Transcript
SXWS9557FM
Front-Mounted SX Panel Shower • 14 gauge panel construction • Standard recessed soap dish • All units factory tested for proper operation
Specifications Material All cabinet materials, including interior piping are Type 304 stainless steel. The fixture is made from heavy gauge stainless steel with seamless welded surfaces.
Construction Panel Recessed soap dish, showerhead, and push buttons are secured from back of panel for vandal-resistant installation. Vandal-resistant stainless steel screws are used to anchor panel to wall frame at six points. Valving Unit features a choice of valves for a tempered water application. Valves are accessible from the front for maintenance. See unit selection chart for valve offerings. Showerhead Bradley “SX” severe service 2.5 GPM showerhead has a fixed direction spray. Spray pattern is adjustable through orifice with 1/8" Allen wrench.
Finish
All exposed stainless steel surfaces have a #4 polished satin finish. Brass showerhead and push buttons are triple chrome plated.
Wall Anchoring
Mounting frame has pre-drilled holes to assist in locating wall anchors. Suitable wall anchors and screws to be furnished by contractor. Access panels are attached to showers with vandal and rust resistant screws. Fixture requires wall cut out for installation and maintenance. Some field assembly is required.
Standard Equipment
Unitized stainless steel shower panel with "SX" showerhead, recessed soap dish, choice of valves, and rust-resistant hardware for walls up to 12" thick. SXWS9557FM
Model SXWS9557FM
Front-Mounted SX Shower Panel
Required Selections Valve Assembly (select one): ASTM Air Single Temp Metering Valve TTST TouchTime® Single Temp Electronic Metering Valve NV No Valve
Page 1 of 2 2/21/2010 This information is subject to change without notice. Bradley_SecurityShower_SXWS9557FM
© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com
SXWS9557FM
Front-Mounted SX Panel Shower Model SXWS9557FM
(mm)
WALL OPENING
24" (610)
22-5/8" (575)
9-1/8" (232)
Minimum Wall Depth: Frame Only = 2.0" (51) ASTM = 4-1/2" (114) TTST=3.0" (76)
53-7/16" (1357) to Finished Floor
10-1/2" (267)
72" (1828) to Finished Floor
64-3/4" (1646) to Finished Floor
52-3/4" (1340) to Finished Floor
Page 2 of 2 2/21/2010 This information is subject to change without notice. Bradley_SecurityShower_SXWS9557FM
© 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com
