Transcript
Quick Start Guide V1.10
1
THANK YOU Thank you for purchasing the Villain™ by Monster Digital! This Quick Start Guide will help get you using your camera in no time.
We hope you will be able to take awesome videos and
amazing photos with your Villain. Feel free to share them with us and we might post them on our website, YouTube™ channel, Facebook, Instagram etc. If you ever have any issues or want to learn more, please reach out to us through any number of means all listed on our website. We will get your question answered or problem solved right away. Also be sure to register your camera at www.MonsterDigital.com Please be safe and have tons of fun!
- The Villain Team at Monster Digital 2
FEATURES AND BUTTONS
Lens IR receiver (for optional remote)
Charging or Recording LED
Power on or Recording LED
Display/Menu Button
LCD Display Microphone
3
FEATURES AND BUTTONS
Power/Mode
OK/Shutter
button
Battery Door
Speaker WiFi Indicator/ MicroSD Card Slot
Down Button
Micro USB Port
Mini HDMI Port 4
Before Using the Camera 1. Charge the battery
USB cable
To charge, connect the camera to a 1-amp minimum USB power source with a micro USB cable. The charging indicator will be in on when charging and will turn off after charging. It takes 2-4 hours to fully charge the battery. It is a Lithium-ion battery.
5
2. Insert memory card (up to 32GB microSD) Push the microSD card into the slot until it clicks. To remove the card, push it in slightly and it will pop out.
BE SURE TO BACK-UP YOUR FILES ON A COMPUTER OR OTHER STORAGE DEVICE! 6
3. Turn it on To turn ON press and hold the power/mode button for 3 seconds.
To turn OFF the camera press and hold the power/mode button for 3 seconds when the camera is not recording When the battery is very low, this icon
will appear.
When the battery is out of power the icon turns red and flashes. Finally, the camera turns off automatically. The camera will record for approximately 2.5 hours based on Monster Digital engineering testing. See chart on page 21. Actual performance may vary based on settings, environmental conditions and other factors. Maximum battery capacity will normally decrease with time and use. 7
4. Camera Modes The camera has 4 modes - video, photo, dash-cam, and playback. After the power is on, press power/mode button to cycle through each mode.
Video mode
Dash-cam mode
Photo mode
Playback mode Note: When you power down, the current mode will be remembered. The next time you power up the camera it will be in the same mode. 8
5. Video Mode When powered on and in video mode press the OK/shutter button to start recording, Press it again to stop recording. If the memory card is full or battery is low, it will stop recording automatically. DISPLAY 1. Icon of mode, indicating video recording mode; 2. Indicate quality of video; 3. Resolution and Frame Rate FHD 1080p(30fps) / HD 720p(60fps) / HD 720p(30fps) 4. Recording time available 5. Battery capacity
9
6. Dash-cam Mode When powered on, press the power/mode button to select dash-cam mode. In dash-cam mode the camera continuously creates files three minutes long. When the memory card is full, the oldest file will be overwritten then the next, etc. in a continuous loop. DASH-CAM AUTO ON After choosing dash-cam mode, turn the camera off and connect a USB cable to the camera and a switched power outlet that is on when the car is on.
The camera will automatically
start recording when the ignition is turned on.
DISPLAY 1. Car icon indicates dash-cam mode 2. Video Quality 3. Resolution 4. Recording time left 5. Battery capacity NOTE: Dash came mode is set up inverted for mounting near rearview mirrors. easily be flipped in software like QuickTime (under “edit” select “flip vertical”). 10
Videos can
7. Photo Mode With the power on press the power/mode button to select photo mode. Press the OK/shutter button to take a picture. PHOTO MODE DISPLAY ICONS 1. Photo mode icon 2. Image size in Mega Pixels 3. Photo quality icon 4. Counter, indicating number of photos left 5. Battery capacity
11
8. Playback Mode With the power on press the power/mode button to select View mode then chose the type of files to view.
SELECT CAR - to play videos recorded in dash-cam mode VIDEO - to play videos JPG - to view photos
12
9. Viewing Videos
DISPLAY ICONS IN VIDEO PLAYBACK MODE 1. View Mode icon 2. Number of the current video and the total number of videos 3. Total video time 4. Date and time of the video 5. Playback time When playing a video push the OK/shutter button to pause. Push the DISP./MENU button to stop.
13
10. Viewing Photos DISPLAY ICONS IN PHOTO PLAYBACK MODE 1. View mode icon 2. Number of the current photo and the total number of photos Press the down/WiFi button to advance to the next photo. (There is no button to go backward to view the previous photo)
14
11. Screen Saver To save power the display can turn off automatically. You can select the length of time the screen is on before it goes into Screen Saver mode.
The LED on the upper left will indicate the camera is on when the display is off.
15
12. Settings There is a different menu for each mode as shown below:
Video Mode
General Settings
Photo Mode
Press DISP/MENU Menu button to view the menu Press POWER/MODE button to tab right Press WIFI/down button to move the cursor down Press OK/shutter button to confirm and press Menu button to return or exit
16
Play Mode
13. Playback on an HDTV You can connect your Villain to an HDTV with a mini HDMI cable.
When connected and
powered on you can view all the photos and videos available on the camera’s memory card.
17
14. The Apps From Google Play™ or the App StoreSM download “SYMAGIX2” and install them or scan these codes.
After installing the application, press the WIFI button on the Villain and the Screen will say “Waiting for WiFi Connection…” On your mobile device WiFi settings select VILLAIN When connecting for the first time, enter the password: monster. The Villain will then display “WiFi Connection Ready!” Tap the
icon on your mobile device to open the app and control the Villain.
18
iPhone/iPad Screen View
1. Resolution 2. White Balance Settings 3. Settings Menu 4. View-Mode Button 5. OK/Shutter Button 6. Photo Mode 7. Video Mode 8. Wi-Fi Signal 9. Villain’s Battery Status
To download videos and photos directly to your mobile device press the View-Mode button, hit Choose, select the file then download by pressing the up arrow at the bottom right of the screen. After the file is downloaded to your device use an app like iMovie to edit and then upload to Facebook and YouTube. 19
Android Screen View
1. Villain’s Battery Status 2. Resolution 3. White Balance Settings 4. Settings Menu 5. View-Mode Button 6. OK/Shutter Button 7. Photo Mode 8. Video Mode
To download videos and photos directly to your mobile device press the View-Mode button, select, then download. After the file is downloaded to your device use an app to edit and then upload to Facebook and YouTube. 20
Battery Life, Recording Times, Number of Photos Battery Life, Hours: Minutes
Resolution/Refresh rate 1080P30 720P60 720P30 2:45 2:50 3:20
Battery Life (WiFi off) Battery Life (WiFi on/WiFi off)*
1:15/1:00
1:20/1:00
1:40/1:00
Recording, Hours: Minutes 8GB Recording time 16GB Recording time
1:15 2:30
1:40 3:20
1:50 3:40
32GB Recording time
5:00
6:40
7:20
8MP 4,000 8,000 16,000
5MP 6,400 12,800 25,600
3MP 7,200 14,400 28,800
Number of photos 8GB card 16GB card 32GB card
12MP 2,800 5,600 11,200
10MP 3,200 6,400 12,800
Based on Monster Digital Engineering Testing. All testing done in super fine mode. *Wi-Fi works when battery is >40%. Second time is with Wi-Fi off. Actual performance may vary based on settings, environmental conditions and other factors. Maximum battery capacity will normally decrease with time and use. 21
Specifications Image Sensor Function Modes Lens Display
5.0 Million Pixels Video Camera, Dash-cam, Photo and View F2.4, f=3.1mm 2.0 inch LCD Screen
Photo Definition
12MP, 10MP, 8MP, 5MP, 3MP
Video Definition
FHD (1920x1080 30fps), HD (1280x720 30fps), HD (1280x720 60fps)
Storage Media File Formats USB Port Power Language Auto Shut-down Dimensions
microSD Card (up to 32GB) Video - MOV (H.264), Photos - JPG USB 2.0 External, 3.7V1200mAh rechargeable lithium battery English、Simplified Chinese、Spanish、Portuguese、German、Italian、 French、Dutch 1, 3, 5, minutes or OFF 59 W x 44 H x 25.5 D, 2 5/16” W x 1 ¾” H x 1 D, 74g 2.55oz w/battery
22
System Requirements Operating System
MSDC
Microsoft Window 2000，XP, Vista, 7，8, 10 Mac OS X version: 10.0.0 or above
CPU Intel Pentium of more than 1GB Hz or equivalent Internal Memory Larger than 1GB Sound Card and Video The sound card and video card supports DirectX8 or higher Card CD Driver Speed of 4x or faster Hard Disk Free space of more than 2GB USB One available USB 2.0 or 3.0 port
23
Safety Precautions for the Lithium Ion Battery The included lithium-ion battery comes partially charged. No damage occurs to the camera or battery if used prior to a full charge. See monsterdigital.com/LithiumIonBatterySafety for more battery safety information. The temperature range over which the battery can be charged is 10C to 40C CAUTION
(50F to 104F). Charging outside this range may cause the battery to become hot or damaged. This may also impair the battery’s performance or reduce its life expectancy.
Do not expose camera to direct sunlight (heat) for extended periods. When
charging the camera in a vehicle be sure to always disconnect the camera from the power source when the vehicle is not in use. The operational temperature range of the battery is -10C to 60C (14F to CAUTION
140F). Use of the battery outside of this range may damage the performance of the battery or reduce its life expectancy. Refer to the camera’s manual for the camera’s operational temperature range.
WARNING
Do not use the camera or the battery if it has been damaged. Disassembling or puncturing the battery can cause an explosion or fire.
24
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Use of a shielded cable is required to comply with class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modification to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment.
25
INDUSTRY CANADA STATEMENT IC Notice to Users English/French in accordance with RSS GEN Issue 4: This device complies with Industry Canada license exempt RSSs. Operation is subject to the following two conditions: 1.
This device may not cause interference; and
2.
This device must accept any interference, including interference that may cause undesired operation of the device
3. Cet appareil est conforme avec Industrie Canada RSS standard exempts de licence (s). Son utilization est soumise à les duex conditions suivantes: 1.
Cet appareil ne peut pas provoquer d’interférences; et
2.
Cet appareil doit accepter toute interference, y compris les interferences quipeuvent causer un mauvais fonctionnement du dispositive
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada REGULATORY INFORMATION To see the complete list of country certifications, visit http://www.monsterdigital.com/
26
Monster Digital, the Monster Digital logo, Monster Vision, the Monster Vision logo, and Villain are trademarks or registered trademarks used under License by Monster Digital, Inc., or its subsidiaries in the U.S. and other countries. iPhone and iPad are trademarks of Apple
Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Windows and Vista are registered trademark of Microsoft Corporation in the United States and other countries. Android and Google Play are trademarks of Google Inc. Trademarks and registered trademarks are property of their respective owners.
1-year Limited Warranty – See website for details www.MonsterDigital.com/warranty
©2016 Monster Digital P.O. Box 941774 Simi Valley, CA 93094
27
