Transcript
SVA-15 15” two-way active speaker |
PRO AUDIO
ACOUSTIC SPECIFICATIONS Power Handling Program Peak Nominal Impedance Average Sensitivity Calculated Maximum SPL / 1m Program Peak
8Ω 98 dB @ 1w/1m 126 dB continuous 129 dB 132 dB
Frequency Response (-6dB)
48 - 19000 Hz
Manufacturing Consistency
± 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB) Amplifier Module Recommended Low Cut Full Range: With Sub: Preset EQ’s
SVA-15
600 w RMS (EIA 426A standard) 1200 w 2400 w
80° x 60° Powersoft Digimod 1500 IS, Class D power amplifier module 40 Hz 18 dB/oct Butterworth 60 to 140 Hz 24 dB/oct Linkwitz-Riley x4
Low Frequency Driver
Fane Transducer, 8Ω impedance, 15” (380 mm) diameter, 3” high temperature voice coil on glass fibre former
High Frequency Driver
1” (25 mm) exit, 1.7” (44 mm) voice coil, Heat treated Titanium diaphragm
| 15” two-way active speaker
APPLICATIONS The SVA-15 is a self powered loudspeaker suitable for near field main PA reinforcement with subwoofers, portable system or permanent installation, wall, stand, or suspension, monitoring for vocals, delay fill or under balcony complementary diffusion.
ADDITIONAL SPECIFICATIONS Flying Hardware Pole Mount
35 mm Metal
Connectors
2 XLR (female + male), for mono input + link output
Cabinet
FEATURES Finish
• 600 w RMS power handling (EIA 8 hours Standard) • Equipped with premium Fane Drivers • Elliptic 80° x 60° low resonance glass fibre horn • Void-free birch plywood cabinet, tongue and groove assembly • Touring grade HardTex coating with black matt finish • Powered by Powersoft amplification
12x M8 points with internal metal brackets
CNC made with tongue and groove assembly, 18 mm void-free birch plywood, exterior grade Proprietary HardTex coating, black matt
Cabinet Size (HxWxD)
708 x 442 x 446 mm
Shipping Carton Size (HxWxD)
772 x 506 x 510 mm
Weight
Optional Accessories
30 kg net 32 kg gross M8 Eye bolt kit
• 4 DSP preset support on associated electronics
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
SVA-15
dB SPL
PRO AUDIO
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
15” two-way active speaker |
0.0 50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS The loudspeaker shall be a active, 2 way type consisting of one 15”
shall be 122dB continuous / 128dB peak. Nominal impedance shall be
(380mm) direct radiating reflex loaded low frequency transducer and one
8Ω. The multi-angled enclosure shall be of a void free multi-laminate birch
1” (25mm) exit / 1.7” (44mm) voice coil HF compression driver that is
ply construction with sealed internal bracing, 35mm metal pole mount
mounted on a constant directivity elliptic glass fibre horn that provides
and threaded M8 inserts for suspension. The screws shall be stainless
a nominal coverage angle of 80° (horizontal) by 60° (vertical). The
steel 316L with 200 hours coating per ASTM-B117. The finish shall be
frequency response shall be 54 to 18500Hz in half space with less than
a black matt multi layer HardTex water based painting with hardness
± 3dB variation. Low and high frequency sections shall be integrated by
higher than 75Hv. The front of the enclosure shall be protected by a black
an internal 2kHz active crossover network with Right Phase technology
matt dual layer coated (powder + acrylic) 1.5 mm thick steel acoustically
and 18dB/oct slopes. Power handling shall be 600W RMS, 2400W peak
transparent grille. Dimensions shall be (HxWxD) 708 x 442 x 446 mm and
by EIA 426A standard (8 hours pink noise) average wideband (200-
Weight 30kg.
16000Hz). Efficiency on axis shall be 98dB/1W/1m and maximum SPL
© 2013, Fane International Ltd. Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice. Any specifications or product images in this document are deemed correct at the time of publication.
Rev.170713
