Transcript
TCCt - TURTLE CAMERA CASE includes tr lley Expandable Camera Case may be used in carry on or trolly mode
Working mode
TCCT ORDER CODE KT / VA-014
Travel
L 22.4-28.4 57-74 cm
W
7-9 18-23 cm
H
13.4 34 cm
Wt. 9.9 lbs 4.5 Kg
KATA's TCCT meets the strict new airline regulations for carryon bag size. And its modularity means that when you land it adapts to hold your fully assembled camera in everyday use. The TCCT holds the camera with the battery removed; in some cases the viewfinder must be removed and with extremely large cameras the lens must be removed as well. The disassembled parts go into padded pouches in the case. To expand the case to its working position, the TCCT has a compartment that lengthens the case and a side compartment that makes it wider. Like the turtle's shell, the case and the extended compartments are padded and rigid at the same time, to protect their delicate contents. The detachable trolley makes its easier to carry the bag in the airport. In narrow check post you can remove the trolley in order to fit Airline Regulations Measuring Box.
mode
Insertrolley System DTS included with this model VG-DTS
Katas Unique Featur (See catalog for details)
Dual-use yellow aluminum buckles
Main compartment for camera Extendable front part for the lens
Optional snap-hook Pocket for lens cap
§ § § § § § § § §
APSS-shoulder strap (Patent) Dual-use Yellow Aluminum Buckle (Reg. des.) Interlocking Handles (Patent) Insertrolley System (Included) Toblerone Shock Absorbers Six Layers of Protection ID Window YELLOOP- Yellow Loop interior fabric On Board
MATERIALS Fabric: DuPontd 1000 denier Cordurad and specially fabricated Nycore with fluorocarbon based water-repellent finish on the outside and three layers of polyurethane coating on the inside.
Extendable side for viewfinder
Straps: High tenacity Polypropylene and Nylon webbing. Padding: Cross-linked Polyethylene-foam in shoulder straps and handles.
Interlocking handles are padded, and reinforced with PVC 6 layers of protection
Lens pouch
Pocket for cassettes or batteries
Zippers: Silent action YKKd coil and molded zippers. Buckles: ITWd and Duraflexd Nylon and Acetal buckles .
Viewfinder pouch
are included with the bag
Development & production by KATA Ltd. POB 45078 Jerusalem , Israel 91450
OPTIONS Snap-hooks, Set of 2, VG-DH Brick Battery Pack SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. DS010606.
Tel: + 972-2-5911000 Fax: + 972-2-5400504 www.kata-bags.com
1
Info:
[email protected]
KATA. A SIMPLE CASE
Sales:
[email protected]
OF BETTER DESIGN.
operating instructions Switching from work mode (Bag fully expanded and camera put together) into travel mode (Bag is shrinked to on board position and camera dismounted)
A) Preparing the bag 1) Take out the camera. 2) Empty the external pocket A . 3) Compress the extendable side for viewfinder pocket
B
:
From inside the bag pull the Velcro ribbon downward to
Pocket for E lens cap
flatten the extendable sides "roof". On the outside close the wrap around zipper K . 4) Compress the extendable front part
C
:
Release the velcro on the trolley handle (Back side of the case). Open the upper Velcro fastener
L
(in the front part C ).
Using one hand, remove the portable padded lining F by
C Extendable front part for the lens
pulling one of its rigid corners inward. Compress the pocket by closing the zipper
A
B Extendable side for viewfinder
M.
K
Pocket for cassettes or batteries
Close the snap hooks of the front mesh handle to shorten its length (Upper part). F Portable padded lining
L
C
M
b) Preparing the camera for packaging: 1) Pack the parts you have chosen to disassemble
G
in their individual pouches: Tripod plate (black pocket inside the bag) Lens pouch
I
Viewfinder pouch G Brick Battery pouch
H
(not included with the bag)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.DS010606.
2
H
I
c) Packing the camera in the bag: Option I: dismounted battery 1) Spread the portable padded lining F on the bottom of the bag so it doesnt take place 1 . 2) Place the camera with the lens in the direction of the extendable front part
C
.
3) Place the battery (inserted in pouch
H
) in the empty space
C
available. 1
Option II: dismounted lens 1) Place the camera with the lens in the direction of the extendable front part
C
F
.
Portable padded lining
2) Place the lens (inserted in lens pouch I ) in the space created between the camera and the bag's wall. 3) Place the original lens cap in the lens cap pocket
E
.
2
4) Place the U shape around camera to create separation between the camera and the dismounted lens 2 .
CAMERA F
Option III: dismounted lens and viewfinder
Portable padded lining
1) Place the camera with the lens in the direction of the extendable front part
C
.
2) Place the lens (inserted in lens pouch I ) in the space
LENS
between the camera and the bag's wall. 3) Place the original lens cap in the lens cap pocket
E
.
4) Place the U shape around camera to create separation between the camera and the dismounted lens 2 . 5) Place the viewfinder (inserted in viewfinder pouch G ) in the empty space available. G
H
I
d) dismount the trolley (only if necessary) 1) open the fastening velcro on the bag floor. 2) pull the trolley out of the sleeve and fold it.
Viewfinder in pouch
Battery in pouch
Lens in pouch
Packaging option I
Packaging option II
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 230303.
3
F
Lens in pouch
Packaging option III
F
Switching from travel mode (Bag is shrinked to on board position and camera dismounted) into work mode (Bag fully expanded and camera put together)
A) Assemble the camera (put the lens caps in pocket
).
E
B) Expand the bag: 1) Extend the front part a) Open the zipper
C
M.
b) Insert the portable padded lining F into the front part
E
with two ends facing up then fix it into place with the Velcro strap
L
.
2) Expand the side compartment
B
a) From the outside open the wrap around zipper K . b) From the inside fix the extendable sides "roof" into place
C
with the Velcro strap. 3) Place Lens pouch I in the mesh pocket and the Viewfinder
K
B
pouch G in the inside wall of the extendable side for
A
viewfinder. F Portable padded lining
L
C) Place the camera in the bag with the lens going in first into the extendable front part. D) Place cassettes or batteries in the external pocket
A
C
.
M
G
H
I
inside view
Development & production by KATA Ltd. POB 45078 Jerusalem , Israel 91450 Tel: + 972-2-5911000 Fax: + 972-2-5400504 www.kata-bags.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. 230303.
4
Info:
[email protected]
KATA. A SIMPLE CASE
Sales:
[email protected]
OF BETTER DESIGN.
