Technical And Commercial Specifications For Steering

Transcript

Parrot MULTICAN ™ Steering Wheel Mounted Control Kit www.parrot.com FOR STEERING WHEEL CONTROL OF PARROT CK3000 EVOLUTION™ AND CK3100 LCD™ CAR KITS CAN BUS KIT Technical and commercial specifications Parrot MULTICAN Steering wheel mounted control kit Voltage specifications Operating current: 12 volts (DC) Maximum power consumption: 30mA Stand-by mode: < 1mA Dimensions Length: Width: Height: Weight: 2.25 in. (57 mm) 2.25 in. (57 mm) 0.75 in. (20 mm) 3.5 oz (100 g) Package content 1 Parrot MULTICAN control box 1 R-Ladder bus cable 1 Female bullet terminal connectors 1 Installation guide Documentation Directions for use, user guide on our site: www.parrot.com PARROT, INC. NORTH AMERICA HEADQUARTERS 7000 NORTH MOPAC, 2ND FLOOR AUSTIN, TEXAS 78731 USA TEL (512) 514-6840 FAX (866) 902-7173 1401-1007 Hands on the wheel Complete control The Parrot MULTICAN kit adapts a vehicle’s existing steering wheel audio controls to work with a Parrot Bluetooth® hands-free car kit. The components and wiring are hidden from view, so original equipment appearance is preserved. Steering wheel controls will retain their original control functions, and will also control the Parrot car kit main functions without interference. The Parrot MULTICAN is designed to integrate perfectly with steering wheel audio controls. If there aren’t enough control buttons, the MULTICAN will designate a combination of buttons to compensate for it. The use of a Parrot MULTICAN with a Parrot hands-free car kit brings all calling controls to the steering wheel where the driver’s hands and fingers already are. Intuitive use of the controls helps drivers stay calm cool and connected. OEM compatibility Designed to work on a variety of CAN bus equipped vehicles, the Parrot MULTICAN is currently compatible with 15 makes. For the most up-to-date vehicle coverage information, visit: www.parrot.com About CAN technology Controller Area Network (CAN) technology is a serial bus standard originally developed in the 1980s by Bosch for connecting and interfacing electronic control units. CAN was specifically designed to work in the electromagnetically ‘tough’ environment found in vehicles. Today, the CAN bus is used in many embedded control environments that require strong protection against magnetic field interference. Visuals and technical specifications are subject to change without notice. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Parrot S.A. in under license. All rights reserved. The Parrot trademarks appearing on this document are the sole and exclusive property of Parrot S.A. All the other trademarks are the property of their respective owners and are used under license by Parrot S.A.