Transcript
Symphony™ countertop and wall mount ice and water dispenser with integral Maestro™ Chewblet® ice icemaker To select dispense method:
Add -S after model number for SensorSAFE™ dispensing or -L for lever dispensing.
Countertop models with (A) air- or (W) water-cooled icemakers 25CT400A/W – 115 V, 60 Hz, 25 lbs (11 kg) storage C25CT400A/W – 220 V, 60 Hz, 25 lbs (11 kg) storage E25CT400A/W – 230 V, 50 Hz, 25 lbs (11 kg) storage 50CT400A/W – 115 V, 60 Hz, 50 lbs (23 kg) storage C50CT400A/W – 220 V, 60 Hz, 50 lbs (23 kg) storage E50CT400A/W – 230 V, 50 Hz, 50 lbs (23 kg) storage
Wall mount models with (A) air- or (W) water-cooled icemakers Note: Available with SensorSAFE dispensing only. 25HT400A/W-S – 115 V, 60 Hz, 25 lbs (11 kg) storage C25HT400A/W-S – 220 V, 60 Hz, 25 lbs (11 kg) storage E25HT400A/W-S – 230 V, 50 Hz, 25 lbs (11 kg) storage 50HT400A/W-S – 115 V, 60 Hz, 50 lbs (23 kg) storage C50HT400A/W-S – 220 V, 60 Hz, 50 lbs (23 kg) storage E50HT400A/W-S – 230 V, 50 Hz, 50 lbs (23 kg) storage
25 Series 50 Series
Countertop and wall mount ice and water dispenser with removable air- or water-cooled icemaker in top of dispenser. Stainless steel exterior with plastic trim. Stainless steel frame. Storage capacity of 25 lbs (11 kg) or 50 lbs (23 kg). Produces and automatically loads up to 400 lbs (181 kg) of Chewblet compressed nugget ice in a 24-hour period. Add -S after model number for SensorSAFE dispensing or -L for lever dispensing. _____________________________________________________
Convenient, sanitary, user-friendly dispensing • Labor-saving, sanitary automatic load • Available with lever or infrared SensorSAFE dispensing • Quick shut-off reduces the amount of wasted ice
SensorSAFE dispensing option offers improved sanitation and convenience • Infrared sensing reduces chance of cross-contamination • SensorSAFE not recommended for use with clear containers or for applications in direct sunlight
Space-saving design • 21" (534 mm) width requires less space than other models of similar capacity • Zero side clearance required for ventilation
Chewblet ice – perfect for healthcare and foodservice • Soft, chewable compressed nugget ice • Consumer-preferred over cubes • Slow melting, maintains drink temperature
High performance Maestro icemakers • • • •
R404A refrigerant with zero ozone depletion potential (ODP) Stainless steel evaporator and auger Energy and water efficient Quiet production; no noisy harvest cycles
Warranty • 3 years parts and labor • 5 years compressor parts
Accessories • • • •
Chilled water option (item# AFH20CHIL2550) Water filter kit (item# 00130229) High capacity water filter kit (item# 00978957) Base stand (for models 25CT400A/W, C/E25CT400A/W 50CT400A/W, C/E50CT400A/W) (item# AF50BASESTD) • SafeCLEAN™ environmentally responsible icemaker cleaner (item# 00132001) • Drain pan assembly for wall mount models (item# AFH25WBASE)
25CT400A-S (countertop with SensorSAFE “-S” dispensing)
Wall mount model* (SensorSAFE dispensing only)
JOB: _______________________________________________ * No drain pan. Drain pan available – contact factory.
ITEM: ______________________________________________
801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • +1 (610) 252-7301 Fax +1 (610) 250-0696 • www.follettice.com
Symphony™ countertop and wall mount ice and water dispensers with integral Maestro™ Chewblet® ice icemaker
25 Series 50 Series Front View*
Side View
21" (534 mm)
23.5" (597 mm)
Rear View
Ice production Air-cooled icemaker capacity/24 hrs. Ambient Air Temperature ˚F/˚C
air intake
plumbing connection knockout (internal 3/8" FPT connection)**
50 series 51.125" (1299 mm)
access panel 8.625" (219 mm)
80 27 397 180 389 177 380 173 347 158 313 142
70 21 454 206 435 198 417 190 385 175 354 161
100 38 273 124 270 123 266 121 247 112 227 103
90 32 335 152 329 150 323 147 297 135 270 123
lbs. kg. lbs. kg. lbs. kg. lbs. kg. lbs. kg.
Condenser Water Inlet Temperature ˚F/˚C
5.875" (150 mm)
3/4" FPT drain**
23" (585 mm)
8.75" (223 mm) 10.50" (267 mm) 14.75" (375 mm)
* Shown with lever dispensing (-L); infrared SensorSAFE dispensing (-S) available. ** Kit provided with all 230 V, 50 Hz and 220 V, 60 Hz models to connect to BSP water fittings.
Connections Countertop models: utilities connect through back or bottom. Back entry shown. Wall mount models: utilities connect through back. Wall mount models Deduct 3.625" (92 mm) from height and add 0.5" (13 mm) to depth shown. Wall mount bracket and SensorSAFE standard. Standard without drain pan. Drain pan available – contact factory. Clearances
F C 50 10 60 16 70 21 80 27 90 32
60 16 451 204 423 192 394 179 371 168 352 160
70 21 447 202 413 187 390 177 361 163 342 155
80 27 442 200 409 185 380 172 352 160 333 151
100 38 428 194 394 179 361 163 333 151 309 140
90 32 437 199 399 181 371 168 342 155 323 146
lbs. kg. lbs. kg. lbs. kg. lbs. kg. lbs. kg.
Energy consumption KWH per 100 lbs (46 kg) ice† Air-cooled
5.7
Water-cooled
5.5
† Air temp. 90 F (32 C); water temp. 70 F (21 C)
Air-cooled
Water-cooled
Required for ventilation
6" (153 mm) top
N/A
Recommended for service
12" (305 mm) top
12" (305 mm) top
Heat rejection data Model
Heat rejected in BTU/hr to air
See Dispenser Detail Sheet, form# 2075, for important installation information.
Electrical Electrical connection
Dispenser amperage
Circuit required
25CT400A/W, 50CT400A/W
115 V, 60 Hz, 1 phase
14 amps
20 amps
25HT400A/W, 50HT400A/W
115 V, 60 Hz, 1 phase
14 amps
20 amps
C25CT400A/W†, C25HT400A/W† C50CT400A/W†, C50HT400A/W†
220 V, 60 Hz, 1 phase
6.5 amps
15 amps
E25CT400A/W†, E25HT400A/W† E50CT400A/W†, E50HT400A/W†
230 V, 50 Hz, 1 phase
6.5 amps
15 amps
Model number
60 16 510 232 482 219 454 206 424 193 394 179
Water-cooled icemaker capacity/24 hrs.
Inlet Water Temperature ˚F/˚C
25 series 47.125" (1197 mm)
7' (2.1 m) power cord w/5-20 90° hospital-gradeplug (115 V models only)
Inlet Water Temperature ˚F/˚C
air exhaust
F C 50 10 60 16 70 21 80 27 90 32
to water
Air-cooled
5000
N/A
Water-cooled
1400
3600
Water consumption
12.6 gal (48 L) of potable water usage per 100 lbs (46 kg) of ice.
It is preferred that circuit be protected by a GFCI breaker. 7 ft (2.1 m) cord and NEMA 5-20 hospital-grade plug provided with each dispenser. If local code requires hard-wiring, separate disconnects also required. † Cord only. Ensure wiring is in accordance with all local codes.
Approximate shipping weight 310 lbs (141 kg) Specifications Ice and water dispenser to be Follett ® automatic load in (choose one) ___ countertop or ___ wall mount configuration, with ___ 25 lbs (11 kg) or ___ 50 lbs (22 kg) of storage. Environmentally responsible R404A icemaker to be (choose one) ___ air- or ___ water-cooled and to be removable for cleaning and maintenance. Dispenser frame and cabinet to be stainless steel with plastic trim. Icemaker to produce approximately 400 lbs (181 kg) of Chewblet compressed nugget ice at air temp. of 70 F (21 C), water temp. of 50 F (10 C). Icemaker to be equipped with printed circuit board and diagnostics to allow simplified servicing. Storage area to be insulated with non-CFC, high density, foamed-in-place polyurethane. 7 ft (2.1 m) cord and NEMA 5-20 hospital-grade plug provided (220 V/230 V models, cord only). Dispenser to be NSF, UL and cUL listed. 230 V models also CE compliant. Maestro, SafeCLEAN, SensorSAFE and Symphony are trademarks of Follett Corporation. Chewblet and Follett are registered trademarks of Follett Corporation, registered in the US. Follett reserves the right to change specifications at any time without obligation. Certifications may vary depending on country of origin.
801 Church Lane • Easton, PA 18040, USA Toll free (800) 523-9361 • +1 (610) 252-7301 Fax +1 (610) 250-0696 • www.follettice.com
115V only 115V only
230V only
© Follett Corporation Form #4005 09/11
