Transcript
SUPERNOVA the HUGGABLE light
SUPERNOVA the HUGGABLE light
DEFLATING Open Inner Fixture Deflation Valve(fig. 4) and Outer Inflation Valve(fig. 5) and allow air to fully escape. For rapid deflation attach valve to pump using the deflate extension, this will draw the air out quickly. When fully deflated close valve. WHEN TRANSPORTING: 1. Disconnect the power connector from the power supply. 2. Deflate the SUPERNOVA light following the DEFLATING directions above. 3. Fold the inflatable reversing the unfolding process. Use a clean flat surface. 4. Always place the inflatable in its package when deflated. 5. Do not roll the SUPERNOVA around the power supply 6. Do not place the SUPERNOVA near sharp objects 7. Handle with care
UNFOLDIT!
TAKEIT!
PATCH INSTRUCTIONS: 1. Clean the area around the hole or tear. You can use rubbing alcohol or soap and water to clean the area; just ensure that no dirt or debris is present near the hole. 2. Cover the hole with a rag or your hand and inflate. You can not put a patch on a deflated object because once you fill it with air, the material expands; the patch will not properly seal the hole if deflated. 3. Peel the back off of the patch, then place it over the hole and rub it a few times to flatten it out smoothly over the surface of the inflatable. Ensure that you place the patch onto the hole, keeping the hole centered within the patch. This way you'll create a tight seal, and no air will escape.
HUGIT!
INFLATEIT!
ACCESSORIES: sold separately SUPERNOVA BASE Allows your SUPERNOVA to be free standing, or transforms into a mounting bracket when you hang it!
• ALWAYS inflate LED Tube before SUPERNOVA fixture to prevent overheating. • Do not let inflatable products come in contact with sharp, pointed objects. • Fill with cold air only. NEVER USE HAIR DRIER TO INFLATE this could cause melting. • Do Not Over Inflate. Bursting items can cause serious injury. Inflate the SUPERNOVA LIGHT until most of the wrinkles in the material are gone and it feels firm to the touch. • NEVER leave a light fixture on and unattended for long uninterrupted period of time.
WARNING: • Not for use by children 3 and younger. Adult supervision required for inflation and deflation. • Keep away from open flames, heaters, and other hot objects. Do not smoke near the inflatable light. • This inflatable light is not for use in water. It is not a life saving device, not a personal flotation device, or water toy. • This inflatable light is not a toy. Do not stand, walk, jump or use sharp objects on the inflatable light. This can result in serious injury or damage to the SUPERNOVA Light.
WHAT’S IN THE BOX:
supernova light
IMPORTANT INFORMATION
power supply
SUPERNOVA Prov. Patent #70352-00003 © 2010 Scale 1:1. All Rights Reserved.
remote/control box
pump
www.scale1to1.com
AIR MAINTENANCE: Air temperature and weather do affect the air pressure in inflatable products. In cold weather your SUPERNOVA LIGHT will lose some pressure due to the fact that the air will contract. If this occurs, you may want to add a little air to improve your INFLATABLE LIGHT’s performance. However, in hot weather, the air will expand. You must let some air out to prevent the INFLATABLE LIGHT from failing due to overpressure. You should avoid exposing your INFLATABLE LIGHT to extreme temperatures (hot or cold).
SUPERNOVA the HUGGABLE light
USING YOUR SUPERNOVA LIGHT 1. CONNECTING THE POWER SUPPLY (fig. 6) a. connect the power supply to the control box. b. connect the control box to the SUPERNOVA Light using Power Connection. c. plug in wall outlet
Hang Tab
Outer Fixture Valve Inner Fixture Deflation Valve
Top-Up Valve
Inner Fixture Inflation Valve
Power Connection
Power Connection
Hang Tab
Figure 1 - Bottom View
Figure 2 - Top View
2. THE REMOTE CONTROL See guide below for functionality.
INSTRUCTIONS UNPACK AND UNFOLD SUPERNOVA LIGHT, LAY ON A CLEAN FLAT SURFACE. STEP #1. INFLATE INNER FIXTURE VALVE (fig. 3-4) Inflate the internal bladder through Inner Fixture Inflation Valve located at bottom end of the light fixture. Using the mid-size fill nozzle, inflate until the internal bladder is fully inflated, firm and straight. Inner Fixture Deflation Valve Inner Fixture
No
Patterns
1
Static red
2
Static blue
3
Static purple
4
Static green
5
Static yellow
Figure 6
Remarks
No 8
Brightness is adjustable,Speed is unadjustable.
9 10
6
Static cyan
11
7
Static white
12 13 14
Inner Fixture Inflation Valve
Patterns Three-color jumpy changing Seven-color jumpy changing Three-color gradual changing Seven-color gradual changing R/B crossfade B/G crossfade G/R crossfade
Remarks Speed and brightness are adjustable Speed is adjustable,brightness is unadjustable Speed is adjustable,brightness is unadjustable
3. INSTALLATION (fig. 7): - HANG IT: TWO WAYS TO HANG YOUR SUPERNOVA FIXTURE a. Use the integrated Hang Tabs(fig. 1). Use an approved cord or chain connected to the hang tabs to suspend the fixture. The power supply must be supported or suspended separately by an independent cord. Always check that there is no tension on the power cord. b. Use the SUPERNOVA BASE unit sold separately. Figure 3
Figure 4
STEP #2. INFLATE OUTER FIXTURE VALVE (fig. 5) Inflate the outer inflatable through Outer Inflation Valve located at bottom end of the light fixture. Using the mid-size fill nozzle, inflate until the inflatable is vvfully inflated, firm and straight.
- LEAN IT: Simply lean your supernova against the wall of your preference with the power supply on the floor. Always assure their are no sharp materials, objects or nails on the wall before leaning. - STAND IT: See instructions included with SUPERNOVA BASE stand. *THE SUPERNOVA LIGHT CAN BE LAID ON THE FLOOR, BUT IT’S NOT TO BE CONSIDERED A SEATING ITEM.
Inflation Valve #2
LEAN IT! STAND IT!
Figure 5 WARNING: DO NOT OVER INFLATE. e. If fixture requires more air, use Top Up Valve located at the Top of your SUPERNOVA (fig. 2).
Figure 7
HANG IT!
