Transcript
TDM over IP International Department 2010-7-15 www.raisecom.com www.raisecom.com /
RAISECOM TDM over IP TDMoIP Specification 4 E1/T1 TDMoIP product 1 E1/T1 TDMoIP product
How to config Nview NNM V5 GUI
www.raisecom.com /
TDMoIP product family
RC1201 2GESTM1 RC1201-2GESTM1 Central
RC1201 2FEV35 RC1201-2FEV35 Remote
RC1201 2FEE1T1 RC1201-2FEE1T1
1 E1T1
RC1201 4FE4E1T1 RC1201-4FE4E1T1
4 E1T1
RC1201 GE16E1T1 RC1201-GE16E1T1
16 E1T1
STM1/OC-3 E1T1 capacity www.raisecom.com /
TDMoIP specification • • • • • • • • •
Support SAToP, CESoPSN, TDMoIP, and HDLC PSN type: MPLS, IP, and Ethernet Maximum bundle number: 64 E1/T1 clock mode: internal, loopback, adaptive, external, and common Compliant to G.823, G.824 Unbalanced/balanced E1, balanced T1 Configurable jitter buffer Compliant to G.8261, support 2% scrambling and packet loss Configurable Ethernet transmission unit
www.raisecom.com /
Ethernet specification • • • • • • • • • • • •
Maximum transmission unit: 1632 bytes Rate limiting per port, 62k – 1000M non-linear Broadcast, multicast and DLF storm control per port 4K active 802.1Q VLAN, double tagging (Q-in-Q) 802.3x and back pressure flow control 8K MAC address table entry, 30 static MAC addresses Configurable MAC address learning per port Configurable MAC aging time 0 – 3825s QoS support, 4 output queues Port isolation BPDU, LACP and 802.1x transparent relay Ethernet port loopback detection www.raisecom.com /
E1 specification • • • • • • • • • • •
Compliant to G.703, G.704, G.706, G.732 and G.823 Connector type: BNC for unbalanced, RJ45 for balanced Impedance: 75 Ohm unbalanced, 120 Ohm balanced Data rate: 2.048Mbps Line code: HDB3 Frame structure: unframed, framed, multiframe, with or without CRC4 Clock compliant to G.823 Jitter compliant to G.823 Electrical characteristic: G.703 Transform characteristic: G.823 Unbalanced/balanced auto sensing www.raisecom.com /
T1 specification • Compliant to ANSI T1.403, AT&T TR-62411, ITU-T G.703, G.704 and G.824 • Connector type: RJ45 for balanced • Impedance: 100 Ohm balanced • Data rate: 1.544 Mbps • Line code: B8ZS, AMI, B7ZS • Frame structure: unframed, SF, and ESF • Clock compliant to G.824 • Jitter compliant to AT&T TR-62411, G.824 • Electrical characteristic: G.704 • Transform characteristic: G.824 www.raisecom.com /
Basic clocking mode Internal timing mode
Loopback timing mode
www.raisecom.com /
Basic clocking mode (cont.) Adaptive timing mode
External timing mode
www.raisecom.com /
RC1201-4FE4E1T1 front panel SNMP port
Gigabit Ethernet interface
Fast Ethernet interfaces
Console port
Power supply module
•1U 19’ standalone in metal enclosure, single power supply, less than 13W •Transmit 4 x E1/T1 services over PSN network (IP, MPLS, Ethernet) •4 x FE and 1 x GE (SFP) for local and line Ethernet connection •CLI/SNMP management www.raisecom.com /
RC1201-4FE4E1T1 rear panel Unbalanced BNC
Balanced RJ45
4 x E1/T1 interfaces
Expansion slot
•Unbalanced and balanced E1 interfaces •Balanced T1 interfaces •Expansion card for E1/T1 clock input/output www.raisecom.com /
Expansion cards
RC1201-SC-SYNC E1/T1/2MHz clock input/output, CC3 connector
www.raisecom.com /
RC1201-2FEE1T1/V35 front panel SNMP port
Gigabit Ethernet interface
Fast Ethernet interfaces
Console port
Power supply module
•1U 19’ standalone in metal enclosure, single power supply, less than 13W •Transmit 1 x E1/T1 or V.35 services over PSN network (IP, MPLS, Ethernet) •2 x FE and 1 x GE (SFP) for local and line Ethernet connection •CLI/SNMP management www.raisecom.com /
RC1201-2FEE1T1 rear panel Unbalanced BNC
Balanced RJ45
1 x E1/T1 interfaces
•Unbalanced and balanced E1 interfaces •Balanced T1 interfaces
•V.35 interface
1 x V.35 interfaces www.raisecom.com /
Application •Point to mutimuti-point transmission application based on Packet Switched Network
www.raisecom.com /
Application (cont.) •Point to point transmission application based on Packet Switched Network
•Transmission based on Packet Switching Networks for voice and Ethernet multiplexer
www.raisecom.com /
Application (cont.) •Serial data services moved to Packet Switched Networks
www.raisecom.com /
RAISECOM TDM over IP TDMoIP Specification 4 E1T1 TDMoIP product 1 E1T1 TDMoIP product
How to config Nview NNM V5 GUI
www.raisecom.com /
Device basic configuration current running configuration of this nodes: snmp-server community public ro //SNMP MGT configuration snmp-server community private rw …… device description RC1201-4FE4E1T1-Raisecom^Technology^Co.,^Ltd. double-tagging tpid 9100 no use-core-tag trunk disable mac-address-table aging-time 0 mac-address-table learning disable qos qos queue fix-priority qos map cos-queue 4 4 2 2 1 1 4 4 ip-address 10.10.10.4 255.0.0.0 //IP address of the device device clock master osc device clock fallback osc !post-config commands: exit clock timezone + 8 0 www.raisecom.com /
E1/T1 interface configuration Interface ID: 1 Interface Descr: tdm port-1 //description PortSendcode: e1HDB3 //line code Interface type: balance //interface connector type Ds1 type: E1 //interface type Loopback config: no Loopback Frame mode config: unframed //frame mode for E1/T1 CRC4 config: enable //E1 CRC4 status T1 Signaling mode config: none //T1 signaling DS0 idle code: 255 //TDM port unuse ds0 idle code Tx Clock Source Config: recovery clock //transmit clock source Clock Recover Bundle: 1 //bundle id used for adaptive clock LineStatus: LOS //link status
www.raisecom.com /
Bundle configuration Raisecom(config-bundle/0/1)# sho interface Bundle ID: 1 //bundle ID Bundle Descr: bundle-1 //description Bundle Connection Config: enable //connection status Destination Bundle ID: 1 //destination bundle ID Jitter Buffer: 8 //jitter buffer size Bundle Payload Type: SAToP //bundle payload type SAToP Frame Length: 32 //payload length in the frame TDM Port Index: 1 //E1/T1 port number Bundle PSN Type: UDP/IP //PSN type IP Version: IPV4 //IP version Destination IP Address: 10.10.10.5 //destination IP address IP TOS: 0 //IP ToS IP TTL: 255 //IP time to live Next Hop Address Type: IP //next hop address type Next Hop Address: 10.10.10.5 //next hop address Tag Vlan Mode: Untag //VLAN mode Bundle Status: Normal
//current bundle status
Bundle Statistic: //bundle statistics Bundle Transmit Packet: 68083175 Bundle Receive Packet: 68084355 Bundle Discard Packet: 0
www.raisecom.com /
Bundle info. Raisecom(config-bundle/0/1)# show bundle info Jitter Buffer Underflow: ...(7) Jitter Buffer Overflow: ...(0) Max jitter buffer level(ms): ...(252.33) Min jitter buffer level(ms): ...(0.00) Max jitter buffer deviation(ms): ...(250.00) //statistics JB in last time quantum Packet per second: ...(426) //Frame per second Required IP bandwidth(bps): ...(2167488) //calculate IP BW of Bundle Required Ethernet bandwidth(bps): ...(2215200) //calculate ETH BW of Bundle Packetization delay(ms): ...(2.34) //packet creation time End to End delay(ms): ...(253.34) //single trip delay
www.raisecom.com /
Ethernet interface configuration Interface ID :1 Descr :Slot 0 eth interface 1 Interface type :electrical Port enable(command) :enable Port enable status :enable AutoMdi config :enable AutoMdi status :enable Link status :cross Autonego config :enable Autonego status :enable Duplex config :full-duplex Duplex config status :half-duplex Duplex status :half-duplex Speed config status :10M Speed status :10M Flow control config:off Flow control status:off Link :linkdown RJ45 interface
Interface ID :1 Descr :Slot 0 fx-ge interface 1 Interface type :optical Port enable(command) :enable Port enable status :enable Flow control config:off Flow control status:off Als config:enable
SFP fiber interface www.raisecom.com /
SNMP MGT configuration
Interface:snmp Administration Status : up Operation Status : down //status Description: SNMP-MGT-Interface //description Internet address: 192.168.6.99 Netmask: 255.255.255.0 //IP address Ethernet address: 00:01:02:03:04:05 //MAC address Duplex:full-duplex Speed:100baseT Autonegotiation:enable www.raisecom.com /
In-band MGT configuration
interface vcc ip address 192.168.12.1 255.255.255.0 //IP address of VCC vlan id 101 //VLAN ID of VCC
www.raisecom.com /
RAISECOM TDM over IP TDMoIP Specification 4 E1T1 TDMoIP product 1 E1T1 TDMoIP product
How to config Nview NNM V5 GUI
www.raisecom.com /
Nview NNM V5 GUI Topology Management function of TMN
www.raisecom.com /
Nview NNM V5 GUI Initiated device management view
www.raisecom.com /
Nview NNM V5 GUI Equipment Snapshot
www.raisecom.com /
Nview NNM V5 GUI TDM interface configuration
www.raisecom.com /
Nview NNM V5 GUI FE port Configuration & SFP interface management
www.raisecom.com /
Nview NNM V5 GUI Alarm management
www.raisecom.com /
www.raisecom.com www.raisecom.com /
