Preview only show first 10 pages with watermark. For full document please download

Switchable K-band Upconverter Uc-20a221a9

   EMBED

Share

Transcript

ITS ELECTRONICS INC. ISO 9001:2008 AND SAE AS9100C CERTIFIED MICROWAVE COMPONENTS AND SUBSYSTEMS Half Watt Switchable K-Band Block Upconverter MODEL: UC-20A221A9-2740S INTERFACE PERFORMANCE L-BAND INPUT: Frequency 950 to 2450 MHz Connector 50 Ohm SMA Female Return Loss ≥ 14 dB into 50 Ohm Maximum Input Power without Damage +10 dBm K-BAND OUTPUT: The upconverter contains two internal LO sources switchable by a mechanical toggle switch. Frequency, with LO 1 20.25 to 21.75 GHz Frequency, with LO 2 20.45 to 21.95 GHz Connector WR-42 (Grooved) Return Loss ≥ 12 dB Power @ 3dB GCP ≥ 27 dBm (0.5 Watt) 3rd Order Intercept ≥ 30 dBm POWER SUPPLY: Voltage +15 VDC Current 2 A Maximum DC Input Connector Solderable Pin LO SWITCHING: Mechanical Switch. Solderable Pin Optional. REMOTE MONITOR AND CONTROL: Optional The upconverter provides a frequency translation of an Lband input to a K-band output. It features high linearity and low phase noise performance. TRANSFER CHARACTERISTICS: Frequency Sense No Inversion Small Signal Gain @ FC 40 to 45 dB Gain Variation 5.5 dB ptp Maximum over temperature Gain Flatness 5.5 dB ptp Maximum over the frequency bands specified 2.0 dB ptp over any 125 MHz 1.0 dB ptp over any 50 MHz Group Delay Variation 4 ns ptp Maximum over any 50 MHz Image Rejection 60 dB min. Output Mute 60 dB min. on unit fault 2×IF + LO Spurious -40 dBc Maximum Other In-band Spurious -60 dBc Maximum Out-of-band Spurious -50 dBc Maximum LO Leakage -60 dBm Maximum Output SSB Phase Noise -72 dBc/Hz @ 1 kHz -82 dBc/Hz @ 10 kHz -92 dBc/Hz @ 100 kHz -102 dBc/Hz @ 1 MHz -112 dBc/Hz @ ≥10 MHz INTERNAL REFERENCE CHARACTERISTICS: -6 Frequency Variation ±1 x 10 over -40 to 55 °C MECHANICAL Enclosure Rating Cooling Dimensions IP-65 Air Convection 5.8” × 5.0” × 2.2”, without mounting tabs 6.9” × 5.0” × 2.2”, with mounting tabs 5 lbs. Maximum White paint, other colors available Weight Finish ENVIRONMENTAL Operating Temperature Non-Operating Temp. Humidity Altitude -40 to +55 °C -50 to +70 °C Up to 100% Condensing Up to 10,000 Feet AMSL Specifications are Subject to Change without Notice Errors & Omissions Excepted Response, Innovation, Craftsmanship B-3280 Langstaff Road, Vaughan, Ontario, CANADA L4K 5B6 Tel: (905) 660-0405 Fax: (905) 660-0406 E-mail: [email protected] www.itselectronics.com