Preview only show first 10 pages with watermark. For full document please download

Tcx-15b

   EMBED


Share

Transcript

datasheet C O M PA C T S E R I E S E N G I N E E R I N G I N F O R M AT I O N The TCX-15B is a bandpass sub-bass loudspeaker and includes internal rigging points that designed to complement TCX series mid/ allow it to be suspended in permanent high cabinets in a wide range of installed installations using M10 eyebolts. A music sound reinforcement applications. pole mount socket is provided to allow It consists of a 15” low frequency driver in a bandpass loaded enclosure designed for extended low frequency response. When used with Turbosound Loudspeaker Management Systems, TCX loudspeakers can be controlled and monitored over a BVNet TCX-15B two-way cabinets to be mounted at the correct height above the subwoofer. The rear connector panel provides two Speakon NL4 connectors for input and loop-out functions, wired in parallel with a 4-way barrier strip connector. network using TurboDrive™ control software. Constructed from 5/8” (15mm) birch plywood, the cabinet is available in black or white textured paint as standard, FEATURES Bandpass loading Compact cabinet Pole mount socket Internal rigging points Speakon NL4 and barrier strip connectors APPLICATIONS Mobile DJ Corporate / industrial House of Worship Live music venues datasheet TCX-15B DIMENSIONS (HxWxD) NET WEIGHT COMPONENTS FREQUENCY RESPONSE POWER HANDLING SENSITIVITY MAXIMUM SPL NOMINAL IMPEDANCE CONSTRUCTION C O M PA C T S E R I E S E N G I N E E R I N G I N F O R M AT I O N 600mm x 500mm x 600mm (23.6” x 19.7” x 23.6”) 35.5kg (78lbs) 1 x 15” (380mm) LF driver 28Hz - 150Hz ±10dB, 35Hz - 125Hz ±3dB 1000 watts continuous, 2000 watts program 95dB 1w @ 1m 125dB continuous, 131dB peak 8 ohms 15mm (5/8”) birch plywood FINISH Black or white semi-textured paint GRILLE Powder coated perforated mild steel CONNECTORS (2) Neutrik Speakon NL4MP, wired pin 1+: positive, pin 1- : negative, pins 2+ and 2- N/C (1) 4-way barrier strip connector FLYING HARDWARE page 2 (8) M10 internal rigging points SPARES AND LS-1532 15” LF loudspeaker ACCESSORIES RC-1532 Recone kit PA-90 Speaker pole 90cm PA-100 Speaker pole 100cm datasheet C O M PA C T S E R I E S E N G I N E E R I N G I N F O R M AT I O N TCX-15B FREQUENCY RESPONSE TCX-15B (dB) Sound pressure level 102 96 90 84 78 72 66 60 20 30 40 50 60 70 80 100 Frequency (Hz) page 3 datasheet TCX-15B INSTALLATION HARDWARE C O M PA C T S E R I E S E N G I N E E R I N G I N F O R M AT I O N TCX mid/high loudspeakers can be mounted at the correct height above the TCX-15B low frequency cabinet using Turbosound straight poles of various heights. PA-90 speaker pole page 4 datasheet TCX-15B ARCHITECTURAL & ENGINEER’S SPECIFICATIONS C O M PA C T S E R I E S E N G I N E E R I N G I N F O R M AT I O N The system shall be of the low frequency type consisting of one 15” (381mm) LF driver. Performance specifications of a typical production unit shall meet or exceed the following: Frequency response, measured with swept sine wave input, shall be flat within ±10dB from 28Hz to 150Hz, and within ±3dB from 35Hz to 125Hz. Power handling shall be 1000 watts continuous, 2000 watts program. Maximum SPL (peak) measured with music program at stated amplifier input shall be 131dB. Dimensions: 600mmH x 500mmW x 600mmD (23.6”H x 19.7”W x 23.6”D). Weight: 35.5kg (78lbs). The loudspeaker system shall be the Turbosound TCX-15B. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verify that the above combined performance / size specifications are equalled or exceeded. [11.8”] 300mm DIMENSIONS TOP [23.6”] 600mm [23.6”] 600mm [19.7”] 500mm FRONT SIDE REAR BOTTOM TCX-15B version 1.0 06/10 TURBOSOUND LTD Star Road Partridge Green West Sussex RH13 8RY United Kingdom tel: +44 (0) 1403 711447 fax: +44 (0)1403 710155 • www.turbosound.com