Transcript
Table of Contents Quick Start Guide for USB 2.0 4 Port Mobile Battery Powered Hub
Model No. CP-H420MP
This Battery Powered USB Hub makes the most of your notebook computer and workspace by increasing the number of available USB ports. The need for an AC Power Adapter is eliminated by Battery Power. There has never been a more convenient way for travelers and notebook users to utilize USB devices on the road.
Introduction
1
System Requirements
2
Package Contents
2
Specifications - USB Battery Powered Hub
3
Specifications - Rechargeable Battery
4
Product Overview
5
Installation
8
Appendix A (Troubleshooting)
11
Appendix B (Radio Interference Statement)
12
Appendix C (Product Limited Liabilities Warranty)
13
Thank you for purchasing a
product. To enjoy all the features and benefits
of this USB Hub, please read and follow all installation and operation instruction completely.
Introduction
System Requirements
USB(Universal Serial Bus) is currently the standard for most computers, notebooks and
Any PC or Macintosh computer with an available USB port and USB-compliant operating
peripherals. The USB connections allow the user to easily connect multiple devices. The
system(Windows 98SE/2000/ME/XP, MacOS 8.6 or above, etc.)
USB 2.0 4 Port Mobile Battery Powered Hub (Model. CP-H420MP) provides additional ports to connect up to 4 USB devices to a single USB port on your computer. Thanks to the innovative Battery Power design it is unnecessary to use an AC Power Adapter. The Mobile Battery Powered Hub is the best choice for mobile computer users requiring a USB hub. The Quick Start Guide contains easy instructions in order to show you how to set up and start using your
USB 2.0 4-Port Mobile Battery Powered Hub
Package Contents
Specifications
This package includes: USB 2.0 4 Port Mobile Hub (Model CP-H420MP) 4 AAA Ni-MH Rechargeable Batteries 1.5m A Male-A Female USB Cable
Downstream Power Battery Discharge
Power Mode Output Voltage(per port) Output Currect(per port) Operating Temperature Storage Temperature Humidity Housing Weight Dimensions
User Manual
Specifications - Rechargeable Battery FUNCTION Battery Type Nominal Voltage Nominal Capacity Charge Condition Storage Temperature Nominal Dimension (With Sleeve) Weight
FUNCTION USB Ports LEDs
SPECIFICATION 4 1(Blue) 1(Red) Self-Powered +5V DC 500mA(max) 5°C~40°C -20°C~60°C 0~80%RH. Noncondensing Plastic 65.7 65.0 x 99.0 x 18.0 mm
Product Overview
SPECIFICATION Rechargeable Ni-MH Cylinderical Cell +1.2V 650mAh 100mAmp (0.15C) -20oC ~ 35oC 44.5 x 40.6 x 10.5 mm 48 g
Note: Please charge before use. The batteries are delivered in an uncharged state.
Product Overview - continued
First Use - Charge BatteriesSelf-Power the Hub:
1) Power Indicator - Blue LED will illuminate when USB Hub is receiving power.
When using this Hub the first time, charge the Ni-MH batteries at least 6 hours.
2) Battery Power Switch - Switch on battery power when extra power is needed for
1) Insert the included batteries (4) into the Hub.
connected USB devices. This switch activates self-powered mode. 3) Battery Discharge Indicator - Red LED will illuminate to indicate when the batteries are in use. If the batteries are fully discharged, the Red LED will not illuminate. 4) Downstream Ports - Connect your USB devices to these 4 ports.
2) Plug the USB connector into an unused USB port on your computer. 3) Make sure that the Battery Power Switch is in the OFF position and your computer is ON. Batteries will be fully charged in approximately 6 hours.
5) USB Connector (A type) - Plug the USB Connector to an unused USB port on your computer to provide a link between the USB hub and connected USB devices. 6) Battery Cover - Remove cover and insert four (4) rechargeable Ni-MH batteries that are included in the package in order to use your Hub under Self-Power mode. 7) AC Power Adapter Connection - An AC Power Adapter (Output: 5V DC 2.6Amp) (Sold separately. Please contact your original purchasing dealer and retailer) may be used as an alternative to battery power when an AC wall outlet is available. Connect the USB Hub to the optional AC Power Adapter. It will operate in Self-Power mode.
Warning! In order to maximize the battery powered hub as well as to avoid any unsafe situation, please do not use dry battery and any other kinds of rechargeable battery!!
Installation
Installation - continued
This USB Hub is a plug-and-play device. Your computer will display the ADD NEW
Self-Power the Hub:
Hardware Wizard after connecting the hub to your computer. Installation may be done
Using Battery Power:
whether your computer is powered on or off. It is not necessary to restart your computer
If the connected devices work properly, keep the Battery Power Switch OFF in order to
after installation.
conserve battery power! If the connected devices function erratically or require additional power, turn the Battery Power Switch ON to activate Self-Power mode.
1) Plug the USB Connector into an unused USB port on your computer. 2) Please use the included USB extension cable if the attached USB Connector is too short.
Note:
3) Connect your USB devices to the Downstream ports on the USB Hub.
Depending on the equipment being powered, your Mobile Battery Powered Hub’s rechargeable Ni-MH battery have to be replaced or recharged at 3-5 hours of continuous use.
Appendix B
Appendix A Troubleshooting Possible Cause Problem Unit operates Erratically. Static electricity may cause the hub to behave erratically. Connected USB devices USB devices operate may require too much erratically or can’t be power for bus-powered powered on. operatically. Batteries may need Unit fails to provide replacement. Battery power Non-USB compliant Unit fails to operate and operating system. is not recognized by the operating system.
Action Reset the hub by disconnecting it from your computer. Wait 5 seconds, then reconnect it. Set the Battery Power Switch to the ON. position for Self-Power mode.
Radio & TV interference Statement This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequence energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio
Replace batteries with standard Ni-MH AAA rechargeable batteries. Insure that your computer is fully USB-compatible and a USBcompliant operating system is installed.(see System Requirements section)
communications. There is no guarantee, however, that interference will not occur in a particular installation.
Appendix C Product Limited liabilities Warranty CyberPower warrantys this USB Hub (the Hub) that warranty period is 2 years after purchasing date, any product defect, problem and etc. Please contact your original purchasing dealer and retailer. They will provide you the service. If a defect results in product failure during its normal use, CyberPower’s sole responsibility is to repair or replace(at its sole option) the Hub. To make a Limited Warranty claim: 1.Pack and ship the Hub to original purchasing dealer retailer. 2.Clearly indicate on the outside of the packaging that this is a WARRANTY RETURN; 3.Clearly include your name and address (a) on the outside packaging and (b) one photo copy of original invoice or receipt enclosed in the box with the Hub that is being returned 4.You MUST prepay all shipping costs and you are responsible for packaging and shipment. Contact Information: You may also visit CyberPower on the Internet at www.cpsww.com.au or send E-mail to
[email protected]
CyberPower Systems B.V. E-mail :
[email protected] web: www.cpsww.com.au Entire contents copyright©2005 CyberPower Systems, Inc. All rights reserved. Reproduction in whole or in part without permission is prohibited. K01-H420MP10
