Preview only show first 10 pages with watermark. For full document please download

Talking Clock With Alarm And Date

   EMBED

Share

Transcript

TIM-230-520-3721 Instructions for Talking Clock with Alarm and Date 1. Press the top button (talking key) of the clock to announce the time. Press again to announce the temperature. Press and hold the top button for “Sleep Mode." To exit the “Sleep Mode,” press and hold the top button of the clock. 2. In “Normal Time Display," press and hold the “Mode” key to change the setting modes status circularly as follows: Press “Mode” to set alarm sound – set alarm hour – set alarm minute – set year – set month – set date – set time hour – set minute - set 12/24 hour system – time set – temperature – set male/female sound – set timer If the display goes out of order, press the “Reset” key to restart the clock. Press the “Calendar” button to exit setting. Time Setting 3. In “Set Time Mode”, press “Set” button to adjust the hour and minutes respectively until the correct time is shown. Alarm Time Setting 4. In “Set Alarm Hour and Set Minute Mode," press the “Set” button to adjust the hour and minutes respectively until the correct alarm time is shown. 5. Press “Mode” to choose the Alarm On or Off as follows: Alarm Off – Alarm On Snooze Function 6. When the alarm time beeps, press any button to stop the alarm midway. When pressing the top button of the clock, the alarm will stop and then start again in 10 minutes. The alarm symbol will keep flashing while on snooze mode. Calendar 7. In “Set Year Mode," press “Set” to adjust the year setting. In “Set Month Mode,” press “Set” to adjust the month setting. In “Set Date Mode,” press “Set” to adjust the date setting. Press “Calendar” to announce the Day and Date. Chime Function 8. In “Normal Time Mode,” press the “Set” button to choose hourly report function On/Off.