Tablet Enclosure Setup Sheet

Transcript

Tablet Enclosure Setup Sheet Components Provided Adaptable Rubber Spacers Qty.: 2 included for MMF-TE08 Qty.: 4 included for MMF-TE10 P/N: 632253504 * For specific placement with individual tablet model visit mmfpos.com 3.5mm F/M Audio Jack Extension Cable Size: 17" long Qty.: 1 P/N: 64125DL00 Credit Card Reader Bracket Kit Qty.: 1 Plate, 2 screws P/N: 531999004 (plate) 821055900 (screws) Cash Drawer Top Surface Mount Hardware Kit Qty.: 3 #8 screws, 3 #8 nuts Tools Required • Pencil • Wrench • 3/16” drill bit • Phillips head screw driver and power drill will be required to mount stand to desired surface (if necessary). Hardware is only provided for top of cash drawer integration. Hardware is NOT included for any other mounting surfaces – screws need to suit specific desktop or platform thickness. Assembly Instructions Tablet Enclosure Case (Top view inside) STEP 1 Firmly secure the base stand to a flat surface with appropriate fasteners. Enclosure case lid a. Three (3) #8 screws and three (3) #8 nuts are provided for mounting stand on top surface of a cash drawer. b. Remove the cash till and inner drawer from cash drawer housing. c. Adjust stand and mark hole positions with pencil. d. Drill holes on top of cash drawer. e. Firmly secure the base by bolting three (3) screws through the base plate and securing with nuts from under the top surface of the cash drawer. Enclosure case Adaptable rubber spacers 3.5mm audio jack extension cable Credit card reader bracket  OTE: Hardware is only provided for top of cash drawer N integration. Hardware is NOT included for any other mounting surfaces - screws need to suit specific desktop or platform thickness. Power cable management opening Patent-pending spring-loaded mechanism Kensington® Security Slot STEP 2 Base stand Open the enclosure lid. Unlock the tubular lock located on the back side of the case with the keys provided. Lift the lid. STEP 3 Mount optional credit card reader bracket kit. The bracket prevents the credit card readers from rotating while swiping cards; it has been designed as a reversible solution to allow integration of various card reader models. Tablet Enclosure Case (Back view) Align the bracket to the two hole openings on the outer top-right side of the enclosure case. Fasten with the two (2) screws provided in the kit from the inside of the enclosure case. VESA® mounting pattern (75mm & 100mm) Openings to attach Credit Card Reader Bracket a. Attach female end of audio extension cable. Detach the nut provided on the female end of the 3.5mm audio jack extension cable. Place the female end through audio jack hole. Secure the female end of the 3.5mm audio jack extension cable with nut. (75 x 75mm) Power cable management opening (100 x 100mm) Tamper-proof cable tie opening b. Attach male end of audio extension cable. Connect male end of the 3.5mm audio extension cable to tablet audio port and coil cable as needed within the enclosure. Connect any power cables and route them as necessary using cable openings within the enclosure design. Keyed-Tubular lock Tablet Enclosure Case STEP 4 (Side view) Insert tablet. Nest the tablet inside the enclosure by pressing down against the adjustable spring-loaded bracket. Adaptable rubber spacers are provided to reposition and align screen location to the enclosure case lid opening. case  OTE: For specific placement of adaptable spacers Enclosure N with (right side view) individual tablet model visit mmfpos.com. Ventilation openings Ventilation openings Enclosure case (right side view) 3.5mm audio jack port 3.5mm audio jack port 360° rotation for Swivel-MAX™ technologyportrait allows or landscape 360° rotation for portrait or orientation landscape and optimized viewing orientation and optimized viewing angle Kensington® Security Slot angle. For parts and/or additional accessories, contact your supplier or visit www.mmfpos.com Kensington and VESA are trademarks and registered trademarks of their respective owners. MMF POS is not associated with any of the aforementioned third party companies. Kensington® Security Slo Base Stand Base stand ENC Instructions Mounting holes 532011200 7/30/14 Mounting ISO 9001-2008 1402028E