC block durability: ≥ 200 termination cycles
PHYSICAL SPECIFICATIONS Jack housing and IDC block: Polyphenylene oxide, UL94V-O RJ45, 8-position connector: Meets FCC part 68 and IEC 603-7 IDC wire range: Solid or stranded, 22-26 AWG, 0.64mm2 – 0.4mm2
ORDERING INFORMATION PP50C3R
16
50 Port Voice Tray Patch Panel, 1U (25*2)
Tools & Accessories Cable Managers Series P 18
Indoor/Outdoor Cables
P 20
Outdoor Cables
P 23
Special Cables
P 28
19” Rack-Mount Fiber Panels Solutions
P 29
AP4U
P 31
APW3 Lockable Wall Box with 4LGX Slots
P 32
Fiber Patch Cords Series
P 33
Fiber Pigtails Series
P 34
Fiber Connectors Series
P 35
Fiber Adapters Series
P 36
Category 6 Products & Solutions
Indoor Cables
Category 3 Products & Solutions
Fiber Optic Products & Solutions
Power Distribution Units
Fiber Optic Products & Solutions
17
Indoor Cables Tight Buffered, with Aramid Yarn and LSZH Jacket
APPLICATION Superiortec’s indoor cables are ideal for backbone and horizontal sub systems installations such as FTTH and FTTD, due to their high flexibility and small dimensions. The outer jacket is made of LSZH material that makes the cable suitable for indoor installations. The fibers are tight-buffered for direct connector assembly.
STANDARDS COMPLIANCE t
Flame retardancy
IEC 60332-3
t
Smoke density
IEC 61034
t
Halogen-free
IEC 60754-2, DIN VDE0472 part 813 (FRNC)
t
Generic cable specifications
EN 187000: IEC 60794- 1&2, EN 188000:IEC 60793- 1&2
CONSTRUCTION Cable core
Tight-buffered fiber (TB) 900um
Strain relief elements
non-metallic (aramid)
Cable jacket
halogen-free and flame-retardant material
Color of jacket
orange for multi-mode, yellow for singlemode
CABLE CHARACTERISTICS Number of fibers (n)
2 to 12
Approx. Outer diameter of cables
4.0 mm-7.5 mm
Approx Weight
24 kg/km-45 kg/km
Minimum bending radius
20 x D [where D, overall diameter of cable]
Max. Tensile strength (Long term) Max. Crush resistance (Long term)
800N 300 N/dm
Operating temperature
-30°C to +70°C
Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
18
Indoor Cables Zip cord
APPLICATION Superiortec’s zipcords are ideal to be used as patch cables in distribution systems as well as for connecting terminals. The outer jacket is made of LSZH material. Highly flexible and having small diameters make them the perfect solution to make the desired patch cords.
t
Flame retardancy
IEC 60332-3
t
Smoke density
IEC 61034
t
Halogen-free
IEC 60754-2, DIN VDE0472 part 813 (FRNC)
t
Generic cable specifications
EN 187000: IEC 60794- 1&2, EN 188000:IEC 60793- 1&2
CONSTRUCTION Cable core
Tight buffered fiber (TB) 900um
Strain relief elements
non-metallic (aramid)
Cable jacket
halogen-free and flame-retardant material
Color of jacket
orange for multi-mode, yellow for singlemode
Fiber Optic Products & Solutions
STANDARDS COMPLIANCE
Other colors are available upon request
CABLE CHARACTERISTICS Number of fibers (n)
2
Approx. Outer diameter of cables
Depends on the jacket
Approx Weight
5.8 kg/km-17.5 kg/km
Minimum bending radius over flat side
30mm (Static), 60mm (Dynamic)
Max. Tensile strength (Long term) Max. Crush resistance (Long term)
400N 200 N/dm
Operating temperature
-30°C to +70°C
Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
19
Indoor/Outdoor Cables Tight Buffered, with Glass Yarn and LSZH Sheath
APPLICATION Superiortec’s Indoor/Outdoor fiber cables are non-metallic, flexible and light, that can be used both inside (LSZH jacket) and outside buildings (enhanced tensile load). Suitable for installations in cable ducts, on cable trays or in cable conduits.
STANDARDS COMPLIANCE t
Flame retardancy
IEC 60332-3
t
Smoke density
IEC 61034
t
Halogen-free
IEC 60754-2, DIN VDE0472 part 813 (FRNC)
t
Generic cable specifications
EN 187000: IEC 60794- 1&2, EN 188000:IEC 60793- 1&2
CONSTRUCTION Cable core
Tight buffered fiber (TB) 900um
Strain relief elements
non-metallic and water blocking Glass Yarn
Cable jacket
halogen-free and flame-retardant material
Color of jacket
Blue
strenght cabel(glass yarns)
LSZH Sheath
CABLE CHARACTERISTICS Number of fibers (n)
Up to 12
Outer diameter of cables
Max.5.5mm
Cable Weight Minimum bending radius
Max.29 kg/km 20 x D [where D, overall diameter of cable]
Max. Tensile strength (Long term) Max. Crush resistance (Long term)
1100N 800 N/dm
Operating temperature
-30°C to +70°C
Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
20
Tight buffered optical fibers
Indoor/Outdoor Cables Central Tube, with Glass Yarn and LSZH Sheath
APPLICATION Superiortec’s Indoor/Outdoor fiber cables are non-metallic, light and flexible that can be used both inside (LSZH jacket) and outside (Enhanced tensile load) buildings. Suitable for installations in cable ducts, on cable trays or in cable conduits.
FIRE PERFORMANCE Flame retardancy IEC 60332-1
CONSTRUCTION Cable core
Central tube Jelly filled
Strain relief elements
non-metallic and water blocking Glass Yarn
Cable jacket
halogen-free and flame-retardant material
Color of jacket
Blue
Jelly
Optical fibers
Loose tube
Fiber Optic Products & Solutions
no toxic and corrosive fumes
Glass yarn
LSZH Outer Sheath
CABLE CHARACTERISTICS Number of fibers/tube Outer diameter
Up to 12 Approx.7.5mm
Minimum bending radius (Dynamic)
20 x D [where D, overall diameter of cable]
Max. Tensile strength (Long term)
1000N
Operating temperature
-30°C to +70°C
Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
21
Indoor/Outdoor Cables Multitube, with Glass yarn and LSZH Sheath
APPLICATION Superiortec’s Indoor/Outdoor fiber cables are non-metallic and can be used both inside (LSZH jacket) and outside buildings (enhanced tensile load). Suitable for installations in cable ducts, on cable trays or in cable conduits.
FIRE PERFORMANCE Flame retardancy IEC 60332-1 no toxic and corrosive fumes
CONSTRUCTION Cable core
Central strength member with stranding gel filled loose tubes and if necessary fillers
Armouring
Strengthened water-blocking E-glass yarn,features non-metallic strain relief elements and rodent protection
Cable jacket
halogen-free and flame-retardant material
Color of jacket
Blue
Optical fibers Loose tube jelly filled Central strength member E-Glass yarn
LSZH Outer Sheath Filler rod
CABLE CHARACTERISTICS Number of fibers/tube
12
Number of tubes+fillers Outer diameter range
12 12-16.5mm
Minimum bending radius (Dynamic)
20 x D [where D, overall diameter of cable]
Max. Tensile strength (Long term)
1500N
Operating temperature
-40°C to +70°C
Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
22
Outdoor Cables Central Tube, with Glass Yarn and PE Sheath
APPLICATION Superiortec’s Outdoor fiber cables are light in weight, flexible and non-metallic for the backbone. Suitable for installations in cable ducts or on cable trays.
FIRE PERFORMANCE Jacket is halogen-free No toxic and corrosive fumes
Cable core
Central tube Jelly filled
Strain relief elements
non-metallic and water blocking Glass Yarn
Cable jacket
PE
Color of jacket
Black
-HOO\ 2SWLFDO)LEHUV /RRVHWXEH *ODVV\DUQ
Fiber Optic Products & Solutions
CONSTRUCTION
/6=+2XWHUVKHDWK
CABLE CHARACTERISTICS Number of fibers/tube
Up to 12
Outer diameter Minimum bending radius (Dynamic)
Approx.8mm 20 x D [where D,
Max. Tensile strength (Long term)
1000N
Operating temperature
-30°C to +70°C
Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
23
Outdoor Cables Central Tube, Corrugated Steel Armored with Glass Yarn and PE Sheath
APPLICATION Superiortec’s Outdoor steel armored fiber cables are robust to withstand the tough site conditions for the backbone areas. Suitable for installations in cable ducts, on cable trays or direct buried.
FIRE PERFORMANCE t
Jacket is halogen-free
t
No toxic and corrosive fumes
CONSTRUCTION Cable core
Central tube Jelly filled
Armouring
water blocking and strain relief Glass Yarn, and corrugated steel tape as rodent protection
Cable jacket
PE
Color of jacket
Black
-HOO\ 2SWLFDO)LEHUV /RRVHWXEH *ODVV\DUQ /6=+2XWHUVKHDWK
CABLE CHARACTERISTICS Number of fibers/tube Outer diameter
Up to 12 Approx.8.5mm
Minimum bending radius
20 x D [where D, overall diameter of
Max. Tensile strength (Long term)
1000N
Operating temperature
-30°C to +70°C
Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
24
Outdoor Cables Multitube, with Glass yarn and PE Sheath
APPLICATION Superiortec’s non-metallic Outdoor fiber cables are robust for primary cabling and backbone areas. Suitable for installations in cable ducts or on cable trays.
FIRE PERFORMANCE t
Jacket is halogen-free
t
No toxic and corrosive fumes
Cable core
Central strength member with stranding gel filled loose tubes and if necessary fillers. Cable core filled with water-blocking gel
Strain relief elements
non-metallic Yarn
Cable jacket
PE
Color of jacket
Black
Optical fibers Loose tube jelly filled Central strength member
-HOO\
Core filling Wrapping tape
2SWLFDO)LEHUV /RRVHWXEH *ODVV\DUQ
Yarn
Fiber Optic Products & Solutions
CONSTRUCTION
PE outer sheath Filler rod
/6=+2XWHUVKHDWK
CABLE CHARACTERISTICS Number of fibers/tube Number of tubes+fillers
12 12
Outer diameter range Minimum bending radius (Dynamic)
12-16.5mm 20 x D [where D, overall diameter of cable]
Max. Tensile strength (Long term)
1500N
Operating temperature
-40°C to +70°C
Fiber specification and color coding: Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
25
Outdoor Cables Multitube, Corrugated Steel Armored with Glass yarn and PE Sheath
APPLICATION Superiortec’s steel armored Outdoor fiber cables are robust for primary cabling and the backbone. Suitable for installations in cable ducts, on cable trays or directly buried.
FIRE PERFORMANCE t
Jacket is halogen-free
t
No toxic and corrosive fumes
CONSTRUCTION Cable core
Central strength member with stranding gel filled loose tubes and if necessary fillers. Cable core filled with water-blocking gel
Armoring
strain relief Glass Yarn, and corrugated steel tape as rodent protection
Cable jacket
PE
Color of jacket
Black
Optical fibers
Loose tube jelly filled Central strength member
-HOO\ Core wrapping
2SWLFDO)LEHUV Filling compound
/RRVHWXEH Steel tape
*ODVV\DUQ /6=+2XWHUVKHDWK
CABLE CHARACTERISTICS Number of fibers/tube
12
Number of tubes+fillers Outer diameter range
12 12-16.5mm
Minimum bending radius (Dynamic)
20 x D [where D, overall diameter of cable]
Max. Tensile strength (Long term)
1500N
Operating temperature
-40°C to +70°C
Fiber specification and color coding : Fibers are in accordance to ITU-T Recommendations Color codes are in accordance to IEC or Telcordia
26
PE outer sheath
Order Number Coding
CABLE TYPE I = INDOOR A = OUTDOOR U = UNIVERSAL
CABLE CONSTRUCTION
CORE TYPE
CORE TYPE UT = UNITUBE TB = TIGHT BUFFERED MT = MULTI TUBE
N
X
M
NxM N = # OF TUBES; NOTE: N=01 INCASE OF UT & TB M = # OF FIBER
OUTDOOR 01 = UNITUBE, DIELECTRIC, E-GLASS, PE 02 = UNITUBE, CORRUGATED STEEL, E-GLASS, SINGLE PE 03 = UNITUBE, CORRUGATED STEEL, E-GLASS, DOUBLE PE 04 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, SINGLE PE 05 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, DOUBLE PE 06 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, SINGLE PE 07 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, DOUBLE PE 08 = MULTITUBE, DIELECTRIC, E-GLASS, JELLY-FILLED, SINGLE PE 98 = MULTITUBE, DIELECTRIC, JELLY-FILLED, SINGLE PE, ARAMID YARN 09 = MULTITUBE, DIELECTRIC, E-GLASS, JELLY-FILLED, DOUBLE PE 10 = MULTITUBE, CORRUGATED STEEL, E-GLASS, JELLY-FILLED, SINGLE PE 11 = MULTITUBE, CORRUGATED STEEL, E-GLASS, JELLY-FILLED, DOUBLE PE INDOOR/OUTDOOR 12 = UNITUBE, DIELECTRIC, E-GLASS, LSZH 13 = UNITUBE, CORRUGATED STEEL, E-GLASS, SINGLE LSZH 14 = UNITUBE, CORRUGATED STEEL, E-GLASS, DOUBLE LSZH 15 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, SINGLE LSZH 16 = MULTITUBE, DIELECTRIC, E-GLASS, DRY, DOUBLE LSZH 17 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, SINGLE LSZH 18 = MULTITUBE, CORRUGATED STEEL, E-GLASS, DRY, DOUBLE LSZH 19 = TIGHT BUFFERED, LSZH, INDOOR 20 = TIGHT BUFFERED (BREAKOUT), ARAMID YARN, LSZH SPECIAL TYPES 30 = SWA, TIGHT BUFFERED 31 = SWA, LOOSE TUBE 40 = ADSS
FIBER TYPE
FIBER TYPE A = G.652B B = G.652D C = G.657A
D = OM1 E = OM2 F = OM3
Fiber Optic Products & Solutions
CABLE TYPE
27
Special Cables Fiber strength memebers Fibers
Indoor Drop Cable (Flat)
LSZH sheath
for FTTH Application
CHARACTERISTICS AND APPLICATIONS t
Suitable for short distances in buildings
t
Small size and bending radius
t
Easy to install and terminate
t
Flame retardant LSZH outer sheath
t
Two parallel non-metallic strength members, fiber reinforced plastic (FRP)
t
In compliance with EU ROHS
TENSILE STRENGTH
CRUSH RESISTENCE
MIN. BEND RADIUS
Short term
70N
Short term
1000N
Dynamic
30mm
Long term
30N
Long term
300N
Static
15mm
ENVIRONMENTAL PROPERTIES
PHYSICAL PROPERTIES
FIBER COUNT TYPE
Installation Temperature
-5°C ~ +40 °C
Dimensions
3.1mmx2.0mm
Operation Temperature
-20°C ~ +70 °C
Cable weight
9.8 Kg/Km
2-core SM G.657A (refer to specs below)
Color
Beige g
ORDERING INFORMATION GJFZY-2 2-F Drop Cable SM, LSZH, Beige
SM G.657A FIBER-TRANSMISSION PROPERTIES Attenuation Coefficient 1310nm
≤0.35
dB/km
Fiber PMD
≤0.20
ps/(km)1/2
1550nm
≤0.21
dB/km
Fiber PMD Link Value PMDQ, (m=20, Q=0.01%)
≤0.1
ps/(km)1/2
1625nm
≤0.24
dB/km
Zero Dispersion Wavelength
1300~1324 nm
1383nm
≤0.32
dB/km
Zero Dispersion Slope
≤0.091
1285-1330nm Max Attenuation Minus 1310nm Attenuation
≤0.04
dB/km
Geometrical Properties
1525-1575nm Max Attenuation Minus 1550nm Attenuation
≤0.04
dB/km
Cladding Diameter
125±0.7
μm
Attenuation Discontinuity@1310nm1550nm
≤0.03
dB
Core/Cladding Concentricity Error
≤0.5
μm
Attenuation Uniformity@1310nm1550nm
≤0.05
dB/km
Cladding Non-Circularity
≤1
%
Bidirectional Attenuation@1310nm1550nm
≤0.04
dB/km
Coating Diameter
245±5
μm
Macrobending@1550nm (10 turns,φ30mm)
≤0.20
dB
Coating Non-Circularity
≤3
%
Macrobending@1625nm (10 turns,φ30mm )
≤0.8
dB
Coating/Cladding Concentricity Error
≤12
μm
Macrobending@1550nm (1 turn,φ20mm)
≤0.75
dB
Fiber Curl
≥4
m
Macrobending@1625nm (1 turn,φ20mm )
≤1.5
dB
Bend radius
≥15
mm
Mechanical Properties
Mode Field Diameter 1310nm
(8.4~8.8 ±0.4 μm
Fiber Proof test Level
≥1.02
%
1550 nm
10.4±0.8
Fiber Strip Force Peak Value
1.3—8.9
N
μm
Fiber Strength
Cut-off Wavelength Fiber Cut-off Wavelength
1150~1330
μm
Fiber Weibull 50% Strength
≥4000
Mpa
Cable Cut-off Wavelength
≤1260
μm
Fiber Weibull 15% Strength
≥3050
Mpa
Dynamic Fatigue Parameter (Nd
≥20
Chromatic Dispersion
28
ps/(nm2.km)
Dispersion @1288nm-1339nm
-3.5~3.5 ps/(nm.km)
Environmental Properties
Dispersion @ 1271nm -1360nm
-5.3~5.3 ps/(nm.km)
Temperature Cycling (-60~-85),Induced Attenuation (1310nm and 1550nm)
≤0.05
dB/km
Dispersion@1550nm
≤17.5
ps/(nm.km)
Water Soak (30 days @23),Induced Attenuation (1310nm and 1550nm)
≤0.05
dB/km
Dispersion@1625nm
≤22
ps/(nm.km)
Accelerated Ageing(30 days@85,85%RH),Induced Attenuation (1310nm and 1550nm) ≤0.05
dB/km
19” Rack-Mount Fiber Panels Solutions Removable Front Panels Chassis
The Superiortec removable front panels chassis is a 19 inch 1U sliding panel in two parts: one sliding tray and one front panel, which accommodates the optical adaptors. The flexibility of the two piece construction allows you to maintain a stock of the chassis and then attach a suitable front panel as required.
TECHNICAL SPECIFICATIONS Characteristic 1U (44.4mm) 482mm 204mm 2.1kgs 3kgs
Packaged Dimensions
450mm x 55mm x 260mm
IP Rating Suitable for adaptor type Mounting adjustment range Cable entry 20mm Cable entry 25mm Material Meterial thickness Material coating
IP20 All 50mm 2 2 Cold Rolled Steel 1.2mm Electro Static Powder Coating
Colour
Black RAL 9004 Grey RAL 7035
Fiber Optic Products & Solutions
Element U Size Width Depth Net weight Packaged weight
Operating Temprature
-40°c to + 50°c
Compliant to
RoHS, Reach / SVHC
Designed in accordance with
TIA/EIA 568.C, ISO/IEC 11801, EN 50173, IEC 60304, IEC 61754, EN 297-1
FEATURES AND BENEFITS
REMOVABLE FRONT PLATES FEATURES
t
Recessed panel option
t
Up to 48 fibres in 1U
t
No exposed screws
t
Multiple Adaptor options available
t
Screen printed for easy labelling
t
individually labeled ports
t
45° working angle
t
Rear cable entry options
t
Panel numbers and rack number identification labels
t
High quality finish, no sharp edges
ORDERING INFORMATION FT01R RP24SCL RP24DLCL
Fiber tray 1U, sliding, can accommodate removable front panels Removable front panel, loaded with 24 simplex SC adapters Removable front panel, loaded with 24 Duplex LC adapters
29
19” Rack-Mount Fiber Panels Solutions Sliding Patch Panel
Superiortec offers an innovative, robust 1U sliding patch panel. This panel has been designed to accept up to 48 fibres housed within a 1U space. These panels include an internal mounting plate to install the Adaptors giving a reduction in the bend radius of the exiting patch cords, and also a more astatically pleasing installation. With the ability to use a full array of Adaptor types offering a flexible solution to the end user, enabling them to incorporate a multi functional panel which allow easy access during installation or re-work with no disturbance of the existing cable or fibres.In the addition to the array of adaptors, the panel also offers multiple cable entry solutions, up to 4 standard cable entry points for, loose tube, tight buffer, preterminated and steel tape armoured cable.Each panels has integrated strength member tie positions also with the additional removable plate at the rear of the panel allows the installation of steel tape armoured cable.
TECHNICAL SPECIFICATIONS Elements U Size Width
Characteristics 1U (44.4mm) 482mm
Depth Net weight
205mm 2.5 kgs
Packaged weight Packaged dimensions
3 kgs 450mm W X 55mm H x 260mm D
IP rating Suitable for Adaptor type
IP20 SC Simplex/LC Duplex
Number of ports Cable Entry 20mm
24 2
Cable entry 25mm Mounting Adjustment range
2 50mm
Material
Cold- rolled steel
Material thickness
1.2mm
Material coating Colour Operating temperature
Powder coating RAL 9004 -40°c to +50°c
Designed in accordance with
TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304, IEC61754,EN297-1
Compliant to
RoHS, Reach/SVHC
FEATURES AND BENEFITS t
Up to 48 fibres in 1U
t
individually labeled ports
t
Sliding for easy access to fibers
t
45°open working angle
t
Multiple Adaptor options available
t
Accepts loose tube, distribution and pre terminated cables
t
24 Adaptor positions
t
ROHS, REACH SvHC and UL rated
t
Recessed Adaptor positioning
t
Fits standard 19”
ORDERING INFORMATION FP24SCUR
Sliding Fiber Panel 19”, 24 Simplex SC / 24 Duplex LC, Unloaded, 1U
For other types and number of adapters, panels are available on request.
30
AP4U Sliding Patch Panel with 12LGX Slots
Superiortec offers an innovative, robust, 4U sliding panel with a smoked plexi glass hinged front door. This panel has been designed to accept up to 12 LGX style assemblies. With the ability to use a full array of adapter types, this panel offers a solution to the end user, enabling them to incorporate a multi functional chassis that allows easy access during installation.
FEATURES AND BENEFITS t t t t t t
6QUP-(9DPNQPOFOUTJO6 wBOEw3BDLNPVOUBCMF 4MJEJOHUSBZGPSFBTFPGJOTUBMMBUJPO *OUFHSBUFE4QSVOHMPBEFEUSBZTUPQ 6QUPYöCSF.51DBTTFUUFT .VMUJQMFBEBQUFSPQUJPOTBWBJMBCMF
t t t t t t
4QMJDJOHPQUJPOBWBJMBCMF 4JEF1BUDIDPSEFYJU )JOHFEGSPOUQMFYJHMBTTEPPS 3FNPWBCMFUPQDPWFS "DDFQUTMPPTFUVCF EJTUSJCVUJPODBCMFBOE.51USVOLDBCMF 30)4 3&"$)4W)$
4U Modular Patch Panel Chassis U Size 4U (17.78cm)
Fiber Optic Products & Solutions
Width 43.18cm Net weight 24 kgs Packaged weight 24.9 kgs Packaged dimensions 52cm W x 45cmm H X 55cm D Suitable for Adaptor type LGX / MTP Cassettes Number of module positions 12 Material Cold- rolled steel Material thickness 16 Gauge Powder coating Colour RAL 9004 Operating temperature -40°c to +50°c Designed in accordance with TIA/EIA 568.C, ISO/IEC 11801, EN50173, IEC60304,IEC61754,EN297-1 Compliant to RoHS, Reach/SVHC
APPLICATION Data centres, premise installations, telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication and telecommunication networks Indoor applications
ORDERING INFORMATION $38
/6&6&$6
6OLGLQJ3DWFK3DQHOZLWK/*;6ORWV
3RUW$GDSWHU3ODWH 8QORDGHG 6&6,1*/(02'(6,03/(;
/6&0&$6
3RUW$GDSWHU3ODWH 8QORDGHG 6&08/7,02'(6,03/(;
//&6&$6
3RUW$GDSWHU3ODWH 8QORDGHG /&6,1*/(02'('83/(;
//&0&$6
3RUW$GDSWHU3ODWH 8QORDGHG /&08/7,02'('83/(;
/
%/$1.3/$7(
Note: Adapters to be purchased separately as per page 36
31
APW3 Lockable Wall Box with 4LGX Slots
Superiortec offers a wide range of indoor wall mounted splice enclosures the AMW enclosure offers a compact solution to the end user. This enclosure has been designed to accept up to 4 LGX style assemblies. With the ability to use a full array of adapter types this enclosure offers a flexible solution to the end user, enabling them to incorporate a multi functional enclosure that allows easy access during installation or rework with no disturbance of the existing cable or fibres. In the addition to the array of adaptors the enclosure also offers multiple cable entry solutions, fibre cable can be spliced or pre terminated solutions, making this enclosure one of the most flexible on the market.
FEATURES AND BENEFITS t t t t t t t
6QUP-(9DPNQPOFOUT XBMMNPVOUBCMF .VMUJQMFBEBQUFSPQUJPOTBWBJMBCMF 4QMJDJOHPQUJPOBWBJMBCMF -PDLBCMF)JOHFEEPPS "DDFQUTMPPTFUVCF EJTUSJCVUJPODBCMFBOE 30)4 3&"$)4W)$
4 Slot Wall Box Height 17.78cm Width 43.18cm Depth 35.56cm Net weight 24 kgs Packaged weight 24.9 kgs Packaged dimensions 52cm W x 45cmm H X 55cm D Suitable for Adaptor type LGX / MTP Cassettes Number of module positions 4 Material Cold- rolled steel Material thickness 16 Gauge Powder coating Colour RAL 9004 Operating temperature -40°c to +50°c
APPLICATION Data centres, premise installations, telecommunication networks Ethernet, Fibre Channel, ATM, LAN, MAN and WAN Data communication and telecommunication networks Indoor applications
ORDERING INFORMATION APW3
32
AM Style Lockable Wall Box
Fiber Patch Cords Series
Superiortec High Performance Patchcords are a range of “best in class” patchcords employing highest grade components, manufacturing processes and test methods that offer excellent performance for demanding telecommunications and data centre applications. High Performance Patchcords are used were low loss budgets are essential and may be considered for splice replacement.
FEATURES AND BENEFITS t
Conform to IEC, EIA-TIA, and Telecordia performance requirements
t
End face geometry result data included
t
RoHS, REACH & SvHC compliant
Cable Material
LSZH
Strength Member
Aramid
Crush
1000N
Operating Temperature
-20 to 60 ˚C
Secondary Buffer Diameter (2.0mm, 2.4mm and 3.0mm)
900±50 μm
Secondary Buffer Diameter (1.6mm and 1.8mm)
600±50 μm
Colour
SM – Yellow MM – Orange(OM1,OM2) MM – Aqua (OM3, OM4)
Fiber Optic Products & Solutions
CABLE SPECIFICATIONS
ORDERING INFORMATION D XXX yy yy 12 L Configuration: Duplex Fiber Type: 652 – OM1 502 – OM2 503 – OM3 801 - SM Connector Type (end A) SC LC SC-APC Connector Type (end A) SC LC SC-APC length (meters) Jacket Type: LSZH
33
Fiber Pigtails Series
Superiortec pigtails are used to in telecom, datacom networks and also in high speed netwroks. The pigtail buffer conforms to IEC, EIA TIA and Telecordia standards. The pigtails are terminated with standard Superiortec connector which gives optimum optical performance.
FEATURES AND BENEFITS t
SC, LC, ST, FC connectors (for SM and MM) and E2000 (for SM)
t
APC connector option for SM
t
Low smoke zero halogen (LSZH) buffer
t
900μm tight buffer or easy strip
t
Different connector performance range for specific application
t
Available in standard 12 colours as per IEC 60304
BUFFER SPECIFICATIONS Crush Operating Temperature
500 N/10dm -20 to 60 ˚C
Nominal buffer Diameter Max Tensile Load
900+50 μm 6N
ORDERING INFORMATION P XXX yy 12 L Fiber Type: 652 – OM1 502 – OM2 503 – OM3 801 - SM Connector Type: SC LC SC-APC length (meters) Jacket Type: LSZH
34
Fiber Connectors Series
Superiortec manufactures a range of SC and LC connectors suitable for various applications. SC connectors are used in most of the latest network applications and with less parts and a plastic body which offers an economical option. The LC connector is a small form factor fiber optic connector which helps to reduce the space on panels or outlets by 50%. It’s cost effective as it simplifies movements, additions and changes. The LC connector uses a 1.25mm ferrule which is half the diameter of the standard ferrule. The SC connectors are available in singlemode both PC and APC and in multimode PC. The LC connectors are available in singlemode both UPC and APC and in multimode UPC. The connectors come with standard boots suitable for 900μm, 2mm cable diameters (SC and LC) and 3mm cable diameters (SC).
FEATURES t
Comply with IEC 61754-4, IEC 60784-14 and TIA 604-3 (SC connector) and with IEC 61754-20 and TIA 604-10-A (LC connector)
t
The SC connector features a push-pull coupling mechanism for easy insertion and consistent connection and the LC has a compact design based on RJ45 style interface
t
Zirconia ceramic ferrule with high end Ultra Physical Contact (UPC) finish
t
Low insertion loss and back reflection
t
RoHS, REACH SvHC compliant
t
Available in standard colours and standard packaging
Fiber Optic Products & Solutions
The SC and LC connectors are available in standard colours including blue, green and beige.
MECHANICAL PROPERTIES CRITERIA Mechanical endurance Vibration Operating temperature
500 matings 10-55Hz, 0.75 amplitude -25 to +70, 12 cycles
EFFECT
CONFORMANCE
<0.2 dB change <0.2 dB change <0.2 dB change
IEC 61300-2-2 IEC 61300-2-1 IEC 61300-2-22
35
Fiber Adapters Series
Superiortec offers a range of quality adaptors which have high precision alignment sleeves for improved reliability and better reconnectability. The LC adaptors come with ceramic sleeves for singlemode and phosphor bronze sleeves for multimode. The housing is available in different colours with options for flange or flangeless body and metal, or inbuilt, clips.
FEATURES t
Comply with IEC 61754-4, -20, IEC 60784-14 standards
t
High precision alignment sleeve
t
Low insertion loss and improved reconnectability
t
RoHS, REACH SvHC compliant
t
SC type is available in simplex and duplex adaptors, LC type is available in simplex, duplex and quad adaptors
t
Other types of adapters are also available on request
TECHNICAL SPECIFICATIONS CERAMIC
PHOSPHORE BRONZE 0.15 dB
Insertion Loss (Typ)
0.1 dB
Mating Durability Operating temperature
500 -25 to +70, 12cycles
CONFORMANCE IEC 61300-3-4 IEC 61300-2-2 IEC 61300-2-22
ORDERING INFORMATION XXX 123 y zz ADA- Adapter CON- Connector Fiber Type: 652 – OM1 502 – OM2 503 – OM3 801 - SM Configuration: S – simplex D – Duplex Type: SC LC SC-APC
36
P 38
Intelligen PDUs P 40
Category 3 Products & Solutions
Standard Horizontal and Vertical PDUs
Category 6 Products & Solutions
Fiber Optic Products & Solutions
Power Distribution Units
Cable Managers Series
Power Distribution Units
37
Tools & Accessories
Standard Horizontal and Vertical PDUs
Providing power inside cabinets to sensitive appliances such as servers and networking equipment can be a delicate issue. The power distribution units (PDUs) range from Superiortec provides the reliable power extension that you need. It is designed based on international standards, with creative structure and reliable quality. It has passed safety tests, and thus given certifications by international authorities.
FEATURES AND BENEFITS Reliable output characteristics: socket sleeves are made from phosphor bronze, which is famous for its elasticity, wear resistance, diamagnetism and corrosion resistance. This ensures reliable contact and a single-pole pull-and-plug life of 5000 times plus, no loosing, no strike and reliable electric conductivity.
Elegant and practical appearance: Black color, master switch (with indicator) and Easy mounting
45 degree socket orientation: this unique socket orientation enables plugging bulky plugs next to each other, which can be difficult in other regular PDUs. Flexible application: 6-way rack mount or 10-way vertical mount
38
Power Distribution Units
Standard Horizontal and Vertical PDUs
STANDARDS t
RoHS
t
CE safety authentication
Digital Ammeter: the vertical mount PDU comes with digital Ammeter to show the current consumption, which is updated instantly.
ORDERING INFORMATION PWR6CSUKAH PWR10CSUKAV-I
19” Power Strip, 6-BS1363 (UK type) 13A 45-degree with Switch Power Strip, 10-BS1363 13A 45-degree with Switch and Ammeter, vertical mounting
Other socket types and numbers are available upon request
39
Intelligent PDUs
FEATURES AND BENEFITS The intelligent Power Distribution Unit (iPDU) is the world-advanced new generation network power distribution and monitoring device from Superiortec. The iPDU’s advanced technology delivers excellent performance and powerful functions, in a safe and reliable manner. In nutshell, the iPDU enables IT administrators and Datacenter supervisors to monitor, control and manage the power of many equipments in any cabinet of a given data room. All of this can be done over LAN or WAN, making it feasible to connect to any location all over the world.
MAIN FUNCTIONS t
System automatic alarm for the following cases: total load current, temperature and/or humidity exceed(s) limits, smog, door opening and waterlogging
t
Alarming methods:
t 8PSLJOHWPMUBHF
t
The light indicator and buzzer alarm in the iPDU panel
t 5PUBMMPBEDVSSFOU
t
The visual indicator on the Web interface and the buzzer in PC alarms
t -PBEDVSSFOUPGFBDIPVUMFU
t
Automatic E-mails to system administrator
t
Alarm information sent by SNMP
t
Daisy-chain, with master and 9 slaves at most
t
Logs record
t
User management
t
Accessing method: Web, SNMP (V1/V2/V3), Telnet and SSH
Through internet, the iPDU can remotely monitor, control and manage:
t (SPVQMPBEDVSSFOU
t 1PXFSPOPòTUBUFPGFBDIPVUMFU t 4FRVFOUJBMQPXFSPOPòPGUIFPVUMFUT t 4FRVFOUJBMQPXFSPOPòPGUIFHSPVQFEPVUMFUT t 5JNJOHQPXFSPOPòPGUIFPVUMFUT t 4ZTUFNPQFSBUJOHTUBUF t 5FNQFSBUVSF)VNJEJUZTUBUF t 4NPHTUBUF t %PPSPQFODMPTF t 8BUFSMPHHJOH
ORDERING INFORMATION The iPDU comes in different configurations, depending on the sockets number and type, access method, and mounting options. Our sales agents will be more than glad to assist you select the right configuration for your needs.
40
19” Cable Manager
Metal with plastic rings
Brush type
Full plastic with cover
Brush type with metal rings
Category 3 Products & Solutions
Full metal with cover P 42
Category 6 Products & Solutions
Fiber Optic Products & Solutions
Power Distribution Units
Cable Managers Series
Cable Managers Series
41
Tools & Accessories
19” Cable Managers Superiortec offers a wide range of cable management products, ranging from the light-weight, elegantly designed plastic rings type to the rugged, fully metal and covered type. Whether you need to organize small bundle of managed cables or fully conceal them for better overall rack look, Superiortec just has the right product to suit those needs.
FULL METAL WITH COVER
METAL WITH PLASTIC RINGS
BRUSH TYPE
FULL PLASTIC WITH COVER
BRUSH TYPE WITH METAL RINGS
ORDERING INFORMATION
42
CM01MC
1U Cable Manager, full metal with cover
CM02MC
2U Cable Manager, full metal with cover
CM01PR
1U Cable Manager, metal with plastic rings
CM01B
1U Cable Manager, brush type
CM01BMR
1U Cable Manager, brush type with metal rings
CM01PC
1U Cable Manager, full plastic with cover
Cable Managers Series
Tools & Accessories Accessories
P 44
Velcro tape Splicing heat-shrink sleeves Tools
P 45 110 punch down tool Modular crimp tool
Category 3 Products & Solutions
Fiber Optic Products & Solutions
Power Distribution Units
Tools & Accessories
Fiber termination kit
Category 6 Products & Solutions
Cable jacket stripper
43
Accessories
The Cable Ties from Superiortec offer a clean, reusable reliable product. The Velcro-type is a convenient and cost effective method to bundle wires and cables whether in telecom rooms or to be used around office spaces.
To protect fiber splices safely and efficiently, Superiortec provides the Heat shrink sleeves for that purpose. These sleeves are applied on fibers to be spliced and then heated over an oven or heat gun. The sleeves come in transparent standard color.
44
VELCRO
SPLICING HEAT-SHRINK SLEEVES
This high-quality punch down tool facilitates terminating data cables on the RJ-45 jacks. It comes with comfortable handle, and works with Cat5, Cat5e and Cat6 UTP/STP cables. It does not only terminate wire, but it also cuts off the excess wires in one step, resulting in efficient termination.
This crimping tool from Superiortec is used for terminating RJ45 plugs with four-pair, twisted cable to make patch cord assemblies. It can also be used for terminating a RJ12 or RJ11 plug with a three-pair or two-pair phone cable.
The cable stripper removes the outer sheath from most round data cables (up to 11mm in diameter) to prepare for termination. This tool is light-weight, small and easy to use: just insert cable and rotate the tool twice then remove cable for a quick and clean strip.
This fiber termination kit comes loaded with the high quality range of Superiortec Tools that facilitate fiber termination. All tools are packed into their own cut-foam compartment to keep them safe from damage, and all are presented in a robust and ruggedized case, ideal for such fragile equipment.
110 PUNCH DOWN TOOL
Tools & Accessories
Tools
MODULAR CRIMP TOOL
CABLE JACKET STRIPPER
FIBER TERMINATION KIT
The case includes Inspection Scope, Fiber Optic Stripper and crimping tool, Kevlar Scissors, Cable Ringing Tool, Universal Stripping Tool, Fluid Dispenser, Sin Bin, Polishing Pucks, 1” Yellow Syringe Tips and syringes, pack of Lint Free Tissue, Lapping Film, Glass Polishing Plate, Heat Cure Epoxy and Termination Oven (for heat cure kits) or Cold Cure Epoxy and activator (for cold cure kits).
45
EXTENDED PERFORMANCE/SYSTEM AND PRODUCT WARRANTY Superior Technologies FZ LLC offers two choices of warranty programs. The first warranty will cover the Component warranty which is a standard from the manufacturer, and the second will be the System warranty which will cover from installation to system support. 1. 15-Year Product/Component Limited Warranty certifies that all passive CAT 6 connecting hardware conform to the applicable TIA/EIA-568-C specifications, and all passive products will be free from defects in material and workmanship. This warranty extends to the original purchaser from 15 years from the date of purchase, provided the purchaser has invoice documentation or proof of purchase. This warranty does not cover the installed, system performance. 2. 25-Year Performance/System Limited Warranty certifies that all Superior Technologies passive connecting hardware, that has been installed by a certified Installer, will support all applications designed for data transmission over Category 6 or as applicable, and that these components will perform to the applicable channel and permanent link specifications of TIA/EIA 568-C.2 Clause 6 and ISO/IEC IS 11801 for passive cabling channels. They shall be free from defects in material and workmanship for at least 25 years from the date of purchase. The limited warranty covers all Category 6 Superior Technologies products, where such products were installed in a registered and validated installation by a Certified Installer, at Superior Technologies sole discretion. The warranty will be processed should the installation meets the following: a. All links should be tested by recognized test equipments. b.
The testing for all nodes should be done on permanent links.
c.
The warranty application forms as well as other documents (please refer to the application form) should be submitted.
The following provisions apply to the above warranties. Superior Technologies will accept the liability to replace and or repair of any materials that has been damaged before installation of the materials with proper investigation which will be done by the Technical team of Superior Technologies. Any defective materials should be received by the company within 10days and replacement will be done within 20 days after the proper investigation and or subject to the availability of the items free of charge. If in any case, the reported defective materials happen to be working properly, the customer will be accountable for any incurred cost that Any damages arising due to the mishandling, misuse, abuse, neglect, accidental damage, alteration and wrong installation will be the SOLE RESPONSIBILITY OF THE CUSTOMER and Superior Technologies will not be liable for the LOSS OF PROFITS or INCIDENT, INDIRECT or OTHER CONSEQUENTIAL DAMAGES due to aforesaid reason. PROGRAM REGISTRATION AND VALIDATIONS To register a project in the 25-Year Performance/System Limited Warranty, the CERTIFIED INSTALLER must submit the completed warranty application form and the additional required project documentation as stated in the application form to SUPERIOR TECHNOLOGIES for validation. Once SUPERIOR TECHNOLOGIES have deemed the project valid, Superior Technologies will issue an authenticated and numbered certificate. Where the Certified Installer is no longer available, please contact SUPERIOR TECHNOLOGIES.
46
connectivity solutions
CONTACT DETAILS UAE Address Superior Technologies and Services JLT P.O Box 309084, Dubai Tel: +971 4 3912370 Fax: +971 4 3918651
[email protected] www.supeirortec.net UK Registered Office Superior Technologies (UK) Limited SA14 6SN Llanelli, Dyfed Wales www.superior-uk.com
superi
rtec
