Technical Data Sheet Code Cx4c0 Version 3

Transcript

TECHNICAL DATA SHEET COAX 4 FOAM FB14 PE code version date page CX4C0 3 2006-02-10 1/2 APPLICATION Coaxial cables used in cabled distribution networks designed according the European Standard EN 50117 operating at frequencies between 5 MHz and 2150 MHz and the International Standard IEC 1196. CONSTRUCTION 1 2 3.1 3.2 4 1 2 3.1 3.2 4 Solid soft annealed copper Gas injected PE Copper Annealed copper PE according the European Standard HD 624. Inner conductor Dielectric Foil Braid Sheath REQUIREMENTS AND TEST METHODS Test methods in accordance with European standard EN 50117-1. Mechanical characteristics 1. Inner conductor. Diameter: 2. Dielectric: Diameter: Centricity: Adhesion: 3. Outer conductor: Diameter screen: Foil overlap: Coverage braid: 4. Sheath: Diameter: Tensile strength: Elongation at break: 5. Cable: Crush resistance of cable: Storage/operating temperature: Minimum installation temperature: Maximum tensile strength of cable: Minimum static bend radius: Total weight: 2.23 mm ± 0.03 mm 10.2 mm ± 0.2 mm ≥ 0.85 35 – 350 N at 50 mm 11.0 mm ± 0.3 mm ³ 4 mm 59 % ± 5 % 13.8 mm ± 0.3 mm ≥ 10 N/mm2 ≥ 300 % < 1% (load of 700N) -40°C to +70°C -5 °C 400 N 150 mm 170 g/m ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner TECHNICAL DATA SHEET COAX 4 FOAM FB14 PE Electrical characteristics Mean characteristic impedance: Regularity of impedance: DC loop resistance: DC resistance inner conductor: DC resistance outer conductor: Capacitance: Velocity ratio: Insulation resistance: Voltage test of dielectric: Screening efficiency 30-1000 MHz: Transfer impedance Return loss at 5-30 MHz: 30-470 MHz: 470-862 MHz: 862-2400 MHz: Attenuation at Nominal 5 MHz: 0.6 dB/100m 50 MHz: 1.9 dB/100m 100 MHz: 2.8 dB/100m 200 MHz: 4.0 dB/100m 400 MHz: 5.9 dB/100m 600 MHz: 7.4 dB/100m Maximum attenuation is 10 % higher. code version date page CX4C0 3 2006-02-10 2/2 75 ± 3 W > 46 dB £ 9.0 W/km £ 4.5 W/km £ 4.5 W/km 54 pF/m ± 2 pF/m 0.82 ± 0.02 > 104 MW.km 3 kVdc ³ 100 dB < 1.9 mOhm/m ³ 26 dB* ³ 26 dB* ³ 23 dB* ³ 18 dB* *Max. 3 peak values 4 dB lower than specified. Attenuation at 800 MHz: 1000 MHz: 1350 MHz: 1750 MHz: 2150 MHz: 2400 MHz: REVISIONS # Description Nominal 8.8 dB/100m 10.0 dB/100m 11.9 dB/100m 13.9 dB/100m 15.7 dB/100m 16.8 dB/100m Date Initials Belden declares this product to be in compliance with the environmental regulations EU RoHS (Directive 2002/95/EC, 27 January 2003); this is valid for all material produced after the RoHS compliant date for this product. ã Belden Wire & Cable B.V. All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner