Preview only show first 10 pages with watermark. For full document please download

Tb140 35c Carton Clamp Replacement Backrest Tubes 647073 Installation Instructions

   EMBED

Share

Transcript

March 1984 Number 140 35C Carton Clamp Replacement Backrest Tubes 647073 Installation Instructions MODELS: 35C Carton Clamps Replacement Backrest Tubes 647073 are available from the Cascade Parts Depot in Springfield, Ohio (513/322-1199). Install the new Backrest Tubes as follows: 0 Removethe defective backrest 0 Clean all surfaces to be welded. taminants. 0 Locate the new backrest back of this sheet. tube(s) tube(s) from the arm. Removepaint, on the arm. oil, Grind the area smooth. grease and other cont- Use the dimensions shown on the NOTE: If the short tube(s) are being replaced, saw the new tube(s) dimension shown on the back of this sheet. 01 Protect 0 Use AWS E-7018 all to match the adjacent components from weld splatter. good condition. procedures. electrodes Bake as to weld the tubes in place. Electrodes must be in required to remove all moisture per manufacturers 0. Weld around the backrest holding a close arc. 0 Clean the weld area and repaint tube with a fillet sized per the detail with Cascade paint drawing, P/N 668209. Part Number 674448 cascade” corporati P.O. Box 20187 l Portland, P.O. Box 360 l Springfield, Do you have questions you need answered right now? Oregon 97220 l (503) 666-l 511 Ohio 45505 * (513) 325-9271 L)lal Dtrectl~nc .-.-- Max. / Clean up any counterbore to pass capscrew after welding. / 6.60 L .06 Typical LEFT ARM SHOWN / @ Cascade Corporation 1984 2-84