Preview only show first 10 pages with watermark. For full document please download

Suzuki Dt2.2 техническая информация

   EMBED

Share

Transcript

DT2.2 SPECIFICATIONS Item K5 Data DF2.2 Unit PRE-FIX 00222 DIMENSIONS & WEIGHT Overall length (front to back) Overall width (side to side) Overall height S L Weight S L Transom height S [Trim position: 3] L mm (in) mm (in) mm (in) mm (in) kg (lbs) kg (lbs) mm (inch type) mm (inch type) 605 (23.8) 220 (8.7) 900 (35.4) 1027 (40.4) 10.0 (22.0) 12.0 (26.5) kW (PS) r/min r/min 1.6 (2.2) 4700 – 5300 1050 ± 50 428 (15) 555 (20) PERFORMANCE Maximum output Recommended operating range Idle speed (in-gear) POWERHEAD Engine type Number of cylinder Bore Stroke Total displacement Compression ratio Standard spark plug Intake system Exhaust system Cooling system Starting system Choke system Ignition system Throttle control 2-stroke 1 43.0 (1.69) 37.8 (1.49) 55 (3.4) 6.1 BR5HS Reed valve Above prop exhaust Water cooled Manual Manual Transistorized ignition Throttle lever mm (in) mm (in) cm3 (cu in) :1 NGK 1/2 Item Data DT2.2 Unit FUEL & OIL Fuel Suzuki highly recommends that you use alcohol-free unleaded gasoline with a minimum pump octane rating of 87 ((R + M)/2 method) or 91 (Research method). However, blends of unleaded gasoline and alcohol with equivalent octane content may be used. Premixture of gasoline and oil at 100:1 (For South Africa and commercial markets, use a premixture of gasoline and oil at 50:1) Mixing ratio Fuel tank capacity (Built-in tank) Engine oil L (US/Imp. gal) SUZUKI CCI OIL, SUZUKI Outboard Motor Oil or NMMA (National Marine Manufactures Association) certified TC-W3TM oil. SUZUKI Outboard Motor Gear Oil (SAE #90 hypoid gear oil) Gear oil Gearcase oil amounts 1.2 (0.32/0.26) S type L type ml (US/Imp. oz) ml (US/Imp. oz) 70 (2.4/2.5) 120 (4.1/4.2) BRACKET Trim angle Number of trim positions Maximum tilt angle Degrees 4.0 – 17.5 4 80 Degrees LOWER UNIT Reversing system Transmission Reduction system Gear ratio Drive line impact protection Propeller Pilot Forward Bevel gear 12 : 23 (1.917) Shear pin Blade × Diam. (in) × Pitch (in) 3 × 7-3/8 × 4-1/2 (A400) 3 × 7-3/8 × 4-3/4 (A500) 3 × 7-3/8 × 5-3/8 (A510) 2/2