Transcript
TELESCOPIC HANDLERS
T40140 T40180 STAGE IIIA
Full flexibility A complete set of attachments provides full flexibility and job compatibility.
Maximum uptime Side-mounted engine and easy-to- access maintenance points for fast service and maintenance.
Optimum Safety Unique integrated frame-levelling and side-shift system for use on both tyres and stabilizers.
HIGHER – STRONGER – BETTER… The new 14m and 18m Bobcat® telescopic handlers provide you with what matters most – ease-of-use, safety and performance. Simplicity in design make these telescopic handlers easy to use. State-of-the-art safety systems and class-leading performance give you 100% confidence in the machine. The T40140 and T40180 work with the best possible efficiency and productivity, with a constant focus on safe operation.
2
Higher reach Minimal loss of lift height between operating on tyres and on stabilizers.
Ergonomic comfort Logically designed and positioned controls provide greater comfort, control and productivity.
Total visibility Rounded cab design features large front and rear windows to Compact stability Compact stabilizers ensure full
maximise all-round visibility.
capabilities can be used in even the most confined areas.
3
SIMPLICITY An easy-to-use machine means better performance, higher productivity and, ultimately, safer operation. The T40140 and T40180 are models of simplicity, with a wide range of features.
Ergonomics The ergonomic controls are within arm’s reach, providing an extra level of safety and operational control. • FNR control button on the joystick • Electronic dashboard • Adjustable steering wheel • Integrated airflow solution
FNR on Joystick puts maximum control at your fingertips. Select the driving direction at the touch of a button, while still keeping a grip on both the steering wheel and the joystick for improved safety and productivity. Information at your fingertips • Continuous frame-levelling angle on LCD display - when levelling function is activated, the LCD screen automatically shows the angle to keep you fully aware of machine parameters. • Boom angle value available on the LCD screen promotes precision movements and faster work-cycles for repetitive tasks. • Semi-automatic wheel alignment helps make sure the wheels are always aligned when you change between the 3 steering modes. • Aux flow control is easily and precisely controlled from the joystick. • Stabilizer detection on ground - sensor continuously monitors the pressure to prevent drops/leaks and ensure safe stab usage at all times.
4
Spacious environment The new cab is designed with the operator in mind. Providing an exceptional level of comfort to keep you more alert and improve the safety of the work site.
Total visibility The rounded cab design features a large front window to maximise visibility of the attachment – at any height or reach. Large rear window ensures maximum rear visibility, increasing your spatial awareness and the accuracy of rear movements. The design of the protective roof grid provides maximum protection while ensuring that the attachment is visible at full height.
5
CONFIDENCE… IN YOUR BOBCAT TELEHANDLER Attention to details … improving Quality, Reliability & Durability The new T40140 and T40180 models provide a new level of confidence…in the machine’s performance and safety, and in its robustness. This is achieved by applying the rigorous Bobcat® development standards across all functions on the new models.
• New generation cooling package ensures smooth and stable control of the hydraulic oil temperature and hydraulic hose life optimisation. • Complete protection of the tilt cylinder within the boom head ensures minimum risk of damage and increased operator safety. • Integrated boom head design provides reinforcement to handle heavy lifting while also providing added peace-of-mind when operating from a man platform. • New generation wear pads, larger bolts, larger steel inserts to benefit from increased friction coefficient. • Safe and smooth management of over-speed to ensure maximum durability and uptime.
6
Safety The load management system on the new T40140 and T40180 ensures safe operation at all times – regardless of the load. The display – positioned for maximum visibility – provides continuous clear information on load management.
7
PERFORMANCE… HOW TO MAKE THE GOOD EVEN BETTER! Compactness = access Easy-to-use compact stabilizers ensure that the T40180’s full capabilities can be used in the most confined working areas. 3 steering modes provide a solution for any movement. You can easily manoeuvre into hard-toreach areas with the short turning radius.
Side Shift Unique integrated frame-levelling and sideshift system works independent of the main frame to provide ± 4° bankangle on tyres and up to ± 12° angle on stabilizers. The system ensures maximum flexibility and up to ± 700 mm side shift at full extension.
8
Reaching higher than ever - both on tires and on stabilizers. We believe a high-reach machine should not have limitations! The T40180 provides top-class stability, ensuring minimal loss of lift height and capacity when operating on tires With a top speed of 30 km/h, the new models can quickly move between locations, reducing travel times.
9
ENGINE Maintenance Improved serviceability: active monitoring of machine systems, with real-time information provided for diagnostics. • Battery located in engine basket for easy access. Electric switch ensures that the battery is not accidentally left connected overnight
10
T40140 T40180 — SPECIFICATIONS Performance 13600.0 mm 13300.0 mm 4100 kg 4100 kg kg 2500 kg 1250 kgmm 500 kg mm 9800.0 mm 9800.0 mm kg 5200 daN kg
Tilt Crowding Force Weight (unladen)
daN 10290 kg
Weights
Specifications
With forks and standard 400/80x24 tyres, on stabilisers
4100
4000
13300 / 13600
16200 / 17500
9800 / 9800
12800 / 13700
2500 / 4000
1000 / 2500
500 / 1300
0 / 560 12300
WEIGHTS
Standard tyres Weight (unladen) Low speed (forward/reverse) High speed (forward/reverse) Driving modes ENGINE
400/80x24 kg 10290 8.5 km/h 30.0 km/h Direct drive / soft drive
Make / Model Fuel / Cooling
T40180 3B
Engine
10790
Stage IIIA
Drive System Main drive Transmission
Telescopics
Load Charts
Lifting height — on stabilisers Lifting height — on tyres Rated capacity PERFORMANCE Capacity (at max. height on stabilisers) Maximum Lift Capacity Capacity (at max. height on tyres) Height (on tyres / on stabilizers) Capacity (at max.Maximum reach onLift stabilisers) Capacity (at max. reach on tyres) Maximum Forward Reach (on tyres / on stabilizers) Max. reach on stabilisers Max. reach on tyres Lift Capacity at Full Height (on tyres / on stabilizers) Crowding force Lift Capacity at Full Reach (on tyres / on stabilizers)
Traction
T40140 3B
PERKINS / 1104D-44TA Hydrostatic motor Hydrostatic with electronic regulation DIESEL / Water
Telescopics
Rated Power (ISO 14396) at 2300 RPM kW 74.5 (100) Make / Model Maximum Torque at 1600 RPM DEUTZ Nm / TCD 3.6 L4 410 Performance Fuel Diesel Specifications Lifting height — on stabilisers 17500.0 mm Number of Cylinders 4 Cooling Liquid Lifting — on14396) tyres at 2300 RPM 16200.0 Rated height power (ISO 74.4 kW mm Displacement l 4.4 Rated capacity 4000 Maximum torque at 1600 RPM 410.0kg Nm Capacity max. height on stabilisers) 2500 kg Load Charts Number of(atcylinders 4 Capacity (at max. TRACTION height on tyres) 1000 Displacement 3.62 Lkg Withreach forks on andstabilisers) standard 400/80x24 tyres, on stabilisers Capacity (at max. 560 kg Standard Tyres Basic Option Tyres 400/80-24" Hydraulic System Capacity (at max. reach on tyres) 0 kg Max. reach on stabilisers 13700.0 mm Pump type Gear pump Low Speed (forward / reverse) km/h with LS valve 8.5 Max. reachpump on tyres 12800.0L/min mm Combined capacity 100.00 km/h 30 Crowding force High Speed (forward / reverse) 4900 daN
Cycle Times Weights Driving Modes
Lift time - no load Weight (unladen) Lower time - no load SYSTEM Telescope in time DRIVE at max. reach - no load Traction Telescope in time at max. height - no load Standard Telescopetyres out time at max. reach - no load Transmission Low speedout (forward/reverse) Telescope time at max. height - no load High speed (forward/reverse) Main Drive Brakes Driving modes Engine braking HYDRAULIC SYSTEM Drive System Parking and emergency brake Main drive Pump Type Fluid Capacities Transmission Combined Axles and reduction gears Pump front Capacity / rear Engine Engine oil Working Pressure Make / Model Fuel tank Fuel Hydraulic reservoir [HYDRAULIC] BRAKES Cooling Standard Features Rated power (ISO 14396) at 2300 RPM Service Brake Maximum torque at 1600Arrester RPM (AMA) Aggravating Movements Number of cylinders Hydrostatic transmission Parking and Emergency Brake Displacement operator cab ROPS/FOPS Complies with stability test EN1459 Ennex B Heating, demisting and ventilation Hydraulic System Front and rearDimensions washer/wipers DIMENSIONS Pump type seat Suspension Combined Road lightspump capacity Turn signals Cycle Times
Environmental Lift time - no load
Lower time - no load Sound pressure level (LpA) Telescope in timepower at max.(LWA) reach - no load Level of acoustic Telescope time at max. - no load Whole bodyinvibration (ISOheight 2631–1) Telescope out time at max. reach - no load Telescope out time at max. height - no load
Brakes Engine braking Parking and emergency brake
2WS / 4WS / CRAB 12.8 s 10790 8.4 s kg 12.9 s 11.3 s 400/80x24 18.8 s Hydrostatic with electronic regulation 8.5 18.8km/h s 30.0 km/h Hydrostatic motor Direct drive / soft drive Hydrostatic Negative brake with hydraulic command Hydrostatic motor Gear pump with LS valve Hydrostatic with electronic regulation 100 9.1/9.1l/min L
8.00 L bar 255 DEUTZ 145.00 L/ TCD 3.6 L4 Diesel 76.00 L Liquid 74.4 kW Oil immersed discs 410.0 and Nm left side mirrors Right 4 way hydraulic supply at the end of the boom Two Negative brake with hydraulic command 3.62 L Mudguards Turbo-charged engine - Perkins Stage 3A Narrow hook-up for mounting of the equipment Gear pump with valve Mechanical lock LS of the equipment (A) 7313.0 mm (A) 7425.0 mm 100.00 L/min tyres Four 400/80x24 (B) 6052.0 mm (B) 6164.0 mm Transmission lock(E)override 2670.0 mm (E) 2670.0 mm (F) 2476.0 mm (F) 2476.0 mm 12.8 s (G) 124° (G) 124° 8.4dB(A) s (J) 500.0 mm (J) 500.0 mm 79 (M) 2850.0 mm (M) 2850.0 mm 20.3dB(A) s 106 (O) 930.0 mm (O) 930.0 mm 17.7 ms s -2 0.29 (P) 1992.0 mm (P) 1992.0 mm 29.0 s (Q) 2394.0 mm (Q) 2394.0 mm 29.0 s (R) 5720.0 mm (R) 5822.0 mm (S) 3782.0 mm (S) 3782.0 mm (U) 1761.0 mm (U) 1761.0 mm Hydrostatic Negative brake with hydraulic command
T40180 3B
Telescopics Specifications
Complies with stability test EN1459 Ennex B
Load Charts Dimensions With forks and standard 400/80x24 tyres, on stabilisers
(-) (-) (A) (B) (E) (F) (G) (J)
16° 109° 7313.0 mm 6052.0 mm 2670.0 mm 2476.0 mm 124° 500.0 mm
(M) (O) (P) (Q) (R) (S) (U)
2850.0 mm 930.0 mm 1992.0 mm 2394.0 mm 5720.0 mm 3782.0 mm 1761.0 mm
Options
Air conditioning Multifunctional remote Complies with stability test EN1459 Ennex B Air suspension seat control Dimensions Auxiliary line on boom No forward/reverse control on joystick witch ACD and electric connectors Pintle tow hitch Back up alarm Radio ready Basic tow hitch Rear electric auxiliary Boom stop Rear flat mirror Roof window wiper Carriage with hydraulic attachment lock Rotating beacon Cold start Sun visor Custom colour Support for registration plate Cyclonic air prefilter Drawbar coupler tow hitch Windscreen grill Fan inverter Work light on boom Fire extinguisher Wheel wedge Winch ready Lockable fuel cap (-) 16° predisposition (M) 2850.0 mm Man platform (-) 109° (O) 930.0 mm (A) 7425.0 mm (P) 1992.0 mm (B) 6164.0 mm (Q) 2394.0 mm (E) 2670.0 mm (R) 5822.0 mm (F) 2476.0 mm (S) 3782.0 mm (G) 124° (U) 1761.0 mm B33H 11001 — B33H 99999 • 2013-10-21 • ©2013 Bobcat EMEA - www.bobcat.eu (J) 500.0 mm
Fluid Capacities Specifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment (-) 16° front / rear (M) 2850.0 mm Axles and reduction gears 9.1/9.1 L Options 109° (O) 930.0 mm145.00 L Fuel tank (-) Air conditioning (A) [HYDRAULIC] 7425.0 mm (P) 1992.0 mm Hydraulic reservoir 76.00 L Air suspension seat (B) 6164.0 mm (Q) 2394.0 mm Auxiliary line on boom Standard(E) Features 2670.0 mm (R) 5822.0 mm witch ACD and electric 11 Aggravating Movements Arrester (AMA) Right and left side mirrors (F) 2476.0 mm (S) 3782.0 mm connectors Hydrostatic transmission Two way hydraulic supply at the end of the boom (G) 124° (U) 1761.0 mm Back up alarm
Man platform predisposition Multifunctional remote control No forward/reverse control on joystick Pintle tow hitch
T40140
T40180
Air conditioning
OPTIONS
x
x
Air suspension seat
x
x
Auxiliary line on boom with ACD and electric connectors
x
x
Back-Up alarm
x
x
Basic tow hitch
x
x
Boom light
x
x
Boom stop
x
x
Carriage with hydraulic attachment lock
x
x
Cold start
x
x
Cyclonic air prefilter
x
x
Document holder (PVC)
x
x
Drawbar coupler tow hitch
x
x
Fan inverter
x
x
Fire extinguisher
x
x
Forward/Reverse control on steering wheel lever
x
x
Lockable fuel cap
x
x
Manplatform Installation
x
x
Michelin tyres - set of 4 x 400/80-24"
x
x
Multifunctional remote control
x
x
Custom colour
x
x
Pintle tow hitch
x
x
Protective grill for windshield
x
x
Protective zinc coat
x
x
Radio ready
x
x
Rear electric auxiliary
x
x
Rear flat mirror
x
x
Roof window wiper
x
x
Rotating beacon
x
x
Sun visor
x
x
Support for vehicle registration plate
x
x
Wheel wedge
x
x
Winch Installation
x
x
ATTACHMENTS
T40140
T40180
Digging Bucket w/o teeth
x
x
Digging Bucket w/ teeth
x
x
Concrete Bucket, hydraulic
x
x
Concrete Bucket, mechanic
x
x
Rigid Pallet Forks Frame
x
x
Rigid Pallet Forks Frame w/Backrest
x
x
Floating Pallet Forks, 1,12m wide
x
x
Floating Pallet Forks, 1,44m wide
x
x
Jib 4.1t, 0.7m
x
x
Jib 0.7t , 3.7m
x
x
Winch 4.1t
x
x
Winch w/ Jib 600 kg
x
x
Winch w/ Jib 1000 kg
x
x
Man Platform, extendable, rotatable, 4m
x
x
Man Platform , fixed, 1m
x
x
©2013 BOBCAT B4474500-EN (11-13)
DI CE - Drève Richelle 167 - B-1410 Waterloo, Belgium
Specifications and design are subject to change without notice. Pictures of Bobcat products may show other than standard equipment.
T40140 T40180 — SPECIFICATIONS
Anfrageformular: Sie haben Fragen oder wünschen eine persönliche Beratung? Wir helfen Ihnen gerne persönlich unter der Rufnummer 02864 - 882288. Oder füllen Sie schnell und unverbindlich das folgende Formular aus und senden Sie es uns per Fax, E-Mail oder Post. Wir freuen uns auf Ihre Anfrage! Faxantwort bitte an 02864 - 882289, postalische Antwort bitte an nebenstehene Adresse.
Alte Ziegelei 12 48734 Reken Fon: +49 (0) 28 64/88 22 88 Fax: +49 (0) 28 64/88 22 89 Mail:
[email protected] Web: www.meis-baumaschinen.de
Kreise bitte ankreuzen.
Ja, der Einsatz eines Bobcat Teleskopladers ist für unseren Betrieb interessant. Bitte nehmen Sie Kontakt zu uns auf und beraten Sie uns persönlich.
Bobcat T40140
Bitte senden Sie uns ein Angebot für die folgende(n) Maschine(n):
Bobcat T40180 andere/s Modell/e:
Bitte vereinbaren Sie mit uns einen Termin für eine persönliche Beratung / Vorführung Sonstiges:
Ihre Adressdaten: Betrieb: Ansprechpartner: Adresse:
Favorisierte Kontaktmöglichkeit:
Telefon Post e-Mail Fax
