Preview only show first 10 pages with watermark. For full document please download

Technical Data Sheet Ipa Presaturated Wipes

   EMBED

Share

Transcript

CHEMTRONICS Technical Data Sheet TDS# SIP91P IPA Presaturated Wipes PRODUCT DESCRIPTION IPA Presaturated Wipes remove solder paste, inks and other contaminants. These highly effective cleaning wipes are ideal for all general cleaning applications. In addition, IPA Presaturated Wipes are well suited for touch-up cleaning of automatic printer stencils and cleaning of semi-automatic printer stencils during and at the end of production runs. IPA Presaturated Wipes contain ultra-pure Electronics Grade IPA. The wipes are available in a convenient dispensing tub for stencil and screen cleaning applications.       Plastic Safe Lint free Quick drying formula Flammable Regular Cleaning Strength Upper Ozone Safe; CFC/HCFC Free AVAILABILITY SIP91P 100 Presaturated Wipes TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Specific Gravity Solubility in Water 0.81 Soluble Evaporation Rate <1 (Ether = 1) Appearance Clear, Colorless Liquid Flash Point (TCC) 61o F Percent Volatile 100% Shelflife 2 years COMPATIBILITY IPA Presaturated Wipes are generally compatible with most materials. As with any chemical product, component compatibility must be determined on a non-critical area prior to use. USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. IPA Presaturated Wipes: General cleaning: Wipe surfaces thoroughly to remove contaminants. Stencil cleaning: Wipe away residual solder paste until surface is thoroughly cleaned. Repeat with a clean wipe to remove any trace contaminants. TECHNICAL & APPLICATION ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. 0.0% 0.0% 0.0% VOC HFC ODP 91% 0.0% 0.0 CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is zero. NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888 REV. B (08/13) DISTRIBUTED BY: