Transcript
EC Type-Examination Certificate
Powered by TCPDF (www.tcpdf.org)
Product tested
Safety Laser Scanner (AOPDDR Type 3)
Certificate holder
Rockwell Automation 2 Executive Drive Chelmsford, MA 01824 USA
Type designation
SafeZone Mini: 442L-SFZNMN, 442L-SFZNMN3
Codes and standards
EN 61496-1:2004+ A1:2008 + AC:2010 IEC 61496-3:2008 EN 62061:2005 + AC:2010 EN ISO 13849-1:2008 + AC:2009 EN 50178:1997 EN 60204-1:2006 + A1:2009 (in extracts)
Intended application
Area monitoring in stationary and mobile applications. The scanner complies with the requirements of the relevant standards (Type 3 acc. to EN 61496-1/-3, Cat. 3 / PL d acc. to EN ISO 13849-1, SIL CL 2 acc. to EN 62061 / IEC 61508) and can be used in applications up to PL d acc. to EN ISO 13849-1 and SIL 2 acc. to EN 62061 / IEC 61508.
Specific requirements
The instructions of the associated Installation and Operating Manual shall be considered.
IEC 61508 Parts 1-7:2010 Code of Federal Regulations CFR29:1990 ANSI B11.19:2010 ANSI/RIA R15.06:1999 GS-ET- 26:2002
It is confirmed that the product under test complies with the requirements for machines defined in Annex I of the EC Directive 2006/42/EC. Valid until 2017-04-27 The issue of this certificate is based upon an examination, whose results are documented in report–no.: 968/M 370.01/14 dated 2014-10-02. This certificate is valid only for products which are identical with the product tested. It becomes invalid at any change of the codes and standards forming the basis of testing for the intended application.
Köln, 2014-10-02 Certification Body for Machinery, NB 0035
www.fs-products.com
Dipl.-Ing. Eberhard Frejno
TÜV Rheinland Industrie Service GmbH, Alboinstr. 56, 12103 Berlin / Germany Tel.: +49 30 7562-1557, Fax: +49 30 7562-1370, E-Mail:
[email protected]
10/222 12. 12 E A4 ® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval.
Reg.-No.: 01/205/5264.01/14
