Transcript
TD-15M CRAWLER DOZER LGP
Net Horsepower 142 kW (190 hp)
Operating Weight 21 595 kg (47,606 lb)
Blade Capacity 3.6 m3 (4.7 yd3)
TD-15M
CRAWLER DOZER LGP n Low ground pressure n Modular design n Excellent drawbar pull
n Fine grading abilities in soft, swampy areas n Joystick for transmission and steering module control
ENGINE
STEERING & BRAKING
* Make and Model ......................................... CUMMINS 6CTAA 8.3 Type ......................................... 4-cycle diesel turbocharged, CAC, direct start, direct injection ** Gross Horsepower @ 2200 rpm .......................... 153 kW (205 hp) *** Net Flywheel power @ 2200 rpm ........................ 142 kW (190 hp) Maximum torque @1400 rpm ........................... 994 Nm (733 lb ft) Number of cylinders ..................................................................... 6 Displacement ............................................................ 8.3 l (505 in3) Bore and Stroke ............................... 114 x 135 mm (4.49" x 5.32") Lubrication, full flow filtering .........................................full pressure Number of main bearings ............................................................. 7 Electrical system ...................................................................... 24 V Air cleaner ..................................... dry type with exhaust aspirated primary and safety elements and service indicator * Meets EU Stage II and EPA Tier 2 emission regulations ** Output for complete engine operating under SAE J1995 conditions *** Output of standard engine complete with fan, air cleaner, muffler, alternator (not charging), water pump, lubricating oil pump and fuel pump, per SAE J1349
TRANSMISSION & TORQUE CONVERTER Modular, countershaft type power shift, electro-hydraulic control. Preset travel speed selection and auto-downshift. Single stage 330 mm (13") torque converter with a 2.5:1 stall ratio drives to transmission through a double universal joint.
TRAVEL SPEEDS Gear
Range
Forward km/h (mph)
Reverse km/h (mph)
1 st
Low High
2.9 3.9
1.8 2.4
3.4 4.6
2.1 2.9
2 nd
Low High
5.2 6.9
3.2 4.3
6.1 8.1
3.8 5.0
3 rd
Low High
8.2 10.8
5.1 6.7
9.6 12.6
5.9 7.8
POWER SHIFT
100
TRACK FRAME All-welded heavy box section track frame is kept in alignment with track frame guides providing true vertical oscillation. Track rollers each side .................................................................. 8 Top idlers each side ..................................................................... 2 Front idlers (drum type) ................................................................ 1 All rollers and idlers ........................................... lifespan lubricated Oscillation at center of front idler ............................ 353 mm (13.9")
Liter Fuel tank ............................................................... 388 Cooling system ....................................................... 40 Crankcase w/filters .............................................. 22.3 Transmission system ............................................ 153 Final drives, each side............................................. 40
40
80 70
1st LOW
30
1st HIGH
kg x 1000
DRAWBAR PULL x 1000 LB
Double-reduction module provides desired gear reduction at the sprocket. Ring-type sprocket distributes wear evenly over track bushings, letting every tooth ride free one-half of the time to reduce wear. Final drives or sprockets are replaceable without removing track frames.
REFILL CAPACITIES
DRAWBAR PULL vs. SPEED
90
50
FINAL DRIVES
50
110
60
Two speed geared steering module provides gradual turns while maintaining full power to both tracks plus conventional clutch-brake performance for tight or pivot turns. This type of steering system offers superior traction in all types of operations and terrain. Coupled to 3speed transmission, the 2speed steering provides 6 speeds forward and 6 reverse. The left hand joystick controls transmission and steering drive for up and down shifting, steering Hi/Lo selection and LH/RH gradual turn. Foot pedal applies both brakes for parking and downhill control. Brakes are spring applied and hydraulically released.
(US gal) (102.5) (10.6) (5.9) (40.4) (10.6)
2nd LOW 2nd HIGH
20 40 30 20
WEIGHT (Operating)
3rd LOW
10
3rd LOW
Includes standard equipment, cab w/ROPS, blade and full fuel ................................... 21595 kg (47,606 lb)
10 0
km/h
0 0
0
2
1
4
2
6
SPEED 3
4
8
5
10
6
12
7
8
mph
3.35 m (11' )
* 3.45 m (11' 3.8")
E
B A D C
3.05 m (10 ')
2.16 m (7' 1") 3.10 m (10' 2")
4.22 m (13 ' 10 ")
* OVERALL HEIGHT w/Canopy ROPS/FOPS 3.50 m (11' 5.6") VERTICAL DIMENSIONS INCLUDE 64 mm (2.52") GROUSER HEIGHT
OVERALL DIMENSIONS WITH EQUIPMENT Length with drawbar, blade straight
5.52 m (18 ' 1.3 ")
Width over trunnions
3.34 m (10 ' 11.3 ")
BLADE SPECIFICATIONS BLADE
STRAIGHT
Blade capacity, SAE J1265
3.6 cu. m (4.7 cu. yd)
Blade dimensions: width over end bits height
3860 mm (152 ") A
1100 mm (43 ")
Max. lift, straight
B
1240 mm (49 ")
Max. drop below ground level
C
500 mm (19.7 ")
Max. tilt adjustment
D
698 mm (27.5 ")
Max. angle of pitch
E
9°
Weight of blade equipment
2740 kg (6,040 lb)
TRACKS Track shoes width
940 mm (37 ") 43
Track shoes, each side m2
Ground contact area
5.73
Ground pressure
36.9 kPa (5.4 psi)
Height of grouser
64 mm (2.52 ")
Track adjustment
full hydraulic
Ground clearance
445 mm (17.5 ")
(8,880 in2)
Fixed drawbar height from ground to centerline of 89 mm (3.5") clevis
533 mm (21")
TD-15M
CRAWLER DOZER LGP HYDRAULIC CONTROL SYSTEM Pump, tandem gear, driven from torque converter. Output @ 17.2 MPa (2,500 psi) & 2444 engine rpm................................................. 178 l/min (47 gal/min) Relief valve setting........................................................ 17.2 MPa (2,500 psi)
Cylinders, bore and stroke: blade lift....................................................... 101.6 x 1095 mm (4" x 43.1") tilt ................................................................. 139.7 x 147 mm (5.5 " x 5.8 ") Reservoir with sight gauge, right fender mounted ..................... 60 l (16 gal)
STANDARD EQUIPMENT Air cleaner, dry type with exhaust aspirated primary and safety elements and service indicator Alarm, back-up Alternator, 50 A Antifreeze, -37°C (-34°F) Batteries, (2) 12 V, 815 CCA, maintenance free Brakes, foot, spring applied, hydraulic released Canopy 2 post ROPS/FOPS (SAE J1040, J231) with seat belt (SAE J386) Coolant filter conditioner Cooling module; includes radiator, transmission oil cooler, hydraulic oil cooler, charge air cooler; isolation mounted Decelerator right and brake center, foot operated Diagnostic centers for power train and equipment hydraulic pressures Ecological drains for engine oil, radiator coolant and hydraulic oil Engine hood, solid, sloped Exhaust pipe extension w/elbow Fan, blower
Filters engine, oil, full flow and by-pass, with replaceable spin-on elements Filters, power train Final drive seal Fuel strainer Guards; crankcase, hinged, with front pull hook, fan, sprocket rock deflector and dirt deflector, transmission, track chain guides (center only) Hitch, retrieval Horn, electric Hydraulic control, 2-spool valve, 1 lever (lift/tilt) Instruments: Gauges: fuel level, engine coolant temp., engine oil pressure, torque converter oil temp., voltmeter, hourmeter, brake lock Warning lights: air cleaner filter, transmission oil filter, hydraulic oil filter, transmission/clutch oil low pressure Audible & visual warning system: low engine coolant level, low engine oil pressure Lights with guards, 2F 2R
Seat, suspension, fabric cover (for use w/cab) Drawbar, fixed Engine enclosures: Perforated side doors and hood Perforated side doors and solid hood Perforated engine hood Ether start Exhaust pipe extension w/guard, for sweeps Guards: Crankcase, severe service w/front pull hook Tank guard, bolted Track roller, full length Transmission, severe service Hydraulic controls: 1 spool valve, 1-lever 3 spool valve, 2-lever
Muffler, under engine hood, insulated Radiator guard door, hinged Receptacle, starting/charging Seat, deluxe, suspension type, vinyl cover, adjustable with arm rests swivel 15° to right Starting, 24 V Steering, planetary type, 2 speed, left hand single lever control (joystick) Tools compartment Torque converter, single stage Track adjusters, hydraulic Track chain, sealed and lubricated (LTS) with split master link, 43 links Track chain guides, integral Track frame, 8 roller, 2.16 m (85") gauge, oscillating type, lifespan lubricated rollers and idlers Track shoes, 940 mm (37 ") extreme clipped corner with bolt holes for 3 rd rail track Transmission power shift, 3 speeds forward, 3 reverse, preset travel speed selection and auto-downshift Water separator, fuel system
OPTIONAL ATTACHMENTS AM/FM CD radio (for use with cab) Batteries, cold start (2) 12 V, 960 CCA Blade Equipment Straight Dozer, 3.6 cu. m (4.7 cu. yd.) Hydraulic tilt Cab and ROPS Equipment: Air conditioner /heater/pressurizer/defroster, underseat mounted, A/C condenser behind roof mtd. Air recirculation system with MSHA external filter Cab w/sound suppression, 4 wipers w/washers, inside mirror, dome light, tinted safety glass and air recirculation system Heater/pressurizer/defroster ROPS for cab or forestry attachment Sweeps, forestry, front and rear Screen, rear
Lights for Canopy ROPS/FOPS, 2F 2R Lights for cab, 2F 2R Mirrors, 2 pcs. exterior (for use w/cab) Screening pkg: cab for screens installation must be ordered Screens for cab windows (front, rear, side and doors) bolted, black painted Screens for tractor and cab lights (black painted Sound suppression package Starting/charging receptacle plug assembly Steering, clutch brake single speed Third rail track system Tools, 17 items in metal box Track shoes 940 mm (37 "), swamp type, cast
Specifications subject to change without notice. Illustrations and pictures may include optional equipment and may not include all standard equipment.
MS-3088-DSS2
July 2005
©2005 Marketing Services, Dressta Co. Ltd.
