Preview only show first 10 pages with watermark. For full document please download

Tcs Series

   EMBED


Share

Transcript

TCS OmniDeck™ — 3000 Series • Terreon® Deck with Integral Sink • Unique, Repairable Terreon Solid Surface Material • ADA and TAS Compliant units available • Drilled or Equipped with Faucets/Drinking Fountains • Optional Waste Receptacle openings • 4-Sided Drip Ledge around sink perimeter Specifications Terreon OmniDeck Model TCS Series features a solid surface counter top with integral sink(s) and coved backsplash. The Terreon OmniDeck comes equipped with faucet and drinking fountain or drilled for 4" centerset, 8" centerset or centershank faucet mounting – always check local codes and ordinances for compliance. Optional 4 sided drip ledge and deck mounted soap dispensers available. Strainer and P-trap included. Construction Bowl/Deck Constructed of Terreon, a densified solid surface material composed of polyester resin or Terreon®RE, a densified solid surface material composed of a biobased resin and preconsumer recycled granules. Terreon and TerreonRE are resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives. Terreon and TerreonRE are certified by NAHB to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-12001. Terreon and TerreonRE are GREENGUARD® certified as low-emitting materials. Code Compliance and Certifications ANSI Standards: Terreon and TerreonRE are certified by NAHB to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-1-2001. Juvenile Height Mounting The Terreon OmniDeck mounted with counter surface no higher than 31" is compliant with ADA Accessibility Guidelines for Buildings and Facilities: Buildings Elements Designed for Children’s Use; Final Rule. To be completely ADA compliant for juveniles, the Terreon OmniDeck must be equipped with juvenile ADA compliant faucet and/or drinking fountain, juvenile ADA compliant casework, and 5½" depth sink. Texas Accessibility Height Mounting The Terreon OmniDeck complies with all Texas Accessibility Standards (TAS) guidelines on reaches, clearances and operation for juvenile users. To comply with TAS for grades Pre-K thru 5 or 6, the rim height of the sink must be 30" maximum above finished floor. For grades 6 thru 8 or 9, the unit must be mounted with a rim height of 32" maximum above finished floor. To be completely TAS compliant for juveniles, the TCS Series must be equipped with TAS compliant faucet, TAS compliant casework, and 3½" depth sink. CSA Certified: Terreon OmniDeck model TCS is certified to US and Canadian standards through the Canadian Standards Association CSA B45, ASME A112.18.12011/CSA B 125.1-11. This plumbing fixture is designed for hand washing only. It is not Intended to dispense water for human consumption through drinking or for preparation of food or beverages. Certified to NSF/ANSI 372 Standard product selections contained within this document are third party CERTIFIED to NSF/ANSI 372 meeting the Lead-Free content requirement. Any product configured with custom options will be COMPLIANT with NSF/ ANSI 372 meeting the Lead-Free content requirement. Standard Height Mounting The Terreon OmniDeck mounted at standard height is designed to comply with all ADA guidelines on reaches and clearances. To comply with ADA, the rim height of the sink must be no higher than 34" above the finished floor. To be completely ADA compliant, the TCS Series must be equipped with ADA compliant faucet and/or drinking fountain, ADA compliant casework, and 5½" depth sink. Page 1 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series 22-3/4" (578mm) REF. 20-3/4" (527mm) REF. 22-3/4" (578mm) REF. 3-7/8" (98mm) 20-3/4" (527mm) REF. 5-7/8" (149mm) ø 3-1/8" (79mm) 15-3/4" (400mm) REF. 17-3/4" (451mm) REF. ø 3-1/8" (79mm) 15-3/4" (400mm) REF. 17-3/4" (451mm) REF. ø 5-3/4" (146mm) REF. ø 5-3/4" (146mm) REF. CS-2 CS-1 5½" undermount basin depth 3½" undermount basin depth 11" (279mm) REF. 22-3/4" (578mm) REF. 10" (254mm) REF. 8-3/8" (213mm) REF. 8-3/8" (213mm) 20-3/4" (527mm) REF. ø 3-1/8" (79mm) 15-3/4" (400mm) REF. 17-3/4" (451mm) REF. CS-3 8" undermount basin depth ø 5-3/4" (146mm) REF. ø 3" (76mm) 15" (381mm) REF. ø 5" (127mm) ø 5-3/4" (146mm) 14" (356mm) REF. CS-4 8" undermount basin depth NOTE: Undermount basins are attached to 1/2" Terreon solid surface material increasing basin depth by 1/2". All dimensions are reference and subject to change. Bradley Corporation reserves the right to make changes in design and material without formal notice and without incurring obligation. Verify all rough-in dimensions prior to installation. Page 2 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series 1-1/2" APRON 1/2" 1/2" *1/2" CABINETRY 17" REF 7-1/2" BOWL SHOWN BACK WALL SUBTRACT 2-1/2" FOR 5" BOWL SUBTRACT 4-1/2" FOR 3" BOWL 1-1/2" DIA. DRAIN STUB OUT 2" FROM WALL SINK DIMENSIONS HOLES SINK ROUGH-IN 4" CLR. HOLE SPOUT FAUCET 8" — 1-3/16"Ø 1-1/4"Ø C'SHANK — 1-3/16"Ø 1-3/8" DRK FTN SOAP 1"Ø — — 1"Ø — — — 1-3/16"Ø — 10-1/2" 7" 2-1/2" 1" 2-1/2" BACK SOAP BACK 1-1/2" SOAP 2" 4" 4" 1" 4" 5" 4" 10" BASIN REF 2-1/2" 16" BASIN REF 4" 4" 8" FRONT FRONT 2-1/2" DRK. FTN. 14" BASIN REF 2" DRK. FTN. 2-1/2" 2-1/2" 21" BASIN REF 2" FAUCET, DRINKING FOUNTAIN & SOAP DISPENSER PLACEMENT Page 3 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series Terreon® OmniDeck — TCS Series Faucet Dimensions 3° 10-1/8" (257) 5-1/4" (133) 1/16" - 1-1/4" (2-32) WARE THICKNESS AERADA™ 1000 SERIES GOOSENECK FAUCET 5-7/8" (149) 5-5/8" (143) 2-1/4" (57) MOUNT ELECTRONICS BOX ON FINISHED WALL (HARDWARE INCLUDED) 4" (102mm) 5-3/8" (137mm) 11-1/4" (286mm) 7-1/2" (191mm) Wristblade Handles – Gooseneck Faucet Part Number 269-878 7/8" (22mm) DIA. 2-3/8" (60mm) 4" (102mm) 6" (152mm) Single Lever – Gooseneck Faucet Part Number 269-1626 INLETS FOR 1/2" O.D. SLIP CONNECTION OR 1/4 IPS TAILPIECE 6-1/2" (165mm) REF. ø 2-1/8" (54mm) REF. ø 2-1/8" (54mm) REF. 5-3/8" (137mm) REF. 2" (51mm) 1-3/4" (44mm) 10-3/4" (273mm) REF. ø 7/8" (22mm) REF. 6" MAX. REF. Page 4 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS 2-1/8" (54mm) SHANKS 3/8" O.D. COPPER TUBING FOR 3/8" COMPRESSION CONNECTIONS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series Terreon® OmniDeck — TCS Series Soap Dispenser Dimensions 4" (102MM) 2-3/4" (70mm) Model 6324 DIMENSIONS Model A B Capacity 6324 71⁄8" (181mm) 2½" (64mm) 16 oz. 6324-67 5" (127mm) 2¾" (70mm) 16 oz. 6324-68 815⁄16" (227mm) 3¼" (83mm) 32 oz. 4" (102mm) MAX. MTG. THK. 2" (51mm) DIA. 13/16" (21mm) DIA. A (see chart) B (see chart) 3" REF 3-1/4" REF 3-11/16" REF 5-7/8" REF 1-7/8" REF 2" REF 2" REF 4" REF PUSH BUTTON OPERATED DRINKING FOUNTAIN NOTE: Some state and local codes require separate sinks for faucets and drinking fountains. Always check local codes and ordinances for compliance. Page 5 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series Instructions: Fill out the following form for each Terreon OmniDeck and include with your Bradley Fixture Order Form. Be sure to check off all boxes and fill in all blank spaces that pertain to your order. Incomplete forms will not be processed and will cause delays in shipment. * Any variance or deviation from the options below will require a signed, Bradley engineered submittal for order processing. Job Name: Location: Bradley Rep: Date: Approval: Modified TCS Series Models: REQUIRED L Qty. D OPTIONAL B1 B2 WR1 WR2 SH ____ TCS-0 (Terreon OmniDeck — No Sink) ____ TCS-1 (Single Bowl Terreon OmniDeck) ____ TCS-2 (Double Bowl Terreon OmniDeck) Use the diagrams on the following page to determine the appropriate dimensions for the Terreon OmniDeck to be filled in above. For example: If selecting a TCS-2, you must fill in L (length), D (depth), B1 (bowl 1 placement), B2 (bowl 2 placement). KEY: L......................... Length D........................ Depth B1..................... Placement of Bowl 1 B2..................... Placement of Bowl 2 WR1.............. Placement of Waste Receptacle 1 WR2.............. Placement of Waste Receptacle 2 SH.................... Splash Height NOTE: All dimensions for bowl placements must be from left to right (as indicated in the sample diagrams on the following page). All deck dimensions should be specified to the nearest ¼". SH — Backsplash exceeding 5" will not be covered and will be shipped loose. Important: If countertop overhang is desired on casework, add appropriate length and depth to deck when calculating dimensions. All OmniDecks are non-cancelable and non-returnable because they are made to specification for each other. Page 6 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series KEY: "L" = LENGTH L......................... Length WR2 D........................ Depth RECESSED DRIP LEDGE AROUND PERIMETER OF SINK (OPTIONAL) B2 B1..................... Placement of Bowl 1 B1 B2..................... Placement of Bowl 2 WR1 WR1.............. Placement of Waste Receptacle 1 WR2.............. Placement of Waste Receptacle 2 SH.................... Splash Height "D" DEPTH SINK 16" X 21" WASTE RECPT. 10" 11-1/2" FRONT EDGE 8-1/2" 26" MIN 30" MIN 28" MIN 8" MIN WASTE RECPT. SINK 14" X 10" "L" = LENGTH WR1 B2 B1 RECESSED DRIP LEDGE AROUND PERIMETER OF SINK (OPTIONAL) 4" "D" DEPTH 16-1/2" MIN WASTE RECPT. SINK 14" X 10" SINK 14" X 10" 2" 26" MIN 30" MIN "L" = LENGTH WR1 B2 4" B1 RECESSED DRIP LEDGE AROUND PERIMETER OF SINK (OPTIONAL) DIM. 9" x 9" "D" DEPTH SINK 16" X 21" SINK 16" X 21" WASTE RECPT. 2" 20" MIN Page 7 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS 36" MIN 28" MIN © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series Standard Selections (Must select one from each category) Sink Styles: CS-1 16x21" CS-2 16x21" CS-3 16x21" CS-4 10x14" Bowl 1     Bowl 2     Bowl 1     Bowl 2     Bowl 1      Bowl 2      Faucet Drilling Options (Choose from below only if “None” option from above was selected): 4" SET 4" Centerset 8" SET 8" Centerset 4" OFFSET — R 4" Center Offset Right 4" OFFSET — L 4" Center Offset Left SHANK Centershank NFD No Faucet Drilling Bowl 1       Bowl 2       Drinking Fountain Drilling Locations: LEFT Left Drinking Fountain Drilling RIGHT Right Drinking Fountain Drilling NDF No Drinking Fountain Drilling Bowl 1    Bowl 2    Drinking Fountain Options: DFPB DFDO NDF Push Button Activated Drinking Fountain Drilling Only No Drinking Fountain Bowl 1    Bowl 2    Soap Dispenser Options: 6324 6324-67 6324-68 NSD SDO 16 oz. Plastic Globe, 4" Spout 16 oz. Stainless Steel Globe, 4" Spout 32 oz. Plastic Globe, 4" Spout No Soap Dispenser Soap Drilling Only Bowl 1      Bowl 2      Sink Drip Ledge Options: DL NDL 4-Sided Drip Ledge Around Sink Perimeter No Drip Ledge Bowl 1   Bowl 2   Terreon Sink, 3½" Depth (TAS) Terreon Sink, 5½" Depth (ADA) Terreon Sink, 8" Depth Terreon Sink, 8" Depth Faucet Drilling Locations: LEFT RIGHT L R BACK NFD Terreon Sink, 8" Depth Faucet Options: GN-AC GN-DC WB SL None B IR Gooseneck w/ 6-volt Plug-in Adapter (AC) IR Gooseneck w/ Battery Power (DC) Gooseneck; 10" Spout, Dual Lever Gooseneck; 10" Spout, Single Lever No Bradley Faucet Page 8 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com TCS OmniDeck™ — 3000 Series Standard Selections (Must select one from each category) Waste Receptacle Opening (Location specified in chart on page 7):  WR-O No Waste Receptacle Opening  WR-1 One Waste Receptacle Opening  WR-2 Two Waste Receptacle Openings Edging Style Selection (select one):  RO Roundover RO Will deck be seamed?  SEAM-L Seamed on the Left  SEAM-R Seamed on the Right  SEAM-LR Seamed on the Left and Right  SEAM-BK Seamed on the Back  NONE No Seams Will Tempered Water Be Supplied to This Unit? (select one) Note: This question must be answered to determine bowl color options (see above).  TEMP  NO-TEMP Tempered (less than 110ºF or 43ºC) Not Tempered Deck Standard Colors:  ALP-WHT Alpine White  E-GRAY Empire Gray  AVALANCHE† Avalanche  GLACIER Glacier  BONE Mesa Bone  GRAPH Graphite  CHAR Charcoal Gray  LANNON Lannonstone  COBBLE Cobblestone  LONDON London Gray  DRIFT† Driftwood  MOONSTONE† Moonstone  DS-WHT Designer White  O-TAUPE Organic Taupe  DUNE† London Gray  PEBBLE Pebble Beach Designer Colors (available at an additional charge; non-cancelable and non-returnable):  ARC-CHIP Arctic Chip  RIVER Riverstone  COFFEE Coffee Bean TerreonRE Colors (available at an additional charge; non-cancelable and non-returnable):  BIRCH-BARK Birch Bark  MOONDUST Moon Dust  DUSK Dusk  OAT Oat Color of Terreon Bowl Color Selection (select one):  ALP-WHT Alpine White  O-TAUPE  BONE Mesa Bone  SAME  DS-WHT Designer White  LONDON London Gray  PEP-WHT  POLAR†  SAND  S-CREEK  S-MIST  WHT-SAND Peppered White Polar Ice Sandtrap Stone Creek Silver Mist White Sand Organic Taupe Same as Deck (Requires Tempered Water) Side Apron Options (Front apron standard, standard height of 1.5):  LSA Left Side Apron  RSA Right Side Apron  BSA Both Side Aprons  ASA All Side Aprons (Island)  NONE No Side Aprons Side Splash Options (Shipped Loose, Height indicated as SH in chart on page 6):  LSS Left Side Splash  RSS Right Side Splash  BSS Both Side Splashes  NONE No Side Splashes Back Splash Options (Height indicated as SH in chart on page 6) [select one]:  BS Backsplash  NBS No Backsplash Terreon Adhesive Seam Kit (180-day Shelf Life):  AS-K Adhesive Seam Kit Color ___________________ Qty (one Adhesive Seam Kit recommended per seam) Bracket (Optional):  TBRKT2 Mounting Bracket(s) with Terreon Strip (Decks 23¼" - 26" deep) † This color contains large, randomly distributed chips. Page 9 of 9 4/17/2015 This information is subject to change without notice. Bradley_Sink_OmniDeck_TCS © 2015 Bradley P.O. Box 309, Menomonee Falls, WI 53052-0309 800 BRADLEY (800 272 3539) +1 262 251 6000 bradleycorp.com