Transcript
www.hertzaudiovideo.com
SX 250D
2400W
Technical Specifications Component Size
SPL Dual Coil Subwoofer mm
250 (10”)
W peak W continuous
2400 600
Impedance
Ω
2+2
Frequency response
Hz
34 ÷ 800
Sensitivity
Power Handling
dB/SPL
90.5
Outer Ø
mm
269
Mounting Ø
mm
232
Total depth
mm
187
Mount. depth
mm
160
Total driver displacement
l
2
Magnet size Weight of one speaker Voice coil Ø Magnet Cone X-mech*
mm
180
kg
11,6
mm
65
Triple magnet, High density flux ferrite Pressed Paper Cone mm
23
*X-mech maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.
1. High thermal dissipation and magnetic permeability plates; provide constant, even flux. 2. Large triple magnet, for perfect control under high power, very high excursion conditions for high SPL performance. 3. Aluminium voice coil wound on four-layer former; for unheard-of thermal capability. 4. Back plate venting holes, for optimal thermal dissipation. 5. Back Vented Spider Support; for perfect symmetry under high excursion while providing increased thermal dissipation. 6. High current, tin-plated terminals. 7. Tinsel lead wires are integrated in the spider; for maximum reliability and conductivity. 8. Double Symmetrical Spider System, for unprecedented control. 9. Wide-wave, resin-bonded fibre spider; for consistent parameters and reliability. 10. High density foam surround; for linear movement, even under extreme excursion. 11. Water-repellent, pressed paper cone.
Electro-Acoustic Parameters * 187 160
80
64
48
232
32
16
0
*Coils in series
- 62018 Potenza Picena (MC) Italy - Tel. +39 0733 870870 - Fax +39 0733 870880 - www.elettromedia.it
10/03/2009
210 14 4,0 51 3,09 1,17 11,00 147 0,06 20,81 0,42 0,44 8,00 90,5
269
D mm Xmax mm Re Ω Fs Hz Le mH@1kHz Le mH@10kHz Vas l Mms g Cms mm/N BL T-m Qts Qes Qms Spl (1m/2,83V) dB
www.hertzaudiovideo.com
SX 300D
3200W
Technical Specifications Component Size Power Handling
SPL Dual Coil Subwoofer mm
300 (12”)
W peak W continuous
3200 800
Impedance
Ω
2+2
Frequency response
Hz
28 ÷ 700
Sensitivity
dB/SPL
91
Outer Ø
mm
318
Mounting Ø
mm
284
Total depth
mm
198
Mount. depth
mm
170
Total driver displacement
l
2,9
Magnet size Weight of one speaker Voice coil Ø Magnet Cone X-mech*
mm
180
kg
11,8
mm
65
Triple magnet, High density flux ferrite Pressed Paper Cone mm
23
*X-mech maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.
1. High thermal dissipation and magnetic permeability plates; provide constant, even flux. 2. Large triple magnet, for perfect control under high power, very high excursion conditions for high SPL performance. 3. Aluminium voice coil wound on four-layer former; for unheard-of thermal capability. 4. Back plate venting holes, for optimal thermal dissipation. 5. Back Vented Spider Support; for perfect symmetry under high excursion while providing increased thermal dissipation. 6. High current, tin-plated terminals. 7. Tinsel lead wires are integrated in the spider; for maximum reliability and conductivity. 8. Double Symmetrical Spider System, for unprecedented control. 9. Wide-wave, resin-bonded fibre spider; for consistent parameters and reliability. 10. High density foam surround; for linear movement, even under extreme excursion. 11. Water-repellent, pressed paper cone.
Electro-Acoustic Parameters * 198 170
80
64
48 284
32
16
0
*Coils in series - 62018 Potenza Picena (MC) Italy - Tel. +39 0733 870870 - Fax +39 0733 870880 - www.elettromedia.it
10/03/2009
253 14 4,0 46 3,06 1,14 20,00 202 0,06 21,60 0,48 0,51 8,20 91
318
D mm Xmax mm Re Ω Fs Hz Le mH@1kHz Le mH@10kHz Vas l Mms g Cms mm/N BL T-m Qts Qes Qms Spl (1m/2,83V) dB
www.hertzaudiovideo.com
SX 380D
4000W
Technical Specifications Component Size Power Handling
SPL Dual Coil Subwoofer mm
380 (15”)
W peak W continuous
4000 1000
Impedance
Ω
2+2
Frequency response
Hz
25 ÷ 600
Sensitivity
dB/SPL
92
Outer Ø
mm
391
Mounting Ø
mm
351
Total depth
mm
208
Mount. depth
mm
181
Total driver displacement
l
3,5
Magnet size Weight of one speaker Voice coil Ø Magnet Cone X-mech*
mm
180
kg
12,2
mm
65
Triple magnet, High density flux ferrite Pressed Paper Cone mm
23
1. High thermal dissipation and magnetic permeability plates; provide constant, even flux. 2. Large triple magnet, for perfect control under high power, very high excursion conditions for high SPL performance. 3. Aluminium voice coil wound on four-layer former; for unheard-of thermal capability. 4. Back plate venting holes, for optimal thermal dissipation. 5. Back Vented Spider Support; for perfect symmetry under high excursion while providing increased thermal dissipation. 6. High current, tin-plated terminals. 7. Tinsel lead wires are integrated in the spider; for maximum reliability and conductivity. 8. Double Symmetrical Spider System, for unprecedented control. 9. Wide-wave, resin-bonded fibre spider; for consistent parameters and reliability. 10. High density foam surround; for linear movement, even under extreme excursion. 11. Water-repellent, pressed paper cone.
*X-mech maximum mechanical excursion: it indicates the motion range in the speaker linear functioning area, in both ways.
208 181
80
64
48
32
16
0
*Coils in series - 62018 Potenza Picena (MC) Italy - Tel. +39 0733 870870 - Fax +39 0733 870880 - www.elettromedia.it
10/03/2009
320 14 4,0 43 3,17 1,17 45,00 274 0,05 20,70 0,67 0,70 9,30 92
351
D mm Xmax mm Re Ω Fs Hz Le mH@1kHz Le mH@10kHz Vas l Mms g Cms mm/N BL T-m Qts Qes Qms Spl (1m/2,83V) dB
*
391
Electro-Acoustic Parameters
