Transcript
A typical application using System 7320
Vertical
7000M Chassis/ Power Supply
7000S Standby Power Supply
7000S Standby Power Supply
7320T
Horizontal
Satellite Receiver
7320R
Fiberoptic Cable
7320T-L
7320R
LNB Powering
sadna/graphic design 4/99 (p.A.B)
System 7320 - L-Band Fiberoptic Interfacilty Link
7000M Chassis/ Power Supply
Satellite Receiver
Fiberoptic Cable Antenna Site
Control Room
7320 - System Specifications RF Characteristics Frequency Range
950 - 1750 MHz (2150 MHz optional)
Flatness
± 2.5 dB over any 500 MHz BW (max.)
Input/Output Impedance
75 Ohm
VSWR
2:1 (max.)
Intermodulation Products
-40 dBc (max.)
Carrier to Noise (min.)
25 dB @ 36MHz/10 channels
Input Signal Range
-40 to -20 dBm total power
Output Signal Range
-45 to -15 dBm total power
Gain Control
adjustable ±10 dB
RF Connector
F type female
For longer distances contact Foxcom
Optical Characteristics
L-Band - 950 to 1750 MHz (2150 MHz available) Protocol transparent - transmits all video, audio, and data modulation formats Signal transmission up to 2 kilometers Manual Gain Control Both Rackmount and Standalone models are available SAT-LIGHT™ - Cost Effective Interfacility Links The System 7320 transmits an entire L-Band polarization over singlemode fiber from a satellite antenna to reception equipment up to 2 kilometers away while preserving signal quality. The System 7320 consists of an optical transmitter (7320T) which receives the L-Band signal from the LNB and an optical receiver (7320R) which connects to a satellite receiver. The 7320T and 7320R modules plug into a 7000M 3U chassis/power supply which enables the system to be expanded, accommodating up to 6 SAT-LIGHT™ modules.
The System 7320 transmits all satellite modulation schemes - digital or analog. The RF signal is directly modulated, adding virtually no phase noise to the original signal. The direct modulation, coupled with the 7320's RF circuitry, guarantees high signal quality. Manual Gain Control (MGC) at the transmitter site allows the system operator to maintain optimum operation over a wide range of input signal levels. At the receiver site MGC sets the RF output level. LEDs, back panel monitors, and alarms allow for system status monitoring and for interfacing with M & C systems. The transmitter unit can provide 15 VDC/350mA for optional LNB powering.
Foxcom Inc. 600 College Road East Princeton, New Jersey 08540 USA Tel: 609-514-1800 Toll Free: 1-877-FOXCOM1 Fax: 609-514-1881 Foxcom Ltd. Beck Science Center 8 Hartom Street, Har-Hotzvim P.O. Box 45092 Jerusalem 91450 Israel Tel:+972-2-589-9888 Fax:+972-2-589-9898 E-mail:
[email protected] Website: www.foxcom.com
Physical
Optical Wavelength
1310 nm ±10 nm
Chassis Capacity
6 plug-ins
Optical Power Output
-3 dBm (min.)
Chassis Size Rackmount
19" x 5.25" x 7"
Optical Connector
FC/APC
Standalone Size
4.9" x 4" x 1.4"
Plug-in Unit Size
5" x 4.8" x 1.6"
Power for Standalone
110 or 220 VAC. 60 Watts (max.)
Operating Temp. Range
-10˚C to 55˚C
Ordering Information Description
Order Code
Available Accessories
Order Code
Fiberoptic Transmitter - 950 - 1750 MHz
7320T
Chassis/Power Supply
7000M
Option - LNB Powering
add - L
Redundant Power supply
7000S
Option - 2150 MHz Extended frequency
add - 20
FC/APC 5m Jumper Cable
APC-J-5
7000 Fiberoptic Receiver - 950 - 1750 MHz
7320R
Asynchronous Data Link
7050-4
Option - 2150 MHz Extended frequency
add - 20
1:1 Redundant Switch
2000
32 db Broadband Amplifier
2100
110 VAC Standalone Power Supply
STD-110/PS
220 VAC Standalone Power Supply
STD-220/PS
Standalone Mechanical Adapter
STD-MA
All specs are subject to change wihout prior notice.
© Foxcom 1999. Doc. No. 13-002-13A
A typical application using System 7320
Vertical
7000M Chassis/ Power Supply
7000S Standby Power Supply
7000S Standby Power Supply
7320T
Horizontal
Satellite Receiver
7320R
Fiberoptic Cable
7320T-L
7320R
LNB Powering
sadna/graphic design 4/99 (p.A.B)
System 7320 - L-Band Fiberoptic Interfacilty Link
7000M Chassis/ Power Supply
Satellite Receiver
Fiberoptic Cable Antenna Site
Control Room
7320 - System Specifications RF Characteristics Frequency Range
950 - 1750 MHz (2150 MHz optional)
Flatness
± 2.5 dB over any 500 MHz BW (max.)
Input/Output Impedance
75 Ohm
VSWR
2:1 (max.)
Intermodulation Products
-40 dBc (max.)
Carrier to Noise (min.)
25 dB @ 36MHz/10 channels
Input Signal Range
-40 to -20 dBm total power
Output Signal Range
-45 to -15 dBm total power
Gain Control
adjustable ±10 dB
RF Connector
F type female
For longer distances contact Foxcom
Optical Characteristics
L-Band - 950 to 1750 MHz (2150 MHz available) Protocol transparent - transmits all video, audio, and data modulation formats Signal transmission up to 2 kilometers Manual Gain Control Both Rackmount and Standalone models are available SAT-LIGHT™ - Cost Effective Interfacility Links The System 7320 transmits an entire L-Band polarization over singlemode fiber from a satellite antenna to reception equipment up to 2 kilometers away while preserving signal quality. The System 7320 consists of an optical transmitter (7320T) which receives the L-Band signal from the LNB and an optical receiver (7320R) which connects to a satellite receiver. The 7320T and 7320R modules plug into a 7000M 3U chassis/power supply which enables the system to be expanded, accommodating up to 6 SAT-LIGHT™ modules.
The System 7320 transmits all satellite modulation schemes - digital or analog. The RF signal is directly modulated, adding virtually no phase noise to the original signal. The direct modulation, coupled with the 7320's RF circuitry, guarantees high signal quality. Manual Gain Control (MGC) at the transmitter site allows the system operator to maintain optimum operation over a wide range of input signal levels. At the receiver site MGC sets the RF output level. LEDs, back panel monitors, and alarms allow for system status monitoring and for interfacing with M & C systems. The transmitter unit can provide 15 VDC/350mA for optional LNB powering.
Foxcom Inc. 600 College Road East Princeton, New Jersey 08540 USA Tel: 609-514-1800 Toll Free: 1-877-FOXCOM1 Fax: 609-514-1881 Foxcom Ltd. Beck Science Center 8 Hartom Street, Har-Hotzvim P.O. Box 45092 Jerusalem 91450 Israel Tel:+972-2-589-9888 Fax:+972-2-589-9898 E-mail:
[email protected] Website: www.foxcom.com
Physical
Optical Wavelength
1310 nm ±10 nm
Chassis Capacity
6 plug-ins
Optical Power Output
-3 dBm (min.)
Chassis Size Rackmount
19" x 5.25" x 7"
Optical Connector
FC/APC
Standalone Size
4.9" x 4" x 1.4"
Plug-in Unit Size
5" x 4.8" x 1.6"
Power for Standalone
110 or 220 VAC. 60 Watts (max.)
Operating Temp. Range
-10˚C to 55˚C
Ordering Information Description
Order Code
Available Accessories
Order Code
Fiberoptic Transmitter - 950 - 1750 MHz
7320T
Chassis/Power Supply
7000M
Option - LNB Powering
add - L
Redundant Power supply
7000S
Option - 2150 MHz Extended frequency
add - 20
FC/APC 5m Jumper Cable
APC-J-5
7000 Fiberoptic Receiver - 950 - 1750 MHz
7320R
Asynchronous Data Link
7050-4
Option - 2150 MHz Extended frequency
add - 20
1:1 Redundant Switch
2000
32 db Broadband Amplifier
2100
110 VAC Standalone Power Supply
STD-110/PS
220 VAC Standalone Power Supply
STD-220/PS
Standalone Mechanical Adapter
STD-MA
All specs are subject to change wihout prior notice.
© Foxcom 1999. Doc. No. 13-002-13A
