Preview only show first 10 pages with watermark. For full document please download

Swage Grounding L11557 Swage Grounding Conductor Range

   EMBED

Share

Transcript

Swage Grounding L11557 Swage Grounding Conductor Range Notes 1. Swage Grounding products will be marked with cable equivalent size. Other permissible connections are shown in the table below. 2. All Swage Grounding parts with compression barrels must be stamped with the target conductor offering on that size. 3. Stamping should include: • AFL • AFL No. • Target conductor for both runs and/or taps • Die size 4. Use table below to determine the copper cable equivalent target size. For sizes without a Copper cable listed, use intended rod size (i.e. 75C mark as 3/4" Cu Rod). Part Number Product Stamp GROUNDING SW2TC SWGC 20 17 Part Family Die Code Tap 1 and 2 Cable Code SW2TC SWGC 20 17 Part Family Die Code Tap 1 Cable Code for Largest Conductor CABLE EQUIVALENT DMC AFL CODE CABLE CODE 06G 2 04G 4 02G 6 AFL SWGC2017 3/0 CU 45TD20 20 13 Die Code (Leave blank if same as Tap 1) Tap 2 Cable Code for Smallest Conductor COPPER (MCM OR AWG) #6 #4 #2 002 13 1/0-2/0 003 004 17 21 3/0 4/0 COPPERWELD CABLE (STRANDING/AWG) 1/#6 1/#4 and 3/#10 1/#2, 3/#8 and 3/#9 3/#5, 3/#6, 3/#7, 7/#8, 7/#9 and 7/#10 7/#7 and 7/#6 7/#5 025 25 250 19/#9 030 035 040 625 045 682 050 053 750 914 950 100 30 35 40 62S 45 75C 50 50 75S 100C 100S 100 300 350 400 — 450 — 500 500 Ropelay — — — 1000 19/#8 — 19/#7 — — — 19/#6 19/#5 — — — — www.AFLglobal.com or 800-890-8878 AFL SWGC2017-2013 TAP 1 3/0 CU TAP 2 1/0-2/0 CU 45TD20 COPPERCLAD ROD (NOM OD) — — — STEEL ROD OR REBAR (OD OR REBAR SIZE) — — — — — — — 1/2" plain and threaded 1/2" sectional with 9/16" thread — 5/8" plain and threaded — — — 3/4" plain and threaded — — — 1" plain and threaded — — #3 Rebar — 1/2" plain and #4 Rebar — — — 5/8" plain and #5 Rebar — — — — 3/4" plain — 1" plain — © 2016, AFL, all rights reserved. PP-3-00803, Revision 0, 8.11.16 Specifications are subject to change without notice. 28