Transcript
WRT4826 CUSTOM WOOD EPA BURNING FIREPLACES
Our name is our promise.
TRADITIONAL
“Impressive” is the only way to describe these massive wood-burners. Designed for large, custom applications the WRT4826 Custom Wood Burning Fireplaces feature a 30” tall opening and beautiful brick panels that mimic a masonry fireplace. 2
FEATURED WRT4826 with White Herringbone Textured Panels and clean face panel kit.
EXCLUSIVE FEATURES
Circulating louvered design features ceramic glass for optimum heat transfer (optional clean-face kit available)
EPA phase II certified and Washington State approved wood heater
3.8 cubic foot insulated firebox that accepts up to 20” log size for increased performance
White herringbone textured refractory panels with integrated ash lip and decorative cast iron log retainer
Air combustion control for variable heat output with air boost for faster wood ignition during startup
Catalytic combustor for maximum performance with bypass control
Includes insulated outside air kit (required for use)
75% thermal efficiency and heats up to 2,500 square feet*
Efficient air wash system that keeps glass clean
Cast iron door with heat resistant door handle that stays cool to the touch
Optional heat activated 200 CFM UZY-5 variable speed blower for time-delayed heat distribution
Dual ducted gravity kit (required when using clean-face kit) and/or thermostatically controlled forced air kit available (3 maximum outlets)
Durable high temperature paint finish
Uses SCIL (ACBI) 7” air cooled wood burning chimney
Uses SCIL (ASHT / HT6103 / S-2100 / HT6000) 7” insulated wood burning chimney
20 year limited warranty
OPTIONAL ACCESSORIES
DECORATIVE GRILL OPTIONS
Black Arch Door (Required)
(Optional)
Del Sol, Diamante or Strada Louver Kits (One Required)
Clean-Face Kit
Rigid Fire Screen
Double Duct Gravity Kit (Required for Clean-Face Kit)
Forced Air Kit
Heat Activated Blower
Variable Speed Switch for Blower
Del Sol
Diamante
CATALYTIC COMBUSTION The WRT4826 fireplace’s catalytic combustion helps increase efficiency and save energy. It produces more heat using less
Strada
wood and gives you longer burn times for heating buildup by 90%, thereby greatly minimizing a major cause of chimney
ENGINEERING FEATURES AND SPECIFICATIONS
fires. Engineered with a secondary burn and catalytic combustion for burn-off gases, the WRT4826 fireplace offers maximum energy efficiency while consuming less fuel. It’s an
7-inch Chimney Gravity Kit (optional)
investment that pays for itself over time. Insulation
Convection Air Outlet
Flue Exhaust
Catalytic Air Combustion
4
1
Catalyst
Secondary Air Combustion
Air Wash System Radiant Heat
Combustible Air
Cast-Iron Log Retainers Blower (optional) Convection Air Inlet
5
Easily Adjustable Air Control
Integrated Ash Drawer
Outside Air intake
3 2
BURN RATES* 800°F –
1 Single door provides an unobstructed panoramic view of the flames 2 Dual-handle ash drawer with lid 3 Air intake lever allows better combustion control, producing from 10,000 to 70,000 BTU/hr. 4 Bypass control overrides the catalyst combustor restrictive passageway when opening the door 5 White Herringbone Textured Panels
600°F –
400°F –
200°F –
1
2
3
4
5
6
7
8
HOURS *Results obtained by burning 25 lbs. of dry maple wood. (one hour pre-heating)
13 3/8"
22 11/32"
23 1/2" 1 1/2"
APPLIANCE SPECIFICATIONS
INSTALLATION SPECIFICATIONS
Front View
WARNING: The outlet grills should not be installed fac i ng upward through a floor. Danger of burns can result if grills in floor are stepped on.
47-1/8” 1197mm 45-3/32” 1145mm
19” 483mm
22-1/2” 572mm
Outlet Grill
38” 965mm
Top View
10’30"(3.1m) 10' MAX. 11-1/4" Max.
3-3/4"
1"
11-1/4"
06"
06"
9 3/8" 22 11/32"
13 3/8"
10-3/8" 14-3/8"
23 1/2"
24-1/2"
1 1/2"
Right Side View Knockout for Knockout forced air for (side or forced rear)air
10’ (3.1m) 10' Max. MAX.
13” 13” 13" xxx 330mm) 13" (330mm
7" ASHT wood burning chimney
30 1/16" 11 1/4"
Outlet Grill
Maintain at least 6-1/2” (160 mm) clearance from the outlet grill framing to a combustible ceiling, side Knockout wall or mantel. for gravity ducting
Left Side View Knockout for
14-7/8"
14-7/8" 47-1/8” 1197mm
forced Knockout for air forced (sideairor rear)
Knockout for forced air
14-7/8"
45-3/32” 1145mm
19” 483mm
47-1/8"
38-1/8"
22-1/2” 572mm
36-1/16"
45-3/32"
Glass Viewing Area (W x H)
38” 965mm
Firebox Interior (W x H x D+)
Junction box access
3-13/16" 2-15/16"
13-9/16"
PRODUCT SPECIFICATIONS
14-7/8"
Outside air intake
Maximum Log Size
20"13-9/16"
EPA Rating As with any fireplace, this appliance is extremely hot during operation. Read and understand all operating instructions before using this appliance. For further information, consult your dealer.
Junction box
3.8
38"
BTU’s Heating Capacity (up to)
7" 4.0 grams/hr 70,000 2,500 sq. ft.
Local conditions, such as elevation and choice of fuel will affect overall appearance of the fire and heating performance. Performance can also vary with home design and insulation, ceiling height, accessories chosen and appliance location.
Thermal Efficiency
Diagrams, illustrations and photographs are not to scale — consult installation instructions. Product designs, materials, dimensions, specifications, colors and prices are subject to change or discontinuance without notice.
Blower
200 CFM
Weight
403 lbs.
+Measured in front of door
Visit us online
© 2014 Innovative Hearth Products 785375M 07/14
SuperiorFireplaces.us.com
38-1/8"
access 22" x 20" x 15"
Interior Cubic Feet Chimney Size
IMPORTANT NOTES:
22-1/2" x 19"
75%
2-15/16"
