Preview only show first 10 pages with watermark. For full document please download

T24 - Nanometer Lighting

   EMBED


Share

Transcript

T24 APPLICATION Available in a variety of standard sizes and outputs to fit almost any architectural application. Fixtures may be plugged together for long, no shadow, seamless runs up to 48 feet^ or used as individual luminares with easy-snap end caps. The unique plug and play system allows for quick, easy installation with consistent pitch spacing. Great for millwork, niches, suspended lines, coves or slots. Populated with alternating CCT LEDs mounted 11MM on center to an aluminum substrate for superior thermal dissipation. The T24 features positive engagement end connectors. Optional full wiring or mounting channel available. Robust leader cables for easy energizing and remote wiring. The T24 offers complete system flexibility; 6 standard sizes readily available, with custom lengths and illuminated corners built to order. The T24 is a low voltage, remote driver system bright enough for general illumination or available with lower output for a warm glow. Optional lensing, optics and beam angles are available, please consult factory. LIGHT OUTPUT & POWER CONSUMPTION VERY HIGH OUTPUT shown without endcap HIGH OUTPUT SIZE Lumens* Watts Lumens QUICK VIEW 6” 1.422” 1.219” .925” 1.075” shown with the QW1 lens and optic layer VO 600 lm 5.5W MEDIUM OUTPUT Watts Lumens HO 450 lm 5.4W MO 300 lm HO 900 lm 10.8W HO 1350 lm 16.2W VO 2400 lm 21.8W HO 1800 lm 48” VO 4800 lm 43.6W 72” VO 7200 lm 65.4W 12” VO 1200 lm 10.9W 18” VO 1800 lm 16.4W 24” STANDARD OUTPUT Watts Lumens Watts SO 200 lm 2.6W MO 600 lm 6.72W SO 400 lm 4.8W MO 900 lm 10.3W SO 600 lm 7.4W 21.6W MO 1200 lm 13.44W SO 800 lm 9.6W HO 3600 lm 43.2W MO 2400 lm 26.88W SO 1600 lm 19.2W HO 5400 lm 64.8W MO 3600 lm 40.32W SO 2400 lm 28.8W 3.6W VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO THIS RAPIDLY CHANGING TECHNOLOGY ELECTRICAL Auto-ranging 120V to 277V mains input 48VDC Constant Voltage output QUICK FACTS DIMMING 28 diodes per foot, 11MM on-center DMX Controlled 82+ CRI Fully configurable for various sizes FINISH Anodized aluminum finish Custom colors and finishes available, please consult factory Available in 2700K, 3000K, 3500K, 4000K, Red, Blue, Green, Amber Up to 1200 lumens* per foot ORDERING INFORMATION Plug and play long continuous runs Example: 40 - ____ 48 - ____ QW1 27 - ___ T24 - MO ___ - ____ DMX controlled T24 - __ - __ - __ - ___ Operating tempature -10F to 102F 50,000 HRL at L70 @ 50C 70,000HRL at L70 @ 25C 5 Year Limited Warranty ETL Listed Static White see “L24” RGB and RGBW see “C24” LENSING OUTPUT VO - Very High Output HO - High Output MO - Medium Output SO - Standard Output Accessory optons, wiring compartments, optics, end caps and mounting; see L24 Options page CCT 24 - 2400K** 27 - 2700K 30 - 3000K 35 - 3500K 40 - 4000K 55 - 5500K** (two colors needed) LENGTH 06 - 6” 12 - 12” 18 - 18” 24 - 24” 48 - 48” 72 - 72” *VO version, driver losses not included ** Available as special order Consult factory for custom CCT and lengths voltage drop chart for exact maximum runs 072515 ^Consult QW1 - Squared Opal Lens QC1 - Squared Clear Lens QS1 - Squared Semi-translucent Lens QW2 - High Squared Opal Lens QC2 - High Squared Clear Lens QS2 - High Squared Semi-translucent Lens RW1 - Round Opal Lens RC1 - Round Clear Lens RS1 - Round Semi-translucent Lens FW1 - Flat Opal Lens FC1 - Flat Clear Lens FS1 - Flat Semi-translucent Lens nanometer lighting 57-10 49th place maspeth, ny 11378 p. 718.497.0394 f. 718.821.9316 T24 DIMENSIONS END CAP WITH HOLE FOR LEADER CABLE (FEMALE SIDE) F_1 FLAT LENS LEFT (FACING FEMALE SIDE) 1.219 in 0.925 in 072515 1.069 in NOTE: ALL ANGLED END CAPS AVAILABLE AS LEFTS AND RIGHTS FIXTURE ANGLE IS DETERMINED BY DIRECTION LOOKING AT FEMALE, FINISHED SIDE. BLANK SIDE WILL BE LABELED LOOKING AT NON-FINISHED SIDE DISCLAIMER: BE SURE TO VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO RAPIDLY CHANGING TECHNOLOGY F_1 FLAT LENS 1.1 in 1.308 in 0.955 in 0.925 in 1.069 in R_1 ROUNDED LENS 1.219 in 1.35 in 0.925 in R_1 ROUNDED LENS LEFT (FACING FEMALE SIDE) Q_1 STANDARD SQUARE LENS 1.31 in 1.157 in Q_1 STANDARD SQUARE LENS LEFT (FACING FEMALE SIDE) 1.422 in Q_2 HIGH SQUARE LENS 1.51 in Q_2 HIGH SQUARE LENS LEFT (FACING FEMALE SIDE) 0.925 in nanometer lighting 57-10 49th place maspeth, ny 11378 p. 718.497.0394 f. 718.821.9316 T24 DIMENSIONS SIDE VIEW 72” 48” 12” 6” 0.24 0.24 END CAP SIDE VIEW END CAP ATTACHMENT 0.48 0.15 0.24 0.18 MALE SIDE END CAP nanometer DISCLAIMER: BE SURE TO VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO RAPIDLY CHANGING TECHNOLOGY 072515 lighting 57-10 49th place maspeth, ny 11378 p. 718.497.0394 f. 718.821.9316