Technical Data Picosub

Transcript

Technical Data PicoSub we amplify emotions. 2 PicoSub ad-systems // we amplify emotions General Information The PicoSub complements the PicoSpot down to the lowest octaves forming up a full-fledged sound reinfocement system. It incorporates a 12“ long travel transducer with a light weight neodymium magnet. This makes a low weight of just 19 kilogrammes possible. Its Polyurea coated enclosure is enormously robust and the perfectly matched tuning guarantees a tight and smooth low frequency reproduction. Application compact subwoofer for PicoSpot Fixed installation Conference rooms, TV shows etc. Pubs, Bars, mobile DJs Features 12“ neodymium long-travel woofer high power handling for perfect dynamics light and compact Weather proof enclosure made of Baltic birch plywood Finished with black Polyurea coating, RAL colours optionally PicoSub Specifications Performance data Basic layout Bass reflex Frequency response (-6 dB) 44 Hz - 370 Hz Sensitivity 1W @ 1 m 92 dB (full space) Maximum SPL 125 dB (SPL peak @ 1 m) Horizontal coverage (-6 dB) Omnidirectional Vertical coverage (-6 dB) Omnidirectional Power handling RMS 450 W programme 900 W peak 1,800 W Nennimpedanz 8Ω Transducers / Components Low frequency 12“ long travel Nd woofer w/ 3“ voice coil, membrane w/ moisture repellent coating Nominal impedance 8Ω Power handling 450W AES / 1,800 W Peak Sensitivity 92 dB, 1W @ 1W High frequency - Nominal impedance - Power handling - Sensitivity - Horn - Crossover - Physical data Enclosure cuboid, 15mm birch plywood, heavily braced, Polyurea coated Rigging points - Colour black; white and RAL standard colours optionally Protective grille sheet steel w/ 2mm thickness, hex-stamped, powder coated, black acoustic foam on inside Connectors 2 x Speakon NL4 MP (2+/2-) Dimensions (W x H x D) 500 x 360 x 400 mm Net weight 21 kg 3 PicoSub 4 ad-systems // we amplify emotions Measurement Data Processed frequency response Impedance [dB] Sound pressure [ohm] Impedance 105 80 100 72 95 64 90 56 85 48 80 40 75 32 70 24 65 16 60 8 55 20 50 100 200 500 1k Frequency [Hz] iF: PicoSub Crossover Mode 0 20 50 100 200 iF: PicoSub Impedance Notes on performance data and graphs: 1) Performance Specifications: All acoustic specifications rounded to nearest whole number. Either AD Impulse DSP Amplifiers or external DSP with provided settings are required to achieve the specified performance. 2) Frequency response: Range of the processed response, where the level stays within 6dB from nominal sensitivity. 3) Power Handling: Is based on the AES power handling of the transducers. 4) Nominal Sensitivity: SPL produced by the unit at 1 Watt at nominal impedance, referenced to 1 Meter. Measurement condition: Full space in the far field of the speaker. Time-windowed to approximate an anechoic environment. 5) Maximum SPL: Calculated from nominal sensitivity at stated peak input power. 6) Resolution: For better readability a 1/6 octave smoothing is applied to all response graphs shown. All data provided are subject to change without prior notice. 500 1k Frequency [Hz] PicoSub Accessories For best protection during transport a padded cover made of durable polyester fabric is available. 7011000161 PicoSub transport cover, padded 5 6 PicoSub ad-systems // we amplify emotions Drawings Spare parts 7100000426 12“ LF transducer tba. 12“ Recone kit 7100000107 Spare grille PicoSub Architectural & Engineering Specifications The professional compact low frequency loudspeaker system shall incorporate one 12 inch long travel transducer with neodymium magnet. The transducer shall be mounted in an optimally tuned bass reflex enclosure. The loudspeaker shall withstand short peaks of up to 1,800 Watt generating a maximum sound pressure level of 125 dB. System frequency response shall vary no more than +/-3dB from 44Hz to 370Hz measured on axis. The loudspeaker enclosure shall be rectangular in shape, constructed of weatherproof Baltic birch plywood, employ extensive internal bracing and finished in black Polyurea coating. Optionally all RAL standard colours shall be available. The loudspeaker components shall be protected by a powder coated grille made of hex-stamped sheet steel and internally attached acoustic foam in appropriate colour. The enclosure shall be equipped with a threaded M20 pole mount receptacle and rubber feet. Input connectors shall be dual Neutrik NL4 Speakon. The loudspeaker system shall be the ADSystems PicoSub. Optional features: Padded transport cover Special colours: all standard RAL colours Technical specifications: Acoustical design: Point source, passive subwoofer, bass reflex Components: 12” neodymium woofer w/ 3” voice coil Power handling (nominal): 450 W Power handling (programme): 900 W Power handling (peak): 1,800 W Nominal sensitivity: 92 dB (full space) Maximum sound pressure level: 125 dB Frequency response: 44 Hz – 370 Hz Nominal coverage pattern (h x v): omnidirectional / array dependent Nominal impedance: 8 Ohm Features: Enclosure: 15mm Baltic birch plywood, rectangular shape, Polyurea coated Protective grille: hex-stamped sheet steel, powder coated Rigging hardware: none Connectors: 2x Neutrik NL4 Speakon Front design: Acoustic foam in appropriate colour behind the grille Dimensions (W x H x D): 500 x 360 x 450 mm Net weight: 21 kg CAAD simulation data: ULYSSES, EASE Brand: AD-Systems Model: Touring PicoSub 7 8 PicoSub ad-systems // we amplify emotions For more information please visit our website! There you will find also: Autocad Files (DXF, DWG, PDF) Measurement data for acoustical simulation in Ease and Ulysses Manuals Architectural & Engineering Specs AD-Systems Audiotechnik GmbH Am Schornacker 11c D-46485 Wesel T: +49 (0) 281 4 60 90 7-0 F: +49 (0) 281 4 60 90 7-22 E: [email protected] W: www.ad-systems.com Der Inhalt dieser technischen Information wurde nach dem aktuellem Stand der Technik und mit größter Sorgfalt angefertigt. Eine Haftung für mögliche Irrtümer und Fehler, die aus dieser technischen Information abgeleitet werden, lehnt AD-Systems Audiotechnik GmbH ab. As part of a policy of continual improvement, AD-Systems reserves the right to change specifications witout notice.