Transcript
TECHNICAL DATA SHEET Cleanroom SpillEx – Gamma Irradiated 1.
INTERNATIONAL ARTICLE NUMBER : 150739
2.
PRODUCT CLASSIFICATION: Disposable floor cloth
3.
COMPOSITION: Top side: Polyethylene film Inner core: Super absorbent material Bottom side: Polypropylene spun bond non-woven (hydrophilic treatment)
4.
TECHNICAL DATA: Typical Value
Unit
45
g
51 x 37
cm
Total absorbency per cloth, tap water
1.2
L
Total absorbency per cloth, NaCl 0.9 %
0.5
L
Weight Size of cloth
5.
PRODUCT PROPERTIES & PRODUCT USAGE Highly absorbent material ideal for removing of all kinds of water-based spills Lightweight and ultra-thin construction quickly moves liquid to absorbent core Water-impermeable film on bottom side for hygienic removal after use High concentration of super absorbent material for holding high volume of liquid without dripping Very high liquid absorbency. One pad absorbs 500-1200 mL of liquid in application Ideal for pre-cleaning to remove liquid contaminations, followed by mopping step Application areas examples: - spill removal from floors and hard surfaces - drip catching barrier pad underneath equipment and working areas - work surface spill/splash control Exposed to Gamma Radiation with dosage of > 20 kGy Low particle shedding: (Particle testing in accordance with IEST-RP-CC003.3) Single pack, doubled bagged with gamma indicator dot Storage life: 12 months - expiration date on product label Designed for use in cleanroom class ISO 4-9 (GMP class A-C) Application: Place with non-woven side down on the spill for 30-120 seconds, depending on liquid composition Place with non-woven side up for drip and leak conditions Do not use SpillEx for high concentrated chemicals. Do not stand on or cut SpillEx
6.
STORAGE, TRANSPORTATION & DISPOSAL Keep palletized products in a cool and dry place. Avoid exposure to direct sunlight. Product is not subject to transportation regulations for hazardous substances or chemicals. Disposal via landfill or incineration possible.
7.
QUALITY APPROVALS / COMPLIANCE WITH INTERNATIONAL STANDARDS This product is manufactured conforming to appropriate standards within FHCS Quality System. SpillEx is not made from hazardous materials
Date: 2016/01/11 FREUDENBERG HOME AND CLEANING SOLUTIONS GMBH Regional Technical Centre Europe Höhnerweg 2 -4, Bau 149 69469 Weinheim, Germany
E-Mail:
[email protected] www.vileda-professional.com Telefon: +49 (0) 6201 80 - 4336 Fax: +49 (0) 601 88 - 4339
All information contained herein is given according to our specifications and best knowledge without any warranty or guarantee and can be changed without further notice. The suitability of our products to our customers specific applications and conditions of use has to be determined by our customers. In particular, product users shall not be released from their duty to check all health, safety and environment relevant properties of the delivered goods under their specific conditions of use.
