Transcript
Sync LED
Project Name Spec Type
Suspended
Notes
Direct/Indirect 4000K, 3400 lm
Order Guide
Some combinations of product options may not be available. Consult factory for assistance with your specification.
7406
LA
E
–
QG
–
–
–
E
–
–
Product Series & Type
Source & Color
Lumen Package
Optics
Run Length
Wiring
Voltage
Finish
Controls
Direct/Indirect
LA 4000K
E 3400 lm*
QG MesoOptics Lens with 80% Down Kit
04 4ft 08 8ft
1 1cct 3 1cct w/emergency wiring 7 1cct dimming (0-10V)
1 120V 2 277V
W White T Titanium Silver B Black C Custom Color
DS Daylight Response Sensor
E = Standard Driver See reverse for details.
1/16" (.0625")
Mounting Hardware
standard/flat
1.18" Upgrades
For details visit ledalite.com/response
*4ft nominal
Note: Downlight kits change lumen output. See reverse for details.
Consult website for complete list of available wiring options
Mount Type
Suspension Length
Consult separate mounting spec sheet for mount type options
Enter distance from ceiling to top of fixture in inches
Please indicate with check mark.
Sculpted EndCap
sculpted
1 9/16"
5 Year Total System Warranty Sync LED comes with a 5 year total system warranty, that covers the entire luminaire—including the LED board, driver and all fixture components—with world class support backed by Philips Ledalite.
Note: Some combinations of product options may not be available. © 2013 Philips Ledalite
Phone: 604.888.6811
Fax: 800.665.5332
Web: ledalite.com
8"
LED Product Partner
Filename 7406LAEQG.pdf 03 13
Photometry
Sync LED
MesoOptics Lens with 80% Down Kit
Report No. ITL75663 Efficacy 83.3 lm/W Total Lumens 2675 lm
CRI R9 Input Watts
Power Factor 0.93 @ 120 Peak/Zenith Ratio N/A:1 Peak Candela Value N/A @ N/A
83 21 31.9
Suspended - Direct/Indirect - 4000K, 3400 lm
Meets RP-1-04 recommendations for VDT-Normal spaces *IESNA LM-79-08 specifies the entire luminaire as the source resulting in a fixture efficiency of 100%.
Candela Distribution
180 135
Vertical Angle
135
90
90 1000 cd
45
45 0 45 90
0
19% Up / 81% Down Fixture photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM-79-08. Lumen maintenance of the LEDs used in this fixture has been tested by the LED manufacturer in accordance with IESNA LM-80-08 IES files for this and other photometric options can be downloaded online at ledalite.com
Additional Information Modules Module length excludes endcaps. Nominal mount spacing for individually mounted modules.
Mount Spacing* 4' 0" 8' 0"
Endcaps 1/16" (.0625")
* Refer to installation instructions for exact mount spacing
Upper Optics
Available in standard flat and sculpted versions.
80% Down Kit
standard/flat
1.18"
J
22.5
45
67.5
90
0 5 15 25 35 45 55 65 75 85 90 95
741 746 753 743 668 504 334 192 79 15 0 13
741 748 770 777 699 508 330 190 80 16 0 21
741 755 810 853 754 515 327 191 80 16 0 17
741 754 845 922 811 531 338 201 84 16 0 29
741 757 861 954 830 536 343 206 85 16 0 19
105 115 125 135 145 155 165 175 180
55 76 76 67 69 70 70 70 71
69 91 83 71 71 71 70 71 71
92 123 108 81 72 72 71 71 71
124 158 137 99 77 71 71 70 71
122 165 136 104 79 70 71 71 71
100% Down Kit
Zonal Lumens
27 96 120 97 66 47 33 20 7
sculpted
Fax: 800.665.5332
Web: ledalite.com
70
80 50
30
10
70
50
50 30
50
30
0 10
0
114 114 114 114 110 110 110 100 100 100 106 101 98 94 101 97 94 90 87 85 97 89 83 78 92 86 80 79 75 71 89 79 72 66 85 76 70 71 65 61 82 71 63 57 78 68 61 63 57 52 75 63 55 49 72 61 54 57 51 46 69 57 49 43 66 55 48 52 45 40 64 52 44 38 62 50 43 47 40 36 60 47 39 34 57 46 38 43 37 32 56 43 36 30 54 42 35 40 33 29 52 40 32 28 50 39 32 37 30 26
81 70 60 51 44 39 34 31 27 25 22
*Based on a floor reflectance of 0.2
Avg. Luminance (cd/m2) Vertical Angle 55 65 75 85
Horizontal Angle 0
45
90
5650 4408 2962 1670
5532 4385 2999 1781
5802 4730 3187 1781
Spacing Criteria 1.39 @ 0° 1.54 @ 90° N/A @ 180°
Due to continuing product improvements, Philips Ledalite reserves the right to change specifications without notice.
Housing 18 gauge cold-rolled steel, precision formed and welded.
Optical System The optical system is comprised of arrays of LEDs, edgelighting a low profile Light Guide panel. The Light Guide panel allows light to be coupled and transmitted through total internal reflection. The microstructured surface of the panel optimizes the light extraction to create a direct indirect distribution. Light is purified and controlled by MesoOptics film as it passes through the non-glare acrylic lens. Standard distribution is 70% up/30% down.
Electrical Factory pre-wired to section ends with quick-wire connectors. Phone: 604.888.6811
0 1 2 3 4 5 6 7 8 9 10
73 230 390 466 402 299 194 88 20
Lumen Maintenance At an ambient operating temperature of 25°C, the LED lumen maintenance expectation is L80 > 60,000h.
© 2013 Philips Ledalite
Ceiling:
RCR Wall: 70
Weight Maximum 3.5 lb/ft.
Optics G
0
Specifications
Module 4ft 8ft
Coefficients of Utilization (%)
Horizontal Angle
Mounting Tamper-resistant aircraft cable gripper provides infinite vertical adjustment capability. Aircraft cable, crimp and cable gripper are independently tested to meet stringent safety requirements. Endcaps Endcaps are diecast aluminum; available in flat (standard) or sculpted(optional). Driver Dimming: 0-10V - 5-100%. Output is Class 2 rated. Approvals Certified to UL, CSA and IES standards. Finish Standard finish is textured matte White, Black or Titanium Silver. Environment Rated for dry or damp locations in operating ambient temperatures of 0-40°C (32-104°F).
Filename 7406LAEQG.pdf 03 13
