Transcript
Cable Mapper & Toner for Coax and LAN Kit - CM-17 Find & identify multiple coax and lan cables in main cable boxes For use on cables for CATV, network cables, Satellite Installations, audio video Equipment, CCTV and security & alarm installations. This is an 8 Way Coaxial & Lan Cable Mapper & Toner Kit. Kit contains: Cable Mapper & Toner Eight numbered & color coded cable identifiers. #1 White, #2 Red,#3 Black, #4 Blue, #5 Green, #6 Yellow, #7 Purple & #8 Brown. (Numbered & color coded) 9 RJ45 adapters, 8 with F81 barrel/in-line connectors, 1 for use with the cable mapper Cordura Case Instruction Sheet Features include:
Built-in tone generator Auto power off 30 minutes in "Tone" mode Test for Opens and shorts Auto power off 12 seconds after Pass/Fail results Maximum cable length for testing 4,000 feet Powered by two 3V CR2032 batteries Low battery warning light Maximum DC cable resistance 100 Ohms Live Voltage detection NOTE: This Cable Mapper & Toner will not test cable runs with AC or DC voltage present, Power Amplifiers, Isolation Splitters, Attenuators, Directional Line Tap, Power Dividers or Matching Transformers & DC blocking devices ALSO NOTE: This tool does not test if a LAN cable is good, it only identifies (maps) the cable
