Preview only show first 10 pages with watermark. For full document please download

Technical Data Sheet 19“ 3hu Preconnect Distribution Module

   EMBED


Share

Transcript

Technical Data Sheet 19“ 3HU PreCONNECT® Distribution Module-Panel For up to 144 channels (288 fibers) 3HU Module-Panel for installation in 19“ cabinets and racks. Hole pattern acc. to DIN IEC 60297-3 in 84 divided units (DU) ready to accept up to 12 single 3HU-7DU patchfield part-front-plates. The following two types of back planes are deliverable: 1) The so-called “Z-Blade back plane” to accept 12 of our factory assembled ® PreCONNECT -Trunks as shown below. 2) The so-called “Tertiary-Cable back plane” to fix our factory assembled ® PreCONNECT Simplex-, Duplex- and Break-Out-Cables with cable ties as shown at the next page. Our factory assembled „Plug-and-Play“ ® FO cabling system PreCONNECT -Trunk 240 mm 3HU = 132 mm 19“ = 483 mm 3HU-7DU patchfield part-front-plate This panel system is a modular and through this highly flexible platform for FO cabling with all cable types ® of our factory assembled „Plug-and-Play“ FO cabling system PreCONNECT with all common patchfield connectivity systems. ® Different patchfield connectivity systems and fiber types in different PreCONNECT cable types can be installed in one Module-Panel through the modular design. Fast and easy „Plug-and-Play“ installation and secure service (e.g. cleaning or repair) through the modular design. Individual front labeling possible through labeling fields at each patchfield part-front-plate. Doc.-No.:DS_3HE_TRE_oe_004 Valid since: 2005-01-24 Rosenberger OSI Fiber Optics GmbH & Co. KG Created: 2004-12-13/by:HJ Changed: 2005-01-24/by:HJ www.osi-fiber.de Page 1 of 2 Phone: +49 821 24 92 40 Technical Data Sheet 19“ 3HU PreCONNECT® Distribution Module-Panel The so-called “Z-Blade back plane” to accept 12 ® of our factory assembled PreCONNECT -Trunks. Cable guidance 45° slant backwards. Picture with serial top-cover. The so-called “Tertiary-Cable back plane” to fix our factory assembled ® PreCONNECT Simplex-, Duplex- and BreakOut-Cables with cable ties. Cable guidance straight backwards. Material and color: Body and front: Aluminum, silver anodized Weight: - 3HU Module-Panel unassembled (empty): Approx. 2 kg - 3HU-7DU patchfield part-front-plate: Approx. 0,1 kg Delivery form: 3HU-7DU patchfield part-front-plate completely factory assembled incl. - FO couplers - labeling field and screws 3HU Module-Panel completely factory assembled with the required rear-wall type Doc.-No.:DS_3HE_TRE_oe_004 Valid since: 2005-01-24 Rosenberger OSI Fiber Optics GmbH & Co. KG Created: 2004-12-13/by:HJ Changed: 2005-01-24/by:HJ www.osi-fiber.de Page 2 of 2 Phone: +49 821 24 92 40 GEHÄUSE 90 PANELS 19” 3 HE PRECONNECT® VERTEIL-BAUGRUPPENTRÄGER 19” 3 HU PRECONNECT® DISTRIBUTION MODULE PANEL für bis zu 144 Kanäle (288 Fasern) for up to 144 channels (288 fibers) 3 HE Baugruppenträger mit Lochmuster gemäß DIN IEC 60297-3 in 84 Teileinheiten (TE) zum Einbau in 19“-Schränke in Verteilern gemäß ISO/IEC 11801, ISO/IEC 24702 und DIN EN 50173-Familie. Für die Aufnahme von bis zu 12 einzelnen 3 HE - 7 TE Patchfeld-Teilfrontplatten. 3 HU module panel with hole pattern acc. to DIN IEC 60297-3 in 84 divided units (DU) for installation in 19” racks in distributors acc. to ISO/IEC 11801, ISO/IEC 24702 and EN 50173 family. Ready to accept up to 12 single 3 HU - 7 DU patch field part front plates. Mit zwei Rückwandtypen lieferbar (siehe Seite 91): 1. „Z-Blech Rückwand“ für die Aufnahme von 12 unserer werkskonfektionierten „Plug-and-Play“ LWL-Verkabelungssysteme PRECONNECT®-Trunk ausgelegt. 2. „Tertiärkabel-Rückwand“ zur Abfangung von Simplex-, Duplex- und Break-Out-Kabeln mit Kabelbindern. Deliverable with two back plane types (see page 91): 1. “Z-blade back plane” designed to accept 12 of our factory assembled “Plug-and-Play” FO cabling systems PRECONNECT®-Trunk. 2. “tertiary cable back plane” to support simplex-, duplex- and break out cables with cable ties EIGENSCHAFTEN Properties • Rückwandtypen gemäß Beschreibung oben und Darstellungen auf Seite 91 • Der Baugruppenträger ist eine modulare Plattform für verschiedene Patchfeld-Stecksysteme und LWL-Fasertypen. • individuelle Frontbeschriftung möglich durch Beschriftungsleisten auf jeder Patchfeld-Teilfrontplatte • Material und Farbe: Korpus und Front: Aluminium, silber eloxiert • Gewicht: Baugruppenträger unbestückt ca.: 2,0 kg Patchfeld-Teilfrontplatte bestückt ca. 0,1 kg • back plane types as described above and shown at page 91 LIEFERFORM Delivery form • Patchfeld-Teilfrontplatten komplett werksmoniert inkl. LWL-Kupplungen, Beschriftungsleiste und Befestigungsschrauben • Baugruppenträger komplett werksmontiert mit entsprechender Rückwand • patch field part front plates completely factory assembled incl. FO couplers, labeling and screws ZUBEHÖR Accessories • siehe Seite 91 • see page 91 • the module panel is a modular platform for different patch field connectivity systems and FO fiber types • individual front labeling possible with labeling fields on each patch field part front plate • material and color: body and front: aluminum, silver anodized • weight: module panel unassembled approx.: 2.0 kg patch field part front plate assembled approx.: 0.1 kg • module panel completely factory assembled with corresponding back plane PANELS GEHÄUSE 19” 3 HE PRECONNECT® VERTEIL-BAUGRUPPENTRÄGER 19” 3 HU PRECONNECT® DISTRIBUTION MODULE PANEL ABMESSUNGEN Dimensions 436 37.5 236 57.1 132 = 3 HE/HU 7 19" = 483 465 427 35.2 BESTELLNUMMER für Einzelkomponenten part number for single components 19“ 3 HE PRECONNECT® VERTEIL-BAUGRUPPENTRÄGER für Patchfeld-Teilfrontplatten mit „Z-Blech-Rückwand“ für die Aufnahme von 12 unserer werkskonfektionierten „Plug-and-Play“ LWLVerkabelungssysteme PRECONNECT®-Trunk 141A0000 19“ 3 HU PRECONNECT® distribution module panel for patch field part front plates with „Z-blade back plane“ designed to accept 12 of our factory assembled “Plug-and-Play” FO cabling systems PRECONNECT®-Trunk. 19“ 3 HE PRECONNECT® VERTEIL-BAUGRUPPENTRÄGER für Patchfeld-Teilfrontplatten mit „Tertiärkabel-Rückwand“ zur Abfangung von Simplex-, Duplex- und Break-Out-Kabeln mit Kabelbindern 141A0007 19“ 3 HU PRECONNECT® distribution module panel for patch field part front plates with „tertiary cable back plane“ to support simplex-, duplex- and break out cables with cable ties 3 HE-7 TE BLIND-TEILFRONTPLATTE - 3 HU-7 DU blind part front plate 141A0002 3 HE -7 TE PATCHFELD-TEILFRONTPLATTEN mit Kupplungen bestückt 3 HU-7 DU patch field part front plates assembled with couplers ANZAHL FASERN number of fibers 1 STECKSYSTEM connectivity system SM MM 50 µm MM 62,5 µm 12 SC»SC-Duplex SC»ST-Duplex ST»ST-Duplex E-2000™»E-2000™1 E-2000™ HRL»E-2000™HRL1 141A0143 141A0153 141A0123 141A0803 141A0813 141A0043 141A0053 141A0033 141A0873 - 141A0043 141A0053 141A0033 141A0873 - 24 MU»MU-Duplex Horizontal LC»LC-Duplex 141A0175 141A0135 141A0185 141A0165 141A0195 141A0175 = Typ/type R+M 91