Transcript
®
top hat
Surface Mount
RF Transformer 50Ω
TCM1-43X+
10 to 4000 MHz
Maximum Ratings Operating Temperature Storage Temperature RF Power DC Current
Features
• wide bandwidth 10 to 4000 MHz • balanced transmission line • low insertion loss, 1.1 dB typ. • excellent return loss • aqueous washable
-40°C to 85°C -55°C to 100°C 0.4W 30mA
Permanent damage may occur if any of these limits are exceeded.
Pin Connections*
CASE STYLE: DB1627
+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
Applications
PRIMARY DOT 3 PRIMARY 1, 2 SECONDARY DOT 6 SECONDARY 4 GND 1, 2 NOT USED 5
• PCS • wideband push-pull amplifiers • cellular
Electrical Specifications at 25°C
Pin 1 and 2 must be connected together to form Config. K; We recommend grounding this side of the primary as shown in PL-364.
Outline Drawing
Reel Size 7” 13”
Parameter
Frequency (MHz)
Min.
Impedance Ratio
Typ.
Max.
Unit
4000
MHz
1
Frequency Range
Total thickness: .013 inches MAX.
and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500 1000, 2000
10
Insertion Loss
10-4000
—
1.1
3.0
dB
Amplitude Unbalance
10-4000
—
0.5
—
dB
Phase Unbalance
10-4000
—
7
—
Degree
PCB Land Pattern
Typical Performance Data FREQUENCY (MHz)
Outline Dimensions ( inch mm ) A .160 4.06
B .150 3.81
C .160 4.06
D .050 1.27
G .028 0.71
H .065 1.65
J .190 4.83
K .030 0.76
E .040 1.02
F .025 0.64 wt grams 0.15
10 100 500 1000 1500 2000 2500 3000 3500 4000
Config. K
1.09 1.02 1.04 1.02 1.01 1.04 1.11 1.17 1.33 1.67
AMPLITUDE UNBALANCE (dB)
18.38 20.93 19.48 18.69 18.63 18.16 17.10 17.44 17.30 14.24
0.42 0.91 3.57 5.58 6.61 6.88 6.85 5.21 3.05 1.66
TCM1-43X+ INPUT RETURN LOSS 25
1.8
1.4
20
15
10
1.0 0
500
0
1000 1500 2000 2500 3000 3500 4000 FREQUENCY (MHz)
500
TCM1-43X+ AMPLITUDE UNBALANCE
1000 1500 2000 2500 3000 3500 4000 FREQUENCY (MHz) TCM1-43X+ PHASE UNBALANCE
1.2
10 PHASE UNBALANCE (deg.)
AMPLITUDE UNBALANCE (dB)
PHASE UNBALANCE (deg.)
0.04 0.03 0.12 0.14 0.07 0.24 0.48 0.73 0.82 0.97
TCM1-43X+ INSERTION LOSS
2.2 INSERTION LOSS (dB)
Demo Board MCL P/N: TB-654+ Suggested PCB Layout (PL-364)
INPUT R. LOSS (dB)
RETURN LOSS (dB)
Suggested Layout, Tolerance to be within .002
INSERTION LOSS (dB)
1.0 0.8 0.6 0.4 0.2
8 6 4 2 0
0.0 0
500
1000 1500 2000 2500 3000 3500 4000 FREQUENCY (MHz)
0
500
1000 1500 2000 2500 3000 3500 4000 FREQUENCY (MHz)
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
REV. A M153178 TCM1-43X+ ED-14833/3 DJ/CP/AM 151002 Page 1 of 1
