Transcript
Table of contents Parts identification . . . . . . . . . . . . . . . 2 Preparation 1: Confirming the time signal reception and power reserve . . . . 4 2: Checking the reference position of the hands . . . . . . . . . . 6 3: Setting the city . . . . . . . . . . . . . . 7 Using the chronograph . . . . . . . . . . . 10 Using the world time . . . . . . . . . . . . . 11 Using the alarm. . . . . . . . . . . . . . . . . . 12 Setting the daylight saving time . . . 14 Notes on the time signal . . . . . . . . . . 16 Receiving the time signal manually (On-demand reception) . . . . . . . 20
Notes on the indications for the time signal reception . . . . . . . . . . . . . . 21 Notes on the reception of the time signal. . . . . . . . . . . . . 22 Setting the time/ calendar manually . . . . . . . . . . . . 26 Adjusting the reference position . . . 30 Using the calculation scales . . . . . . . 32 Notes on charging your watch . . . . . 44 Troubleshooting . . . . . . . . . . . . . . . . . 48 Precautions . . . . . . . . . . . . . . . . . . . . . 54 Maintenance . . . . . . . . . . . . . . . . . . . . 62 Information . . . . . . . . . . . . . . . . . . . . . 63 Specifications . . . . . . . . . . . . . . . . . . . 66
1
Parts identification Signal reception indication (NO/RX/H/M/L)
Chronograph second hand Chronograph minute hand
24-hour hand
Power reserve indication H
RX NO
M
Alarm indication L
Upper right button (B)
ON 24
15
20
4
16
8
30
50
MA
10
40
US
20 30
JP N
D
Second hand
60
ST AU
Scale*
SMT MA
Crown for the scale*
AU
Daylight saving time indication
12
OFF
45
ALM
60
Hour hand
Crown
CHI N SC YC L
㻣
Minute hand Lower right button (A)
A EUR CHN
Date indication City indication
Signal station indication • The illustrations in this instruction manual may differ from the actual appearance of your watch.
2
How to use the screw down crown and screw down push button Some models feature a screw down crown and screw down push button. Locking the crown and button prevents accidental operation. Unlock them when you want to operate the watch. Unlock
Lock
Screw down crown
Rotate the crown counterclockwise (left) until it releases from the case.
Rotate the crown clockwise (right) while pushing it in, and tighten firmly.
Screw down push button
Rotate the locking screw counterclockwise (left), and loosen until it stops.
Rotate the locking screw clockwise (right), and tighten firmly.
• Unlocking is not required when a standard crown and button are equipped. * Some models do not feature the scale and the crown for the scale.
3
Preparation 1: Confirming the time signal reception and power reserve You must confirm the signal reception result and charge level at first before use.
1. Ensure that the crown is in position 0. 2. Press the lower right button (A).
012
The chronograph second hand indicates the signal reception result and the chronograph minute hand indicates the current power reserve level.
A Crown position
• See the next page to show the indications.
3. Press the lower right button (A) to return to normal operation.
60 45
15 30
60
24
15
20
60
• Before the operation above, reset the chronograph.
4
The indication of the signal reception result For in depth information on the receiving, see page 22.
Indication Result
H
M
L
The indication of the power reserve level 60
Indication
45
60 15
30
Power duration
About six days
45
60 15
30
45
60 15
45
30
15 30
About six to 35 days About 35 to 150 days About 150 to 240 days
Charge the watch at once.
The indication is not so precisely. Charge the watch frequently . See page 44.
5
2: Checking the reference position of the hands If the reference position is incorrect, the time and calendar are not indicated properly.
012
B
1. Ensure that the crown is in position 0. 2. Press and hold the upper right button (B) for ten seconds.
The hands moves quickly to show the current reference position.
Crown position
The correct reference position is when; • all hands are indicating 12:00; • the date indication is between “31” and “1”.
HKG T AD YO L
㻟㻝 㻝
Correct reference position
• You can select any city for checking the reference position.
If all the hands are not in the correct reference position, adjust them referring to page 30.
3. Press the upper right button (B) to complete confirmation.
• Before the operation above, reset the chronograph.
6
3: Setting the city You can select your home or favorite city from 26 cities in the world.
1. Pull the crown out to position 1.
012
The chronograph second hand indicates the daylight saving time setting.
2. Rotate the crown to select the city. Crown position
HKG T AD YO L
Crown
012
• Refer to the pages 8 and 9. • Adjust the position of the city name to the center of the window. • Each time you change the city, the time of the selected city is shown.
3. Push the crown in to position 0.
㻣 Crown position
7
Table of the city names Indication
City name
Time difference
Signal station
UTC LON
−
−
London
0 0
PAR
Paris
+1
CAI
Cairo
+2
8
Moscow
Delhi
+3 +4 +5 +5.5
DAC
Dhaka
+6
BKK
Bangkok
+7
HKG
Hong Kong
+8
TYO
Tokyo
ADL
Adelaide
MOW DXB KHI DEL
Dubai Karachi
+9 +9.5
EUR
CHN
JPN
The signal station is changed depending on the selected city. Some cities cannot receive the signal though the signal station is assigned in the list.
Indication
City name
Time difference
SYD
Sydney
+10
NOU AKL MDY HNL ANC LAX DEN
Noumea
Denver
+11 +12 -11 -10 -9 -8 -7
CHI
Chicago
-6
NYC SCL RIO
New York Rio de Janeiro
-5 -4 -3
FEN
Fernando de Noronha
-2
PDL
Azores
-1
Auckland Midway Island Honolulu Anchorage Los Angeles
Santiago
Signal station JPN
USA
EUR
9
Using the chronograph You can record up to 60 minutes in increments of 0.2 seconds.
012
B
1. Ensure that the crown is in position 0. 2. Press the upper right button (B) to start timing.
The chronograph second hand starts timing.
3. Press the upper right button (B) to stop
Crown position
timing.
• Pressing the upper right button (B) restarts timing. • You have to reset the chronograph after timing for using other functions.
A
10
To reset the chronograph Press the lower right button (A) while stopping. • While resetting, you can start a new timing by pressing the upper right button (B). • The chronograph is also reset if you pull the crown out while timing.
Using the world time You can display a local time among 26 cities or UTC.
1. Pull the crown out to position 1.
012
The chronograph second hand indicates the daylight saving time setting.
2. Rotate the crown to select the city. Crown position
HKG T AD YO L
Crown
012
• Refer to the pages 8 and 9. • Adjust the position of the city name to the center of the window. • You can change the daylight saving time setting by pressing the lower right button (A). Refer to page 14.
3. Push the crown in to position 0.
㻣 Crown position
11
Using the alarm 1. Pull the crown out to position 2.
The chronograph second hand moves to indicate the alarm on/off setting while the hour and minute hands move to indicate the current alarm time setting.
012
Crown position
Crown
B 24 4
A
12
8
2. Rotate the crown to set the alarm time.
• The hands start to move continuously by rotating the crown quickly. To stop the rapid movement, rotate the crown. • Each time you press the upper right button (B), the “minute” and “hour” of the setting time changes alternately.
3. Press the lower right button (A) to turn the alarm “ON”.
• Each time you press the lower right button (A), the chronograph second hand indicates “ON” and “OFF” alternately.
4. Push the crown in to position 0.
• The alarm tone does not sound when the crown is pulled out.
12
To stop the alarm tone Press the upper or lower right button (A or B). • The alarm tone sounds for 15 seconds and then stop if a button is not pressed.
When using world time The alarm tone sounds based on the time of the selected city. • The alarm cannot be set for each city.
To confirm the alarm tone Pull the crown out to position 2 and press and hold the lower right button (A) for two or more seconds.
13
Setting the daylight saving time In regions where the daylight saving time (DST) is in effect, the time signal includes the daylight saving time check signal. • When “UTC” is selected as the city, you cannot change the setting.
1. Pull the crown out to position 1.
012
The chronograph second hand indicates the daylight saving time setting.
A Crown position 30
012
2. Press the lower right button (A) to change the daylight saving time setting.
• Each time you press the lower right button (A), the chronograph second hand indicates items in the following order: SMT AU → SMT MA → STD AU → STD MA → To the beginning
3. Push the crown in to position 0. Crown position
14
About the daylight saving time setting Select the daylight saving time setting to fit the implementation of the daylight saving time. Status
Setting
Clock indication
Daylight saving is not performed.
STD MA
manual
The watch always shows the standard time.
Daylight saving starts/ ends out of sync with the time signal.
SMT MA
manual
The watch always shows the daylight saving time. You need change the setting each time the daylight saving starts/ends.
auto
The setting changes between “SMT AU” and “STD AU” automatically.
Daylight saving starts/ SMT AU ends in sync with the time STD AU signal.
• The period of the daylight saving time varies from countries/areas. • SMT (summer time), AU (auto), STD (standard), MA (manual)
15
Notes on the time signal This watch receives the time signal from the five signal stations located in four regions and automatically adjusts the time and calendar. The receivable signal stations are listed as follows: Signal stations
Kind of the time signal
Signal station indication
JJY
JPN
Fukushima station, Japan Kyushu station, Japan Fort Collins station, Denver, Colorado, USA
WWVB
USA
Mainflingen station, Southeast Frankfurt, Germany
DCF77
EUR
BPC
CHN
Shangqui station, Henan, China
Refer to the maps on pages 17 to 19 to see the locations of the signal stations and their receivable area roughly.
16
JJY：
JJY：
Fukushima station
Kyushu station
17
WWVB：
Fort Collins station
18
DCF77： Mainflingen station
BPC：
Shangqui station
19
Receiving the time signal manually (On-demand reception) You can adjust the watch by receiving the time signal any time when the time is not correct or the reception result is “NO”. • You must be in an area that you can receive a time signal. • Before attempting on demand reception, be sure to reset the chronograph.
1. Ensure that the crown is in position 0. 2. Press and hold the lower right button (A)
012
for two or more seconds.
A Crown position 30
60 50
10
40
20 30
60
24
15
20
20
AD
The watch starts to receive the signal with the beep sound, and the chronograph second hand moves to “RX”. • It takes from two to 15 minutes for updating to complete. • The watch will not start to receive if the second hand is moving once every two seconds (this is the insufficient charge warning). • The signal station is changed depending on the selected city. • You can cancel the reception by pressing the lower right button (A) for two or more seconds.
Notes on indications for the time signal reception The chronograph second hand shows the current or last status of the reception. Status
Meanings
RX
Ready for reception.
H
Very good condition for reception.
M
Good condition for reception.
L
Not good condition for reception. Change the place for reception to indicate “H” or “M”.
NO
“H”, “M”, and “L” only indicate the condition for reception, and are not related to the performance of the watch.
The reception is unsuccessful. Date and calendar are not adjusted.
Some models shows the station indication in the different way. Indications Stations
JPN
USA
EUR
CHN
21
Notes on the reception of the time signal Receiving the time signal There are three ways to receive the time signal: Methods Automatic reception
Explanations Receives the signal at 2:00 a.m. every day. If reception is unsuccessful, then, the watch tries to receive at 3:00 a.m. and 4:00 a.m. Receives the signal when you want to adjust the time and calendar. See page
On demand reception
20.
Recovery automatic reception
Receives the signal automatically after charging when the watch stops due to an insufficient charge.
The chronograph second hand indicates the receiving result (success/failure, levels) and the minute hand indicates the receiving station. (See page 21.)
22
• Even when this watch receives a time signal successfully, the accuracy of displayed time will be dependent on the reception environment and internal processing. • If the watch is not able to receive a signal, it will operate normally within an accuracy range of ±15 seconds per month.
When receiving the time signal Remove the watch and place it on a stable surface where it can receive the signal better, such as next to a window. • The reception antenna is located at the 9:00 position of the watch. Place the watch with the 9:00 position facing toward the station. • Do not move the watch during the time signal reception. • The watch will not receive a time signal when in a low charge state as indicated by the second hand moving in two second increments (the insufficient charge warning). Charge the watch before reception.
23
Poor reception areas It may be difficult to receive the time signal properly under certain environmental conditions or in areas susceptible to radio noise. • Extremely hot or cold locations
• Near high-tension electrical lines, railway overhead wires or communication facilities
• Inside vehicles • Inside reinforced concrete buildings, between tall buildings, mountains, or underground
• Near electrical equipment or office appliances
24
• Near cellular phones that are in use
When signal reception is poor The surroundings near your house, such as high-tension electrical lines or structures may block the path to the signal location, this can cause a poor environment for receiving the time signal. With reference to pages 17 to 24, search for a better place for reception. Then, attempt to receive the time signal in the procedure on pages 20. • When the reception result is “L”, place the watch in another location so that “H” or “M” is indicated.
25
Setting the time/calendar manually You can adjust the watch manually when the reception fails or you are unable to receive a signal.
012
1. Pull the crown out to position 1. B
The chronograph second hand indicates the daylight saving time setting. • You can change the city by rotating the crown. Refer to the pages 8 and 9.
2. Press the upper right button (B).
Crown position
012
The chronograph second hand moves to the 30 second position.
3. Pull the crown out to position 2. Now you can adjust the watch.
4. Press the upper right button (B) Crown position
26
repeatedly to select the time or calendar for adjustment.
• Each time you press the upper right button (B), the item selection changes in the following order (the selected item moves a little to indicate the selection): Minute/Second hand → Hour/24-hour hand → Date → Year/Month → To the beginning
B
Crown
B
012
Crown position
5. Rotate the crown to adjust the selected item.
• When selecting the date and time for adjustment, the selected item starts to move continuously by rotating the crown quickly. To stop the rapid movement, rotate the crown. • When adjusting the date, rotate the crown clockwise (right). • The year and month are indicated by the chronograph second hand. Refer to the next page to adjust.
6. Repeat steps 4 and 5 to adjust the other items.
7. Push the crown in to position 0.
The setting of the time/calendar is complete.
27
Month and year indications The year and month are indicated by the chronograph second hand. Nov.
Dec. Jan.
Oct.
Leap year Sep.
Feb.
Aug.
Mar.
1st year since leap year
Jul.
Apr. Jun.
e.g. When it is March in the leap year
May
The position of the chronograph second hand shows the month.
28
2nd year since leap year 3rd year since leap year
Each minute mark denotes the number of years since a leap year.
The figure shows May in the 1st year from the recent leap year (e.g. 2009).
The figure shows September in the 3rd year from the recent leap year (e.g. 2011).
Quick reference chart for number of years passed since leap year Indication of the chronograph second hand
Passed year
Year
Hour marker
Leap year
1st min. marker
1st year
2012, 2016, 2020 2009, 2013, 2017
2nd min. marker
2nd year
2010, 2014, 2018
3rd min. marker
3rd year
2011, 2015, 2019
29
Adjusting the reference position • Before the operation below, be sure to reset the chronograph. • See the next page to check the correct position for each item.
012
B
1. Ensure that the crown is in position 0. 2. Press and hold the upper right button (B) for ten seconds.
The chronograph second hand starts moving. Then, all hands moves quickly to show the current reference position.
Crown position
3. Pull the crown out to position 2. 012
B
The reference position can now be adjusted.
4. Press the upper right button (B) repeatedly to select the item for adjustment.
Crown position
30
012
Crown
Crown position
• Each time you press the upper right button (B), the item selection changes in the following order (the selected item moves a little to indicate the selection): Chronograph minute hand/Date → Hour/24-hour hand → Minute/Second hand → Chronograph second hand → To the beginning
5. Rotate the crown to adjust the selected item.
HKG T AD YO L
㻟㻝 㻝
The correct reference position is when; • all hands are indicating 12:00; • the date indication is between “31” and “1”.
• The item starts to move continuously by rotating the crown quickly. To stop the rapid movement, rotate the crown. • When adjusting the date and chronograph minute hand, rotate the crown clockwise (right).
6. Repeat steps 4 and 5 to adjust the other items.
7. Push the crown in to position 0.
8. Press the upper right button (B). You have now completed adjusting the reference position.
31
Using the calculation scales 70 NAUT .
H
RX NO
0
0 7:0
JPN
13
US.
2:3
1
5
4
5
0
16
16
0 4:3
12
4
GA L. 1
1
1
6:00
0 IMP GAL.11
KM.
A EUR CHN 17
17
3:00
4:0
3:30
18 19 20 21 18
19 20
22
23
21 22
0
24
23
2 5
5
24
2
Crown for the scale
2:00
20 30
11
D ST AU
40
US
1:50
10
1:40
CHI N SC YC L
60 50
8
10
12
OFF
4
16
. LBS1
24 20
15
OIL
40
S. 8
90
L
30
5:00
LB
8 0
ALM
35
T.
1: 20
0 1:3
30
FU EL
ST A
0
M
60 45
SMT MA
30
70
1:1
90
35
8:0
0
55 9:00
ON
40
4
5
4 5
50
MA
32
60
55
0
S. 5 ER LIT
AU
Using the calculation scales, you can easily calculate the driving distance or general computing, etc. To rotate the scale, turn the crown for the scale. • You may need to add a decimal point depending on calculation results. • The illustration may differ from the actual appearance of your watch. • Some models do not feature the scale and the crown for the scale.
Scale
Calculating the navigation plan Required time A
4 5
22
0
ST A
0
23
T. 8
1:
20
0
7:
40
00
US .1
1:1
6:00
30
4:
5
16 S. 5 ER LIT
17
0
3:30
3:00
0 21 22
18 19 2
55
60
00
23
24
5
.8
2:
1 5
2
70
BS
4
4
0
1
0
4:
30
35
KM.
2:00
5:00
11
1:50
30
30
1:40
10
4
FU
EL
L
12
0
0 1:3
35
21
NAUT .7
9:00
90
IMP GAL. . 11 OIL LBS10
0 8:
19 2 0
5
90
50
18
2
3
G
4
1 L.
17
55
4 2
Answer
Align "18" on the scale to "▲". The answer "2:30" (two hours and 30 minutes) corresponds to "45" on the scale.
16
15
How long does it take an airplane flying at 180 knots Question to fly a distance of 450 nautical miles?
33
Speed (ground speed)
. AL
4 5
0
1:1
22
00
ST A
0
23
T. 8
1:
20
0
7:
40
00
US .1
21
NAUT .7
9:00
10
5:00
1
30
4:
5
4
5
16 S. 5 ER LIT
17
0
3:00
3:30
18 19 20 21
55
22
00
23
24
5
2
70
B
2:
4
0
4
1
0 S. 8
3 4:
0
KM.
35
2:00
30
11
1:50
FU
EL
L
60
34
30
1:40
6:00
12
19 2 0
0 1:3
35
8:
18
90
IMP GAL. . 11 OIL LBS10
50
17
55
5
90
16
2
3
G
15 14
4 2
What is the speed (ground speed) of an when it takes Question airplane 1 hour and 20 minutes to fly a distance of 240 nautical miles? Align “24” on the scale to “1:20 (80)”. The answer “18” (180 kt) on the scale corresponds Answer to “▲”.
Flying distance 18
19
17
50
6
1
T. 8
1:
20
0
7:
40
00
4
ST A
0
5:00
30 4:
16
4:
55
17
60
3:00
3:30
18 19 20 21
70
22
FU E L
00
23
24
LBS .8
0
5
2
9
30
5
0
2:
1
0
L.11
30
45
4
LIT ER S.
1
5
GA IMP
. 0 BS1
KM.
2:00
40
11
1:50
LL OI
35
1:40
10
6:00
3 GAL .1
00
0 1:3
US. 1
25
0
1:1
90
35
NAUT .7
9:00
0
12
8:
4 5
5
1
20 21 22 23 2 4
55
3
What is the flying traveled in 40 Question distance minutes at a speed of 210 kt? Align “21” on the scale to “▲”. The answer “14” (140 nautical miles) on the scale corresponds Answer to inner “40”.
35
Fuel consumption rate 20
17
4 5
20
0
7:
40
00
1:
5:00
KM.
2:00
2:
1
30
4:
5
6
0
16
17
3:00
3:30
18 19 20 21
70
FUEL LBS. 80
22
00
23
5
24
90
2
OIL LB
S1 .
P IM
5 5
4
1 L. 1 GA
3 4:
0
0
S. 5
1
0
36
45 LITE R
11
1:50
30
10
6:00
16
T. 8
40
15
00
ST A
0
35
35
0
0
1:1
1:40
AL US. 13 G . 14
8:
3
NAUT .7
55 9:00
0 1:3
12
24 25 22 23 21
50
1 8
19
90
If 120 gallons of fuel are consumed in Question 30 minutes’ flying time, what is the fuel consumption rate? Align “12” on the scale to “30”. The answer “24” (240 gallons per hour) on the scale Answer corresponds to inner “▲”.
Fuel consumption 0
21
2
9
18
4 5
T. 8
1:
20
0
00
17
ST A
0
7:
1:40
5:00
30
30 4:
4:
16
17
70
3:00
3:30
18 19 20 21
FU E L L B
S. 80
22
00
23
90 O
5
24
IL L
2
1 .
BS
L
30
5
GA
1 0
1 .1
2:
4
55
1
6
0I
US. 13
11 KM.
2:00
45 LITERS.5 0
1:50
12
10
6:00
40
00
40
16
1:1
0 1:3
15
0
9:00
90
35
8:
30
NAUT .7
55
50
1
GAL. 14
25 23 24
22
5 3
MP
How much fuel is consumed in 6 hours Question at a fuel consumption rate of 250 gallons per hour? Align “25” on the scale to “▲”. The answer “15” (1500 gallons) on the scale corresponds to Answer inner “6:00”.
37
Maximum flying hours 19
18
4 5
T. 8
1:
20
0
7:
40
00
15
ST A
0
6:00
10
1:40
12
5:00
3 4:
0
2:
1
30
4:
5
5
5
16
60
17
3:30
3:00
18 19 20 21
70
FU E L L B
S
22
00
23
24
5
2
L IL
0
4
5
1
TE RS .
G IMP
0
1
30
45 LI
AL.1
KM.
2:00
. 1 BS
40
11
1:50
O
0
9
.8 0
38
35
14
1:1
00
0 1:3
35
0
9:00
90
US. 13 G A L.
8:
NAUT .7
55
50
0
16
17
21 22 23 24 25 20
3
With a fuel consumption rate of 220 gallons per hour Question and a fuel supply of 550 gallons, what is the maximum number of flying hours? Align “22” on the scale to “▲”. The answer “2:30” (two hours and 30 minutes) Answer corresponds to “55” on the scale.
Conversion
19
20
50 00
ST A
0
T. 8
1:
20
0
7:
40
00
16
0
0
1:1
35
5:00
1
5 5
2:
4
1
30
4:
5
16
6
0
.11 AL
0
4:
30
30
KM.
2:00
45 LIT ERS .5
11
1:50
17
3:00
3:30
18 19 20 21
70
F U E L L B S . 80
22
00
23
5
24
90
PG IM
40
1:40
6:00
15
3
NAUT .7
9:00
10
35
22 23 24 25
55
0 1:3
2
OIL L
0
BS 1 .
US. 13 GAL. 14
8:
4 5
17
8 1
12
21
90
How do you convert Question 30 miles into nautical miles and kilometers? Align “30” on the scale to “STAT. (▲)”. The answer “26” (26 nautical miles) on scale corresponds Answer the to “NAUT. (▲)”, and the answer “48.2” (48.2 km) on the scale corresponds to “KM. (▲)”.
39
General calculations Multiplication Question 20 × 15
LL OI
9
0
50
.1
4
1
5
0
9:00
1:1
00
ST A
0
1
6
T. 8
0
20
00
1:
7:
.8
3 GAL
NAUT .7
FUE L
6:00
70
35
5:00
30
KM.
25
4:
30
60
11
2:00
1
2:
4
1
30
4:
5
3
0
16
17
3:00
3:30
18 19 20 21
35
22
00
23
5
24
45
55
10
1:50
20 21 22 23 24
1:40
2
5 0
LIT ER S.
40
40
19
40
US. 1
18
0
4 5
8:
12
55
0 1:3
L BS
AL.11
90
Answer
G IMP
17
Align “20” on the scale to inner “10”. The answer “30” (300) on the scale corresponds to inner “15”.
. 0 BS1
Division Question 250 / 20
70
1:
20
S1 .
0
00
0
LB
0
7:
5:00
4:
16
30
30
15
KM.
2:00
2:
4
17
1 1
1
30
4:
5
8
19
16
20
17
21
3:00
3:30
18 19 20 21
24 25 22 23
22
00
23
24
5
2
3
0
35
11
1:50
US. 13 GAL. 14
10
6:00
RS. 5
OIL T. 8
12
40
00
ST A
0
1:40
45 LITE
0
1:1
0 1:3
35
8:
90
NAUT .7
9:00
90
40
50
F U E L L B S . 80
55
. 11 AL
Answer
0
4 5
5 5
6
PG IM
Align “25” on the scale to inner “20”. The answer “12.5” (125) on the scale corresponds to inner “10”.
41
Ratios Question 30 / 20 = 60 / x FU
EL
0
1 1 2
T. 8 20
0
L. GA
00
1:
3
7:
14
5:00
4:
19
30
18
2:
1
21 22
30
4:
5
23
16
24
17
25
3:00
3:30
18 19 20 21
22
00
23
24
5
2
4
2
4
0
1
0
17
KM.
2:00
30
16
11
1:50
35
30
42
15
6:00
60
00
L.1
ST A
0
1:40
55
1:1
10
35
GA
0
9:00
0 1:3
. LITERS 50
0 IMP
NAUT .7
55
90
40
4 5
8:
90 OIL LBS1 .
. 80
50
7
45
LB S
.1 US
Answer
Align “30” on the scale to inner “20”. The answer “40” (40) corresponds to “60” on the scale. In addition, the ratio of the value on the scale to the inner value is 30:20 at all positions on the scales.
Square root Question 225 FU
0
8:
00
1
2
T. 8 20
0
00
1:
7:
14
6:00 5:00
4:
19
30
18
2:
4
0
2
1
21
1
30
4:
5
23
16 24
17
25
3:00
3:30
18 19 20 21
30
22
00
23
24
5
2
35
0
17
KM.
30
16
11
2:00
4
15
10
1:50
22
60
1
ST A
0
L. GA
40
1:1
3
55
GA L.1
0
9:00
1:40
35
0 IMP
NAUT .7
55
0 1:3
. LITERS 50
90 OIL LBS1 .
. 80
90
45
LB S
50
4 5
7
EL
.1 US
Answer
Rotate the scale so that an inner value to “22.5” on the scale is equal to a value on the scale to inner “10”. The value “15” is the answer.
43
Notes on charging your watch This watch has a rechargeable cell which is charged by exposing the dial to light such as direct sunlight or fluorescent lamps.
For optimal performance: • Expose the watch with the dial towards direct sunlight for several hours at least once a month. • After taking off the watch, put it in a position so that the dial is exposed to bright light, such as by a window. • Before storing the watch in a dark place for an extended period of time, be sure to charge it fully. When the watch is regularly covered with long sleeves, it may not be charged sufficiently. Try to keep the watch exposed to light sufficient for charging. Do not charge the watch at a high temperature (about 60˚C/140˚F or higher).
44
When the watch reaches a low charge state—insufficient charge warning function When the power reserve becomes low, the second hand moves once every two seconds—This is the insufficient charge warning function. Charge the watch by exposing the dial to light. • After the watch is charged, the second hand will move normally. See page 46. • If you have not charged the watch for six days or more since the insufficient charge warning movement began, the watch will run out power and stop. Caution When the second hand moves once every two seconds, you cannot use any functions— chronograph, alarm, etc.—except the time indication.
60 50
10
45
Charging time by environment Below are the approximate times needed for charging when exposing the watch dial to light continuously. Please use this table as a reference only. Environment
time to work for Illuminance (Lx) Chargingone day
Under direct sunlight or cloudy weather 10000 to 100000
Charging time to start working normally when the rechargeable cell is empty
3 to 12 minutes
2 to 3 hours
20 cm under a fluorescent lamp (30 W)
3000
45 minutes
6.5 hours
Interior lighting
500
4 hours
35 hours
Your watch will run approximately eight months from a full charge or up to four years with the power save feature engaged.
46
Power save feature When the watch is not exposed to light for more than six days such as when you store it in the dark, all hands automatically stop to save the power. • When the crown is pulled out, the power save feature will not activate.
To cancel the power save feature When the watch is exposed to light sufficient for charging, the power save feature is automatically disengaged and normal time indication will resume.
47
Troubleshooting If you have a problem with your watch, check the table below. Symptoms
Remedies
Page
Problems with time signal reception. Push the crown in to position 0.
Reception is unsuccessful in a receivable area.
Avoid things likely to interfere with a time signal and place the watch with the 9:00 position facing toward the station. Do not move the watch until the reception is finished. When the second hand moves once every two seconds, the watch cannot receive the time signal. Charge the watch.
48
−
22, 23 22 −
Symptoms
The correct time and calendar are not indicated after successful reception.
Remedies Check the city setting. Check and correct the reference position.
Page
−
30
The hands do not work properly. Some hands moves unintentionally.
Stop the chronograph.
10
The second hand moves once every two seconds.
Charge the watch.
44
Push the crown in to position 0.
All hands stop moving.
Charge the watch by exposing it to direct sunlight for five or six hours. After charging, the watch starts to receive the time signal automatically (automatic recovery reception).
−
44
49
Symptoms
Remedies
Page
The hands do not work properly. The hands start turning rapidly as you take it out of the case.
The watch is canceling the power save feature. Wait until the rapid movement stops.
47
The time and/or date is not correct. Check the city setting.
The time and/or date is wrong.
50
−
Change the daylight saving time setting.
14
Check and correct the reference position.
30
Receive the time signal to adjust the time and date.
20
Set the time and date manually.
26
Symptoms
The date changes at around 12:00 p.m.
Remedies
Page
Check and correct the reference position.
30
Receive the time signal to adjust the time and date.
20
Adjust the time by 12 hours manually.
26
Charge the watch by exposing it to direct sunlight for five or six hours. Though the trouble is not solved after charging, contact your nearest Authorized Citizen Service Center.
44
Others The watch does not move even if the watch is charged.
Push the crown in to position 0.
The alarm tone does not sound on time.
Check the city setting. Check the power reserve level.
−
11, 12 44
51
Resetting the watch The watch may not work properly if it is affected by static electricity or shock. In this case, you must reset the watch. Charge the watch before resetting if the power reserve level is low.
012
1. Pull the crown out to position 1. PDL U LO TC N
㻣
Crown position
012
Crown position
52
The chronograph second hand indicates the daylight saving time setting.
2. Rotate the crown to select “UTC”.
• Adjust the position to the center of the window.
3. Pull the crown out to position 2. 4. Press the upper and lower right buttons (A and B) simultaneously.
The confirmation tone sounds and the watch is reset. The current position of all the hands is set as the new reference position.
After resetting the watch You must set the watch again in the procedure below.
1. Select a city.
See page 11. • You can change the daylight saving time setting. Refer to page 14.
2. Adjust the reference position correctly. See page 30.
3. Adjust the time/calendar. Refer to page 20 to adjust the watch by receiving the time signal, refer to page 26 to adjust manually.
53
Precautions Warnings Handling the rechargeable cell • Do not remove the rechargeable cell. If it is removed, keep the rechargeable cell out of the reach of children to prevent ingestion. • If the rechargeable cell is swallowed, consult a doctor and seek medical treatment.
54
Cautions About charging • Excessively high temperature when charging the watch may cause discoloration and deformation of the components, and result in malfunction of the movement. • Do not charge the watch at a high temperature (about 50˚C/122˚F or higher).
Example: - charging the watch too close to light such as an incandescent lamp or halogen lamp (Halogen lights are not recommended for charging due to their high heat output.) - charging the watch in locations where the temperature may become extremely high—such as on the dashboard of a vehicle
55
To avoid injury • DO NOT wear the watch where the temperature becomes extremely high—such as in a sauna. The watch may become hot and burn the skin.
To avoid malfunction • DO NOT use the watch where the temperature is lower or higher than the operating temperature specified in this manual. Doing so may cause the watch to malfunction or stop. • DO NOT place the watch nearby any materials generating a strong magnetic field such as: – magnetic health equipment such as a magnetic necklace – a magnetic latch of a refrigerator door – a magnetic clasp on a handbag – a magnetic coin tray – speakers of a mobile phone – electromagnetic cooking devices They may interfere with function of the movement in the watch causing it to stop or operate erratically. • DO NOT place the watch on or nearby household appliances that generate static electricity such as Televisions or computer monitors. The timekeeping may be affected. • DO NOT apply any strong shock, for example, by dropping it onto a hard floor.
56
• Avoid using the watch where it may be exposed to chemicals or corrosive gases. If solvents, such as thinners or benzine, or substances containing such solvents come in contact with the watch, discoloration, melting, cracking, etc. may occur. The case, band, or other parts may become discolored if the watch comes into contact with some household chemicals mercury that may be found in thermometers.
57
Warnings on water-resistance performance • Water-resistance for daily use: This type of watch is resistant to minor exposure to water such as accidental splashing. For example, you may wear the watch while washing your face; however, it is not designed to be used underwater. • Upgraded water-resistance for daily use (tested to 5 bar): This type of watch is resistant to moderate exposure to water. You may wear the watch while swimming; however, it is not designed to be used for skin diving. • Upgraded water-resistance for daily use (tested to 10 or 20 bar): This type of watch may be used for skin diving; however, it is not designed to be used for scuba or saturation diving. • Before use, confirm the water-resistance level of your watch indicated on the dial and case, referencing the table on the next page. (The unit “bar” is roughly equal to 1 atmosphere.) • “WATER RESIST(ANT) xx bar” may also be indicated as “W.R. xx bar.”
58
Examples of use
Names
WATER RESIST(ANT) or no indication
Indication (Case or back)
WATER RESIST(ANT)
Moderate exposure to water (washing, kitchen work, swimming, etc.)
Marine sports (skin diving)
✓ ✓ ✓
– ✓ ✓
– – ✓
Specifications
Water resistant for daily use
WATER WR 50 or WATER RESIST(ANT) RESIST 50 5 bar
Water resistant to 5 atmospheres
WR 100/200 or WATER RESIST 100/200
Water resistant to 10/20 atmospheres
WATER RESIST(ANT) 10/20 bar
Minor exposure to water (washing face, rain, etc.)
59
Cautions on exposure to water • Be sure to use the watch with the crown pressed in fully (normal position) to ensure the water resistance. If the crown of your watch is the screw down crown, be sure to tighten it completely. • Do not operate the crown or buttons when the watch is wet. • If water has penetrated the watch, or if the inside of the glass is fogged up and does not become clear in a day, take the watch to your dealer or Citizen Service Center for repair. Leaving the watch in such a state will rust the internal parts and cause malfunction. • If seawater penetrates the watch, place the watch in a box or plastic bag and immediately take it in for repair. Otherwise, the pressure inside the watch will increase, and parts (glass, crown, buttons, etc.) may come off. • If the watch is used in seawater, rinse with fresh water afterward and wipe with a dry cloth after each use.
60
Keep your watch clean • Keep your watch clean to prevent rust or dirt building up as this may stain your clothes, damage the watch or appear as black residue on your wrist. Depending on use, occasional cleaning of the exterior of your watch may be necessary. • Wipe dirt off the leather band with a soft and dry cloth to prevent it from discoloring.
61
Maintenance Daily maintenance • Rotate the crown while it is pressed in fully and press the buttons periodically so they do not become stuck due to accumulations of foreign matter. • Wipe off dirt, perspiration, and water from the case and glass with a clean soft cloth occasionally. • To clean a metal, plastic, or rubber watchband, wash away dirt with water. Use a soft brush to remove dust and dirt stuck in the gaps in a metal band. • Do not use a polishing type of cloth as this may damage the surface and certain treatments. • Do not use solvents (thinner, benzine, etc.), as they may damage the finish.
Periodical inspections Your watch needs an inspection once every two or three years for safety and longer usage. To keep your watch water-resistant, the gaskets and other components need to be replaced regularly. Other parts need to be inspected and replaced if necessary. Always ask for genuine Citizen parts upon replacement.
62
Information The time signal The time signal is broadcast almost continuously 24-hours a day, but may occasionally be interrupted due to maintenance. The broadcasting conditions of the time signal can be checked on the station web site. The time signal has no effect on the human body or medical equipment.
63
To avoid hand misalignment by impacts or magnetism Impact detection function: This function prevents unwanted movement of the hour, minute and second hands when the watch receives an impact. Hand correction function (hand reference position auto-correction function): The reference position of the hands is checked at regular intervals, and if there is any misalignment, the hour, minute and second hands are rapidly corrected to maintain the correct time.
64
Luminous dials and hands The paint on the dial and hands helps you with reading the time in a dark place. The luminous paint stores light (daylight or artificial light) and glows in a dark place. It is free from any radioactive substance or any other material harmful to a human body or environment. • The light emission gradually becomes weaker as time passes. • The duration of the light (“glow”) will vary depending on the brightness, types of and distance from a light source, exposure time, and the amount of the paint. • The paint may not glow and/or may dissipate quickly if exposure to light was not sufficient.
65
Specifications Model Timekeeping accuracy Operating temperature range
H61*
Type
Analog solar-powered watch
Within ±15 seconds per month on average (when worn at normal temperatures between +5˚C/41˚F and +35˚C/95˚F without the time signal reception) −10˚C/14˚F to +60˚C/140˚F
Display functions
Time: Hours, minutes, seconds, 24 hours, City: Three cities, Calendar: Date, Power reserve level: four degrees, Receiving stations: five stations in four regions (JJY: Japan, WWVB: USA, DCF77: Germany, BPC: China)
Battery duration without recharging
• Fully charged to fully discharged Approx. four years (from a full charge with power save feature engaged) Approx. eight months (from a full charge without power save feature engaged) • Two seconds interval movement to stopping: Approx. six days
Battery
66
Rechargeable cell, 1pc.
Additional functions
• • • • • • • • • • • • • •
Power reserve indication Overcharging prevention function Insufficient charge warning function (two-second interval movement) Energy saving function (power save feature) Receiving time signal (automatic, on demand, automatic recovery) Confirming reception status (RX, H, M, L, and NO) Indicating the result of the last reception Automatic selection of time signal stations Daylight saving time (SMT AU/MA, SDT AU/MA) Chronograph (up to 60 minutes by 0.2 seconds) World time (26 cities and UTC) World time alarm Perpetual calendar (until February 28th, 2100) Correcting reference position
Specifications are subject to change without prior notice.
67
