Transcript
LED light engine / OLED LED linear / area
Umodule STARK LLE-G3-24-280-2000 CLASSIC, LLE-G3-24-560-4000 CLASSIC umodule LLE ADVANCED
Product description • Ideal for linear and panel lights • Luminous flux range 1,600 up to 4,540 lm • Efficacy upgrade of min. 5 lm/W (4,000 K) and min. 15 lm/W (3,000 K) • LED system solution with outstanding system efficacy up to 145 lm/W, consisting of linear LED modules and dimmable LED Driver LCAI 65W 150mA–400mA ECO lp • Efficacy of the module up to 168 lm/W • High colour rendering index CRI > 80 • Small colour tolerance MacAdam 31 • Small luminous flux tolerances • Colour temperatures 3,000 K, 4,000 K and 6,500 K • Perfectly uniform light, even if several LED modules are used together in a line • Push terminals for quick and simple wiring of LED module to LED module • Simple installation (e.g. screws) • Long life-time: 50,000 hours • 5-year guarantee È Standards, page 7 Colour temperatures and tolerances, page 10
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
1
LED light engine / OLED LED linear / area
Umodule STARK LLE-G3-24-280-2000 CLASSIC, LLE-G3-24-560-4000 CLASSIC umodule LLE ADVANCED
600 mA
Max. permissible LF current ripple
660 mA 780 mA / max. 10 µs
Max. permissible output voltage of LED Driver2
420 V
Insulation test voltage
1.84 kV
ESD classification
severity level 4
Risk group (EN 62471:2008)
1
Type of protection
IP00
125
14.8
125 Ø4.3
Ø4.3
77.3
125 139.8
LLE-G3-24-280-2000 1.65
Max. permissible peak current
279.6
2.8
Ø4.3
14.8 23.60
2.4
559.6 530 280 30
6.15
85 °C
Max. DC forward current
6.15
65 °C
tc
23.60
-30 ... +45 °C
tp rated
2.4
120°
Ambient temperature range
2.9
Beam characteristic
1.65
Technical data
Ø4.3
155 405
LLE-G3-24-560-4000 Ordering data Type
Article number
Umodule STARK-LLE-G3-24-280-2000-830-CLA 89602008
Weight per pc.
Umodule STARK-LLE-G3-24-280-2000-840-CLA 89602009
3,000 K
210 pc(s).
0.023 kg
4,000 K
210 pc(s).
0.023 kg
Umodule STARK-LLE-G3-24-560-4000-830-CLA 89602153
6,500 K
210 pc(s).
0.023 kg
3,000 K
180 pc(s).
0.042 kg
Umodule STARK-LLE-G3-24-560-4000-865-CLA 89602247
4,000 K
180 pc(s).
0.042 kg
6,500 K
180 pc(s).
0.042 kg
Umodule STARK-LLE-G3-24-280-2000-865-CLA 89602246
Umodule STARK-LLE-G3-24-560-4000-840-CLA 89602154
Data sheet 04/16-LED207-13 Subject to change without notice.
Colour Packaging temperature carton
www.tridonic.com
2
LED light engine / OLED LED linear / area
Specific technical data Type4
PhotomeTyp. Typ. tric luminous flux luminous flux code at tp = 25 °C3 at tp = 65 °C3
Typ. forward current
Min. forward Max. forward Typ. power Efficacy voltage voltage consumption at of the module at tp = 65 °C at tp = 25 °C tp = 65 °C3 at tp = 25 °C
Efficacy of the module at tp = 65 °C
Efficacy of the system at tp = 65 °C
Colour rendering index CRI
Operating mode HE at 300 mA STARK-LLE-G3-24-280-2000-830 830/349
1,750 lm
1,650 lm
300 mA
33.0 V
40.6 V
10.8 W
153 lm/W
152 lm/W
134 lm/W
> 80
STARK-LLE-G3-24-280-2000-840 840/349
1,790 lm
1,700 lm
300 mA
33.0 V
40.6 V
10.8 W
158 lm/W
156 lm/W
137 lm/W
> 80
STARK-LLE-G3-24-280-2000-865 865/349
1,910 lm
1,800 lm
300 mA
33.0 V
40.6 V
10.8 W
168 lm/W
165 lm/W
145 lm/W
> 80
STARK-LLE-G3-24-560-4000-830 830/349
3,500 lm
3,290 lm
300 mA
66.1 V
81.1 V
21.6 W
153 lm/W
152 lm/W
134 lm/W
> 80
STARK-LLE-G3-24-560-4000-840 840/349
3,570 lm
3,390 lm
300 mA
66.1 V
81.1 V
21.6 W
158 lm/W
156 lm/W
137 lm/W
> 80
STARK-LLE-G3-24-560-4000-865 865/349
3,820 lm
3,590 lm
300 mA
66.1 V
81.1 V
21.6 W
168 lm/W
165 lm/W
145 lm/W
> 80
Operating mode BLO at 350 mA STARK-LLE-G3-24-280-2000-830 830/349
2,020 lm
1,890 lm
350 mA
33.6 V
41.1 V
12.8 W
151 lm/W
148 lm/W
130 lm/W
> 80
STARK-LLE-G3-24-280-2000-840 840/349
2,070 lm
1,940 lm
350 mA
33.6 V
41.1 V
12.8 W
155 lm/W
152 lm/W
134 lm/W
> 80
STARK-LLE-G3-24-280-2000-865 865/349
2,190 lm
2,070 lm
350 mA
33.6 V
41.1 V
12.8 W
164 lm/W
161 lm/W
142 lm/W
> 80
STARK-LLE-G3-24-560-4000-830 830/349
4,030 lm
3,780 lm
350 mA
67.1 V
82.2 V
25.5 W
151 lm/W
148 lm/W
130 lm/W
> 80
STARK-LLE-G3-24-560-4000-840 840/349
4,140 lm
3,890 lm
350 mA
67.1 V
82.2 V
25.5 W
155 lm/W
152 lm/W
134 lm/W
> 80
STARK-LLE-G3-24-560-4000-865 865/349
4,380 lm
4,130 lm
350 mA
67.1 V
82.2 V
25.5 W
164 lm/W
161 lm/W
142 lm/W
> 80
Operating mode HO at 375 mA STARK-LLE-G3-24-280-2000-830 830/349
2,140 lm
2,020 lm
375 mA
33.7 V
41.3 V
13.8 W
149 lm/W
146 lm/W
128 lm/W
> 80
STARK-LLE-G3-24-280-2000-840 840/349
2,200 lm
2,070 lm
375 mA
33.7 V
41.3 V
13.8 W
153 lm/W
150 lm/W
132 lm/W
> 80
STARK-LLE-G3-24-280-2000-865 865/349
2,330 lm
2,200 lm
375 mA
33.7 V
41.3 V
13.8 W
162 lm/W
159 lm/W
140 lm/W
> 80
STARK-LLE-G3-24-560-4000-830 830/349
4,280 lm
4,030 lm
375 mA
67.4 V
82.6 V
27.5 W
149 lm/W
146 lm/W
128 lm/W
> 80
STARK-LLE-G3-24-560-4000-840 840/349
4,410 lm
4,140 lm
375 mA
67.4 V
82.6 V
27.5 W
153 lm/W
150 lm/W
132 lm/W
> 80
STARK-LLE-G3-24-560-4000-865 865/349
4,670 lm
4,390 lm
375 mA
67.4 V
82.6 V
27.5 W
162 lm/W
159 lm/W
140 lm/W
> 80
1 Integral 2 If
measurement over the complete module.
mounted with M4 screws and plastic washers.
3 Tolerance 4 HE
range for optical and electrical data: ±10 %.
... high efficiency, BLO ... best lamp operation, HO ... high output.
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
3
ACCESSORIES
LED light engine / OLED LED linear / area
LINEAR COVER SY
Product description • LINEAR COVER for LLE 24 • Protection against direct touch for non-SELV applications • Fast snap on mounting on to LLE 24 with clips or plastic washers • High transmission: transparent 94 %, semi-transparent 87 %, diffuse 76 % • Made of PMMA • Tolerances: ± 1 mm for 597 mm length (ends finished),
1.3±0.1
28.6±0.3
R1
7.
5
+ 20 mm for 1,200 / 1,500 / 1,600 / 1,800 mm legth (ends raw)
1.8 24+0.5/-0.4 35±0.5
Ordering data Type
Article number
LINEAR COVER SY Transparent 1600mm LINEAR COVER SY Frosted 1800mm
Length
Packaging carton
Weight per pc.
28000338 Transparent
1,600 mm
12 pc(s).
0.272 kg
28000437 Semi-transparent
1,800 mm
12 pc(s).
0.308 kg
LINEAR COVER SY Frosted 1600mm
28000339 Semi-transparent
1,600 mm
12 pc(s).
0.272 kg
LINEAR COVER SY Frosted 1500mm
28000435 Semi-transparent
1,500 mm
12 pc(s).
0.244 kg
LINEAR COVER SY Frosted 1200mm
28000422 Semi-transparent
1,200 mm
12 pc(s).
0.205 kg
LINEAR COVER SY Frosted 597mm
28000340 Semi-transparent
597 mm
12 pc(s).
0.102 kg
LINEAR COVER SY Diffuse 1800mm
28000438 Diffuse
1,800 mm
12 pc(s).
0.308 kg
LINEAR COVER SY Diffuse 1600mm
28000341 Diffuse
1,600 mm
12 pc(s).
0.272 kg
LINEAR COVER SY Diffuse 1500mm
28000436 Diffuse
1,500 mm
12 pc(s).
0.257 kg
LINEAR COVER SY Diffuse 1200mm
28000434 Diffuse
1,200 mm
12 pc(s).
0.205 kg
LINEAR COVER SY Diffuse 597mm
28000342 Diffuse
597 mm
12 pc(s).
0.102 kg
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
Colour
4
ACCESSORIES
LED light engine / OLED LED linear / area
ACL ENDCAP LLE24 PUSH-FIX
R R1 19.2 0. 5
Product description • ENDCAP for LLE 24 30.3
• Fast snap on mounting (sheet thickness 0.5 – 1.0 mm), for drilling hole 4 mm • Made of Polycarbonat
5
6
12
20.0 38.4
ACCESSORIES
Ordering data Type
Article number
ACL ENDCAP LLE24 PUSH-FIX
28001037 White
Colour
Packaging carton
Weight per pc.
480 pc(s).
0.003 kg
LINEAR LENS
Product description • Linear lens for LLE 24 • Available in 60° and 90° light distribution • Protection against direct touch for non-SELV applications • Fast snap on mounting on to LLE 24 with clips or plastic washers • High transmission: semi-transparent 97 % • Linear lense made of PMMA • Tolerances: ± 20 mm for 1,600 mm legth (ends raw) 90° 10.55
13.12
60°
24+0.2/-0.4
24+0.2/-0.4
32±0.5
32±0.5
Ordering data Type
Article number
ACL LINEAR LENS 24x1200mm 60° ACL LINEAR LENS 24x1200mm 90°
Packaging carton
Weight per pc.
28001428 semi-transparent 1,200 mm
21 pc(s).
0.196 kg
28001429 semi-transparent 1,200 mm
21 pc(s).
0.165 kg
ACL LINEAR LENS 24x1600mm 60°
28000953 semi-transparent 1,600 mm
21 pc(s).
0.261 kg
ACL LINEAR LENS 24x1600mm 90°
28000955 semi-transparent 1,600 mm
21 pc(s).
0.221 kg
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
Colour
Length
5
ACCESSORIES
LED light engine / OLED LED linear / area
CLIP 4.3mm
Product description • Clip for fixation of LED modules with 4.3 mm holes • Fast snap on mounting (sheet thickness 0.5 – 1.0 mm) • For drilling hole 4 mm
7.4
2.2±0.05
ø9
1.2
• Clip made of Polycarbonat
ø3.6
ø5.3 Ordering data sales quantity 500 pcs.
ACCESSORIES
1 Minimum
Type
Article number
Colour
Packaging bag1
Weight per pc.
ACL CLIP 4.3mm PUSH-FIX
28001036
White
500 pc(s).
0.001 kg
BRIDGE LLE24/40
Product description • Enables the fixation of 24 mm wide Tridonic LED modules to fixtures made for 40 mm wide modules • Ideal for extruded aluminium gear trays made for 40 mm modules with pre-alignment knobs • For LLE 24 with 280 mm module minimum 2 bridges required
5,8 2,8
• Clip-on for LINEAR COVER and LINEAR LENS2
4
3
• For LLE 24 with 560 mm module minimum 3 bridges required • Fixation via M3 or M4 countersunk screw, ø2,3
max. tightening torque 0.5 Nm
24,1 42
15
• BRIDGE made of white polycarbonate
31 Ordering data Type sales quantity 600 pcs. 2 Beam characteristics will change due to the elevated fixation (see photometric files for details). ACL BRIDGE LLE24/40 SCREW-FIX 1 Minimum
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
Article number
Colour
28001205
White
Packaging carton1 Weight per pc. 600 Stk.
0.001 kg
6
LED light engine / OLED LED linear / area
1. Standards
2.4 Heat sink values
IEC 62031 IEC 62471 IEC 61000-4-2
1.1 Photometric code Key for photometric code, e. g. 830 / 349 1st digit
2nd + 3rd digit
4th digit
5th digit
6th digit Luminous flux after 25% McAdam after of the life-time (max.6000h) Code CRI Code Luminous flux 25% of the Colour temperature in McAdam 7 70 – 79 7 ≥ 70 % life-time Kelvin x 100 initial 8 80 – 89 8 ≥ 80 % (max.6000h) 9 ≥90 9 ≥ 90 %
1.2 Energy classification Type STARK LLE-G3-24-280-2000 STARK LLE-G3-24-560-4000
Energy classification A++ A++
2. Thermal details 2.1 tc point, ambient temperature and life-time The temperature at tp reference point is crucial for the light output and life-time of a u product.
Umodule STARK LLE-G3-24-280-2000 ta tp Forward current 25 °C 65 °C 300 mA 25 °C 65 °C 350 mA 25 °C 65 °C 375 mA 35 °C 65 °C 300 mA 35 °C 65 °C 350 mA 35 °C 65 °C 375 mA 45 °C 65 °C 300 mA 45 °C 65 °C 350 mA 45 °C 65 °C 375 mA
Rth, hs-a 6.37 K/W 5.27 K/W 4.83 K/W 4.78 K/W 3.95 K/W 3.67 K/W 3.17 K/W 2.62 K/W 2.18 K/W
Cooling area 105 cm² 127 cm² 138 cm² 139 cm² 169 cm² 182 cm² 210 cm² 255 cm² 306 cm²
Umodule STARK LLE-G3-24-560-4000 ta tp Forward current 25 °C 65 °C 300 mA 25 °C 65 °C 350 mA 25 °C 65 °C 375 mA 35 °C 65 °C 300 mA 35 °C 65 °C 350 mA 35 °C 65 °C 375 mA 45 °C 65 °C 300 mA 45 °C 65 °C 350 mA 45 °C 65 °C 375 mA
Rth, hs-a 3.18 K/W 2.63 K/W 2.41 K/W 2.39 K/W 1.97 K/W 1.83 K/W 1.58 K/W 1.31 K/W 1.09 K/W
Cooling area 210 cm² 254 cm² 276 cm² 278 cm² 338 cm² 364 cm² 420 cm² 510 cm² 612 cm²
Notes The actual cooling surface can differ because of the material, the structural shape, outside influences and the installation situation. Depending on the heat sink a heat conducting paste or heat conducting film might be necessary to keep the specified tp temperature.
For umodule STARK LLE a tp temperature of 65 °C has to be complied in order to achieve an optimum between heat sink requirements, light output and life-time. Compliance with the maximum permissible reference temperature at the tc point must be checked under operating conditions in a thermally stable state. The maximum value must be determined under worst-case conditions for the relevant application. The tc and tp temperature of LED modules from Tridonic are measured at the same reference point. 2.2 Storage and humidity Storage temperature
-30 ... +80 °C
Operation only in non condensing environment. Humidity during processing of the module should be between 30 to 70 %.
2.3 Thermal design and heat sink The rated life of u products depends to a large extent on the temperature. If the permissible temperature limits are exceeded, the life of the umodule STARK LLE will be greatly reduced or the umodule STARK LLE may be destroyed.
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
7
LED light engine / OLED LED linear / area
3. Installation / wiring
3.4 Mounting instruction None of the components of the umodule STARK LLE (substrate, LED, electronic components etc.) may be exposed to tensile or compressive stresses.
3.1 Electrical supply/choice of LED Driver umodule STARK LLE from Tridonic are not protected against overvoltages, overcurrents, overloads or short-circuit currents. Safe and reliable operation can only be guaranteed in conjunction with a LED Driver which complies with the relevant standards. The use of uconverter from Tridonic in combination with umodule STARK LLE guarantees the necessary protection for safe and reliable operation.
Max. torque for fixing: 0.5 Nm. The LED modules are mounted onto a heat sink with min. 5 screws per module. In order not to damage the modules only rounded head screws and an additional plastic flat washer should be used.
If a LED Driver other than Tridonic uconverter is used, it must provide the following protection: • Short-circuit protection • Overload protection • Overtemperature protection
Chemical substance may harm the LED module. Chemical reactions could lead to colour shift, reduced luminous flux or a total failure of the module caused by corrosion of electrical connections. Materials which are used in LED applications (e.g. sealings, adhesives) must not produce dissolver gas. They must not be condensation curing based, acetate curing based or contain sulfur, chlorine or phthalate. Avoid corrosive atmosphere during usage and storage.
umodule STARK LLE must be supplied by a constant current LED Driver. Operation with a constant voltage LED Driver will lead to an irreversible damage of the module. Wrong polarity can damage the umodule STARK LLE.
3.5 EOS/ESD safety guidelines
If umodules LLE are wired in parallel and a wire breaks or a complete module fails then the current passing through the other module increases. This may reduce its life considerably. In addition there can be slight differences in light output caused by tolerances.
The device / module contains components that are sensitive to electrostatic discharge and may only be installed in the factory and on site if appropriate EOS/ESD protection measures have been taken. No special measures need be taken for devices/modules with enclosed casings (contact with the pc board not possible), just normal installation practice. Please note the requirements set out in the document EOS / ESD guidelines (Guideline_EOS_ESD.pdf) at: http://www.tridonic.com/esd-protection
umodule STARK LLE can be operated either from SELV LED Drivers or from LED Drivers with LV output voltage. umodule STARK LLE are basic isolated up to 420 V against ground and can be mounted directly on earthed metal parts of the luminaire. If the max. output voltage of the LED Driver (also against earth) is above 420 V, an additional isolation between LED module and heat sink is required (for example by isolated thermal pads) or by a suitable luminaire construction. At voltages > 60 V an additional protection against direct touch (test finger) to the light emitting side of the module has to be guaranteed. This is typically achieved by means of a non removable light distributor over the module. 3.2 Wiring in +
out –
Wiring examples L N
+ –
+
–
+
–
+
–
+
–
Udriver LCAI 65 W 150–400 mA ECO lp
4. Life-time 4.1 Life-time, lumen maintenance and failure rate The light output of an LED Module decreases over the life-time, this is characterized with the L value. L70 means that the LED module will give 70 % of its initial luminous flux. This value is always related to the number of operation hours and therefore defines the lifetime of an LED module. As the L value is a statistical value and the lumen maintenace may vary over the delivered LED modules. The B value defines the amount of modules which are below the specific L value, e.g. L70B10 means 10 % of the LED modules are below 70 % of the inital luminous flux, respectivly 90 % will be above 70 % of the initial value. In addition the percentage of failed modules (fatal failure) is characterized by the C value. The F value is the combination of the B and C value. That means for F degradation and complete failures are considered, e.g. L70F10 means 10 % of the LED modules may fail or be below 70 % of the initial luminous flux. 4.2 Lumen maintenance
3.3 Wiring type and cross section
Life-time declarations are informative and represent no warranty claim.
The wiring can be solid cable with a cross section of 0.2 to 0.75 mm². For the push-wire connection you have to strip the insulation (6–7 mm).
Forward current
tp L90 / B10 L90 / B50 L80 / B10 L80 / B50 L70 / B10 L70 / B50 temperature
350 mA 375 mA
wire preparation: 0.2 – 0.75 mm²
65 °C 65 °C
24,000 h 23,000 h
36,000 h 35,000 h
51,000 h >60,000 h >60,000 h >60,000 h 49,000 h >60,000 h >60,000 h >60,000 h
6 – 7 mm
Inserting stranded wires / removing wires by lightly pressing on the push button.
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
8
LED light engine / OLED LED linear / area
5. Electrical values 5.1 Typ. forward voltage vs. forward current LLE-G3-24-280-2000
LLE-G3-24-560-4000
500
600
450 500
350
Forward current [mA]
Forward current [mA]
400
300 250 200 150 100
400
300 200 100
50 0
34
33
35
0
36 37 38 Forward voltage [V]
39
40
60
41
65
70 Forward voltage [V]
75
80
5.2 Forward voltage vs. tc temperature 0,00 -0,02
Rel. forward voltage [V]
-0,04 -0,06 -0,08 -0,10 -0,12 -0,14 -0,16 -0,18
25
35
45
55 tc [°C]
65
75
85
LLE-G3-24-280-2000-8x0-CLA LLE-G3-24-560-4000-8x0-CLA The diagrams are based on statistic values. The real values can be different.
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
9
LED light engine / OLED LED linear / area
6. Photometric charcteristics 6.1 Coordinates and tolerances according to CIE 1931 The specified colour coordinates are central measured by a current impulse with typical values of module and a duration of 100 ms. The ambient temperature of the measurement is ta = 25 °C. The measurement tolerance of the colour coordinates are ± 0.01. 3,000 K x0 0.4284
Mittelpunkt
y0 0.4003
100
0,4200 0,4150
80 norm. intensity [%]
0,4100 0,4050 0,4000 0,3950 0,3900
60 40 20
0,3850
0 380
0,4500
0,4450
0,4400
0,4350
0,4300
0,4250
0,4200
0,4150
0,4100
0,3800
420
460
500
540 580 620 660 wave length [nm]
700
740
780
420
460
500
540 580 620 660 wave length [nm]
700
740
780
420
460
500
540 580 620 660 wave length [nm]
700
740
780
MacAdam Ellipse: 3SDCM
4,000 K x0 0.3771
Mittelpunkt
y0 0.3737
100
0,3950 0,3900
80 norm. intensity [%]
0,3850 0,3800 0,3750 0,3700 0,3650
60 40 20
0,3600
0 380
0,3950
0,3900
0,3850
0,3800
0,3750
0,3700
0,3650
0,3550
0,3600
0,3550
MacAdam Ellipse: 3SDCM
6,500 K x0 0.3078
Mittelpunkt
y0 0.3236
100
0,3450 0,3400
80 norm. intensity [%]
0,3350 0,3300 0,3250 0,3200 0,3150
60 40 20
0,3100
0,3300
0,3250
0,3200
0,3150
0,3100
0,3050
0,3000
0,2950
0,2900
0,3050
0 380
MacAdam Ellipse: 3SDCM
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
10
LED light engine / OLED LED linear / area
6.2 Light distribution
6.4 Relative luminous flux vs. operating current
The optical design of the umodule STARK LLE product line ensures optimum homogenity for the light distribution.
160 140
-10°
0°
10°
30°
-30°
100
120
20° 40°
relative intensity Iv/Iv, max
-40°
80
50°
-50°
60 -60°
60°
40
70° 80°
20 0
Rel. luminous flux [%]
-20°
-100 -80 -60 -40 -20
0
20
40
60
80 100
90°
100 80 60 40 20 0
225
250
275
300
325
350
375
400
425
450
475
Operating current [mA]
The colour temperature is measured integral over the complete module. The single LED light points can have deviations in the colour coordinates within MacAdam 7. To ensure an ideal mixture of colours and a homogenious light distribution a suitable optic (e. g. PMMA diffuser) and a sufficient spacing between module and optic (typ. 4 cm) should be used.
The diagrams are based on statistic values. The real values can be different.
For further information see Design-in Guide, 3D data and photometric data on www.tridonic.com or on request. 6.3 Relative luminous flux vs. tc temperature
rel. luminous flux [a.u.]
1,10
1,00
0,90
0,80
0,70
25
35
45
55 tc [°C]
65
75
85
Data sheet 04/16-LED207-13 Subject to change without notice.
www.tridonic.com
11
