Tab-702 7” Mobile Internet Device Quick Guide

Transcript

TAB-702 7” Mobile internet device Quick Guide For information and support, www.lenco.eu Lenco_TAB-702_UM_ENG_V1.0 Safety Precautions IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM SERVICING. This symbol indicates that there are important operating maintenance instructions in the user manual accompanying this unit. This symbol indicates that dangerous voltage is present within this unit constituting a risk of electric shock or personal injury. Keep these instructions in mind:








Do not use this unit near water. Clean only with a slightly damp cloth. Do not cover or block any ventilation openings. When placing on a shelf leave 5 cm (2”) free space around the whole unit. Install in accordance with the supplied guick guide. Protect the power cord from being walked on or pinched, particularly at plugs, and the point where it exits the unit. Do not place heavy items on the power cord, which may damage it. Take note that the power cord cannot be reached and pulled by young children, avoiding injury. Unplug this unit during lightning storms or when unused for a long period of time. Keep the unit away from heat sources such as radiators, heaters, stoves, candles and other heatgenerating products. Avoid using the device near strong magnetic fields. Normal functioning of the product may be disturbed by ESD. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.


WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH VENTS OR OPENINGS. HIGH VOLTAGE FLOWS IN THE PRODUCT AND INSERTING AN OBJECT CAN CAUSE ELECTRIC SHOCK AND/OR SHORT INTERNAL PARTS. FOR THE SAME REASON, DO NOT SPILL WATER OR LIQUID ON THE PRODUCT. Do NOT use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools. Do not use this unit when moisture condensation may occur. 2 SAFETY PRECAUTIONS (continued) This unit has been produced according to all current safety regulations. The following safety tips should safeguard users against careless use and the dangers connected with such use.
Although this unit has been carefully manufactured and rigorously checked before leaving the factory, as with all electrical appliances, it is possible for problems to develop. If you notice smoke, an excessive build up of heat or any other unexpected phenomena, you should disconnect the plug from the mains power socket immediately.
Ensure that the unit is sufficiently ventilated!
This unit must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
The socketoutlet must be installed near the equipment and must be easily accessible.
Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
Units with Class 1 construction shall be connected to a mains socket outlet with a protective earthing connection.
Keep away from rodents. Rodents enjoy biting into power cords.
Always hold the plug when pulling out the plug from the mains supply socket. Do not pull the power cord. This can cause a short circuit.
The screen is made of plastic and can break if damage is done to it. When broken, be careful with sharp edged plastic splinters to avoid injury.
Avoid placing the unit on any surfaces that may be subject to vibrations or shocks.
To protect the unit during a thunderstorm unplug the AC power cable.
When the unit is not used for long periods of time, unplug the AC power cable for safety reasons.
Do NOT tap or shake the screen, you may damage the internal circuits. Take good
To clean the tablet use a soft dry cloth. Do NOT use solvents or petrol based fluids. For stubborn stains, you may use a damp cloth with dilute detergent.
We are not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
If the device will not be used for an extended period of time, please charge the battery at least once per month to maintain battery life.
Charge the battery if:
a) The battery level icon displays (An empty battery)
b) The device powers off automatically when restarted.
Do not interrupt the connection when the device is being formatted or transferring files. Otherwise, data may be corrupted or lost. Where to install Locate the tablet away from direct sunlight and a strong light, soft indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. When the tablet is put away place it on a sturdy platform of which the surface should be flat and steady. This will prevent it from falling over. Make sure the tablet is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen, and so that small objects cannot be inserted into the ventilation slots or openings in the cabinet. Declaration of Conformity Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. National Restrictions This product may be used freely in the following EU countries (and other countries that follow the EU directive 1999/5/EC): Germany, United Kingdom, Italy, Spain, Belgium, The Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway, Iceland. In France only channel 1 through 7, the law prohibits the use of other channels. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference and 2 This device must accept any interference received, including interference that may cause undesired operation. Made in China | A pleine puissance, L’encoute prolongee du baladeur peut endommager L’oreille de l’utilisateur | Prolonged listening at full volume may damage your hearing 3 Note: This user manual is printed prior to the product development. When a part of the product specification must be changed to improve operability or other functions, priority is given to the product specification itself. In such instances, the instruction manual may not entirely match all the functions of the actual product. Therefore, the actual product and packaging, as well as the name and illustration, may differ from the manual. The pictures shown as an example in this manual may be different from the actual screen display. Lenco is not liable for any consequential damage. IMPORTANT NOTE: The USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data. WARNING: long term exposure to loud sounds from personal music players may lead to temporary or permanent hearing impairment. When participating in traffic, listening to an personal music player makes the user less aware of ambient sounds. This can cause danger to the user of other road users. 4 Pixel Policy Lenco has decided to participate in the ISO 13406-2 standard. This is a quality standard which Lenco has decided to participate in in order to increase its service level. This is a class II panel. 5 End of life In case of disposal of the unit note that all batteries and accumulators need to be removed from this product first. We recommend to bring the unit back to the purchasing address. They will remove the battery and recycle the unit free of charge. If you want to remove the batteries or accumulators yourself, use the following instructions to remove them: 1. Open the unit by using a flat screwdriver. 2. Cut the power wires of the battery, first the black wire, second the red wire. 3. Place a flat screwdriver under the battery, wipe it up and cut all remaining wires. Batteries need to be disposed according to the “Waste Electrical and Electronic Equipment Directive”. 6 This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive). When you see a crossed-out wheeled waste container on the product. It means that the product falls under the EU directive 2002/96/EC. 7 Dear customer, Thank you for purchasing this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this product we manufactured this product using high quality standards, materials, components and care. What’s in the box? Our factory assembles the content of the box with the utmost care. If unfortunately an accessory is missing in the box, please contact your dealer as soon as possible. Checking the accessories supplied: 1x TAB-702 1x AC/DC Adaptor 1x USB cable 1x USB Host cable 1x Earphone 8 Table of content Safety Precautions ...................................................................................................................... 2 Pixel Policy ................................................................................................................................ 5 End of life................................................................................................................................... 6 What’s in the box?...................................................................................................................... 8 Exploring the device................................................................................................................. 10 Basic operation ......................................................................................................................... 11 Turn the unit on and off........................................................................................................ 11 Turning the Screen On and Off (Standby) ........................................................................... 11 Unlocking the Screen ........................................................................................................... 11 Locked screen....................................................................................................................... 11 Opening applications............................................................................................................ 11 Connect to a Wi-Fi network ................................................................................................. 12 Connecting to a Computer........................................................................................................ 13 Troubleshooting ....................................................................................................................... 13 Service and support .................................................................................................................. 14 Specifications ........................................................................................................................... 15 9 Exploring the device 1. Home button Press this button to return to the home screen. Press and hold to view a list of recently used applications; touch an application in the list to launch it. 2. VOL-/VOL+ Press this button to increase / decrease the volume level. 3. Power button Press this button to turn the unit on, or to turn the screen on and off. Press and hold this button to access the Power Off menu. 4. Back Press this button to return to the previous screen. If the keyboard is active on the screen, press it to close the keyboard. 5. Menu Press this button to view the option menu. 6. Charge LED While charging the led is red, when fully charged the led turns green. 7. WIFI LED When the wifi antenna is active the led is green. 8. Power socket Connect the power adaptor. 9. USB Host socket USB 2.0 connection, connect an external USB device (like MP3 player). 10. USB socket Use this socket to connect the TAB702 to a PC. 11. Headphone socket Connect a headphone 12. HDMI socket Connect the TAB-702 to an external display. HDMI cable not included HDMI cable type A to C 13. Micro SD card slot Insert a micro SD memory card. Up to 32 GB supported. 10 Basic operation Turn the unit on and off Turn on: Press and hold the Power button (3) until the LCD screen turns on. Wait until the home screen appears; the tablet is now ready for use. Turn off: 1. Press and hold the Power button (3) until the Device Options menu appears. 2. Touch Power off on the screen to turn off the tablet. Turning the Screen On and Off (Standby) When the tablet is on, you can turn off the screen to conserve battery power. Press the Power button (3) once to turn the screen off. Press the Power key again to turn the screen on. Note: The screen can be set to turn off automatically when the tablet is not used between 1 minute and 30 minutes. This Screen timeout option can be found in the display menu. Unlocking the Screen When the screen turns off, you will have to unlock the screen when you turn it back on. To unlock the screen, drag the lock icon across the screen towards the speaker icon. Locked screen Opening applications To open an application, touch the application icon on the home screen or in the Launcher. Launcher screen 11 Connect to a Wi-Fi network The Notification bar displays icons that indicate the Wi-Fi status. Notification bar Notification that a Wi-Fi network is in range. Connected to a Wi-Fi network (waves indicate connection strength). There are no Wi-Fi networks in range, or the Wi-Fi antenna is off. 1. Turn on the Wi-Fi (if it is not already on). To turn on Wi-Fi: a. Go to the Home screen: Press the Home key. b. Open the Settings menu: Tap the Menu key, and then touch Settings. c. Open the Wireless & networks menu: Touch Wireless & networks. d. Open the Wi-Fi settings menu: Touch Wi-Fi settings. e. Make sure that the Wi-Fi option box is checked: Touch Wi-Fi. When Wi-Fi is on, the tablet will scan for wifi networks. Notes: The tablet automatically re-connects with “known” networks. If you don’t see the desired network in the list, you can force the tablet to re-scan. To scan for networks, tap the Menu key, and then touch Scan. 2. Select an available Wi-Fi network to connect to. a. If the network is unprotected, the tablet will ask confirmation to connect to the network. b. If the network is protected (as indicated by a Lock icon), the tablet will ask for the password or other credentials. Touch the Wireless password box to show the on-screen keyboard and then use it to enter the password. Touch Connect to confirm. When you have successfully connected to a Wi-Fi network, the Notifications bar at the top of the screen will show a Wi-Fi signal indicator. 12 Connecting to a Computer Connect the tablet to a computer to transfer files. 1. Connect the tablet to a computer via the USB cable. 2. When your tablet is connected, a USB logo will appear. 3. Mount the storage drive. Touch turn on USB storage to mount the tablet’s built-in storage, and then touch Mount to confirm. When mounted, you can copy files to/from your computer to it. Troubleshooting Reset this device  In the event that the device freezes, you can force the device to shut down by holding the Power button for 15 seconds.  If the Power button does not reset your device, use the “pinhole reset” button. 13 Service and support Lenco offers service and warranty in accordance to European law, which means that in case of repair (both during and after the warranty period); you should contact your local dealer. Please note: It is not possible to send repairs to Lenco directly. Lenco helpdesk: Germany The Netherlands Belgium France 0699- 5307177 0900-BELLENCO (0900-23553626) 026-200115 0170480005 The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM. In case your device needs repair our helpdesk will redirect you to your local dealer. Important note: If the unit is opened by a non-official service center the warranty expires. 14 Specifications Processor RAM Storage Display Wi-Fi Networking Video Output Audio Output PC Interface USB Host Additional Features Operating System Power Playback Time (hours) iMAPx210 800MHz (ARM11) 256 MB DDR2 4 GB flash built-in microSD card slot (max. 32 GB supported) 7.0”TFT LCD(800x480), resistive touch screen IEEE 802.11 b/g/n Mini HDMI,type C (1080p and 720p supported) 3.5mm headphone USB 2.0 USB 2.0 Built-in microphone Front facing camera(0.3MP) Mono speaker Android™ 2.3 Rechargeable Li-poly battery power Adapter DC 9V,2A Up to 6 hours music, 3 hours video, 4 hours web browsing 15